I'm at a total loss. We have TeamCity installed (TeamCity Professional 2017.2.3 (build 51047)). We run the MSBuild step with:
MSBuildVersion: Microsoft Build Tools 2017
MSBuild Tools Version:
15.0
and Command Parameters:
/t:Clean /p:DeployOnBuild=true /t:build /t:publish /p:PublishProfile=Properties\PublishProfiles\Deploy.pubxml /p:PublishDirectory=Deployment /p:Configuration=Release /p:VisualStudioVersion=15.0
When we run the build t shows:
_DeploymentUnpublishable [11:16:53][_DeploymentUnpublishable] Skipping unpublishable project.
TeamCity outputs at the start:
Starting:
C:\TeamCity\buildAgent\plugins\dotnetPlugin\bin\JetBrains.BuildServer.MsBuildBootstrap.exe
/workdir:C:\TeamCity\buildAgent\work\c36dd5b119aec7b
"/msbuildPath:C:\Program Files (x86)\Microsoft Visual
Studio\2017\BuildTools\MSBuild\15.0\bin\MSBuild.exe"
If I navigate to the msbuildPath in the CommandLine and run the same command it builds and publishes without issue.
Any help would be greatly appreciated.
MSBuild Step In TeamCity:
I had this issue and resolved it by setting a Parameter towards the publishing profile.
This is what i had:
- *.csproj would build and publish in visual studio locally.
- TeamCity builds fine but when asked to Publish sends me the not helpful _deploymentunpublishable
I tried all the commands in the msbuild line but only the following setup works:
pre-step: Create a Publishing profile (*.pubxml) which outputs to a folder within your build. This should be saved in your /Properties folder of the build.
inside your configuration page, go to Parameters.
Add a new Parameter for "System". Call it PublishProfile (system.PublishProfile). Give it a vaule which is the name of your publish profile file or *.pubxml
enter image description here
create a new step (or amend existing publish step), runner type "MSBuild" and in the Targets box type WebPublish
enter image description here
You dont need any command line parameters as your pubxml will handle all this.
Thats it, give it a try and your code should now publish to the folder you set in the publishing profile.
notes:
Visual Studio 2017 solution with an MVC web app and several other projects, not all of which are referenced by the web app project. Until now Ive been using VS directly to publish to a test server, but I have moved things into VSTS and have a build & release definition setup but not working yet.
What im trying to achieve, is to get my (hosted) VSTS build agent to produce the published files that my (on-prem) release agent can simply copy to its target destination. So, Im trying to test the MS build step locally from the VS command line so as to get the files produced and note the path they are at. Maybe Im making this more complicated that it needs to be?
These options will create a single zipped archive and its associated files and place it into the artefact staging dir. Is there a way to simply publish the files WITHOUT putting them in an archive - and directly into the artefact staging dir?
Visual Studio Build
MSBuild parameters
/t:My_MVCWeb_Project_Name /p:DeployOnBuild=true
/p:WebPublishMethod=FileSystem /p:PackageAsSingleFile=true
/p:SkipInvalidConfigurations=true
/p:PackageLocation="$(build.artifactstagingdirectory)\\"
In my release using on-prem agent),
I have a "copy files" task, with the destination as the unc path where the IIS app is located. However, that will just copy over the archive. So how can I just copy the files as if I was using a publish profile, straight to the app directory?
[update2 - still getting zip file produced ]
MSBuild my_solution_name /t:"my_project_name" /p:DeployOnBuild=true /p:WebPublishMethod=FileSystem /p:SkipInvalidConfigurations=true /p:PackageLocation="D:\temp\local-dev-build-dir"
[ update 3 ]
Trying these from the command line as a test, but nothing is generated
msbuild D:\app_dir>MSBuild my_solution_name.sln /t:"my_web_proj_name" /p:SkipInvalidConfigurations=true /p:DeployOnBuild=true /p:WebPublishMethod=FileSystem /p:publishUrl="D:\temp\app_build_dir\\"
/p:DeployDefaultTarget=WebPublish
Using these MSBuild Arguments instead:
/p:SkipInvalidConfigurations=true /p:DeployOnBuild=true /p:WebPublishMethod=FileSystem /p:publishUrl="$(build.artifactstagingdirectory)\\" /p:DeployDefaultTarget=WebPublish
Remove the
/p:PackageAsSingleFile=true
Or change it to:
/p:PackageAsSingleFile=false
That is causing the files to be zipped up.
You may also need to switch the publishing method to package:
/p:OutDir=$(build.artifactstagingdirectory)
/p:WebPublishMethod=Package
Now I can able to build successfuly, artifacts created under obj/Debug/package/packageTmp/
can you please let me know how to publish into some other directory in same machine .
Command:
MSBuild.exe C:\RD\DigitalTechnology\Trunk\SQLDeployment\SQLDeployment.sln /p:VisualStudioVersion=14.0 /p:DeployOnBuild=true
For a .Net application you can use:
/p:OutDir=c:\My\BuildDropLocation\ProjectName
For a web project you have to use this statement:
/p:DeployOnBuild=true
/p:DeployDefaultTarget=WebPublish
/p:WebPublishMethod=FileSystem
/p:DeleteExistingFiles=true
/p:publishUrl=c:\My\BuildDropLocation\ProjectName
Today I use msbuild to deploy a web application to an iis server. How can I do the same with msdeploy (command line)?
MSBuild.exe myproject.csproj
/P:VisualStudioVersion=11.0
/P:Password=pass
/P:AllowUntrustedCertificate=true
/P:DeployOnBuild=True
/P:PublishProfile=deploytest
/P:DeployIISAppPath="Default Web site"
/P:MsDeployServiceUrl=my.server.com
/P:Configuration=Release
It depends what you would like your workflow to be, if you want to package the output and deploy that seperately then you'll need to create a zip file from your build.
Create Package
Add the following to your msbuild command line to create a package:
/p:DeployTarget=Package
/p:PackageLocation=MyProject.zip
/p:CreatePackageOnPublish=True
Deploy Package
msdeploy.exe
-verb:sync
-source:Package=MyProject.Zip
-destination:auto:ComputerName="my.server.com"
You might also want to promote from one deployed site to another.
Clone Site
msdeploy.exe
-verb:sync
-source:appHostConfig="my.server.com"
-dest:appHostConfig="mynew.server.com"
Or you may already have a site that you want to target.
Clone Application
msdeploy.exe
-verb:sync
-source:iisApp="my.server.com/MyApp"
-dest:iisApp="my.server.com/MyNewApp"
I am trying to use MSDeploy to deploy an MVC project to the server using TeamCity. When I do this on my computer in powershell, using the following command:
msbuild.exe .\mvc.csproj /p:PublishProfile=DevServer /p:VisualStudioVersion=11.0
/p:DeployOnBuild=True /p:Password=MyPassword /p:AllowUntrustedCertificate=true
It builds the project and deploys it to the server (info defined in the DevServer publish profile) perfectly. The output shows an MSDeployPublish section at the end, in which I see text like Starting Web deployment task from source... and then with rows telling me what files are updated, etc.
When I run this on TeamCity, using an MSBuild Build step, on the same file, with the same parameters (from the same working directory) it builds the project but does not publish it. Instead it has the regular output from a build process (CoreCompile, _CopyFilesMarkedCopyLocal, GetCopyToOutputDirectoryItems, CopyFilesToOutputDirectory) but then does not actually go and publish anything.
What changes to I need to make to the setup in TeamCity to get it to publish deploy in the same way that it works using MSBuild from my computer?
(TeamCity 7.1, MSBuild 4.0, WebDeploy 3.0, Visual Studio 12, IIS 7. Related to my previous question)
We do our WebDeploys with a TeamCity MSBuild step configured as follows:
Build File Path: Server.csproj
Command Line Parameters:
/p:Configuration=%configuration%
/p:DeployOnBuild=True
/p:DeployTarget=MSDeployPublish
/p:MsDeployServiceUrl=https://%web.deploy.server%:8172/MsDeploy.axd
/p:DeployIisAppPath=%web.deploy.site%
/p:AllowUntrustedCertificate=True
/p:Username=
/p:AuthType=NTLM
We use integrated authentication; change as necessary to fit your scheme. The value of this, I think, is that it builds everything from scratch and doesn't rely on a pre-built package. From the gist you posted I noticed that you do some DB publishing, we don't use WebDeploy for that so I can't offer any guidance there. Hope this helps.
I use MSBuild.exe to package to zip, and MSdeploy.exe to deploy in separate steps.
To deploy the package.zip file on the command line:
"C:\Program Files\IIS\Microsoft Web Deploy V2\msdeploy.exe" -verb:sync
-source:package="C:\Build\MyAppName.Debug.zip"
-dest:auto,wmsvc=webservername,username=webdeploy,password=*******
-allowUntrusted=true
This command is also worth explaining in detail:
-verb:sync : makes the web site sync from the source to the destination
-source:package="C:\Build\MyAppName.Debug.zip" : source is an MSBuild zip file package
-dest:auto,wmsvc=webservername : use the settings in the package file to deploy to the server. The user account is an OS-level account with permission. The hostname is specified, but not the IIS web site name (which is previously specified in the MSBuild project file in the project properties).
You can modify parameters based on your configuration. I like it this way because with separate steps, its easier to debug problems.
Use TeamCity build step and the command line runner.
Update:
If you want an example of how to build the ZIP package using MSBuild, try something like this:
"C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe"
MyWebApp/MyWebApp/MyWebApp.csproj
/T:Package
/P:Configuration=Debug;PackageLocation="C:\Build\MyWebApp.Debug.zip"
This should work the same on your local PC as well as on the CI server.
Here are the config settings that finally worked for me:
/p:Configuration=CONFIG-NAME
/p:DeployOnBuild=True
/p:DeployTarget=MSDeployPublish
/p:MsDeployServiceUrl=http://SITE-URL/MsDeployAgentService
/p:username="USERNAME"
/p:password=PASSWORD
/p:AllowUntrustedCertificate=True
/P:CreatePackageOnPublish=True
/p:DeployIisAppPath=SITE-URL
/p:MSDeployPublishMethod=RemoteAgent
/p:IgnoreDeployManagedRuntimeVersion=True
I had exactly the same issue! I've posted the solution I used over at: MsBuild not finding publish profile
Basics were:
Install the Azure SDK 1.8 on the build server
Force the /P:PublishProfileRootFolder value to ensure MSBuild can locate the publish profile
Ensure that you have the Microsoft Web Developer Tools feature installed for Visual Studio. This was missing on my build agent but once I added it the TeamCity build worked just fine.
This can happen when the build target paths are missing from your MSBuild directory. Instead of trying to get those to line up on every developer machine, install the targets from the Nuget. That way it will always be the same for everyone, regardless of how their machine is setup.