I am new in stored procedures.
ALTER PROCEDURE [dbo].[SP_MY_STORE_PROCEDURED]
(
#ID INT,
#NAME VARCHAR(50)
)
AS
BEGIN
UPDATE MY_TABLE
SET
WHEN
(( ID ) > 1)
THEN
ID=#ID
,
NAME = #NAME
END
I try to use when then for update my ID and Name
If Id is greater than 1 i want to update otherwise no update.
How can i do it ms sql?
Any help will be appreciated.
Thanks.
I think this is what you are after:
ALTER PROCEDURE [dbo].[SP_MY_STORE_PROCEDURED]
(
#ID INT,
#NAME VARCHAR(50)
)
AS
BEGIN
UPDATE MY_TABLE
SET NAME = #NAME
WHERE ID = #ID
END
You do not need to check ID>1 since you are checking the equality with #ID. If you want to be sure that this doesn't happen if #ID <=1 then you may try the following:
ALTER PROCEDURE [dbo].[SP_MY_STORE_PROCEDURED]
(
#ID INT,
#NAME VARCHAR(50)
)
AS
BEGIN
IF #ID > 1
UPDATE MY_TABLE
SET NAME = #NAME
WHERE ID = #ID
END
I'm not sure exactly what you're trying to update. Are you trying to change the name on a user record with id = #ID?
ALTER PROCEDURE [dbo].[SP_MY_STORE_PROCEDURED]
(
#ID INT,
#NAME VARCHAR(50)
)
AS
BEGIN
UPDATE MY_TABLE
SET Name = #Name
WHERE Id = #ID and #ID > 1
END
This should do it.
ALTER PROCEDURE [dbo].[SP_MY_STORED_PROCEDURE] ( #ID INT, #NAME VARCHAR(50) )
AS
BEGIN
IF #ID > 1
UPDATE MY_TABLE
SET Name = #Name
WHERE Id = #ID
END
Related
I have the following stored procedure and my goal is to return a result set from it, using the query "select * from #justTmp"
create procedure spAddPerson
#ID int,
#Name nvarchar(50)
as
begin
create table #justTmp
(
num int primary key,
justName nvarchar(50)
)
if #ID in (select C.ContributorID
from Contributors C)
begin
insert into #justTmp
values (#ID, #Name)
end
select *
from #justTmp
end
And this is my java code
CallableStatement cstmt = null;
ResultSet rs = null;
cstmt=conn.prepareCall("{ call spAddPerson(?,?) }");
cstmt.setInt(1, 1);
cstmt.setString(2, "MyName");
cstmt.execute();
rs=cstmt.getResultSet();
int first=rs.getInt(1);
String second=rs.getString(2);
For some reason, whenever I run it, and the above stored procedure is called, I get an exception that says
The statement did not return a result set
when the
rs = cstmt.getResultSet()
code is executed.
Any idea how to fix this so a result set would return and not null?
Thanks in advance
Try this :
create proc spAddPerson
#ID int,
#Name nvarchar(50)
as
begin
SET NOCOUNT ON
...
There are multiple ways but try this once:
create proc spAddPerson
#ID int,
#Name nvarchar(50)
as
begin
SET NOCOUNT ON;
create table #justTmp
(
num int primary key,
justName nvarchar(50)
)
if #ID in
(
select C.ContributorID
from Contributors C
)
begin
insert into #justTmp
values(#ID,#Name)
end
select *
from #justTmp
RETURN
end
On your java code change
call spAddPerson
To
exec spAddPerson
I created a procedure where I could pass a list of procedure names separated by a comma, and then I would like to rename all the procedures from the list by adding a custom suffix in the end.
But I am facing an issue where it would only rename the last item from the list and ignore all the rest. I don't know why it would not rename each one from table variable list since I am calling sp_rename on each item in the list.
Also, I was able to print each loop with raiseerror()
Here's the complete procedure that I written.
CREATE PROCEDURE [dbo].[Util_ProcRename]
#ProcNameListWithComma VARCHAR(MAX)
AS
BEGIN
DECLARE #ID INT
SET #ID = 1;
DECLARE #oldname varchar(200)
DECLARE #newname varchar(200);
DECLARE #NOTUSED VARCHAR(20)
SET #NOTUSED = '_NOTUSED_'+REPLACE(CONVERT(varchar(20), GETDATE(), 101),'/','')
DECLARE #ProList AS TABLE (
ID INT IDENTITY,
ProcName VARCHAR(200),
NewProcName VARCHAR(200)
);
--Get proc names from a list into a table with ID to use in While loop
INSERT INTO #ProList (ProcName)
SELECT P AS ProcName
FROM dbo.SplitText(#ProcNameListWithComma,',')
WHILE (#id <= (SELECT MAX(ID) FROM #ProList))
BEGIN
SET #oldname = (SELECT ProcName FROM #ProList WHERE ID = #ID)
SET #newname = #oldname + #NOTUSED
EXEC p_rename #oldname, #newname
SET #ID = #ID + 1
END
UPDATE p
SET NewProcName = p.ProcName+#NOTUSED
FROM #ProList p
WHERE ID = ID
--TO see the list that got renamed
SELECT
a.Name AS [NewName],
a.type
FROM
dbo.sysobjects a
WHERE
name IN (SELECT NewProcName FROM #ProList)
END
GO
Despite the indentation, you are doing the update after the loop. So, it is only called once.
Move the END to after the UPDATE.
I am trying to create a SQL Server stored procedure to handle updates to a table using some dynamic SQL. The table name required for the update is stored in a table that correlates a table id to a category id. Once the table name is retrieved and the table id is not null, I update the table using a dynamic SQL query as shown below:
CREATE PROCEDURE [dbo].[SP_EBS_CustomForms_SetCategoryData]
(#flag int output,
#cat_id int,
#sort int,
#value varchar(50),
#active int,
#enum int)
AS
BEGIN
DECLARE #tbl as varchar(50)
DECLARE #tbl_id as int
DECLARE #sql nvarchar(max)
BEGIN TRY
SET #tbl_id = (SELECT [tbl_id]
FROM [demodata].[dbo].[ebscustomforms_cattable]
WHERE cat_id = #cat_id)
IF #tbl_id IS NOT NULL
BEGIN
SET #tbl = (SELECT table_name
FROM ebscustomforms_enumtable
WHERE tbl_id = #tbl_id)
SET #sql = 'UPDATE ' + #tbl + ' SET [sort_order] = #sort, [value] = #value, [active] = #active WHERE [enum_id] = #enum'
EXECUTE sp_executesql #sql, N'#sort int, #value varchar(50), #active int, #enum int', #sort, #value, #active, #enum
SET #flag = 0
RETURN #flag
END
END TRY
BEGIN CATCH
IF ##ERROR <> 0
BEGIN
SET #flag = 1;
RETURN #flag
END
END CATCH
END
I want this stored procedure to return an int value indicating whether the stored procedure was successful (0) or failed (1) updating the table.
Points of error are as follows:
#tbl_id variable is null
#tbl is either null or an empty varchar
The table to be updated does not have a record where [enum_id] = #enum
I have noticed that when I try to update a record that does not exist, the procedure seems to return as successful i.e. #flag = 0. However, I would imagine that an error should be thrown because the record does not exist.
I have an id as primary key and I am setting that id=scope identity() in the insert procedure.
But I am unable to use that id with update procedure.
I want to write a procedure that will update the table with the id in the where condition, i.e.,
UPDATE TABLE [table name]
SET col = #col, col2 = #col2
WHERE id = #id
but my id is autogenerated i.e., id int identity(1,1)
How should I write update procedure?
You need to have #id as an in parameter to your stored procedure.
Your stored procedure should probably look something like:
CREATE PROCEDURE <Procedure name>
(
#id INT,
#col1 <datatype>,
#col1 <datatype>
)
AS
UPDATE TABLE [table name]
SET col = #col, col2 = #col2
WHERE id = #id
What I could understand is that you want to update the Table with the recent inserted row using #id = scope_identity(). Please see below the code to achieve this:
create proc abc
#col1 int,
#col2 int,
#id int
as
begin
set #id = ident_insert('TableA')
UPDATE TABLE [table name]
SET col = #col, col2 = #col2
WHERE id = #id
end
Let me know if this helps..
I have a table that has two columns "name" and "ID". where ID is not null.
I am trying to create a stored prcedure to swap the IDs around for two names when imputed here is what i have so far.
CREATE PROCEDURE dbo.procName
#OldName NVARCHAR(128),
#NewName NVARCHAR(128)
AS
DECLARE #NewId0 INT,
#NewId1 INT,
#OldId0 INT,
#OldId1 INT,
#Number INT
SELECT #NewId0 = ID FROM Table1 WHERE [Name] = #NewName
SELECT #NewId1 = ID FROM Table1 WHERE [Name] = #NewName
SELECT #OldId0 = ID FROM Table1 WHERE [Name] = #OldName
SELECT #OldId1 = ID FROM Table1 WHERE [Name] = #OldName
SELECT #Number = 0
UPDATE Table1 SET ID = #Number WHERE ID = #NewId0
UPDATE Table1 SET ID = #NewId1 WHERE ID = #OldId0
UPDATE Table1 SET ID = #OldID1 WHERE ID = #NewID0
Go
All I get is the first name to have the value 0.
I think my logic is correct but it doesn't seem to be working is there something that I am missing?
Try something like
UPDATE Table1
SET ID = CASE
WHEN ID = #NewId
THEN #OldId
ELSE #NewId
END
WHERE ID IN (#NewId, #OldId)
Here is a full example
DECLARE #Table TABLE(
ID INT,
Name VARCHAR(20)
)
INSERT INTO #Table SELECT 1,'A'
INSERT INTO #Table SELECT 2,'B'
DECLARE #NewName VARCHAR(20),
#OldName VARCHAR(20)
SELECT #NewName = 'A',
#OldName = 'B'
DECLARE #NewId INT,
#OldId INT
SELECT #NewId = ID FROM #Table WHERE [Name] = #NewName
SELECT #OldId = ID FROM #Table WHERE [Name] = #OldName
SELECT *
FROM #Table
UPDATE #Table
SET ID = CASE
WHEN ID = #NewId
THEN #OldId
ELSE #NewId
END
WHERE ID IN (#NewId, #OldId)
SELECT *
FROM #Table
This script works if the ID is not a primary Key
CREATE PROCEDURE dbo.procName
#OldName NVARCHAR(128),
#NewName NVARCHAR(128)
As
DECLARE #NewId INT,
#OldId INT
SELECT #NewId = ID FROM Table1 WHERE [Name] = #NewName
SELECT #OldId = ID FROM Table1 WHERE [Name] = #OldName
UPDATE Table1
SET ID = CASE
WHEN ID = #NewId
THEN #OldId
ELSE #NewId
END
WHERE ID IN (#NewId, #OldId)
SELECT *
FROM Table1
go
Your current code fails because:
You Look for #NewId0, and set it to #Number (which is 0)
You then look for #OldId0, and set it to #NewId1
You then look for #NewId0 again... but two lines back, you set it to 0, so it's not in the table any more
I like #astander's solution (upvoted), saved me writing it out myself.
BUT... your comment, "...ID is a Primary Key", raises all kinds of red flags. You really, really don't want to change primary key values [insert long discussion from past classes about primary keys and relational integrity here]. Figure out why you think you need to do it, and then figure out another way to implement that business requirement, such as:
Don't change the IDs, change everything else (name, description, cost, whatever)
Create completely new entries and drop (or mark as completed, discareded, or junk) the old ones
Implement some clever logic based on the underlying business requirements.
under stand the concerns with changing PKs but it has to be done as it would take too long to change all the other stuff. That said I have come up with an answer. This is only the first part of a long script so again its not perfect:
CREATE PROCEDURE dbo.ID #OldName NVARCHAR(128),
#NewName NVARCHAR(128)
AS
DECLARE #NewId INT,
#OldId INT
CREATE TABLE TmpTable (ID INT,Name NVARCHAR(128))
INSERT INTO TmpTable (Name,ID)
VALUES (#NewName,(SELECT ID FROM Table1 WHERE [Name] = #NewName));
INSERT INTO TmpTable (Name,ID)
VALUES(#OldName,(SELECT ID FROM Table1 WHERE [Name] = #OldName))
UPDATE Table1 SET ID = 11 WHERE [NAME] = #NewName
UPDATE Table1 SET ID = 10 WHERE [NAME] = #OldName
UPDATE Table1 SET ID = (SELECT ID FROM TmpTable where Name = #NewName)WHERE [Name] = #OldName
UPDATE Table1 SET ID = (SELECT ID FROM TmpTable where Name = #OldName) WHERE [Name] = #NewName
DROP TABLE TmpTable
go
"11" and "10" were selected as they are not in the table my next mission will be to query table1 and for a random number that dosent exist then use that number to temprary repplace the ID before updating the new ones.
Thanks