I am writing a program that retrieves data from an industrial device and exports it to a MySQL database. For interacting with the device, I am using a DLL driver provided by the manufacturer. In this DLL, there is a custom-made exception which is thrown when there is a communication error or any other type of abnormal situation when communicating with the device.
The problem is that there is a single class exception. So, when I catch an exception of that type, I cannot really tell which particular problem happened since there are several ones (connection timeout, trying to access an invalid memory address, etc.).
So what I am doing for the moment is to use the Exception.Message property. So for example if the exception message contains "Invalid Address" then I know that the error is due to trying to access an illegal address within the device, similarly if the exception message contains "connection timeout" I know that there was an exception timeout. But this approach looks really dangerous since the messages may change in future releases of the DLL.
What can I do to deal with this problem in a better way?
If you're lucky the "generic" Exception has an InnerException with the real exception type.
If all of the exceptions have the same type and the only difference are the messages, then your solution is the best. Just hope the manufacturer does not change anything and make sure to test every new version...
Related
My goal is to influence the error descriptions that appear in BizTalk Administration Console in the Error Information tab of suspended instance windows, after errors occur in my custom functoids. If possible, I would also like the ErrorReport.Description promoted property to display this error description on the failed message.
I've read everything I can find about custom functoid development, but I can't find much about error handling within them. In particular, whenever my functoids throw exceptions, I see the boilerplate "Exception has been thrown at the target of an invocation" message that occurs whenever exceptions occur through reflection, rather than the message on the exception itself.
I had hoped to find something within the BaseFunctoid class framework that would allow me to submit an error string, so as to traverse the reflection boundary. Is there some way to pass error information from within a custom functoid, such that the BizTalk Administration Console will display it?
If I emulate the approach taken by DatabaseLookupFunctoid and DatabaseErrorExtractFunctoid, is there some way I can fail the map with the extracted error, rather than mapping it to a field on the destination schema as is shown in its examples?
The simplest way to do this is using custom C#, writing something like this in your code:
System.Diagnostics.EventLog.WriteEntry("EVENT_LOG_SOURCE", "Error message...", System.Diagnostics.EventLogEntryType.Error);
As Johns-305 mentions, you need to make sure your event source is registered (e.g. System.Diagnostics.EventLog.CreateEventSource("EVENT_LOG_SOURCE", "Application") - but this should really be done as part of your installation steps with an EventLogInstaller or some kind of script to set up the environment). It's certainly true that error handling in BizTalk is just .NET error handling, but one thing to keep in mind is that maps are actually executing as XSLT, and the context in which their executing can have a major impact on how exceptions and errors will be handled, particularly unhandled exceptions.
Orchestrations
If you're executing a transform in an orchestration that has exception handling in it, the exception thrown will be handled and may even fall into additional logging you have in the orchestration - in other words, executing a throw from a C# functiod will work the way you'd think it would work elsewhere in C#. However, I try to avoid this since you never know if a map will at some point be used else where and because exception handling in XSLT doesn't always work the way you'd think (see below).
Send/Receive Ports
Unfortunately, if you're executing a map on a send or receive port and throw an exception within it, you will almost definitely get very unhelpful error message in the event log and a suspended instance in the group hub. There is no easy, straightforward way to simple "cancel" a transform - XSLT 1.0 doesn't have any specified way of doing that (see for example Throwing an exception from XSLT). That leaves you with outputting an error string to a particular node in the output (and/or to the EventLog), or writing lots of completely custom XSLT to try to validate input, or designing your schemas properly and using a validating component where necessary. For example, if you have a node that must match a particular regex, or should never be empty, or should never repeat more than X times, make sure you set those restrictions on the schema and then make sure you pass it through the XmlValidator or similar before attempting to map.
The simplest answer is, you just do.
Keep in mind, there is nothing special at all about error handling in BizTalk apps, it's just regular plain old .Net error handling.
So, what you do is catch the error in you code, write the details to the Windows Event Log (be sure to create a custom Event Source) and...that's it. That is all I do. I don't worry about what appear in BT Admin specifically.strong text
I am studying OOP, and I did not understood the concept of exception.
What are the correct uses of exceptions?
Why use exceptions when you already know a possible exception?
For example, I have seen a code sample where the programmer needed to access a file, and had an exception in case the file does not exist. Something like "catch(fileDoesNotExist e)".
Why not use an if to verify before take the action? And use exception only for not known issues, for logging or error messages.
The idea behind the concept of exception was to decouple the error handling code from the "normal" behaviour flow control. That lets to manage/handle the exception further up the call stack.
Historically, with structured language, error handling code (file opening error,...) was mixed within the "business" application code. It was also painful to improve the code in order to manage new error codes.
What are the correct uses of exceptions?
If it is not normal that your file doesn't exist or cannot be opened => it is considered as an exceptional situation => exception => exception handler
Why use exceptions when you already know a possible exception?
To decouple the business application code from the error handling. That eases source code readibility and maintenance.
Exception:
Exception is that interrupt(break) the normal flow of the program.It's thrown at runtime.
Exception Handling
Exception Handling is a mechanism to handle runtime errors such as ClassNotFound, IO, SQL, Remote etc
In java there are mainly two types of exception that checked and unchecked.Other than Error is there
Hierarchy of Exception classes in Java
Why use exceptions when you already know a possible exception?
basically exception handling use to mainly,we assuming in that our particular code will occur some(NullPointerException,ArrayIndexOutOfBoundsException etc..)exception.If we not Handle that,program will break.Actually that Exception it may or may not will happen.But so we need to handle normal flow of the program it occurred or not.Otherwise after that particular code section not executing.
What is the difference between throw new Error and using Meteor.Error()? Is it simply that throw new Error will not be shown to the client, only on the server (the client will get a 500 Internal server error); and Meteor.Error will be sent to the client.
Are there any more differences? E.g. Does one break out of Fibers, stops downstream code?
The main thing with Meteor.Error is like you mentioned
A full stack trace (may not be given by Error always)
Possibility to send the error down to the client, in a limited non revealing form.
Hide the error from the server in certain cases (if its thrown in a method or publish method, and from hooks such as Accounts.onLoginAttempt)
The objects inside are EJSON serialised so a variety of data can be sent down to the client
When a Meteor.Error is thrown, because of the EJSON serialisation you get a bit more information on the server side.
Meteor displays the errors better.
Often you can get [Object object] as the reason to be displayed from ordinary errors when they come from ordinary Errors, from Meteor.wrapAsync
Theres not much else that's different, Meteor.Error is a a subclass of Error with the above changes.
So they'll both stop downstream code. When it comes to Fibers, if the ordinary one is thrown out of a Fiber in any way its likely to stop your app (on the server side & not in a method, startup, Meteor.setInterval, publish, etc)
Its definition is also quite small: https://github.com/meteor/meteor/blob/devel/packages/meteor/errors.js
I'm having a discussion with a colleague about when to throw faults and when not to throw faults in a WCF service.
One opinion is, that we only throw faults when the service operation could not do its work due to some error; and something may be in an invalid state because of it. So, some examples:
ValidateMember(string name, string password, string country)
-> would throw a fault if the mandatory parameters are not passed, because the validation itself could not be executed;
-> would throw fault if some internal error occured, like database was down
-> would return a status contract in all other cases, that specifies the result of the validation (MemberValidated, WrongPassword, MemberNotKnown,...)
GetMember(int memberId)
-> would only throw fault if something is down, in all other cases it would return the member or null if not found
The other opinion is that we should also throw faults when GetMember does not find the member, or in the case of ValidateMember the password is wrong.
What do you think?
My take on this...
There are three causes of failure:
The service code threw an exception, e.g. database error, logic error in your code. This is your fault.
The client code failed to use your service properly according to your documentation, e.g. it didn't set a required flag value, it failed to pass in an ID. This is the client software developer's fault.
The end user typed in something silly on screen, e.g. missing date of birth, negative salary. This is the end user's fault.
It's up to you how you choose to map actual fault contracts to each cause of failure. For example, we do this:
For causes 1 and 2, all the client code needs to know is that the service failed. We define a very simple "fatal error" fault contract that contains only a unique error ID. The full details of the error are logged on the server.
For cause 3, the end user needs to know exactly what he/she did wrong. We define a "validation errors" fault contract containing a collection of friendly error messages for the client code to display on screen.
We borrow the Microsoft EntLib class for cause 3, and use exception shielding to handle causes 1 and 2 declaratively. It makes for very simple code.
To Clarify:
We handle the three causes like this inside the service:
An unexpected exception is thrown in the service code. We catch it at the top level (actually exception shielding catches it, but the principle is the same). Log full details, then throw a FaultException<ServiceFault> to the client containing only the error ID.
We validate the input data and deliberately throw an exception. It's normally an ArgumentException, but any appropriate type would do. Once it is thrown, it is dealt with in exactly the same way as (1) because we want to make it appear the same to the client.
We validate the input data and deliberately throw an exception. This time, it's a FaultException<ValidationFault>. We configure exception shielding to pass this one through un-wrapped, so it appears on the client as FaultException<ValidationFault> not FaultException<ServiceFault>.
End result:
No catch blocks at all inside the service (nice clean code).
Client only has to catch FaultException<ValidationFault> if it wants to display messages to the user. All other exception types including FaultException<ServiceFault> are dealt with by the client's global error handler as fatal errors, since a fatal error in the service generally means a fatal error in the client as well.
It it is a common, routine failure, then throwing a fault is a mistake. The software should be written to handle routine items, like entering the wrong password. Fault processing is for exceptional failure which are not considered part of the program's normal design.
For example, if your program was written with the idea that it always has access to a database, and the database is not accessible, that's an issue where the "fix" is well outside of the limits of your software. A fault should be thrown.
Fault processing uses different logical flows through the structure of the programming language, and by using it only when you've "left" the normal processing of the programming problem, you will make your solution leverage the feature of the programming language in a way that seems more natural.
I believe it is good practice to separate error handling and fault handling. Any error case should be dealt by your program - fault handling is reserved for exceptional conditions. As a guide to the separation of the two I found it useful when considering such cases to remember that there are only three types of error (when handling data and messages) and only one type of fault.
The error types are related to different types of validation:
Message validation - you can determine from the message contents that the data is valid or invalid.
Example: content that is intended to be a date of birth - you can tell from the data whether it is valid or not.
Context validation - you can only determine that content is invalid by reference to the message
combined with the system state.
Example: a valid date of joining a company is earlier than that persons date of birth.
Lies to the system - you can only determine that a message was in error when a later message
throws up an anomaly.
Example: Valid date of birth stored and inspection of the person's birth certificate shows this to be incorrect. Correction of lies to the system generally require action outside of the system, for instance invoking legal or disciplinary remedies.
Your system MUST deal with all classes of error - though in case three this may be limited to issuing an alert.
Faults (exceptions) by contrast only have one cause - data corruption (which includes data truncation). Example: validation parameters are not passed.
Here the appropriate mechanism is fault or exception handling - basically handing off the problem to some other part of the system that is capable of dealing with it (which is why there should be an ultimate destination for unhandled faults).
In the old days we used to have a rule that exceptions were only for exceptional and unexpected things. One of the reasons you did not want to use them too much was that they "cost" alot of computing power.
But if you use exceptions you can reduce the amount of code, no need for alot of if else statements, just let the exception bubble up.
It depends on your project. The most important thing is that there is a project standard and everyone does it the same way.
My opinion is that exceptions/fault should be thrown whenever what the method is supposed to do can't be achieved. So validation logic should never raise exception except if the validation can't be made (i.e. for technical reasons) but never just because the data are not valid (in that case it will return validation codes/messages or anything helping the caller to correct the data).
Now the GetMember case is an interesting one because it's all about semantic. The name of the method suggest that a member can be retrieved by passing an id (compare to a TryGetMember method for exemple). Of course the method should not throw the same exception if the id is nowhere to be found or if the database does not respond but a wrong id passed to this method is probably the sign that something is going wrong somewhere before that call. Except if the user can directly enter a member-id from within the interface in which case a validation should occurred before calling the method.
I hear a lot about the performance issue. I just made a simple test using C# and trow/catch 1000 exceptions. The time it took is 23ms for 1K Exeptions. That's 23ยต per exception. I think performance is no longer the first argument here except if you plan to raise more than 2000 exception per second in which case you will have a 5% performance down, which I can start considering.
My humble opinion...
This is not so much a problem as advice on best practice really. I am writing an ASP.Net MVC application, and in my DAL i am using NHibernate, but what do you do if an exception is thrown in your DAL?
Do you catch the exception in the DAL, log the error and then re-throw the exception?
Do you not even attempt to catch exeptions at all and use the Application_Error() method in the global.asax as a generic catch all?
Do you catch the exception log it and return a bool to the controller indicating a success or failure, or do you do something completly different?
Leading on from this how then do you handle informing the users? Do you show a generic "Error Occured - please try again" type page or do you show a more informative error?
This is exactly one of those 'it depends' questions. This is what I do:
Handle all exceptions in Application_Error (or similar sink-like location)
If the exception is base for business logic - say cannot have duplicates, just catch it and act upon it.
If it is an infrastructure exception and there is a good chance you can fix it by retrying - handle it in DAL.
Propagating specific exception info to user has hardly any benefit because usually the user cannot do anything about it anyway. So a generic error message usually makes do.
All unexpected and selected expected exceptions need to be logged with as much info as possible. It is also advisable that you get email with the exception info.
Now specifically to NHibernate - if NH throws an exception it is advised that you close and discard the currently active ISession and just fail. Because the session might be in an unknown/inconsistent state and trying to resurrect it can do more harm than good.
Obviously depending on scale and type of your app and number of various systems/programmers/etc. involved you really might to handle the logging yourself.