After recording the login page script and playback.its giving warning and not allow to login in application..
I have to use wait command for waiting few second for doing all process ..
How can i use wait command for page load
Following approaches are possible:
1) using Test Action (Add >> Sampler >> Test Action).
Its advantage is the following: interval value can be passed as parameter that can be obtained either from file, either generated.
2) One can also look through fixed delay between the search samples whatever response time of the Sample
Actual difference between first approach and second one:
you don't vary pause time depending on response time while webpage proposes a variable pause time to make a request every 30s. With a test action note that if you use transaction controller you won't be able to exclude time taken from response time.
Also one should remember that timers are processed before each sampler in the scope in which they are found; if there are several timers in the same scope, all the timers will be processed before each sampler.
Pay attention to Execution order (section 4.9) of Timers in jMeter.
Throughput Constant Timer usage example.
Related
I am trying to run a test plan wherein in a thread I have multiple requests added. I need to run one event fetching requests at regular intervals of 2 seconds until the complete execution of the thread.
Can someone please help me with the same ?
I have tried running the plan by adding timers and controllers but to no use.
Take a look at While Controller, it executes its children while JMeter Function or Variable you set in the "Condition" input field resolves to true
The delay can be introduced by either using a
Constant Timer - will create a delay before each Sampler it its scope
Flow Control Action Sampler - will create a delay exactly where it's placed in the script
I am new to JMeter. I am working with it the last month. The problem that i am facing is with the graph that shows the active threats over time. What i want to achieve is a linear graph that will show that every 2 seconds a new threat is entering the application and do whatever it needs to do. My set up is as follow:
I can not add loop count to infinite as each user is executing different tasks that can be executed only once. It can not reuse the data and hit the services/tasks again with the use of the same user.
The process is:
Login
Get Requests
Post requests
If i execute my scenario i am getting the following graph:
What i need to do in order to get something like the below:
You're dealing with the Listener which means that it will plot the first data point only when first sampler reports its metrics.
If your first request takes 10 seconds you will see the first dot in the Active Threads Over Time chart at 10 seconds when 3 users are online already.
So if you want to see "smooth" arrival of virtual users you need to add a "synthetic" sampler with a couple of milliseconds response time before your other samplers (for example a Dummy Sampler will be a perfect match), this way listeners will take it as the starting point
Demo:
I am trying to write to a client at the interval of every 1 second using Twisted protocol but when I use client.transport.write() twice, it prints two data on the same line. What I want to do is send first data to client then after certain delay send second data.
Here is how :
client.transport.write(list_of_commands[0])
time.sleep(10)
client.transport.write(list_of_commands[1])
I also tried replacing client.transport.write() with client.transport.getHandle().sendall() as per the suggestion in Twisted transport.write, but it gave the same result.How can the problem be solved?
Twisted is asynchronous single threaded that is run by a main reactor loop, that means if you put a sleep in your code then the reactor is not doing it's job after period of times in your sleep.
You can use reactor.callLater(interval, self.transport.write, data).
I'm using Selenium WebDriver to get some content from a site that dynamically loads it using Ajax. I created a custom Wait class to check for a condition on the page to make sure that the page has loaded before continuing. I used FluentWait to set the polling interval to 2 and timeout to 10. However, I noticed that it checks for the first time at time increment 0, then waits 2 seconds if the condition was false, then checks again, etc.
Since the page takes some time to load, it always is false at the first check, but usually is true at the second. Is there any way to make Wait wait the 2 seconds before checking for the first time? I.e. check at times 2,4,and 6, if necessary, rather than at 0,2,4,and 6?
Thanks,
bsg
EDIT
I've been asked to mention why I want this behavior - after all, I'm using the Wait the way it's meant to be used. The benefit I get from it returning true the first time is the following: WebDriver apparently opens a new socket every time it issues a command to the browser. For whatever reason, these sockets don't always get closed after the call executes. When executing a large number of calls in a short time (for instance, when repeatedly checking for a condition, which is what Wait does), it is possible to run out of virtual sockets, and the driver crashes. (The lack of enough virtual sockets seems to be a known issue on Windows 7, but I can't modify my system.)
The fewer calls to the driver I issue in a short period of time, the less likely it is to overrun the number of available sockets. I have observed that the first check never returns true, and therefore it's just opening a socket for no reason, making the program more likely to crash. That's why I want to wait. I hope this explanation is helpful for someone searching for information as to why they keep getting SocketExceptions in WebDriver.
The obvious answer would be to just insert a time.sleep(2) (or similar method) before your first check. Would that work for what you're trying to do?
I would like to learn difference between Duration and Delay terms on Ranorex tool. Here is an image from my exercise :
Thanks in advance.
In Ranorex the term "Delay" refers to an action that the system will take, i.e. it will DELAY execution of the test for an amount of time (the Duration to be exact).
A "Duration" on a test step is the time to wait BEFORE THE NEXT STEP IS EXECUTED. This is important because it is backwards from what many might understand. Duration does not delay the step it is on, but instead delays the next step.
I don't know this app, but duration is a measure of "ending time minus starting time" of something, and delay is the time before "starting time". I hope it helps.
Delay
A Delay is just a normal action in Ranorex. Other Actions are Mouse, Key Sequence, Validation, ...
It does what the name says. Once this action is executed, it simply delays the execution of the next action for an exact amount of time.
Duration
A Duration is a certain property that all Actions have. Other properties of Actions are Continue on fail, Enabled, ...
The tooltip of the Duration property in Ranorex Studio 10.1.2 says: "The amount of time the entire action takes to execute, including wait time before the next action starts. Does not influence how fast the action itself is performed in the AUT. Example: For a Mouse click action with 10s duration, the click performs in a few ms, but Ranorex Studio then waits the full 10s before it executes the next action, effectively adding a delay. 0ms performs the action and then immediately starts the next action (may cause issues if the AUT isn't highly responsive). Duration does NOT include effective timeout value of a repository item linked to the action.