cant create peer to peer with apprtc and apprtcdemo for android - webrtc

I have installed the apprtc python application in my linux server, its ok when trying to connect between browsers, but when I'm trying to create peer2peer with the apprtcdemo app for android, I get this error in my channel.html "the provided token is no valid", I see that when I change the android app url https://apprtc.appspot.com/?r= to a custom domain , its weird because if I just use the first url it works...
Could someone help me with that?
Tks very much

There are two android apk available for WebRTC, appRtcDemo and webRtcDemo. appRtcDemo apk can be used for android device to browser connectivity. You need to provide room id to connect to one room. If you are the room initiator then you have to enter -1.
If you want to connect two android device then you have to compile and install webRtcDemo apk. This apk interface provide place to enter ip address of another device and vice versa then both device will be connected.
Please go through http://www.webrtc.org/reference/getting-started for more information. Both the apks i've compiled and installed and checked how it works.

Related

Unable to connect Android phone to my project with Expo

I created my project in react native by CLI:
_npm install -g create-react-native-app
_create-react-native-app AwesomeProject
_cd AwesomeProject
_npm start
Then I installed expo in my Android phone, and scanned a QR code on my computer screen.
However, my phone can't connect to project, and I don't know why. It just loads and fails. This is error message:
Could not load exp:// 192.168.56.1:19000. Network response timed out.
This is view error:
"Uncaught Error: java,not.SocketTimeoutException: faild to connect to/192.168.56.1 (port 19000) after 10000 ms.
I'm trying to fix it, but still can't get it working. My phone and my laptop are on the same network. What can I do now?
I had the same problem but solved by running expo start --tunnel
Select LOCAL instead of LAN.
I kicked myself when I fixed this.
I had the same issue, turns out my firewall was blocking my connection to the development server port (for me it was 19000). Solved it by disabling firewall.
Choose Tunnel Instead of LAN or Local in connection tab. This solved the issue for me.
Keep a look on this issue for the answer:
https://github.com/react-community/create-react-native-app/issues/60
Make sure that your device and computer are one same LAN/Wifi. It will work.
Also use LAN option.
check open port using
ufw status verbose
And if you don't see the port You are working on
for example 19000 => expo
try this
ufw allow 19000
I've had a similar problem on iOS - the project showed up in the Expo app but didn't want to connect.
Here's what I did:
Connect your PC to your device through USB cable
Download the newest xde from: https://github.com/expo/xde/releases
Install XDE, create a new project from the gui (do NOT use your old project from create-react-app, as it may also show up in XDE) and click the newly created (in XDE) project under "My Projects".
Now your project should show up in the Expo app on your phone. If it doesn't try sending yourself the link to your app over email (to your own inbox, and open the link on your phone), mine looks like this: exp://5c-gp9.[accountname].my-new-project.exp.direct:80
I had this problem when my phone was connected via wifi and my destop was connected via LAN. I changed the connection mode in the browser window to tunnel, reloaded the expo app and was able to connect to my application. This was on my iOS device.
I got this issue on Win 10 with android and solved by the adding a firewall rule for my device (device IP as remote). I was using ESET NOD antivirus and it was block the device from accessing node.exe
for local testing e.g comnputer , simulator
expo start
for Real mobile device
expo start --tunnel
I'm on windows 10.
My network was set to public, but it needed to be private - so that it could safely expose devices like printers and in this case the Expo connection.
I went in my Wifi setting and clicked on Private:
If you are using windows 10 do the following. It worked for me
1. Check if your phone and pc are sharing the same router/hotspot/wifi connection. better still you can connect your pc to your phone hotspot.
2. Configure the network you are using as private. you can do so using this link https://www.digitalcitizen.life/how-set-your-networks-location-private-or-public-windows-10/
3. Off your windows defender and any other antivirus. The windows and other antivirus defender acts as a firewall and prevents expo client from working.
It will work I assure you
I was having the same issue, the solution is easy just make a Firewall rule that allows connection from your mobile device to your PC. open port number 19000 and in the IP put your phone IP address then allow the connection TCP/UDP in both directions, and everything will be OK.
Usually, you can edit the Firewall rules through your antivirus installed on your PC.
Careful don't disable your firewall, it will hurt you a lot.
This problem is due to the sdk version of the project is not compatible with the expo go ,so go to app.json of your project and edit to the latest version of sdk

IBM MobileFirst 8.0 WLAuthorizationManager.obtainAccessToken() No Response

I'm previewing the MobileFirst app (Cordova) on both browser and iOS Emulator but there doesn't seem to be any response when I call WLAuthorizationManager.obtainAccessToken().
I've tried to allow cross origin request but still face the same issue. Does anyone have any suggestions for what I should look at?
I had a similar issue on the iOS emulator. I even used Wireshark to see what was happening and the app never fired the authorisation request.
In the end I found that if you're running XCode 8.x, you have to enable keychain sharing by selecting the project -> Capabilities -> Keychain Sharing, and setting it to On.
After that I had to register the app again and all worked fine.
Make sure when you register or push the app and you're prompted for the version number, that you enter x.x.x instead of x.x - otherwise the server will not recognise the app.
Another thing to double check is the mfp:server runtime and url values in the config.xml file, if your pc's ip address has changed then the url value could be incorrect.

can't able to run react-native app in Android device

hai every one i am trying to run the react-native android app in device then it throws an error like as mentioned below
can any one please give me suggestions for how to solve this error,Any help much appreciated
Try following the steps on the guide page.
You may have to set the address of your dev server.
Configure your app to connect to the local dev server via Wi-Fi
Make sure your laptop and your phone are on the same Wi-Fi network.
Open your React Native app on your device. You can do this the same way you'd open any other app.
You'll see a red screen with an error. This is OK. The following steps will fix that.
Open the Developer menu by shaking the device or running adb shell input keyevent 82 from the command line.
Go to Dev Settings.
Go to Debug server host for device.
Type in your machine's IP address and the port of the local dev server (e.g. 10.0.1.1:8081). On Mac, you can find the IP address in System Preferences / Network. On Windows, open the command prompt and type ipconfig to find your machine's IP address (more info).
Go back to the Developer menu and select Reload JS.

GDK retrieving account information

I am a Google Glass application developer. During developing one application, I encountered some problems.
My application have landed on MyGlass and it's on review process, so it's not publicly visible. It only can be seen by me.
The problem is:
When I turn on my Glassware in MyGlass, my glass device never receive my application. Should I receive it or not? And why didn't I receive it?
I have launched the method mirror.accounts.insert.execute() from https://developers.google.com/glass/develop/gdk/authentication, and it didn't raise an exception, but I didn't receive the account information and the authToken on my glass device. This is because I haven't received my application on my glass device, am I right?
This is indeed correct: the token will only be sync'ed and available once the APK from MyGlass has been downloaded to your device and installed. After this first installation, you can safely replace the APK with a development one using adb install -r as long as it's using the same certificate.
Make sure to check that your device is connected to the internet, especially through WIFI. If that doesn't work, ask the Glass review team to help you out and check if there are any internal issues that would prevent your APK from being downloaded.

Android server not available at http://localhost:8085/wd/hub

I am in the means of setting up of android web driver and followed the same steps as mentioned in the url : http://code.google.com/p/selenium/wiki/AndroidDriver
1) Downloaded the android SDK for windows and unpacked and placed in the path of selenium repository
2) Set up the emulator and created the new AVD ( android virtual device )
3)Installed the webdriver apk 4)port forwarding in order to forward traffic from the host machine to the emulator.
In a terminal type:
$./adb -s forward tcp:8085 tcp:8085(since 8080 is occupied I'm using 8085)
5) This will make the android server available at //localhost:8085/wd/hub from my system.
But when i went to localhost:8085/wd/hub it displayed could not connect to www.localhost.com:8085. May I know why? Kindly help me to fix this.
When you say, "But when I went to" do you mean you visit the url in your browser? It sounds like your browser does not know what to do with the url and tries to be smart for you and assume you mean www.localhost.com:8085. If so, just add a protocol to your request. In stead of localhost:8085/wd/hub use http://localhost:8085/wd/hub.