I want to bring back the county Id and the county name. How can I fix this query?
DECLARE #test int = 0;
select
CASE (#test)
when 0 then (SELECT co.Id, co.Description
FROM Dictionary.Counties as co
INNER JOIN CountyCollaboration as cc on cc.CountyId = co.Id
WHERE cc.CollaborationId = (SELECT cc1.CollaborationId from CountyCollaboration as cc1
WHERE cc1.CountyId = 34))
END
I get the error only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
If I comment out co.Description so I'm only bringing back co.Id, I get a different error: subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <=, >, >=, or when the subquery is used as as expression.
You can only return one expression from a CASE statement. Try using IF/ELSE instead.
The CASE statement in T-SQL is not a control flow statement like CASE/SWITCH in many programming languages.
I suggest restructuring your query to look like this.
select id, country
from
(select co.id
, co.country
, case #test code for test goes here end caseresult
from all that stuff you have as a subquery in your question
) derivedtable
Your subquery was returning multiple fields and possible multiple records. A subquery like this must always return one field and one record.
I'm guessing the INNER JOIN is causing multiple records to be returned. If all of the records have the same value you can to a DISTINCT or TOP 1.
Related
I run the following query:
SELECT
orderdetails.sku,
orderdetails.mf_item_number,
orderdetails.qty,
orderdetails.price,
supplier.supplierid,
supplier.suppliername,
supplier.dropshipfees,
cost = (SELECT supplier_item.price
FROM supplier_item,
orderdetails,
supplier
WHERE supplier_item.sku = orderdetails.sku
AND supplier_item.supplierid = supplier.supplierid)
FROM orderdetails,
supplier,
group_master
WHERE invoiceid = '339740'
AND orderdetails.mfr_id = supplier.supplierid
AND group_master.sku = orderdetails.sku
I get the following error:
Msg 512, Level 16, State 1, Line 2
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Any ideas?
Try this:
SELECT
od.Sku,
od.mf_item_number,
od.Qty,
od.Price,
s.SupplierId,
s.SupplierName,
s.DropShipFees,
si.Price as cost
FROM
OrderDetails od
INNER JOIN Supplier s on s.SupplierId = od.Mfr_ID
INNER JOIN Group_Master gm on gm.Sku = od.Sku
INNER JOIN Supplier_Item si on si.SKU = od.Sku and si.SupplierId = s.SupplierID
WHERE
od.invoiceid = '339740'
This will return multiple rows that are identical except for the cost column. Look at the different cost values that are returned and figure out what is causing the different values. Then ask somebody which cost value they want, and add the criteria to the query that will select that cost.
Check to see if there are any triggers on the table you are trying to execute queries against. They can sometimes throw this error as they are trying to run the update/select/insert trigger that is on the table.
You can modify your query to disable then enable the trigger if the trigger DOES NOT need to be executed for whatever query you are trying to run.
ALTER TABLE your_table DISABLE TRIGGER [the_trigger_name]
UPDATE your_table
SET Gender = 'Female'
WHERE (Gender = 'Male')
ALTER TABLE your_table ENABLE TRIGGER [the_trigger_name]
SELECT COLUMN
FROM TABLE
WHERE columns_name
IN ( SELECT COLUMN FROM TABLE WHERE columns_name = 'value');
note: when we are using sub-query we must focus on these points:
if our sub query returns 1 value in this case we need to use (=,!=,<>,<,>....)
else (more than one value), in this case we need to use (in, any, all, some )
cost = Select Supplier_Item.Price from Supplier_Item,orderdetails,Supplier
where Supplier_Item.SKU=OrderDetails.Sku and
Supplier_Item.SupplierId=Supplier.SupplierID
This subquery returns multiple values, SQL is complaining because it can't assign multiple values to cost in a single record.
Some ideas:
Fix the data such that the existing subquery returns only 1 record
Fix the subquery such that it only returns one record
Add a top 1 and order by to the subquery (nasty solution that DBAs hate - but it "works")
Use a user defined function to concatenate the results of the subquery into a single string
The fix is to stop using correlated subqueries and use joins instead. Correlated subqueries are essentially cursors as they cause the query to run row-by-row and should be avoided.
You may need a derived table in the join in order to get the value you want in the field if you want only one record to match, if you need both values then the ordinary join will do that but you will get multiple records for the same id in the results set. If you only want one, you need to decide which one and do that in the code, you could use a top 1 with an order by, you could use max(), you could use min(), etc, depending on what your real requirement for the data is.
I had the same problem , I used in instead of = , from the Northwind database example :
Query is : Find the Companies that placed orders in 1997
Try this :
SELECT CompanyName
FROM Customers
WHERE CustomerID IN (
SELECT CustomerID
FROM Orders
WHERE YEAR(OrderDate) = '1997'
);
Instead of that :
SELECT CompanyName
FROM Customers
WHERE CustomerID =
(
SELECT CustomerID
FROM Orders
WHERE YEAR(OrderDate) = '1997'
);
Either your data is bad, or it's not structured the way you think it is. Possibly both.
To prove/disprove this hypothesis, run this query:
SELECT * from
(
SELECT count(*) as c, Supplier_Item.SKU
FROM Supplier_Item
INNER JOIN orderdetails
ON Supplier_Item.sku = orderdetails.sku
INNER JOIN Supplier
ON Supplier_item.supplierID = Supplier.SupplierID
GROUP BY Supplier_Item.SKU
) x
WHERE c > 1
ORDER BY c DESC
If this returns just a few rows, then your data is bad. If it returns lots of rows, then your data is not structured the way you think it is. (If it returns zero rows, I'm wrong.)
I'm guessing that you have orders containing the same SKU multiple times (two separate line items, both ordering the same SKU).
The select statement in the cost part of your select is returning more than one value. You need to add more where clauses, or use an aggregation.
The error implies that this subquery is returning more than 1 row:
(Select Supplier_Item.Price from Supplier_Item,orderdetails,Supplier where Supplier_Item.SKU=OrderDetails.Sku and Supplier_Item.SupplierId=Supplier.SupplierID )
You probably don't want to include the orderdetails and supplier tables in the subquery, because you want to reference the values selected from those tables in the outer query. So I think you want the subquery to be simply:
(Select Supplier_Item.Price from Supplier_Item where Supplier_Item.SKU=OrderDetails.Sku and Supplier_Item.SupplierId=Supplier.SupplierID )
I suggest you read up on correlated vs. non-correlated subqueries.
As others have suggested, the best way to do this is to use a join instead of variable assignment. Re-writing your query to use a join (and using the explicit join syntax instead of the implicit join, which was also suggested--and is the best practice), you would get something like this:
select
OrderDetails.Sku,
OrderDetails.mf_item_number,
OrderDetails.Qty,
OrderDetails.Price,
Supplier.SupplierId,
Supplier.SupplierName,
Supplier.DropShipFees,
Supplier_Item.Price as cost
from
OrderDetails
join Supplier on OrderDetails.Mfr_ID = Supplier.SupplierId
join Group_Master on Group_Master.Sku = OrderDetails.Sku
join Supplier_Item on
Supplier_Item.SKU=OrderDetails.Sku and Supplier_Item.SupplierId=Supplier.SupplierID
where
invoiceid='339740'
Even after 9 years of the original post, this helped me.
If you are receiving these types of errors without any clue, there should be a trigger, function related to the table, and obviously it should end up with an SP, or function with selecting/filtering data NOT USING Primary Unique column. If you are searching/filtering using the Primary Unique column there won't be any multiple results. Especially when you are assigning value for a declared variable. The SP never gives you en error but only an runtime error.
"System.Data.SqlClient.SqlException (0x80131904): Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated."
In my case obviously there was no clue, but only this error message. There was a trigger connected to the table and the table updating by the trigger also had another trigger likewise it ended up with two triggers and in the end with an SP. The SP was having a select clause which was resulting in multiple rows.
SET #Variable1 =(
SELECT column_gonna_asign
FROM dbo.your_db
WHERE Non_primary_non_unique_key= #Variable2
If this returns multiple rows, you are in trouble.
I am trying to insert data from one table to another where the records match on a foreign key. I am using SSMS. Here is my code:
INSERT INTO competitor_info (p21_part_number)
SELECT inv_mast.item_id
FROM inv_mast
WHERE inv_mast.upc_code =
(SELECT item_info.UPC
FROM item_info)
I am getting the following error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
What would be the best way to go about this?
One method uses IN:
WHERE inv_mast.upc_code IN
(SELECT item_info.UPC
FROM item_info)
I prefer EXISTS:
WHERE EXISTS (SELECT 1 FROM item_info.UPC WHERE UPC.item_info = inv_mast.upc_code)
This often has better performance, particularly with the right indexes.
I need to add multirows at the same time in my sql server Table using this code
declare #idproduct int
declare #idfile int
set #idproduct = (select id from Products where name = 'DR-8416')
set #idfile = (select id from Files where filename like '%8416%')
insert into ProductsFiles(idproducts, idfile) values (#idproduct, #idfile)
that #idfile is an array with many values;
when I try to add I recied this error
Subquery returned more than 1 value. This is not permitted when the
subquery follows =, !=, <, <= , >, >= or when the subquery is used as
an expression.
How Can I solve this Problem ?
Best I can guess is what you are after is:
INSERT INTO ProductsFiles (idproducts,
idfile)
SELECT P.id,
F.id
FROM Products AS P
CROSS JOIN Files AS F
WHERE P.[name] = 'DR-8416'
AND F.[filename] LIKE '%8416%';
Note I have used as CROSS JOIN, as your question suggests there is no relationship between Products and Files. If there is change the CROSS JOIN to an INNER JOIN and add the relevant ON clause. If you don't know about JOIN syntax I suggest looking it up, and learning it. JOIN syntax is one of the fundamentals for SQL and you will not get far without learning it. You will learn far more by taking the time to read up about it than me giving you an answer and trying to explain the basics.
I run the following query:
SELECT
orderdetails.sku,
orderdetails.mf_item_number,
orderdetails.qty,
orderdetails.price,
supplier.supplierid,
supplier.suppliername,
supplier.dropshipfees,
cost = (SELECT supplier_item.price
FROM supplier_item,
orderdetails,
supplier
WHERE supplier_item.sku = orderdetails.sku
AND supplier_item.supplierid = supplier.supplierid)
FROM orderdetails,
supplier,
group_master
WHERE invoiceid = '339740'
AND orderdetails.mfr_id = supplier.supplierid
AND group_master.sku = orderdetails.sku
I get the following error:
Msg 512, Level 16, State 1, Line 2
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Any ideas?
Try this:
SELECT
od.Sku,
od.mf_item_number,
od.Qty,
od.Price,
s.SupplierId,
s.SupplierName,
s.DropShipFees,
si.Price as cost
FROM
OrderDetails od
INNER JOIN Supplier s on s.SupplierId = od.Mfr_ID
INNER JOIN Group_Master gm on gm.Sku = od.Sku
INNER JOIN Supplier_Item si on si.SKU = od.Sku and si.SupplierId = s.SupplierID
WHERE
od.invoiceid = '339740'
This will return multiple rows that are identical except for the cost column. Look at the different cost values that are returned and figure out what is causing the different values. Then ask somebody which cost value they want, and add the criteria to the query that will select that cost.
Check to see if there are any triggers on the table you are trying to execute queries against. They can sometimes throw this error as they are trying to run the update/select/insert trigger that is on the table.
You can modify your query to disable then enable the trigger if the trigger DOES NOT need to be executed for whatever query you are trying to run.
ALTER TABLE your_table DISABLE TRIGGER [the_trigger_name]
UPDATE your_table
SET Gender = 'Female'
WHERE (Gender = 'Male')
ALTER TABLE your_table ENABLE TRIGGER [the_trigger_name]
SELECT COLUMN
FROM TABLE
WHERE columns_name
IN ( SELECT COLUMN FROM TABLE WHERE columns_name = 'value');
note: when we are using sub-query we must focus on these points:
if our sub query returns 1 value in this case we need to use (=,!=,<>,<,>....)
else (more than one value), in this case we need to use (in, any, all, some )
cost = Select Supplier_Item.Price from Supplier_Item,orderdetails,Supplier
where Supplier_Item.SKU=OrderDetails.Sku and
Supplier_Item.SupplierId=Supplier.SupplierID
This subquery returns multiple values, SQL is complaining because it can't assign multiple values to cost in a single record.
Some ideas:
Fix the data such that the existing subquery returns only 1 record
Fix the subquery such that it only returns one record
Add a top 1 and order by to the subquery (nasty solution that DBAs hate - but it "works")
Use a user defined function to concatenate the results of the subquery into a single string
The fix is to stop using correlated subqueries and use joins instead. Correlated subqueries are essentially cursors as they cause the query to run row-by-row and should be avoided.
You may need a derived table in the join in order to get the value you want in the field if you want only one record to match, if you need both values then the ordinary join will do that but you will get multiple records for the same id in the results set. If you only want one, you need to decide which one and do that in the code, you could use a top 1 with an order by, you could use max(), you could use min(), etc, depending on what your real requirement for the data is.
I had the same problem , I used in instead of = , from the Northwind database example :
Query is : Find the Companies that placed orders in 1997
Try this :
SELECT CompanyName
FROM Customers
WHERE CustomerID IN (
SELECT CustomerID
FROM Orders
WHERE YEAR(OrderDate) = '1997'
);
Instead of that :
SELECT CompanyName
FROM Customers
WHERE CustomerID =
(
SELECT CustomerID
FROM Orders
WHERE YEAR(OrderDate) = '1997'
);
Either your data is bad, or it's not structured the way you think it is. Possibly both.
To prove/disprove this hypothesis, run this query:
SELECT * from
(
SELECT count(*) as c, Supplier_Item.SKU
FROM Supplier_Item
INNER JOIN orderdetails
ON Supplier_Item.sku = orderdetails.sku
INNER JOIN Supplier
ON Supplier_item.supplierID = Supplier.SupplierID
GROUP BY Supplier_Item.SKU
) x
WHERE c > 1
ORDER BY c DESC
If this returns just a few rows, then your data is bad. If it returns lots of rows, then your data is not structured the way you think it is. (If it returns zero rows, I'm wrong.)
I'm guessing that you have orders containing the same SKU multiple times (two separate line items, both ordering the same SKU).
The select statement in the cost part of your select is returning more than one value. You need to add more where clauses, or use an aggregation.
The error implies that this subquery is returning more than 1 row:
(Select Supplier_Item.Price from Supplier_Item,orderdetails,Supplier where Supplier_Item.SKU=OrderDetails.Sku and Supplier_Item.SupplierId=Supplier.SupplierID )
You probably don't want to include the orderdetails and supplier tables in the subquery, because you want to reference the values selected from those tables in the outer query. So I think you want the subquery to be simply:
(Select Supplier_Item.Price from Supplier_Item where Supplier_Item.SKU=OrderDetails.Sku and Supplier_Item.SupplierId=Supplier.SupplierID )
I suggest you read up on correlated vs. non-correlated subqueries.
As others have suggested, the best way to do this is to use a join instead of variable assignment. Re-writing your query to use a join (and using the explicit join syntax instead of the implicit join, which was also suggested--and is the best practice), you would get something like this:
select
OrderDetails.Sku,
OrderDetails.mf_item_number,
OrderDetails.Qty,
OrderDetails.Price,
Supplier.SupplierId,
Supplier.SupplierName,
Supplier.DropShipFees,
Supplier_Item.Price as cost
from
OrderDetails
join Supplier on OrderDetails.Mfr_ID = Supplier.SupplierId
join Group_Master on Group_Master.Sku = OrderDetails.Sku
join Supplier_Item on
Supplier_Item.SKU=OrderDetails.Sku and Supplier_Item.SupplierId=Supplier.SupplierID
where
invoiceid='339740'
Even after 9 years of the original post, this helped me.
If you are receiving these types of errors without any clue, there should be a trigger, function related to the table, and obviously it should end up with an SP, or function with selecting/filtering data NOT USING Primary Unique column. If you are searching/filtering using the Primary Unique column there won't be any multiple results. Especially when you are assigning value for a declared variable. The SP never gives you en error but only an runtime error.
"System.Data.SqlClient.SqlException (0x80131904): Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated."
In my case obviously there was no clue, but only this error message. There was a trigger connected to the table and the table updating by the trigger also had another trigger likewise it ended up with two triggers and in the end with an SP. The SP was having a select clause which was resulting in multiple rows.
SET #Variable1 =(
SELECT column_gonna_asign
FROM dbo.your_db
WHERE Non_primary_non_unique_key= #Variable2
If this returns multiple rows, you are in trouble.
I am trying to update column in table get it from another table and I have relation between two tables as parent have primary key "tbl_Inv_ClientItemsReturnOrders" and child have foreign key "tbl_Inv_ClientItemsReturnOrderDetails".
I try this
update U
set U.InventoryReturnReasonID =
(select InventoryReturnReasonID
from tbl_Inv_ClientItemsReturnOrders
where ClientItemsReturnOrderID = U.ClientItemsReturnOrderID)
from [dbo].[tbl_Inv_ClientItemsReturnOrderDetails] U
But I get this error
Subquery returned more than 1 value. This is not permitted when the
subquery follows =, !=, <, <= , >, >= or when the subquery is used as
an expression.The statement has been terminated.
I want to update column "InventoryReturnReasonID" in table "tbl_Inv_ClientItemsReturnOrderDetails" by value of column "InventoryReturnReasonID" from table "tbl_Inv_ClientItemsReturnOrders"
you can use the query given below for getting better idea about the issue.
SELECT * FROM [dbo].[tbl_Inv_ClientItemsReturnOrderDetails] U
INNER JOIN [dbo].[tbl_Inv_ClientItemsReturnOrders] P ON (P.ClientItemsReturnOrderID = U.ClientItemsReturnOrderID)
we have the option to compile update with join. The query is as follows
UPDATE U
SET U.InventoryReturnReasonID = P.InventoryReturnReasonID
FROM [dbo].[tbl_Inv_ClientItemsReturnOrderDetails] U
INNER JOIN [dbo].[tbl_Inv_ClientItemsReturnOrders] P ON (P.ClientItemsReturnOrderID = U.ClientItemsReturnOrderID)
The error is pretty clear. You can select an arbitrary value using TOP 1:
Update U
set U.InventoryReturnReasonID = (select TOP 1 ro.InventoryReturnReasonID
from tbl_Inv_ClientItemsReturnOrders ro
where ro.ClientItemsReturnOrderID = U.ClientItemsReturnOrderID
)
from [dbo].tbl_Inv_ClientItemsReturnOrderDetails U;
Normally, TOP should have an ORDRER BY. You can include an ORDER BY to specify which of multiple values the update should use.
Note: Using qualified column names (i.e. including a table alias) is always a good idea. It should be mandatory with a correlated subquery because of the potential danger if something goes wrong. For instance, your query would return too many rows if the column ro.ClientItemsReturnOrderID did not exist.
Another approach is to use aggregation:
Update U
set U.InventoryReturnReasonID = (select max(ro.InventoryReturnReasonID)
from tbl_Inv_ClientItemsReturnOrders ro
where ro.ClientItemsReturnOrderID = U.ClientItemsReturnOrderID
)
from [dbo].tbl_Inv_ClientItemsReturnOrderDetails U;