I have data where I need to add leading zeros to it. But the problem is the data type is float. So whenever I add zeros, it automatically omits them. I have tried to add leading zero to it then try to convert it to varchar(50). But the it is giving an error:
Msg 102, Level 15, State 1, Line 1 Incorrect syntax near 'wallet_sys'.
I have used following query:
select (convert (varchar(50), ('0' + wallet_sys wallet_sys))) from NewSysData1
What have I done wrong?
PS: Some of the sample data are below: 17187383, 87339833, 93838793
I want these to be: 017187383, 087339833, 093838793
You have to add the zero after it's become a string, not before:
select '0' + convert (varchar(50), (wallet_sys)) as wallet_sys from NewSysData1
Normally, most people want to convert to having, say, a fixed width of result, with the appropriate number of leading zeros to make that happen. For that, it's a bit more work:
select RIGHT('0000000000' + convert (varchar(50), (wallet_sys wallet_sys)),10) as wallet_sys
from NewSysData1
Will produce 10 digits, with as many leading zeroes as needed (The number of zeroes in the string literal should be ~equal to the number of desired digits, and this is also the 10 provided at the right hand end of the first line)
Related
I have a column (RCV1.ECCValue) in a table which 99% of the time has a constant string format- example being:
T0-11.86-273
the middle part of the two hyphens is a percentage. I'm using the below sql to obtain this figure which is working fine and returns 11.86 on the above example. when the data in that table is in above format
'Percentage' = round(SUBSTRING(RCV1.ECCValue,CHARINDEX('-',RCV1.ECCValue)+1, CHARINDEX('-',RCV1.ECCValue,CHARINDEX('-',RCV1.ECCValue)+1) -CHARINDEX('-',RCV1.ECCValue)-1),2) ,
However...this table is updated from an external source and very occasionally the separators differ, for example:
T0-11.86_273
when this occurs I get the error:
Invalid length parameter passed to the LEFT or SUBSTRING function.
I'm very new to SQL and have got myself out of many challenges but this one has got me stuck. Any help would be mostly appreciated. Is there a better way to extract this percentage value?
Replace '_' with '-' to string in CHARINDEX while specifying length to the substring
'Percentage' = round(SUBSTRING(RCV1.ECCValue,CHARINDEX('-',RCV1.ECCValue)+1, CHARINDEX('-',replace(RCV1.ECCValue,'_','-'),CHARINDEX('-',RCV1.ECCValue)+1) -CHARINDEX('-',RCV1.ECCValue)-1),2) ,
If you can guarantee the structure of these strings, you can try parsename
select round(parsename(translate(replace('T0-11.86_273','.',''),'-_','..'),2), 2)/100
Breakdown of steps
Replace . character in the percentage value with empty string using replace.
Replace - or _, whichever is present, with . using translate.
Parse the second element using parsename.
Round it up to 2 digits, which will also
automatically cast it to the desired numeric type.
Divide by 100
to restore the number as percentage.
Documentation & Gotchas
Use NULLIF to null out such values
round(
SUBSTRING(
RCV1.ECCValue,
NULLIF(CHARINDEX('-', RCV1.ECCValue), 0) + 1,
NULLIF(CHARINDEX('-',
RCV1.ECCValue,
NULLIF(CHARINDEX('-', RCV1.ECCValue), 0) + 1
), 0)
- NULLIF(CHARINDEX('-', RCV1.ECCValue), 0) - 1
),
2)
I strongly recommend that you place the repeated values in CROSS APPLY (VALUES to avoid having to repeat yourself. And do use whitespace, it's free.
I wanted to double check my logic for a query in SQL Server.
The idea is that I am able to feed the following values and it will make sure the result is a decimal with four trailing digits.
Possible values for #LABORQTY:
1,200
1,200.42
1200 (Integer)
1200.42
1200 (As a String)
1200.42 (As a String)
When the value is a string, it will give the error:
Error converting data type nvarchar to numeric.
Here is my code:
CONVERT(DECIMAL(12, 4), REPLACE(#LABORQTY, ',', ''))
The output each time though should be decimal:
1200.4200
Your question is really confused, but I'll answer according to the following parameters:
#laborqty is a VARCHAR
#laborqty may somehow come to contain any of the following values:
'1200'
'1200.42'
'1,200'
'1,200.42'
In which case CONVERT(DECIMAL(12, 4), REPLACE(#LABORQTY, ',', '')) will indeed produce a decimal with up to 4 digits of fractional precision. Whether your query tool/programming language will output it as 1200.4200 or not is another matter entirely; it might well just output 1200.42 and drop the trailing zeroes
If you're getting Error converting data type varchar to numeric. still, there is some other character data (not comma) in your numeric string
If you definitely want the trailing zeroes, format it into a string before you output
FORMAT(CONVERT(decimal(12,4), '1200.42'), '0.0000')
This will generate a string with 4 trailing zeroes
you can use :
select CAST ( REPLACE( '1,200.4' , ',','') AS decimal(17,4))
I did not expect this to be a problem, but I'm struggling to return the first 3 numbers, including the 0's before them. In the below examples, I show a few things I've tried. I want it to return '001'. It either returns '118' or an error. It seems like every solution wants to convert them to a text, which will drop the 0's.
SELECT lpad(00118458582::text, 3, '0')
returns 118
SELECT lpad(00118458582, 3, '0')
ERROR: function lpad(integer, integer, unknown) does not exist
SELECT left(00118458582::text, 3)
returns 118
SELECT left(00118458582, 3)
ERROR: function left(integer, integer) does not exist
SELECT substring(00118458582::text, 1, 3)
returns 118
Can I get any help please? Thanks!
Your problem starts before you try to get the first 3 digits, namely that you're considering 00118458582 to be a valid INTEGER (or whatever numeric type). I mean, it's not invalid, but what happens when you run SELECT 00118458582::INTEGER? You get 118458582. Because leading zeros in those types are senseless. So you'll never have a situation as in your examples (outside of a hardcoded number with leading zeros in your query window) in your tables, because those zeros wouldn't be stored in your number-based data type fields.
So the only way to get that sort of situation is when they're string-based: SELECT '00118458582'::TEXT returns 00118458582. And at that point you can run your preferred function to get the first 3 characters, e.g. SELECT LEFT('00118458582', 3) which returns 001. But if you're planning on casting that to INTEGER or something, forget about leading zeros.
SELECT substring(00118458582::text, 1, 3)
returns 118 because it is a number 118458582 (the leading zeros are automatically dropped), that is converted to text '118458582' and it then takes the first 3 characters.
If you are trying to take the first three digits and then convert to a number you can use try:
select substring('00118458582', 1,3::numeric)
it might actually be:
select substring('00118458582', 1,3)::numeric
I don't have a way to test right now...
lpad() refers to the total length of the returned value. So I think you want:
select lpad(00118458582::text, 12, '0'::text)
If you always want exactly 3 zeros before, then just concatenate them:
select '000' || 00118458582::text
SELECT logicalTime, traceValue, unitType, entName
FROM vwSimProjAgentTrace
WHERE valueType = 10
AND agentName ='AtisMesafesi'
AND ( entName = 'Hawk-1')
AND simName IN ('TipSenaryo1_0')
AND logicalTime IN (
SELECT logicalTime
FROM vwSimProjAgentTrace
WHERE valueType = 10 AND agentName ='AtisIrtifasi'
AND ( entName = 'Hawk-1')
AND simName IN ('TipSenaryo1_0')
AND CONVERT(FLOAT , traceValue) > 123
) ORDER BY simName, logicalTime
This is my sql command and table is a view table...
each time i put "convert(float...) part " i get
Msg 8114, Level 16, State 5, Line 1
Error converting data type nvarchar to float.
this error...
One (or more) of the rows has data in the traceValue field that cannot be converted to a float.
Make sure you've used the right combination of dots and commas to signal floating point values, as well as making sure you don't have pure invalid data (text for instance) in that field.
You can try this SQL to find the invalid rows, but there might be cases it won't handle:
SELECT * FROM vwSimProjAgentTrace WHERE NOT ISNUMERIC(traceValue)
You can find the documentation of ISNUMERIC here.
If you look in BoL (books online) at the convert command, you see that a nvarchar conversion to float is an implicit conversion. This means that only "float"-able values can be converted into a float. So, every numeric value (that is within the float range) can be converted. A non-numeric value can not be converted, which is quite logical.
Probably you have some non numeric values in your column. You might see them when you run your query without the convert. Look for something like comma vs dot. In a test scenario a comma instead of a dot gave me some problems.
For an example of isnumeric, look at this sqlfiddle
Searched and searched on SO and can't figure it out
Tried CASTING each field as FLOAT to no avail, convert didn't get me any further
How can I get the below case clause to return the value stated in the THEN section?
Error:
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to float.
section of my SQL query that makes it error:
When cust_trendd_w_costsv.terms_code like '%[%]%' and (prod.dbo.BTYS2012.average_days_pay) - (substring(cust_trendd_w_costsv.terms_code,3,2)) <= 5 THEN prod.dbo.cust_trendd_w_costsv.terms_code
average_days_pay = float
terms_code = char
Cheers!
Try to use ISNUMERIC to handle strings which can't be converted:
When cust_trendd_w_costsv.terms_code like '%[%]%'
and (prod.dbo.BTYS2012.average_days_pay) -
(case when isnumeric(substring(cust_trendd_w_costsv.terms_code,3,2))=1
then cast(substring(cust_trendd_w_costsv.terms_code,3,2) as float)
else 0
end)
<= 5 THEN prod.dbo.cust_trendd_w_costsv.terms_code
The issue that you're having is that you're specifically searching for strings that contain a % character, and then converting them (implicitly or explicitly) to float.
But strings containing % signs can't be converted to float whilst they still have a % in them. This also produces an error:
select CONVERT(float,'12.5%')
If you're wanting to convert to float, you'll need to remove the % sign first, something like:
CONVERT(float,REPLACE(terms_code,'%',''))
will just eliminate it. I'm not sure if there are any other characters in your terms_code column that may also trip it up.
You also need to be aware that SQL Server can quite aggressively re-order operations and so may attempt the above conversion on other strings in terms_code, even those not containing %. If that's the source of your error, then you need to prevent this aggressive re-ordering. Provided there are no aggregates involved, a CASE expression can usually avoid the worst of the issues - make sure that all strings that you don't want to deal with are eliminated by earlier WHEN clauses before you attempt your conversion
If your are sure that Substring Part returns a numeric value, You can Cast The substring(....) to Float :
.....and (prod.dbo.BTYS2012.average_days_pay) - (CAST(substring(cust_trendd_w_costsv.terms_code,3,2)) as float ) <= 5 ....