We are trying to model our new ordering application using DDD.
I see a window called Layer Explorer in visual studio.
Can we use this feature to model complex business application
spanned over multiple layers?
Is there any advantage of using this
compared to representing layers in flat block diagram?
I would stay away from tooling to help you model. Whiteboards, IKEA paper rolls, and good markers are the way forward ("#ziobrando style" TM). Nobody is waiting for another class diagram or "architecture" diagram. Communication, modeling behavior, validating what you came up with together with the domain expert using his scenarios, etc ... are far more important than static diagrams. Structural models are good at establishing part of the glossary, i.e. the nouns of the domain you're solving problems for. At best they show you the relationship between two nouns and cardinality may give away some hints as well.
Probably not the answer you wanted to read ...
Related
Should I put the test classes in the UML diagram? I can't find any "best practice" about this!
It depends. Firstly "the UML diagram" suggests that you are creating a single diagram. This is definitely not good practice. Create as many diagrams as needed lighting certain aspects of the model. So - test cases would be one of those aspects. That means: put them in (a) separate diagram(s).
To add a suggestion, if you want to model tests, you can look to UML testing profile ( UTP link) it provides needed elements to model tests, requirements and so on.
You can use SysML also since it integrates a part of UTP.
It definitely depends on context. Who is going to use the UML model and what will they use it for? In general I would say that adding test classes is going to clutter a UML model and make it difficult to understand - so no. But if the context is that the testing is what you want to explain, then clearly the test classes are going to be pretty important.
As Thomas Kilian points out, creating a number of diagrams from one underlying model is probably the right answer - and being able to do this is one of the reasons you would use UML rather than a simple diagram.
This is a preference. You can choose to or choose not to.
I would say it's better practice to have the tests modeled into the solution. But I wouldn't claim I always follow best practices 🙊
There are many diagrams needed in modeling a solution. I would focus on three: Analysis, Design, and Implementation. All three are class diagrams. All three define your solution at different abstractions.
In the analysis, you're closest to the requirements and the beginning of your solution. In here, you would want to have broad classes. I would not put tests in here since this diagram is still trying to get the shape of the solution from the user and their requirements. An analysis diagram would only have class names in a box, with lines which show their associations.
The design diagram would go into a little more detail on how classes would be built. The blueprint of the application would take shape in the design. This design can be given to any programmer and they write code which would build the solution. The interesting part of the design diagram is that it could also be given to a test engineer and they would write proper tests for the solution to be created.
The implementation diagram is the lowest level class diagram which is created. Most times, I would create this in retrospect. The implementation diagram should be a verbatim translation of the codebase. In the implementation diagram, I would have my test classes included for completeness.
Note, these are my views which I sometimes do not follow to the letter because of business constraints. However, in an ideal world, this is how I would prefer my modeling done.
I am beginning in UML and software analyse and i do not understand how UML and diagrams can influence coding and software architecture while we can directly build the code and its data base without diagrams.
I read lot of tutorials abouat the subject but not enough to understand the utility of UML in coding.
I understand everey diagram and its role. That is not my problem but i do not yet understand their roles after the analyse and design phase.
So what is the role of UML in coding phase of a software ?
Thank you.
The comment by #xmojmr already puts it right. UML creates a model (hence the M in UML) of a system. A model reduces information of a system to a level so it is a) manageable and b) complete. Human brains are not computers and you need a means of communication what the system is all about. You can do that as pure code, as paper document and as UML model. A combination of all is not uncommon. As long as you have tiny systems you can live with pur code and tools like Doxygen. But once it starts getting complex you need some handles. UML offers these to end users, architects, testers, developers, managers, etc. Along with UML you will also need a methodology. UML delivers the syntax how to document a system. But you need some structure above to write a nice novel.
UML-based models play an essential role for coding/implementing a software system in model-based (or model-driven) development. The basic idea is that you start making a model of your problem domain (the domain model), then you derive from it a platform-independent design model, which can be transformed into platform-specific implementation models (e.g. for Java- or C#-based platforms) that are finally encoded in the target languages.
The most prominent part of model-based development is the encoding of model classes (forming the model layer in an MVC architecture for apps) based on a data model (a UML class model) that has been derived from an information design model, which was obtained from a domain information model (where all these information/data models are UML class models).
You can find an instructive example of model-based development in my tutorial book Engineering Front-End Web Apps with Plain JavaScript.
This one is in my point of view a duplicate of that other question. It can't be flagged because there is no accepted answer. The related question on meta stackexchange does not provide a clear solution to that situation.
I think my personal answer was relevant and is applicable to the current question.
To be synthetic, Martin Fowler considers current uses of UML. I think he describe the current practices. Perhaps should these evolve ?
Perhaps would the initial question be the right place to discuss ?
I developing a 3 tier architecture for an MVC4 webapp + EntityFramwork5.
I want to keep separete the layer, so only DAL knows that I'm using EF, for example.
Actually I have a lot of classes to manage that:
DAL
Entity POCO
Entity DataContext : DbContext
Entity Repository
BL
Entity ViewModel
Entity Service(instantiate Entity Repository)
WEB
Entity Controllers (instantiate Entity Service)
This is working but is quite hard to mantain. I was thinking to remove the Entity Repository in DAL and use directly the DataContext (if I'm not wrong, after all DbContext has been desingned to be a Repository and a Unit of Work), but that will force me to add a reference to EntityFramework.dll in my BL. Is not a big issue, but I0m not sure it is the best choice.
Any advice?
(I hope I gave enough informations, if you need more, just ask)
You can use this this and this article.
An experienced Architect does not need to go through every single step in the book to get a reasonable design done for a small web
application. Such Architects can use their experience to speed up the
process. Since I have done similar web applications before and have
understood my deliverable, I am going to take the faster approach to
get the initial part of our DMS design done. That will hopefully
assist me to shorten the length of this article.
For those who do not have experience, let me briefly mention the general steps that involved in architecturing a software below...
Understand the initial customer requirement - Ask questions and do research to further elaborate the requirement
Define the process flow of the system preferably in visual (diagram) form. I usually draw a process-flow diagram here. In my
effort, I would try to define the manual version of the system first
and then would try to convert that into the automated version while
identifying the processes and their relations. This process-flow
diagram that we draw here can be used as the medium to validate the
captured requirements with the customer too.
Identify the software development model that suite your requirements
When the requirements are fully captured and defined before the design start, you can use the 'Water-Fall' model. But when the
requirements are undefined, a variant of 'Spiral' can be used to deal
with that.
When requirements are not defined, the system gets defined while it is being designed. In such cases, you need to keep adequate spaces
in respective modules, which later expansions are expected.
Decide what architecture to be used. In my case, to design our Document Management System (DMS), I will be using a combination of
ASP.NET MVC and Multitier Architecture (Three Tier Variant).
Analyze the system and identify its modules or sub systems.
Pick one sub system at a time and further analyze it and identify all granular level requirements belonging to that part of the systems.
Recognize the data entities and define the relationships among entities (Entity Relationship Diagram or ER Diagram). That can
followed by identifying the business entities (Some business entities
directly map with the classes of your system) and define the business
process flow.
Organized your entities. This is where you normalize your database, and decide what OOP concepts and design pattern to be used
etc.
Make your design consistent. Follow the same standards across all modules and layers. This includes streamlining the concepts (as an
example, if you have used two different design patterns in two
different modules to achieve the same goal, then pick the better
approach and use that in both the places), and conventions used in the
project.
Tuning the design is the last part of the process. In order to do this, you need to have a meeting with the project team. In that
meeting you need to present your design to your team and make them ask
questions about it. Take this as an opportunity to honestly evaluate/
adjust your design.
Just I am new to Object Modelling.I want to know still there is a need to use Sequence Diagram, Use case Diagram to develop an object model or any other new technology is available?
Update :
CRC (Class,Responsibilites,Collaborator) is very limited ?
It depends on the team or teams you're working with. The chief benefit of UML is that you can share diagrams with other individuals and teams without having to learn each others diagramming language. If the team you're working with doesn't know UML, it may not be worth going down that road unless everyone is interested and you know you'll be working together for a while.
In my experience UML sequence diagrams and object model diagrams are very usefully and generally understood by all. Sequence diagrams in particular have the ability to resolve design issues through the disipline of their construction. I haven't found use case diagrams to be as useful. Requirements are challenging and strongly dependent on human and organizational factors regardless of the methodology.
If you're communcating with non-technical stakeholders, UML is a waste of time because they won't have studied it. Use simple, well annotated diagrams. Colors are very effective.
If your team is all onsite, sometimes there's nothing better than a couple of whiteboards and a freeform diagramming style.
You don't necessarily need these items. They are just aids which are available if you choose to utilise them. They are particularly useful in a business environment where you need to articulate your architecture to fellow developers, but you can choose to use whatever you like, inc. your own personal standards or no standards at all!
"any other new technology is available?"
No.
UML pretty much dominates. A classic ERD is just a specialized class diagram that omits the method box from each class. Also, classic ERD's use crows feet instead of text annotation for cardinality and optionality. So ERD's are actually part of UML.
You can read about OPM, if you want something slightly different. They appear to combine an activity diagram and a class diagram into one thing: a process-data diagram.
I am currently trying to draw a set of UML diagrams to represent products, offers, orders, deliveries and payments. These diagrams have probably been invented by a million developers before me.
Are there any efforts to standardize the modeling of such common things? Or even the modeling of specific domains (for example car-manufacturing).
Do you know if there is some sort of repository containing UML diagrams (class diagrams, sequence diagrams, state diagrams...)?
There is a movement for documenting (as opposed to standardizing) models for certain domains. These are called analysis patterns and is a term Martin Fowler came up with. He actually wrote a book called Analysis patterns. Also, he has a dedicated section on his website where he presents some of these patterns accompanied by UML diagrams.
Maybe you'll find some inspiration that will help you in modeling your domain. I've stressed the word inspiration as I think different businesses have different requirements although they operate the same domain so the solutions you might read about may not be appropriate for your problem.
There are many tools out there that do both - but they're generally not free!
Microsoft Visio does both and is extensible. For UML artefacts they come with auto generators into VB/Java template code - but you can modify them to auto-generate any code. There are many users of Visio that have created models from which to use as templates.
Artisan Enterprize is by far the most powerful UML tool (but it's not cheap).
Some would argue that Rational Rose or RUP is the better tool
But for Car-Manufacturing and other similar real world modelling, by far the best tool is Mathworks Simulink (not because it's one of the most expensive). It is by far the best tool beccause you can animate the model - you can prove the model working before generating the slik code (in whatever grammar/language/other Models you care to push it)!
You can obtain a student license for around £180; with the 'real thing' pushing £4000 (for car-related artefacts). The full product with all the trimmings is about £15k. Simulink is also extensible with a C like language though there is a .Net addin and APIs to use a plethora of other langhuages. And, just like Visio there is a world-wide forum creating saleable, shareware & freeware real world model templates. Many world-wide Auto-Manufacturers are already using Simulink.
I think that MiniQuark question is really good and will sooner or later be provided by vendors such as Omondo, Rational IBM etc... Users doesn't just need tools, they need models out of the box and just add their business rules inside an existing well defined architecture. Why to develop from scratch a new architecture if the job has already be done ? In Java we use plenty of frameworks, existing methods etc...so why not to go one level higher and reuse architecture ? It is today impossible to guess how a project will evole and new demands are coming every day. We therefore need a stable architecture which has been tested previously and is extensible. I have seen so many projects starting with a nice architecture then realizing in the middle of the project that this is not what is the best and then changing their architecture. Renaming classes, splitting classes, creating packages etc...after the first iteration it is getting a real mess. Could you imagine what we found after 10 iterations !! a total mess !!
This mess would had been avoided if using a predefined model which has been tested previously because the missing class, or package etc..would have already been created and only a class rename would be sufficient for architecture purposes. Adding business rules methods will end the codding stage before deployment test.
I think there is a confusion between patterns and the initial question which is related to UML model re usability.
There is no today any reusable model out of the box which has been developped. This is really strange but the job has never been done or never been shared.
Omondo has tried to launch an initiative without real success. I have heard that they are working on hundred of out of box models which will be open source and given for free to the community. I hope this will be done because this is really important for me and would save me a lot of time at the beginning of a project.