I wanted to install pip onto beagle bone black,and I tried this:
/usr/bin/ntpdate -b -s -u pool.ntp.org
opkg update && opkg install python-pip python-setuptools
then, it threw errors,but Unfortunately, I didn't log that errors.
this is the error:
Collected errors:
* parse_from_stream_nomalloc: Excessively long line at 6. Corrupt file?
it was occurred a week ago and was't solved yet.
I wanted to solve it now and I tried connect by ssh,but I failed.
When I ping to beagle bone, it responds, and Cloud9 IDE is working too but not ssh.
I don't think this is serious problem since I can connect to beagle bone by other methods: Cloud9 or so.
However, to use python on beagle bone, I need to connect by ssh.
Before trying to update and install python-pip, I could connect by ssh.
Do you have any ideas to solve this connection problem?
Reference:
Setting up IO Python Library on BeagleBone Black
View Full Version : [VU+ Duo] Error installing ipk on Vu+ Duo
note
I use default OS: Angstrom
I don't use SD card.
HOST PC is mac, OS.X 10.9
I checked this but this wasn't helpful
Cannot connect to beagle bone black
I could connect by GateOne SSH client, but still unable to connect from terminal.
(Question answered in the comments and in question edits. See Question with no answers, but issue solved in the comments (or extended in chat) )
The OP wrote:
I solved this problem by succeeding update opkg, so I will write the details:
First, remove beaglbone file
rm /var/lib/opkg/lists/beaglebone
and,remove lists folder
rmdir /var/lib/opkg/lists
then, set current time on beagle
/usr/bin/ntpdate -b -s -u pool.ntp.org
afterwards, update and upgrade opkg:
opkg update and opkg upgrade
now you can use opkg !
Related
i'm trying to use QEMU 5.x for research.
I got QEMU 5.2 source code from qemu.org and installed following instructions.
However, when i tried to run VM by this command:
qemu-system-x86_64 \
-monitor stdio \
--enable-kvm \
-m 4096 \
-cdrom ubuntu-20.04.iso \
-drive file=img.qcow,if=virtio \
-boot c
-rtc base=localtime \
-device virtio-keyboard-pci \
-vga virtio \
then the following texts are printed:
QEMU 5.2.0 monitor - type 'help' for more information
(qemu) VNC server running on 127.0.0.1:5900
then nothing shows up, while QEMU 4.x (used before) pops up a window showing guest ubuntu's GUI.
I'm using ubuntu 20.04. Hope anyone has breakthrough for this..
The message says that this QEMU is using the VNC protocol for graphics output. You can connect a VNC client to the 127.0.0.1:5900 port that it tells you about to see the graphics output.
If what you wanted was a native X11 window (GTK), then the problem is probably that you didn't have the necessary libraries installed to build the GTK support. QEMU's configure script's default behaviour is "build all the optional features that this host has the libraries installed for, and omit the features where the libraries aren't present". So if you don't have any of the GTK/SDL etc libraries when you build QEMU, the only thing you will get in the resulting QEMU binary is the lowest-common-denominator VNC support. If you want configure to report an error for a missing feature then you need to pass it the appropriate --enable-whatever option to force the feature to be enabled (in this case, --enable-gtk).
If you're running on Ubuntu and your apt sources.list file has deb-src lines in it, the easiest way to install all the dependencies that would get you the same feature list as the real Ubuntu QEMU package is to run "apt build-dep qemu". I recommend that you do that and then re-build QEMU, passing --enable-gtk to configure so you can confirm that the necessary dependencies were installed.
I installed git instead of openssl to use Remote-SSH in VSCode.However,after I completed the config document and tried to connect to the remote host.I failed. The error info is showed in the below pic.error info
error info:
[11:27:12.631] remote-ssh#0.48.0
[11:27:12.632] win32 x64
[11:27:12.656] SSH Resolver called for "ssh-remote+23321", attempt 1
[11:27:12.659] SSH Resolver called for host: 23321
[11:27:12.659] Setting up SSH remote "23321"
[11:27:12.790] Using commit id "26076a4de974ead31f97692a0d32f90d735645c0" and quality "stable" for server
[11:27:12.798] Testing ssh with ssh -V
[11:27:13.099] ssh exited with code: 0
[11:27:13.100] Got stderr from ssh: OpenSSH_8.1p1, OpenSSL 1.1.1d 10 Sep 2019
[11:27:13.128] Running script with connection command: ssh -T -D 49485 23321 bash
[11:27:13.132] Install and start server if needed
[11:27:13.151] Terminal shell path: C:\Windows\System32\cmd.exe
[11:27:30.151] Resolver error: Connecting with SSH timed out
[11:27:30.178] ------
I had the same problem but the above solutions didn't work with my setup,
but the following setting did work:
"remote.SSH.useLocalServer": false
I got this solution from github reported issues and fix
In my case, the problem was caused by a too long authentication process on the server-side.
Solved it by extending the Connect Timeout from 15 to 30 seconds.
Instructions:
open your vscode Command Palette (via keyboard shortcut or from the
View menu).
search for the Remote-SSH: Settings.
scroll till you find the Connect Timeout.
change it to a longer duration than 15 secs.
key F1
Remote-SSH: Settings
Connect Timeout: from 15 seconds to 60 seconds solve my connection issue
You can try the following approaches:
ssh to your remote server. Then run the following commands to clean data folder and bin folder under .vscode-server folder on the server:
cd ~/.vscode-server
rm data/* -rf
rm bin/* -rf
If step 1 does not work, ssh to your remote server and delete the entire .vscode-server folder with the following command:
rm -rf ~/.vscode-server
Please note that this will also remove the extensions that you installed on the server.
Downgrade the version of the remote-SSH extension in vscode. Look up the extension in the vscode interface, right click on that, and you will find the option "Install Another Version ...". Install the previous version of the current one. If it does not work keep downgrading the version.
I had the same problem before, I solved this by deleting "terminal.integrated.inheritEnv": false inside ~/.config/Code/User/setting.json
I found the solution here in this thread from user oreilm49:
https://github.com/microsoft/vscode-remote-release/issues/1137
in vscode settings :
search conpty and uncheck it
I had same issue, my problem was solved after changing settings in the json file:
I removed "terminal.integrated.inheritEnv": false inside ~/.config/Code/User/setting.json
I added "remote.SSH.useLocalServer": true inside ~/.config/Code/User/setting.json
It worked for me after so many different trials
This might be a very foolish solution but it actually works for me, so I will write it down in case any other people get into the same problem.
I made modifications to the config file for SSH, then all the trials for connection ran into the error of 'Connecting SSH timed out'. I tried many possible solutions but none of them solved my problem.
Then I just closed the VScode and restarted it. Then everything works.
I had a case of this. I my client (local computer) is a Mac, and I was connecting to Linux host. I just went to the setting "Remote Platform" under Remote.SSH settings, and explicitly told it that I am connecting to a Linux remote. After this, it started to work.
I had this issue because of version missmatch of client and server. After updating both to the same version, it worked for me.
The issue with me was timeout at first. I tried increasing the timeout in settings but then later found the issue was with "tar".
The vscode-server.tar.gz (probably a little change in the file name) was not able to install due to tar not being present in my host.
So I installed tar in the host as "yum install tar"
And then tried reconnecting to the server and it worked
I'm trying to run the "screen" utility on Windows Subsystem for Linux on Windows 10 (Version 1703, OS Build 15063.483).
It seems that I need additional permissions to run it (it works if I "sudo" it), but I don't understand why that is necessary.
What is the recommended way to set this up?
Is there some reason why this isn't the default set up?
$ screen
Cannot make directory '/var/run/screen': Permission denied
From an answer on SuperUser I discovered that you have to run
sudo /etc/init.d/screen-cleanup start
Then screen works fine for me.
EDIT: after installing Ubuntu 20.04 the problem went away (*).
As Krease pointed out, the best solution is the one described in this SuperUser post.
Add the following to your .bashrc:
export SCREENDIR=$HOME/.screen
[ -d $SCREENDIR ] || mkdir -p -m 700 $SCREENDIR
See also issue 1245 on github.
--
(*) now this warning comes up, but seems harmless:
sleep: cannot read realtime clock: Invalid argument
sudo screen # which creates dir /var/run/screen
chmod 777 /var/screen # so that non-root users can create their own screen dir in this dir.
Though I have followed the usual steps for using the dotCloud CLI under Cygwin, dotcloud push fails in all cases: --rsync, --hg, and --git.
I am on Windows 8 and Cygwin.
How can I push successfully?
Sample output:
me#host /cygdrive/d/project
$ dotcloud push --rsync
==> Pushing code with rsync from "./" to application myapp
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at /home/lapo/package/rsync-3.0.9-1/src/rsync-3.0.9/io.c(605) [sender=3.0.9]
me#host /cygdrive/d/project
$ dotcloud push --git
Permission denied (publickey,password).r from "./" to application myapp
fatal: The remote end hung up unexpectedly
me#host /cygdrive/d/project
$ dotcloud push --hg
==> Pushing code with mercurial from "./" to application myapp
abort: no suitable response from remote hg!
Error: Mercurial returned a fatal error
You may be running into a bug in Cygwin's group permissions. Vineet Gupta gives a workaround in his blog. The problem comes from the very strict permissions expected by ssh around the keys, and the solution is to set the permission on the ssh key properly (to 600, rw by owner only). Cygwin seems to need the group to be added manually.
Updating the steps to get the dotCloud CLI installed, including setting the permissions, leads to:
Start the Cygwin Setup.
Select default choices until you reach the package selection dialog.
Enable the following packages:
net/openssh
net/rsync
devel/git
devel/mercurial
python/python (make sure it’s at least 2.6!)
web/wget
After the installation, you should have a Cygwin icon on your desktop. Start it: you will get a command-line shell.
Download easy_install
wget http://peak.telecommunity.com/dist/ez_setup.py
Install easy_install
python ez_setup.py
You now have easy_install; let’s use it to install pip:
easy_install pip
Now install dotcloud (the CLI)
pip install dotcloud
Set up the CLI with your credentials. This will also download the ssh key.
dotcloud setup
New Step Update the permissions on your dotCloud key:
chgrp Users ~/.dotcloud_cli/dotcloud.key
chmod 600 ~/.dotcloud_cli/dotcloud.key
Now you should be able to dotcloud push
If you have multiple dotCloud accounts, then you will need to repeat this process for each account, since each account has its own key. Also note that you shouldn't have to set these permissions manually, but it seems like the group ownership is sometimes the wrong default in Cygwin. Linux and OSX don't seem to show this problem, though the permissions must be 600 for all OSes, so it is worth checking.
I'm trying to get started on libvirt with VirtualBox as a virtualization solution. I installed everything and VirtualBox itself is running when using their VBoxHeadless command.
However, libvirt fails to connect to VirtualBox:
# virsh -c vbox:///session
libvir: error : could not connect to vbox:///session
error: failed to connect to the hypervisor
I could not find any hints in the libvirt documentation that point to whether I have to make any domain specific configuration before using virsh.
Does anyone have a hint? Or even better, maybe a tutorial that works through the way of using libvirt, virsh or it's APIs (my later goal) from the ground up.
If you are doing this on Ubuntu, then the problem is their libvirt package is built without VirtualBox support.
You can rebuild the package with support very easily. Something like:
apt-get source -d libvirt
sudo apt-get build-dep libvirt
dpkg-source -x libvirt*dsc
Go into the libvirt directory and edit debian/rules so that instead of --without-vbox it says --with-vbox. You can add an entry to the top of debian/changelog so the package is compiled as a different version (e.g., append ~local1 to the version).
dpkg-buildpackage -us -uc -b -rfakeroot
You'll get new .debs built in the directory above. Use dpkg -i to install the relevant ones (libvirt0, libvirt0-bin, and whatever else you want).
Double-check whether or not you have write access to /var/run/libvirt/libvirt-sock.
The socket file should have permissions similar to:
$ sudo ls -la /var/run/libvirt/libvirt-sock
srwxrwx--- 1 root libvirtd 0 2010-08-24 14:54 /var/run/libvirt/libvirt-sock
I think it could be helpful also to increase the libvirt logging capabilities by running this in your shell:
export LIBVIRT_DEBUG=1
There is Ubuntu PPA for libvirt with VirtualBox support: https://launchpad.net/~cxl/+archive/ubuntu/libvirt