I receive the following error message about 50% of the time when trying to publish an InfoPath 2010 form template to my corporate SharePoint site:
The image text reads:
Infopath canot save the following form: https://sharepoint.site.com/home/subsite/form_library
This document library was either renamed or deleted, or network problems are preventing the file from being saved. If this problem persists, contact your network administrator.
The thing that is odd about this is that I can resolve the problem by rebooting my system and reauthenticating to the site. I am then able to republish my template at least once.
Things I have tried:
Clearing my SSL state in Internet Explorer, reauthenticating to SharePoint in the browser
Starting InfoPath from the run prompt with the following switches: infopath /cache clearall
Rebooting (always fixes the issue - would like to avoid this)
My corporate SharePoint site sits on a different domain than my desktop. This could be an issue here, but I don't know why it would persist after reauthenticating.
This topic may fit more neatly on the SharePoint SE site, but the potential for networking related problems made me feel the need to post it to SO.
For me, I was able to resolve by closing out of IP and then bringing up Task Manager and killing a still living IP process. Opening IP and republishing. No reboot required.
Hope this helps someone.
This issue occurs because the Desktop Experience feature is not enabled on the Windows Server 2008 R2 server. Therefore, connections cannot be made from the Windows Server 2008 R2 server to the SharePoint server.
Source https://support.microsoft.com/en-us/kb/2752612
Related
Dashboard designer error:
The url is not available,does not reference a sharepoint site, or you
do not have permission to connect
This is happening to the site collections under one web application only in the whole Farm. Other web applications are working fine and I can open site collections through dashboard designer.
Any suggestions????
Unattended acc is all set, Site feature is activated, site collection is added to trusted location. On database side, app pool acc has db owner access to web app db. PPS is db owner there as well.
I think this indicates to a deployment issue on this app. Maybe something went wrong when deploying webparts, the assemblies couldnt be registered or were not copied correctly. It could also be a specific access restriction issue in SharePoint or in the file system that SharePoint relies on.
Without any log information it is hard to say what is really the problem - but - have a look at windows event log for any further indications, the general log files that sharepoint/asp.net write or also consider using monitoring tools that can tell you more details on what is happening here.
I recently wrote a blog on top deployment mistakes in SharePoint. I highlight exactly these deployment mistakes in more details: Link
Andi
Firstly, please don't reply with the generic advice not to automate Word on a server or a link to the MS web page on "how to automate word on a server if you really must". I am aware of this.
I have a process which runs as a Windows service and uses .Net OLE interop to automate Office (mostly just Open and SaveAs). This code has worked reliably for 8 years on literally hundreds of servers using many combinations of Windows and Office versions, both 32 and 64 bit, so I am happy that the mechanism is reliable. So far...
With Server 2012 R2, it works with PowerPoint and Excel but fails trying to open a word document:
System.Runtime.InteropServices.COMException (0x800A16A0):
The file appears to be corrupted.
at Microsoft.Office.Interop.Word.Documents.Open...
My observations so far which may or may not be relevant:
fails on all documents
works fine in Windows 8.1
the same problem has happened both on a customer site and in our test environment, so is unlikely to be purely environmental
my application is using .Net 3.5
the code is linked against the 2003 Interop assemblies (obviously later office versions are supported by assembly binding redirection)
we have tried it with office 2013 both 32 and 64 bit with the same results, but not tried earlier versions of office
it fails whether the service is running as LocalSystem or as a standard user account
if we run the service process in the foreground (i.e. literally double-clicking on the executable) the problem does not happen
Obviously I still have things to investigate but interested to hear if anyone else has seen this specific problem even if you haven't solved it. Please note there are many difficulties and problems with office automation so unless your symptoms are very similar to mine, you probably don't have the same problem.
Same issues here but got this fully resolved now.
I have a Word 2013 in combination with Windows 2012 R2 Server running in a service process which does everything I want without the need of a interactive session to be started. I use this to convert documents to PDF files. Inside the Windows service I host a WCF service.
Create folders: (replace System32 with Syswow64 depending of you use x86 or x64 bit edition)
C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Windows\INetCache
C:\Windows\System32\config\systemprofile\Desktop
Last and most important step!
Start - run - dcomcnfg.exe
Open properties -> Component Services - DCOM Config - Microsoft Word 97 - 2003 Document (Note that the version is not mentioned here but that does not matter Office 2013 will use this as DCOM config)
Open tab Identity. Configure the run as a the local Administrator account. I did some tests Word 2013 will work just fine even if no interactive session is started for the user.
We(My Company) are currently facing the same problem, it is pretty much a carbon copy of your problem. We have completed extensive testing around this area and I am now in talks with MS support engineer trying to find a work around.
Unfortunately this is something they don't want us doing, I think they have tightened security on the Windows Server 2012 to stop people from doing this.
What we have tried which should help you:
Server 2012 | Word 2007 | Failed
Server 2012 | Word 2010 | Failed
Server 2012 | Word 2013 | Failed
Client 8.1 | Word 2013 | Failed
Our problem stems from the fact we are running word with a user who isn't associated with the LOCAL system user(i.e. the type of user you have when you are logged into the machine) Windows will just not allow this to happen anymore.
Myself and the MS Engineer are working on "Fooling" windows into thinking it is running Word as a local service, however the MS Engineer said it was a long shot at best and so far everything we have tried has resulted in failure. It's not looking good.
Sorry I don't have an answer for you, but I suppose its good know you are not alone?
I had the same problem with MsOffice 2010 (32bits) and Windows Server 2012R2 (64bits). Word, Excel, Powerpoint don't work with localAdmin.
I created the folder C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Windows\INetCache like Andy did and it now work perfectly !
Thanks Andy :)
My service use MS Word for data merging and concatenations functions.
I'm using Word 2016 on Windows Server 2012 R2 .
My log says that Word is opened but when the document is opened is throwed an error.
I've first created all the 4 folder suggested:
C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Windows\INetCache
C:\Windows\System32\config\systemprofile\Desktop
C:\Windows\SysWOW64\config\systemprofile\AppData\Local\Microsoft\Windows\INetCache
C:\Windows\SysWOW64\config\systemprofile\Desktop
Only after creating the last directory the problem was solved.
I've not used DCOM config; my application use an user account with administration priviledges; there was no need to use LocalSystem account with "interaction with desktop" options.
Thank you.
We had a working solution for this for quite some time. However the solution broke when we tried to install it on a fully updated 2012 RTM R2 Server. On a 2016 Server we don't see this issue.
In order to make it work again on Windows 2012 R2 Server and also in a none interactive desktop environment:
Follow these steps!:
Actions to solve the issue on a Windows 2012 Sever R2 which is fully updated by Windows update:
Start - Run - mmc comexp.msc /32
Expand: Component Services – Computers – My Computer – DCOM Config
Search for: Microsoft Word 97 – 2003 Document
RMC – Properties – Go to tab: Identity
Set from “The launching user” to “This user”.
Use a “local Administrator account” which has once singed in to the server machine and has opened Word at least once in an interactive desktop.
Last step: REBOOT THE SERVER! And use a new document name to test your solution again.
Like known and said in the other answers these folder need to be created and accessible by the calling user (local system) normally or the user you configure in the prev steps.
C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Windows\INetCache C:\Windows\System32\config\systemprofile\Desktop
C:\Windows\SysWow64\config\systemprofile\AppData\Local\Microsoft\Windows\INetCache C:\Windows\SysWow64\config\systemprofile\Desktop
Thanks for all the help OP and contributors. After creating the INetCache folder it worked out for me. I have done the following to get everything working without an active session(WS2012 R2 / MS Office 2013 64x):
Create a local admin user and log in to setup any printers(printing to file) as well as default word options.
Point the DCOM config identity to the local admin user created.
Create the following file :C:\Windows\SysWOW64\config\systemprofile\AppData\Local\Microsoft\Windows\INetCache
For some machines you need to run " mmc comexp.msc /32 " to set the DCOM setting for MS Word. I found that we needed to do this when 32 bit version of Word was installed only.
I've just been going nuts to sort this and have tried numerous solutions. I finally resolved this by changing the Identity to "This User". I then used the account that my app pool ran under and also had to add this user the "Administrators" group..
Phew... hope this helps someone too.
I am trying to save an Excel 2010 file to a Sahrepoint 2010 document library but keep getting the error:
"You can't open this location using this program. Please try a different location"
Googling this suggests enabling "Desktop Experience" on the server which I have done. All Excel services are activated.
Has anyone come across this and been able to resolve successfully? I am wondering if this is more security related but the security set-up looks fine.
Any suggestions?
Thanks
I think that there are potentially a couple of things that could solve this problem depending on your set-up.
You are right that a lot of internet advice is to enable desktop experience, but if you are not running on the server or if you have already done this then one of the suggestions below could help.
This is only for dev environments however.
If you are running on the server and trying to use your app as admin then configuring IE ESC to turn off enhanced security for Admins should help
If you are running off server and have the issue and do not want to turn off IE ESC (on the server) for users then you need to enable a mechanism to allow auto-logon, either through integrated security (i.e. you are part of the domain), accessing through an anon web-site port on your SharePoint app (set-up anon web access in SharePoint) or set up and store a WebDav link and use that as the open/save URL.
My (unconfirmed) theory is that there is some auto-login going on in the background that hinders a streamlined office integration. Most of the time, SharePoint will be set up with Kerberos (not NTLM) or be in anon mode so enabling desktop experience if running on the server will be the best first step to try.
Hope this helps.
The problem is that the full path to the file is too long.
I had this problem with a PowerPoint presentation. The full path to the file was over 275 characters. When I shortened the file name to bring the full path under 250 characters, I was able to open the file normally.
I installed Microsoft SharePoint and Project PWA on Windows Server 2008 R2.
When I want to open Library in Windows Explorer, I randomly get an error:
Your client does not support opening this list with Windows Explorer
When I open IE it's working for 1st and 2nd time, but after some clicks it's not working anymore and I need to restart IE and then it normally works for couple of times.
When it not working through Sharepoint it also not works via \server\DavWWWRoot\PWA and oposite.
I'm searching through the web for weeks and didn't find any solution.
Do you have any idea what should be wrong here. Any suggestion is welcome :)
I had the same exact issue with Windows 7 and explorer view. The following steps resolved the issue for me:
First - be sure that the Web Client service is running (run>services.msc).
Next - In I.E. check Tools>Internet Options>Security>Local Intranet>Sites>Advanced and add the site that you want to use explorer view with.
This finally fixed it for me. I hope that you have already found a solution to this issue! I was surprised at how difficult it was to find a solution to this problem!
This error message is a symptom to a billion different problems.
I solved this problem when I realized my XP32 box could do this just fine with IE8. So I reverted to IE8 in 7x64 (you have to do it by uninstalling updates for IE until you're back at 8) and it didn't work. The build versions were different and on the 7x64 "about" box it said IE8 was using 256-bit cipher while in XP32 it had 128-bit. That to me was a hint that there may be 64-bit issues even when you run the 32-bit executable.
Then I found this hotfix so I reinstalled the windows update for IE10 and then installed this hotfix. Now I'm able to open the TeamCenter site in question in windows Explorer. IE10 reports it's version 10.0.9200.16686. I cannot guarantee that it was the hotfix alone (and not also the reinstallation of IE10) which fixed it. But I'm willing to bet it was the hotfix alone.
In XP I found it impossible to then map this network location to a drive letter, as mapping doesn't like URL's. However in Windows 7 you can transform the URL so that it is interpreted as a Windows share. If the URL of a given folder is of this form:
https://somesharepoint.com/folder1/folder2/folder3
you can also access it as
\\somesharepoint.com#SSL\DavWWWRoot\folder1\folder2\folder3
and, in this form, it can be mapped to a drive letter.
I do have issues at that point that even with IE10 open and logged in to the site I see some random time-out like problems and I get kicked off (and prompted to log in again in IE10). My situation is complicated because the site I'm accessing requires an Exostar token to log in, so I have to log in via website no matter what.
If it helps any one do the steps suggested above:
Make sure to use 32 bit internet explorer (program files (x86)/internet explorer).
Like was mentioned above Web client must be started.
You may also need to add your site to trusted sites in internet explorer.
Make sure enabled protected mode in internet options is disabled.
This is what finally fixed it for me: Check "Keep me signed in" on the login page. This was the key for me. Will not work without it checked in my case.
I had the same symptoms, and it turned out I don't have a root site collection. Creating one solved this for me.
Summarized the troubleshooting steps here:
http://letitknow.wordpress.com/2012/07/22/your-client-does-not-support-opening-this-list-with-windows-explorer-error/
There can be multiple reasons for it.
One could be using IE x64 version. It won't work there.
Secondly, check out this blog:
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
I experienced the same problem as well.
And I found out that if none of the above options are working, and if you work in an organisation, maybe the proxy is blocking the "Open with Explorer" option.
I did the same, and removed the proxy and it worked just fine.
this fixed it for me ( however in windows server 2008 you may need to install desktop experience i think its called)
After you log into windows go into services then restart the WebClient then see if you can use explorer view without the error " your client does not support. blah blah blah" if it does work then. make a batch file that says:
net stop webclient
net start webclient
then make a scheduled tasks that runs that batch file at start up. Have it run as a user with administrative rights, make sure you tell it to run even if user is not logged in. it should prompt you for the password of the admin account you selected. this worked for me with windows 7.
I found online where the error can occur intermittently with SharePoint 2010, however I think the SharePoint version is irrelevant. They said the client polls for a SharePoint root site and that the error occurs if one isn't found.
We have not seen the error since I created a root site even though we’re only using WSS3. Our errors began when we changed clients to Windows 7. So in our case it sounds like the issue could be the root site polling due to an IE8 security change in Windows 7.
SOLUTION:
*you on x64 bit machine* so solution is that there is no problem but you are using the wrong IE shortcut.
There are different IE types you can use (just type Internet Explorer in start search bar) and you will see..
Internet Explorer (64-bit) - won't show any sharepoint add-ons
Internet Explorer (No Add-ons) - won't show any sharepoint add-ons
Internet Explorer - only this will show sharepoint add-ons and will
work so basically make sure you always use this version of IE
i am unable to Start Profile Synchronization in sharepoint 2010 from central admin
due to which the Compile Audiences does not work
an error message pop up when i click on Start Profile Synchronization
" " can not navigate to the requested page while user profile synchronization is running please wait for current synchronization run to finish. ""
please help regarding this problem
thanks in advance
this problem occurred in windows 7 how ever it worked fine with Server2008
The way i understand it, when you install sharepoint 2010 on your desktop (Windows 7), certain components are very picky about how they are installed (user profiles sync), and some just wont install (FAST search).
This is pretty much the reason i stuck with creating vm's for development.
The best way to resolve this is, open the Forefront Identity Manager 2010 and check for the actual failure. Most of the cases you get problems because of the user trying to connect to AD do not have replication directory changes access.
Take a look at this post:
http://sharepoint-2010-world.blogspot.com/2011/02/cannot-navigate-to-requested-page-while.html