I'm trying to recreate a program that uses javascript to open a connection to a PLC and then display all sorts of information on a web page. I'd rather have it in a form in MS Access for various reasons, and have spent forever trying to find the right dll to use (Jet32X.dll, if anyone is curious). I finally tracked the CLSID called out in the javascript back to a registered class for the PLC, and I'm trying to create that object in VB code. It won't get any further than the Dim As New line, however, throwing runtime error 429: "Active X Component Cannot Create Object." Really wish I had some more information about why.
I know the class is registered, since that's how I found it in the first place. I know the DLL file isn't corrupted, since the program runs fine from the JS version. I have a sneaky suspicion that there's some sort of incompatibility going on here, since the PLC and supporting software is pretty old, and I'm working in Microsoft Access 2013 (and its associated VBA). I can't really think of a good way to verify this, however. Does anyone have any other ideas? Could anything else be causing this problem?
Figured it out; in case anyone else runs into this sort of issue:
32bit COM dlls will not run in 64bit applications. If you don't want to go back and reinstall 32bit versions of whichever application you're using, one of the easiest workarounds is using dllhost.exe as a surrogate.
You can read a little about it here, but I found this tutorial easier to follow.
I send a new reply just to recap the information and avoid anyone that stumbles in the same problem again after me wasting precious time. All the steps involved assume that you already correctly registered the dll you are trying to use.
How to make a 32bit COM Dll work in a 64bit application
The "easy" solutions involve using the Dll Surrogate method, which runs dllhost.exe and as an intermediary process in 64bit to expose the underlying 32bit dll. When done correctly this works seamlessly without any special measure needing to be taken in neither in the 32bit dll nor in the 64bit application.
There are two main approaches to this:
Using Oleview.exe (i.e. using a GUI)
Oleview can be obtained downloading the Window 10 SDK.
In order to use Oleview it you have to:
Download the Window 10 SDK at the following link:
https://developer.microsoft.com/en-us/windows/downloads/windows-sdk/
Go to C:\Program Files (x86)\Windows Kits\10\bin\10.0.19041.0\x86 to find the 32bit version of oleview.exe
ONLY THE FIRST TIME: run it as administrator to avoid see the message related to the impossibility to load iviewer.dll
In the left pane, Object Classes -> All Objects and find your dll name.
WARNING: you may find many entries for your dll. In particular each class has got its own entry such as YourProjectName.YourClassName
In the right pane, go to Implementation -> Inproc Server, and tick Use Surrogate Process. Leave the Path to Custom Surrogate empty to use the system default surrogate, that is dllhost.exe.
You can check the procedure went correctly by returning to the Registry tab, always in the right pane of the Oleviewer and make sure that now under CLSID = {yourAppIdHere} [DllSurrogate] = is listed among the entries.
Edit manually the Windows Registry
The Oleview method is recommended, but the manual method may be ok if you need to do this only once. The tutorial that NickGlowsinDark mentions was moved to https://techtalk.gfi.com/32bit-object-64bit-environment/ .
In order to avoid problems in the future with the page going offline I copy and paste here the most important steps involved. All credit goes to Emmanuel Carabott that is the original author of the tutorial, I added the first two steps in order to facilitate you in the process.
Open the Registry Editor (Windows+R -> regedit), and follow the following steps:
You first need to find your dll GUIDs. You will probably have many GUIDs, one for each of the classes that your dll exports. I find it's easier to find the GUIDs if you go to HKEY_CLASSES_ROOT\YourProjectName.YouClassName. It is the (Default) String Value you find under the Clsid key.
I recommend you find all the GUIDs first and make a note of them in order to have an easier time with the steps after this one.
Then, as Emmanuel Carabott kindly explains in his article, you have to do the following for each of the GUIDs you found:
Locate your COM object GUID under the HKey_Classes_Root\Wow6432Node\CLSID\[GUID]
Once located add a new REG_SZ (string) Value. Name should be AppID and data should be the same COM object GUID you have just searched for.
Add a new key under HKey_Classes_Root\Wow6432Node\AppID\
The new key should be called the same as the com object GUID
Under the new key you just added, add a new REG_SZ (string) Value, and call it DllSurrogate. Leave the value empty.
Create a new Key under HKey_Local_Machine\Software\Classes\AppID\
Again the new key should be called the same as the COM object’s GUID. No values are necessary to be added under this key.
That’s it, your COM Object should now be accessible from a 64bit environment and can be used like a regular COM Object.
Related
This is my first attempt to use the registry in any depth, so bear with me...
I write small VB.net programs that interact with Excel and other programs to produce complex reports. As part of this we sometimes have to interact with a 3rd party DLL. Since this DLL is generally very rare, we took an "always install" policy, and run their installer on first-start.
Well now we have a customer who already has the 3rd party app, so the install fails (as it should). But this leaves me trying to find where the DLL/app has been installed so I can call it properly. Poking about in regedit (causing it to repeatedly crash) I have found it seems to be like this...
Installing the DLL produces an entry called APLW.WSEngine in HKEY_CLASSES_ROOT, as well as an apparently identical copy in HKEY_LOCAL_MACHINE\SOFTWARE\Classes\. Those entries both contain a CLSID which can be found in HKEY_CLASSES_ROOT\Interface\[the key]\TypeLib as well as entries for a variety of sub-parts of the install. I also find it at HKEY_CLASSES_ROOT\TypeLib\[the key], and here it has a key called \3.0\HELPDIR\ that contains the directory I'm looking for.
So...
What is the minimum number of calls I need to make to find the value in that HELPDIR key, or get Nothing or "" if any of the keys doesn't exist. In the end I either need that path, or nothing if the software has not been installed. Currently I'm making repeated calls into the reg to look up each entry and key in turn, but I suspect there is a way to chain them?
To make things slightly more complex, that \3.0\ in the path may change, the actual value is in the Version key in the original CLSID entry. If there is an easy way to add this I'll use it, but since we only work with 3.0 (AFAIK) it can be ignored.
Maybe 1. Maybe more. Don't know, this was not a very typically laid out question (which is probably why you got down voted), but I'm going to assume that you are more of a numbers / reporting person than a software engineer. So proceeding with that assumption, I will try and be helpful instead of pointing out any breaches of etiquette and provide you a couple resources that may help.
For starters, how to read a registry value:
https://msdn.microsoft.com/en-us/library/xz88758e.aspx
Secondly, the full tech spec on the Registry class in vb.net:
https://msdn.microsoft.com/en-us/library/microsoft.win32.registry(v=vs.110).aspx
Both give plenty of samples that should aid you along your way. But keep in mind that in certain situations and certain computer setups, these sorts of registry calls might require you to elevate your UAC permissions, if you run into such a case, you can try this resource, which covers in some detail how to make your applications UAC aware:
http://www.codeproject.com/Articles/17968/Making-Your-Application-UAC-Aware
I hope this helps, and good luck!
My firm's Access database has been having some serious problems recently. The errors we're getting seem like they indicate corruption -- here are the most common:
Error accessing file. Network connection may have been lost.
There was an error compiling this function.
No error, Access just crashes completely.
I've noticed that these errors only happen with a compiled database. If I decompile it, it works fine. If I take an uncompiled database and compile it, it works fine -- until the next time I try to open it. It appears that compiling the database into a .ACCDE file solves the problem, which is what I've been doing, but one person has reported that the issue returned for her, which has me very nervous.
I've tried exporting all of the objects in the database to text, starting with a brand new database, and importing them all again, but that doesn't solve the problem. Once I import all of the objects into the clean database, the problem comes back.
One last point that seems be related, but I don't understand how. The problem started right around the time that I added some class modules to the database. These class modules use the VBA Implements keyword, in an effort to clean up my code by introducing some polymorphism. I don't know why this would cause the problem, but the timing seems to indicate a relationship.
I've been searching for an explanation, but haven't found one yet. Does anyone have any suggestions?
EDIT: The database includes a few references in addition to the standard ones:
Microsoft ActiveX Data Objects 2.8
Microsoft Office 12.0
Microsoft Scripting Runtime
Microsoft VBScript Regular Expressions 5.5
Some of the things I do and use when debugging Access:
Test my app in a number of VM. You can use HyperV on Win8, VMWare or VirtualBox to set up various controlled test environments, like testing on WinXP, Win7, Win8, 32bit or 64 bits, just anything that matches the range of OS and bitness of your users.
I use vbWatchDog, a clever utility that only adds a few classes to your application (no external dependency) and allows you to trap errors at high level, and show you exactly where they happen. This is invaluable to catch and record strange errors, especially in the field.
If the issue appears isolated to one or a few users only, I would try to find out what is special about their config. If nothing seems out of place, I would completely unsintall all Office component and re-install it after scrubbing the registry for dangling keys and removing all traces of folders from the old install.
If your users do not need a complete version of Access, just use the free Access Runtime on their machine.
Make sure that you are using consistent versions of Access throughout: if you are using Access 2007, make sure your dev machine is also using that version and that all other users are also only using that version and that no components from Access 2010/2013 are present.
Try to ascertain if the crash is always happening around the same user-actions. I use a simple log file that I write to when a debugging flag is set. The log file is a simple text file that I open/write to/close everytime I log something (I don't keep it open to make sure the data is flushed to the file, otherwise when Access crashes, you may only have old data in the log file as the new one may still be in the buffer). Things I log are, for instance, sensitive function entry/exit, SQL queries that I execute from code, form open/close, etc.
As a generality, make sure your app compiles without issue (I mean when doing Debug > Compile from the IDE). Any issue at this stage must be solved.
Make absolutely sure you close all open recordsets, preferrably followed by setting their variables to Nothing. VBA is not as sensitive as it used to be about dangling references, but I found it good practice, especially when you cannot be absolutely sure that these references will be freed (especially when doing stuff at Module-level or Class-level for instance, where the scope may be longer-lived than expected).
Similarly, make sure you properly destroy any COM object you create in your classes (and subs/functions. The Class_Terminate destructor must explicitly clean up all. This is also valid when closing forms if you created COM objects (you mentioned using ADOX, scripting objects and regex). In general keeping track of created objects is paramount: make sure you explicitly free all your objects by resetting them (for instance using RemoveAll on a dictionary, then assigning their reference to Nothing.
Do not over-use On Error Resume or On Error Goto. I almost never use these except when absolutely necessary to recover from otherwise undetectable errors. Using these error trapping constructs can hide a lot of errors that would otherwise show you that something is wrong with your code. I prefer to program defensively than having to handle exceptions.
For testing, disable your error trapping to see if it isn't hiding the cause of your crashes.
Make sure that the front-end is local to the user machine, You mention they get their individual front-end from the network but I'm not sure if they run it from there or if it it copied on their local machine. At any rate, it should be local not on a remote folder.
You mention using SQL Server as a backend. Try to trace all the queries being executed. It's possible that the issue comes from communication with SQL Server, a corrupt driver, a security issue that prevents some queries from being run, a query returning unexpected data, etc. Watch the log files and event log on the server closely for strange errors, especially if they involve security.
Speaking of event log, look for the trace of the crash in the event log of your users. There may be information there, however cryptic.
If you use custom ribbon actions, make sure thy are not causing issues. I had strange problems over time with the ribbon. Log all all function calls made by the ribbon.
We have an .ocx file containing 2 ActiveX controls. One thing led to another and... now we're in "dll hell." One control loads fine within the containing application, and the other control (the one that was modified) fails to load completely. Without a doubt its because we broke compatibility by changing several event and method signatures. (That ought to teach us to unregister old .ocx's before registering new ones...)
In the past I recall having to go into the registry and manually remove important looking entries from HKCR\TypeLib, but that's scary stuff. What is the generally accepted solution to this?
If your COM registration is genuinely broken, the only way I know of to fix it is to do a search through the registry for the CLSIDs in question and delete all references to it.
Yeah, it's a little dangerous; that's why an activex control is supposed to safely register itself, and why MS now recommends using an MSI for installs and not doing a selfreg (regsvr32) in the install process. Once something gets messed up on a system, it can be a pain to fix it.
However, if you figure out the relevant CLSIDs (the CLSID for each control and the typelib) and remove only things that reference those you should be okay; to be safe, set a system restore point before you start.
Good luck
I have a windows form application in which I'm attempting to utilize a plugin (class library). In the code I have it load the assembly from a dll file, which means I have not been able to debug. Furthermore I have not found out how to compile the library so I've had to use the debuged dll version for testing. I've run into a bug in which I create a new object and send that data through an interface to the plugin in an attempt to retrieve a blank slate group box from the plugin. However instead of reading the parameter as a new object i managed to step through the code once (don't ask me how, I don't know and I haven't been able to repeat it) and it appeared that the code was registering the parameter as "nothing" thus why I received a null reference error in the main program.
Is there a better way to debug this mechanism and find out where the problem is? Any ideas on what the problem could be. As I read over this is seems somewhat vague and I'm not sure how to describe it, but I'm willing to host a connect now meeting if anyone is willing to look at what is going on and I'm not making myself understood very well.
I'm not sure if I follow exactly what you're doing but I usually find that the best way to debug a class library is by in the solution for the class library I add a new project, either a WinForms one or a Console one, I then set this new project as the start up project and add a reference to the Class Library project (via the Project tab in the Add Reference dialog).
You'll then be able to call the methods in the class library from the other project and you can put breakpoints anywhere to see what's really going on easily.
Ok, so the problem was that any time you edit the class library you have to compile (and the only way I know how is debugging, I can't find a compile button and the publish button doesn't work and building doesn't appear to make a dll). But anyways you have to compile, transfer the file so you are reading the most recent one. If you edit the code during runtime it does NOT update the dll in use...which was my problem.
I've got a really strange error and any light that anyone can shed on this would be greatly appreciated.
I made some changes to some VB6 source which builds a COM object. The automated build which builds our app returned an error. No problem I thought--I'll just back out my changes. Well backing out my changes isn't making the problem go away.
Specifically when I attempt to build the app via a .vbg file, with a command line like path\to\vb6\vb6 ProjectFile.vbg /make
I get a message
"Compile Error in File '', Line : Object library
invalid or contains references to object definitions that could not be
found."
As I said, I reverted the source code so I'm really stumped as to why this error is still occurring. Any VB6 gurus around who might be able to point me at an answer?
I can post the exact code in question but the fact that it was building correctly, stopped building correctly and now refuses to build correctly makes me think this is not a problem with my code but rather some problem in the environment. Like something got put in the registry as a result of the previous build error.
Any tips, hints, or suggestions greatly welcome. I realize my question is a bit sketchy but I'm not even sure what's important to include and what isn't.
EDIT 1:
Thanks for the excellent suggestions guys. I think it is something to do with VB6 doing some sort of auto-registration.
Just to add a bit more detail: this problem does not occur when I build the referenced vbp file from the IDE. It only happens on the make on the .vbg which contains the vbp. Also the build tool in question automatically pulls latest source and the error happens on both my local box and the dedicated build box.
EDIT 2:
Hi again all,
The release engineering fellow figured out how to get this to build in his build environment so it's currently ok. Once we're past this crunch, I'll try to interrogate him about what he did and share the details with everyone.
Thanks again for all the great suggestions. This is what's so great about SO; that is, I asked about a 10-year-old technology and I got several great and on-point ideas.
Make sure that the VBG and all the VBP's got rolled back as well. That error is consistent with a project trying to reference a CLSID that is no longer valid for the dependency. Have you tried loading up the project group and building from the IDE, if that works and you save and check in all the changes to the group and project files, you might be fixed up.
I'm guessing the fact that you mention that it was a COM component might be the source of the problem. If any of the public method's or properties have changed then I seem to remember that VB6 will change the interface GUIDs and auto register the new ones.
My suggestion would be to check the registry to look for any mention of the component name, make a note of any associated CLSIDs, back up the registry, and then delete the references.
As cmsjr mentions it could also be a bad CLSID reference in your .vbp files.
The other option is that the failure has caused a problem with some .tlb (type library) or olb (object library) files.
The best thing to do is move all your compatibility DLL to a separate and combined directory. The reason for this is control over what VB6 is using to check for binary compatibility. In addition the Typelibs that are generated IMPORT the references. So if you using Binary DLL Ver 10 for compatibility however the import is pulling in Binary DLL Ver 9 you will have issues. By keeping all the libraries in a single folder and pointing your projects to the DLLs in that folder you ensure that the respective TypeLib Import the correct version.
Finally if you have multiple levels of DLL reference each other. You may run into mysterious error where the VB6 is unable to compile using binary compatibility. In such cases you need to compile the lowest DLL in the hierarchy (Utility DLL perhaps) copy it over into the compatibility folders. Work your way up the chain until everything compiles in one shot again.
This is because if have DLL A reference DLL B which Reference DLL C. VB6 will get sometimes get confused if you make a change to A and C. will compile fine but A will not until the compatibility libraries are updated.
Hunt down and delete any .obj and .exp files that may be lying around from the previous failed build.
You will have to open the project & re-type in the lines that you changed.
Save the project alongwith VBG and re-compile after that.
I think that will fix it.
EDIT: The idea is that the cls/bas file remember the class (CLSID) that you used. So, if you change the references but don't change the lines in the cls/bas - it is a mismatch of type (what was referenced vs what is typed in cls/bas file).