I am new to MDX expressions and I am trying to create one that sums the value of a given measure filtered by dimensions.
In my database I have several different dimensions that have the same name: "Answer". To sum them up, I have created the query below:
WITH MEMBER Measures.Total as SUM ({[Activity].[Activity].&[14], [Activity][Activity].&[22]},
[Measures].[Activity time])
SELECT NON EMPTY [Measures].[Total] on COLUMNS from [My Analytics]
This query works, however I had to use the "&[14]" and "&[22]" statments that correspond to two different "Answer" dimensions.
Since I have more than two dimensions with the same name, is there a way to rewrite the query above in a way that I would select all these dimensions without having to add their unique ID? For example, I would re-write the query as something like this:
WITH MEMBER Measures.Total as SUM ({[Activity].[Activity].&["Answer"]},
[Measures].[Activity time])
SELECT NON EMPTY [Measures].[Total] on COLUMNS from [My Analytics]
Is this possible?
Thanks!
You can use the Filter function as following:
with
set [my-answers] as
Filter( [Activity].[Activity].members,
[Activity].[Activity].currentMember.name = 'Answer'
)
member [Measures].[Total] as Sum( [my-answers] )
...
Related
I have dimension and fact table. The dimension is PATIENTDBOID meanwhile the fact table is Total_Admissions.
Now, I want to filter for Patient that Admission >1
Can someone help me how. ?
You Can use Filter Function to Apply filter on Measures with Logical Expression.
Since I don't know Exact Dimension Name, You can try something like below.
0 - Represents COLUMNS
1 - Represents Rows
SELECT [Measures].[Total_Admissions] ON 0,
FILTER(
[Patient].[Patient].[PatientDBOID].MEMBERS
, [Measures].[Total_Admissions]>1)
ON 1
FROM [Cube Name]
I have just started to work with OLAP Cubes. I have some questions about MDX queries. I have a query like:
WITH
MEMBER [Balance].[NegEXPENSE] AS '-[Balance].[Type].[EXPENSE]'
SET BalanceTypeSet AS {[Balance].[Type].[INCOME], [Balance].[NegEXPENSE]}
MEMBER [Balance].[TypeSum] AS AGGREGATE(BalanceTypeSet)
SELECT {Measures.[Sum]} ON COLUMNS,
{[Balance].[Type].[INCOME], [Balance].[Type].[EXPENSE], [Balance].[TypeSum]} ON ROWS
FROM [Balance Cube]
The result of this query like:
RESULT
This result doesn't have a name of the last row(TypeSum). How can I add a name for TypeSum?
Thanks.
You need to add calculated dimension member, try this:
WITH
MEMBER [Balance].[Type].[TypeSum] AS AGGREGATE(BalanceTypeSet)
SELECT {[Measures].[Sum]} ON COLUMNS,
{[Balance].[Type]} ON ROWS
FROM [Balance Cube]
I need to create the table of the following structure in MDX (to be used in SSRS report):
For that I have 2 dimensions and one measure:
Option dimension, with option type and option value attributes
Standard dimension, with IsStandard flag
Price measure
In first column I need to show all option type attributes,
in second all value attributes where IsStandard flag is set to [Y],
in third values chosen by user in parameters and
in fourth prices for components selected by user.
Is it possible to do the above in single MDX? Or will I be better off creating 2 distinct queries and creating 2 tables for them?
EDIT: Since my updates won't fit into the comment, I will add some thoughts here.
EXISTS function from answer below does not filter the result set, I don't get standard values but all possible values concatenated. When I issue the following code:
SELECT
[Measures].[Price] ON 0,
NON EMPTY [Option].[Option Type].children
*
[Option].[Option Value].children ON 1
FROM [Cube]
WHERE
(
[Standard].[IsStandard].&[Y],
[Configurations].[Configuration].&[conf1]
)
It returns the default values correctly, but if I use
SELECT
[Measures].[Price] ON 0,
[Option].[Option Type].children
*
EXISTS(
[Option].[Option Value].[Option Value].members
,([Standard].[IsStandard].&[Y],[Configurations].[Configuration].&[conf1])
) ON 1
FROM [Cube]
It does not filter the results.
If you can accept a slightly different order of columns, then this can be done in MDX, using a calculated measure which is actually a string (as you want to see a list of attributes values in column). This avoids having the same attribute twice in the rows:
WITH Member Measures.[Standard Value] AS
Generate(NonEmpty([Option].[Option Type].[Option Type].Members,
{([Standard].[IsStandard].&[Y],
Measures.[Price]
)}
),
[Option].[Option value].CurrentMember.Name,
", "
)
SELECT { Measures.[Standard Value], Measures.[Price] }
ON COLUMNS,
NON EMPTY
[Option].[Option Type].[Option Type].Members
*
{ #chosenValues } // the parameters value should be a comma separated list like "[Option].[Option value].[AMD], [Option].[Option value].[INTEL]"
ON ROWS
FROM [Your Cube]
WHERE [Configurations].[Configuration].&[conf1]
You can adapt the list separator (the last argument of the Generate function) to anything you like.
And in case there is more than one measure group that is related to the dimensions [Option], [Standard], and [Configurations], you should add the name of the measure group to use for determining the relationship as additional last parameter to the Exists, so that you and not the engine determines that. Just use the name of the measure group in either single or double quotes.
Yes it is, dimension will just be ignored. This is assuming you've all in the same schema / cube.
Note, depending on the OLAP Server you're using it's possible you've to change a flag that sends an error if you're using a dimensions that is not defined at Measure Group level.
I am very new to MDX, so probably I'm missing something very simple.
In my cube, I have a dimension [Asset] and a measure [Visits], calculating (in this case) how many visits an asset has been consumed by. An important thing to note is that not every visit is associated with an asset.
What I need to find out is how many visits there are that consumed at least one asset. I wrote the following query:
SELECT
[Asset].[All] ON COLUMNS,
[Measures].[Visits] ON ROWS
FROM
[Analytics]
But this query just returns the total number of visits in the cube. I tried applying the NON EMPTY modifier to both axes, but that doesn't help.
This query should give you what you expect:
WITH MEMBER [Asset].[Asset Name].[All Assets] AS
AGGREGATE( EXCEPT( [Asset].[Asset Name].MEMBERS, { [Asset].[All] } ) )
SELECT
{ [Asset].[Asset Name].[All Assets] } ON COLUMNS,
[Measures].[Visits] ON ROWS
FROM
[Analytics]
You may need to put {[Asset].[Asset Name].[All]} as second argument of Except if the All member was not excluded.
In the query I create a calculated member [Asset].[Asset Name].[all assets] that should represent all your existing assets. I supposed that your existing assets are all the members of the level [Asset].[Asset Name] but the All member.
You can find more information about the Aggregate function here.
This works as well:
SELECT
[Measures].[Visits] ON 0
FROM
[Analytics]
WHERE
DRILLDOWNLEVEL([Asset].[All])
Update: as well as this:
SELECT
[Measures].[Visits] ON 0
FROM
[Analytics]
WHERE
[Asset].[All].CHILDREN
Say I have a measure, foo, in a cube, and I have a reporting requirement that users want to see the following measures in a report:
total foo
total foo excluding instances where foo > 10
total foo excluding instances where foo > 30
What is the best way to handle this?
In the past, I have added Named Calculations which return NULL if foo > 10 or just foo otherwise.
I feel like there has to be a way to accomplish this in MDX (something like Filter([Measures].[foo], [Measures].[foo] > 10)), but I can't for the life of me figure anything out.
Any ideas?
The trick is that you need to apply the filter on your set, not on your measure.
For example, using the usual Microsoft 'warehouse and sales' demo cube, the following MDX will display the sales for all the stores where sales were greater than $2000.
SELECT Filter([Store].[Stores].[Store].members, [Unit Sales] > 2000) ON COLUMNS,
[Unit Sales] ON ROWS
FROM [Warehouse and Sales]
I met similar problem when use saiku (backend with Mondrain), as I haven't found any clear solution of "add filter on measure", I added it here, and that may be useful for other guy.
In Saiku3.8, you could add filter on UI: "column"->"filter"->"custom", then you may see a Filter MDX Expression.
Let's suppose we want clicks in Ad greater than 1000, then add the following line there:
[Measures].[clicks] > 1000
Save and close, then that filter will be valid for find elem with clicks greater than 1000.
The MDX likes below (suppose dt as dimension and clicks as measure, we want to find dt with clicks more than 1000)
WITH
SET [~ROWS] AS
Filter({[Dt].[dt].[dt].Members}, ([Measures].[clicks] > 1000))
SELECT
NON EMPTY {[Measures].[clicks]} ON COLUMNS,
NON EMPTY [~ROWS] ON ROWS
FROM [OfflineData]
i think you have two choices:
1- Add column to your fact(or view on data source view that is based on fact table)like:
case when unit_Price>2000 then 1
else 0
end as Unit_Price_Uper_Or_Under_10
and add a fictitious Dimension based on this columns value.
and add named query for New Dimension(say Range_Dimension in datasourceview :
select 1 as range
union all
select 0 as range
and after taht you cant used this filter like other dimension and attribute.
SELECT [Store].[Stores].[Store].members ON COLUMNS,
[Unit Sales] ON ROWS
FROM [Warehouse and Sales]
WHERE [Test_Dimension].[Range].&[1]
the problem is for every range you must add When condition and only if the range is static this solution is a good solution.
and for dynamic range it's better to formulate the range (based on disceretizing method )
2- add dimension with granularity near fact table based on fact table
for example if we have fact table with primary key Sale_id.we can add
dimension based on fact table with only one column sale_Id and in dimension Usage tab
we can relate this new dimension and measure group with relation type Fact and
after that in mdx we can use something like :
filter([dim Sale].[Sale Id].[Sale Id].members,[Measures].[Unit Price]>2000)