I am trying to make a tile based game in LibGDX and I have run into some problem. In earlier versions of LibGDX you were able to draw a certain section of a .tmx map instead of a whole and even a section of a layer. Even though , in the nightly builds I cannot find anything about this methods the only thing I have found was drawing of a whole map or one of its layers.
Ideally I would like to draw portion of a map something like draw nao from coords (5,5) to (25,25) . Meaning only the square 22x22 tiles starting from tile in the 5th row/column at position no. 5.
Is it even doable in the newer builds ?
Related
I use godot to create my 3d game. I ran into a problem while creating portals using camera viewport rendering to texture. The problem is that the camera captures unnecessary objects that are behind portal. I partially solved this problem by setting the parameter "near " for the camera at a distance from the camera itself to the portal, but the part behind the portal began to be cut off.
The question is, is it possible to hide objects for a particular camera so that other cameras can see them? Perhaps there is another way to do this, for example by creating a static clipping plane?
Proximity Fade
Probably not what you are looking for, but I'll mention it for completeness sake.
The default material has proximity fade and distance fade, which you can use to make the material disappear if it is too close or to distant from the camera, respectively.
It is important to note that this is not a cull plane, and that the fading is gradual.
Thus, using proximity fade you can make objects near the camera appear semitransparent.
Using Visibility layers and cull mask
is it possible to hide objects for a particular camera so that other cameras can see them?
Every VisualInstance (you know, all things that are visible in 3D) has layers. And every Camera has a cull_mask. If the cull_mask of the Camera does not include any of the layers of a VisualInstance, then the Camera does not see that VisualInstance.
A VisualInstance with no layers will not show on no Camera, even if the Camera has all the layers in its cull_mask (which is the default).
You can either edit the cull_mask of the camera to not include the layers of the VisualInstance, or edit the layers of the VisualInstance, or both.
Using a custom shader cull plane
Perhaps there is another way to do this, for example by creating a static clipping plane?
You can use a custom spatial shader to cut things out based on a plane.
You need to define the plane as a uniforms. For this answer I'll use a point-normal definition of a plane:
n·(r - r_0)
That is:
dot(plane_normal, (world_position - plane_point)
Thus, we define a plane_normal and plane_point uniforms:
uniform vec3 plane_normal;
uniform vec3 plane_point;
The plane_normal gives us the orientation of the plane, while the plane_point is a point on the plane which allows us to position it.
And then use this logic:
vec3 wold_position = (CAMERA_MATRIX * vec4(VERTEX, 1.0)).xyz;
ALPHA = clamp(sign(dot(plane_normal, wold_position - plane_point)), 0.0, 1.0);
Here we are converting the coordinates of the current point to world space, and then using definition of the plane to find the points on one side (using sign), and set ALPHA based on that, such that everything on one side of the plane becomes invisible.
Note: This is not the only way to define the plane. Another popular definition is a 4D vector, where the xyz are the normal, and the w is the distance from plane to the origin.
Sadly, I don't think there is a way to make this work with multiple material passes, because ALPHA controls the blending of the passes, and will not result in transparency. And no, using discard; does not solve it either, because the other passes can write the fragment regardless. Thus, you are going to need to modify your materials to include that.
Further Sadly Godot 3.x does not support global uniforms (see Godot 4.0 gets global and per-instance shader uniforms). Which means you will have to set these parameter everywhere you need them.
Using Constructive Solid Geometry (CSG)
Add a CSGCombiner make the geometry that needs to disappear with other CSG nodes as children.
Then you can, for example, add a CSGSphere with operation set to "Subtraction", and move it with the Camera (for this purpose, I suggest to add a RemoteTransform node as child to the Camera and set its remote path to the CSGSphere).
Of course, it does not have to be a CSGSphere, you can use any CSG nodes for this purpose. For the portal, I imagine you could use a CSGBox and align it to the portal plane.
Note: Currently on Godot 3.3 CSG nodes do not support baking lights. This is a regression. See: Unable to bake lightmap with CSG due to the lack of ability to generate UV2 for CSG nodes.
Portals, actually
Bartleby Lawnjelly has a portal (godot-lportal) module for Godot 3.x.
Being a module, they require to build Godot from source. See Compiling on the official Godot documentation. It is not that bad, I promise. Or use build from godot-titan.
I have to explain that these portals are not portals in the Valve Portal video game series sense… The module lets you define areas as "rooms", and planes as "portals" that connect those rooms, in such way that you can look from one to the other. The purpose of this is to cull entire rooms unless you are looking through one of the portals.
Hopefully that makes more sense with a video. This is a somewhat old one, but good to get the idea across: Portal rendering module in Godot 3.2 - Improved performance. Seeing shadow pooping in the video? Bartleby Lawnjelly also has a custom lightmapper.
I've been searching around the web about how to do this and I know that it needs to be done with OpenCV. The problem is that all the tutorials and examples that I find are for separated shapes detection or template matching.
What I need is a way to detect the contents between 3 circles (which can be a photo or something else). From what I searched, its not to difficult to find the circles with the camera using contours but, how do I extract what is between them? The circles work like a pattern on the image to grab what is "inside the pattern".
Do I need to use the contours of each circle and measure the distance between them to grab my contents? If so, what if the image is a bit rotated/distorted on the camera?
I'm using Xamarin.iOS for this but from what I already saw, I believe I need to go native for this and any Objective C example is welcome too.
EDIT
Imagining that the image captured by the camera is this:
What I want is to match the 3 circles and get the following part of the image as result:
Since the images come from the camera, they can be rotated or scaled up/down.
The warpAffine function will let you map the desired area of the source image to a destination image, performing cropping, rotation and scaling in a single go.
Talking about rotation and scaling seem to indicate that you want to extract a rectangle of a given aspect ratio, hence perform a similarity transform. To define such a transform, three points are too much, two suffice. The construction of the affine matrix is a little tricky.
I'm having problems with google maps, drawing icons was working fine few weeks ago in my project. At some time the icons are very frequently drawing in partly and I don't know what is causing it. It is both happening on my development machine and production server and on all machines.
I'm only using two different icons so I know the bitmap images are not corrupt.
Here below are two sample images.
You'll get more help if you post your outputted JSON. Your gmaps JSON must not have quotes around width or height, like so: "picture":"/assets/dayhome.png","width":32,"height":37,"lat":53.5402,"lng":-113.628
Another fix is to include optimized:false which disables the html5 canvas (the squares that are cutting off the markers).
My much more detailed analysis here: Canvas Tiles Cut Off Custom Markers
Set optimized:false in your Marker options.
If optimized is true (the default), then your marker images are incorporated into the tiles. Unfortunately where markers cross tile boundaries, they are not also used on the adjacent tile, so appear to be truncated at the edge of the tile. Using optimized:false forces the icons to be placed on the map as separate DOM objects.
I vaguely remember seeing something in OpenGL (not ES, which was still at v1.0 on the iPhone when I came across this, which is why I never used it) that let me specify which edges of my polygons were considered outlines vs those that made up the interior of faces. As such, this isn't the same as the outline of the entire model (which I know how to do), but rather the outline of a planar face with all its tris basically blended into one poly. For instance, in a cube made up of tri's, each face is actually two tris. I want to render the outline of the square, but not the diagonal across the face. Same thing with a hexagon. That takes four tris, but just one outline for the face.
Now yes, I know I can simply test all the edges to see if they share coplanar faces, but I could have sworn I remember seeing somewhere when you're defining the tri mesh data where you could say 'this line outlines a face whereas this one is inside a face.' That way when rendering, you could set a flag that basically says 'Give me a wireframe, but only the wires around the edges of complete faces, not around the tris that make them up.'
BTW, my target is all platforms that support OpenGL ES 2.0 but my dev platform is iOS. Again, this Im pretty sure was originally in OpenGL and may have been depreciated once shaders came on the scene, but I can't even find a reference to this feature to check if that's the case.
The only way I know now is to have one set of vertices, but two separate sets of indices... one for rendering tris, and another for rendering the wireframes of the faces. It's a real pain since I end up hand-coding a lot of this, which again, I'm 99% sure you can define when rendering the lines.
GL_QUADS, glEdgeFlag and glPolygonMode are not supported in OpenGL ES.
You could use LINES to draw the wireframe: To get hidden lines, first draw black filled triangles (with DEPTH on) and then draw the edges you are interested in with GL_LINES.
I'm completely new to ArcGIS and ArcMap, but someone suggested this program to me for a project I'm working on.
I would like to animate individual entities on a map, and was wondering if it is possible to do so in ArcMap. I asked this earlier here and a member directed me to a tutorial on animating in ArcGIS. The animation in the guide was over a map spread (ie. each pixel on the map displays, say, a different color to indicate population data in the area). However I realized that if I zoom in a lot, eventually the image will degenerate into pixels, which is why I need an actual object to mark a certain point. I checked some online tutorials and it seems like we can place markers on the map. Can someone tell me if it is possible to animate these markers (for example via a for-loop)? And if so, could you point me in a direction where to start?
Thanks in advance!
You can animate layers in ArcMap is the short answer. Its not as simple as using the timeline feature in Google Earth for example though. But then ArcMap is much more than just a visualization tool.
This help page on the ESRI web help looks like a good place to start.
I'm not 100% sure what you mean by the image degenerates into pixels. Are you saying that the markers were single points in the layer. Unlike Google Earth you are not confined to simply plotting points on the map. You can draw completely arbitrary shapes in ArcMap, which can be defined to cover actual areas of the map, so when you zoom-in the shape gets larger.
The way you need to load data into ArcMap to produce an animation isn't too simple. There might be other ways to do this, but the way I know of is to generate a NetCDF file. This file contains a 3D matrix of layer data, where each layer is separated through time. Because you generate a matrix, you are effectively placing a raster image over the map. Thus if you want to cover a large area, each matrix becomes large, and you multiply that by the number of time slices you wish to animate over.
Once you have a NetCDF file with your data in however, getting ArcMap to animate it and produce say a .avi file is pretty simple.
You could try just loading some of the example NetCDF datasets into ArcMap to see how/if they will work to get you started.
Hope that helps.
The upcoming v10 will have better time-aware capabilities, which will allow for animation.