I am currently working on a project of replacing our old access database queries, but on one of them I am not able to view the actual SQL View.
Does anyone know a way to force the view or to export it somehow?
Error causing problem:
The SQL statement could not be executed because it contains ambiguous outer joins.
Note that I can view the Design View without issue but when I right click on the tab and select SQL View is when I get the error.
I did attempt what #LeeMac mentioned below but same error occurs:
EDIT:
This question is not like Ambiguous Outer Joins?
The OP on that question can actually see and edit their SQL.
My issues is that I cannot see or edit the SQL as the SQL View wont open.
Try executing the following VBA code from the Immediate Window (accessible using Ctrl+G) in the VBA IDE (open the IDE using Alt+F11):
?CurrentDb.QueryDefs("YourQuery").SQL
Replace YourQuery with the name of your query.
This should print the SQL code which comprises your query - you can then analyse the SQL to determine the cause of the error.
It's odd this error would arise when merely viewing the SQL content of the query definition.
It makes me think that the query is perhaps referencing a crosstab subquery which is actually the cause of the error, but which needs to be evaluated in order for MS Access to determine the columns available when viewing the design of the query in question.
Try this:
hit ctrl-g, and from immediate window type in this:
saveastext acQuery,"Name of query","c:\test\mysql.txt"
Access ordinarily doesn't allow you to save invalid queries, so it's strange you somehow got into this situation in the first place.
If you can copy the query, you can easily get to the SQL by changing the query to a passthrough query, either through the GUI or through VBA:
Dim q As DAO.QueryDef
Set q = CurrentDb.QueryDefs!Query1
q.Connect = "ODBC;"
Debug.Print q.SQL
Passthrough queries are not validated, so you can freely read and write anything you want as SQL in it.
Note that this is irreversible when done through VBA. You can only change it back to a normal query once you made the SQL valid again. If you do it through the GUI, you can just not save it, though.
I had this problem and the issue was that i had a subquery that calculated fields but did not actually have a table in it. for example it would calculate first and last day of last month which is 2 calculated fields, then it was the first query in a series of queries that were built off it and the last one wouldnt resolve sql as original poster indicated also gave the ambiguous join message as well as query needs input table (which was that first subquery). i put a table with 1 record in it but didnt use the record and it worked.... so it just a needs a table in it.
I am trying to save a view using BigQuery's WebUI, which was created in Standard SQL Dialect, but I am getting this error:
Failed to save view. Bad table reference "myDataset.myTable"; table references in standard SQL views require explicit project IDs
Why is this error showing up? How can I fix it? Should the "Table ID" field of the "Save view" dialog include the project id? Or does this error appear because of the query itself? Just in case, the query is running without any problems.
Thanks for your help.
Your view has reference to myDataset.myTable - which is ok when you just run it as a query (for example in Web UI).
But to save it as a view you must fully qualify that reference as below
myProject.myDataset.myTable
So, just add project to that reference
Same reply, in other words
The issue is in this part of query: FROM com.table
When running query, it's fine to not fully specify the name of table like this:
com_company_app_beta_IOS.app_events_20180619
But to save the query as a view the FROM has to be like this:
`company-prod`.com_company_app_beta_IOS.app_events_20180619
You need the backticks around the `company-prod` because the - dash character is unsupported in object names.
The structure in BigQuery look like this:
bigquery ui
I had the same problem.
You'll need to use backticks around the the whole string project.dataset.view/table in both create and select statements:
create view company-prod.com_company_app_beta_IOS.YOUR_VIEW as
select * from company-prod.com_company_app_beta_IOS.app_events_20180619
Use backticks around string project.dataset.view
Whilst looking to upgrade a Microsoft SQL Server from 2014 to 2016, I ran Microsoft's Data Migration Assistant, and a breaking change was found with the WITH CHECK OPTION when using a view in a table.
Whilst looking through Microsoft's various pages for help, it seemed that they were dead-ends. Our current compatibility version is 120, and one option to fix was downgrading it to 90; however this isn't possible.
The code breaking is:
CREATE VIEW [table]
AS
SELECT TOP 1000000
[Id],
[UserName],
[Firstname]
FROM
[Users] WITH (NOLOCK)
WITH CHECK OPTION
GO
Does anyone have a fix for this? Otherwise it seems upgrading to 2016 version will not work.
So, if you follow the MSDN official documentation Create View (Transact-SQL) you will note the following in the UPDATABLE VIEWS section:
You can modify the data of an underlying base table through a view, as long as the following conditions are true:
...
TOP is not used anywhere in the select_statement of the view together with the WITH CHECK OPTION clause.
So it is highly possible that the SQL Server team have enforced this impossibility as the CHECK
Forces data modification statements executed against the view to follow the criteria set within select_statement.
Obviously, you will not be able to normally edit the code with the combined, so perhaps the answer is clear.
On some Microsoft Access queries, I get the following message: Operation must use an updatable query. (Error 3073). I work around it by using temporary tables, but I'm wondering if there's a better way. All the tables involved have a primary key. Here's the code:
UPDATE CLOG SET CLOG.NEXTDUE = (
SELECT H1.paidthru
FROM CTRHIST as H1
WHERE H1.ACCT = clog.ACCT AND
H1.SEQNO = (
SELECT MAX(SEQNO)
FROM CTRHIST
WHERE CTRHIST.ACCT = Clog.ACCT AND
CTRHIST.AMTPAID > 0 AND
CTRHIST.DATEPAID < CLOG.UPDATED_ON
)
)
WHERE CLOG.NEXTDUE IS NULL;
Since Jet 4, all queries that have a join to a SQL statement that summarizes data will be non-updatable. You aren't using a JOIN, but the WHERE clause is exactly equivalent to a join, and thus, the Jet query optimizer treats it the same way it treats a join.
I'm afraid you're out of luck without a temp table, though maybe somebody with greater Jet SQL knowledge than I can come up with a workaround.
BTW, it might have been updatable in Jet 3.5 (Access 97), as a whole lot of queries were updatable then that became non-updatable when upgraded to Jet 4.
--
I had a similar problem where the following queries wouldn't work;
update tbl_Lot_Valuation_Details as LVD
set LVD.LGAName = (select LGA.LGA_NAME from tbl_Prop_LGA as LGA where LGA.LGA_CODE = LVD.LGCode)
where LVD.LGAName is null;
update tbl_LOT_VALUATION_DETAILS inner join tbl_prop_LGA on tbl_LOT_VALUATION_DETAILS.LGCode = tbl_prop_LGA.LGA_CODE
set tbl_LOT_VALUATION_DETAILS.LGAName = [tbl_Prop_LGA].[LGA_NAME]
where tbl_LOT_VALUATION_DETAILS.LGAName is null;
However using DLookup resolved the problem;
update tbl_Lot_Valuation_Details as LVD
set LVD.LGAName = dlookup("LGA_NAME", "tbl_Prop_LGA", "LGA_CODE="+LVD.LGCode)
where LVD.LGAName is null;
This solution was originally proposed at https://stackoverflow.com/questions/537161/sql-update-woes-in-ms-access-operation-must-use-an-updateable-query
The problem defintely relates to the use of (in this case) the max() function. Any aggregation function used during a join (e.g. to retrieve the max or min or avg value from a joined table) will cause the error. And the same applies to using subqueries instead of joins (as in the original code).
This is incredibly annoying (and unjustified!) as it is a reasonably common thing to want to do. I've also had to use temp tables to get around it (pull the aggregated value into a temp table with an insert statement, then join to this table with your update, then drop the temp table).
Glenn
There is no error in the code. But the error is Thrown because of the following reason.
- Please check weather you have given Read-write permission to MS-Access database file.
- The Database file where it is stored (say in Folder1) is read-only..?
suppose you are stored the database (MS-Access file) in read only folder, while running your application the connection is not force-fully opened. Hence change the file permission / its containing folder permission like in C:\Program files all most all c drive files been set read-only so changing this permission solves this Problem.
I know my answer is 7 years late, but here's my suggestion anyway:
When Access complains about an UPDATE query that includes a JOIN, just save the query, with RecordsetType property set to Dynaset (Inconsistent Updates).
This will sometimes allow the UPDATE to work.
Thirteen years later I face the same issue. DISTINCTROW did not solve my problem, but dlookup did.
I need to update a table from an aggregate query. As far as I understand, MS Access always assumes that de junction between the to-update table and the aggregate query is one-to-many., even though unique records are assured in the query.
The use of dlookup is:
DLOOKUP(Field, SetOfRecords, Criteria)
Field: a string that identifies the field from which the data is retrieved.
SetOfRecords: a string that identifies the set o record from which the field is retrieved, being a table name or a (saved) query name (that doesn’t require parameters).
Criteria: A string used to restrict the range of data on which the DLookup function is performed, equivalent to the WHERE clause in an SQL expression, without the word WHERE.
Remark
If more than one field meets criteria, the DLookup function returns the first occurrence. You should specify criteria that will ensure that the field value returned by the DLookup function is unique.
The query that worked for me is:
UPDATE tblTarifaDeCorretagem
SET tblTarifaDeCorretagem.ValorCorretagem =
[tblTarifaDeCorretagem].[TarifaParteFixa]+
DLookUp(
"[ParteVariável]",
"cstParteVariavelPorOrdem",
"[IdTarifaDeCorretagem] = " & [tblTarifaDeCorretagem].[IdTarifaDeCorretagem]
);
I would try building the UPDATE query in Access. I had an UPDATE query I wrote myself like
UPDATE TABLE1
SET Field1 =
(SELECT Table2.Field2
FROM Table2
WHERE Table2.UniqueIDColumn = Table1.UniqueIDColumn)
The query gave me that error you're seeing. This worked on my SQL Server though, but just like earlier answers noted, Access UPDATE syntax isn't standard syntax. However, when I rebuilt it using Access's query wizard (it used the JOIN syntax) it worked fine. Normally I'd just make the UPDATE query a passthrough to use the non-JET syntax, but one of the tables I was joining with was a local Access table.
This occurs when there is not a UNIQUE MS-ACCESS key for the table(s) being updated. (Regardless of the SQL schema).
When creating MS-Access Links to SQL tables, you are asked to specify the index (key) at link time. If this is done incorrectly, or not at all, the query against the linked table is not updatable
When linking SQL tables into Access MAKE SURE that when Access prompts you for the index (key) you use exactly what SQL uses to avoid problem(s), although specifying any unique key is all Access needs to update the table.
If you were not the person who originally linked the table, delete the linked table from MS-ACCESS (the link only gets deleted) and re-link it specifying the key properly and all will work correctly.
(A little late to the party...)
The three ways I've gotten around this problem in the past are:
Reference a text box on an open form
DSum
DLookup
I had the same issue.
My solution is to first create a table from the non updatable query and then do the update from table to table and it works.
Mine failed with a simple INSERT statement. Fixed by starting the application with 'Run as Administrator' access.
MS Access - joining tables in an update query... how to make it updatable
Open the query in design view
Click once on the link b/w tables/view
In the “properties” window, change the value for “unique records” to “yes”
Save the query as an update query and run it.
You can always write the code in VBA that updates similarly. I had this problem too, and my workaround was making a select query, with all the joins, that had all the data I was looking for to be able to update, making that a recordset and running the update query repeatedly as an update query of only the updating table, only searching the criteria you're looking for
Dim updatingItems As Recordset
Dim clientName As String
Dim tableID As String
Set updatingItems = CurrentDb.OpenRecordset("*insert SELECT SQL here*");", dbOpenDynaset)
Do Until updatingItems .EOF
clientName = updatingItems .Fields("strName")
tableID = updatingItems .Fields("ID")
DoCmd.RunSQL "UPDATE *ONLY TABLE TO UPDATE* SET *TABLE*.strClientName= '" & clientName & "' WHERE (((*TABLE*.ID)=" & tableID & "))"
updatingItems.MoveNext
Loop
I'm only doing this to about 60 records a day, doing it to a few thousand could take much longer, as the query is running from start to finish multiple times, instead of just selecting an overall group and making changes. You might need ' ' around the quotes for tableID, as it's a string, but I'm pretty sure this is what worked for me.
I kept getting the same error until I made the connecting field a unique index in both connecting tables. Only then did the query become updatable.
Philip Stilianos
In essence, while your SQL looks perfectly reasonable, Jet has never supported the SQL standard syntax for UPDATE. Instead, it uses its own proprietary syntax (different again from SQL Server's proprietary UPDATE syntax) which is very limited. Often, the only workarounds "Operation must use an updatable query" are very painful. Seriously consider switching to a more capable SQL product.
For some more details about your specific problems and some possible workarounds, see Update Query Based on Totals Query Fails.
I kept getting the same error, but all SQLs execute in Access very well.
and when I amended the permission of AccessFile.
the problem fixed!!
I give 'Network Service' account full control permission, this account if for IIS
When I got this error, it may have been because of my UPDATE syntax being wrong, but after I fixed the update query I got the same error again...so I went to the ODBC Data Source Administrator and found that my connection was read-only. After I made the connection read-write and re-connected it worked just fine.
Today in my MS-Access 2003 with an ODBC tabla pointing to a SQL Server 2000 with sa password gave me the same error.
I defined a Primary Key on the table in the SQL Server database, and the issue was gone.
There is another scenario here that would apply. A file that was checked out of Visual Source Safe, for anyone still using it, that was not given "Writeablity", either in the View option or Check Out, will also recieve this error message.
Solution is to re-acquire the file from Source Safe and apply the Writeability setting.
To further answer what DRUA referred to in his/her answer...
I develop my databases in Access 2007. My users are using access 2007 runtime. They have read permissions to a database_Front (front end) folder, and read/write permissions to the database_Back folder.
In rolling out a new database, the user did not follow the full instructions of copying the front end to their computer, and instead created a shortcut. Running the Front-end through the shortcut will create a condition where the query is not updateable because of the file write restrictions.
Copying the front end to their documents folder solves the problem.
Yes, it complicates things when the users have to get an updated version of the front-end, but at least the query works without having to resort to temp tables and such.
check your DB (Database permission) and give full permission
Go to DB folder-> right click properties->security->edit-> give full control
& Start menu ->run->type "uac" make it down (if it high)
The answer given above by iDevlop worked for me. Note that I wasn't able to find the RecordsetType property in my update query. However, I was able to find that property by changing my query to a select query, setting that property as iDevlop noted and then changing my query to an update query. This worked, no need for a temp table.
I'd have liked for this to just be a comment to what iDevlop posted so that it flowed from his solution, but I don't have a high enough score.
I solved this by adding "DISTINCTROW"
so here this would be
UPDATE DISTINCTROW CLOG SET CLOG.NEXTDUE