I just installed XAMPP on my personal CentOS box and when I try to disable Directory Listing I get an Apache error when restarting. My httpd.conf file looks like this after I make the changes:
httpd.conf
Alias /bitnami/ "/opt/lampp/apache2/htdocs/"
Alias /bitnami "/opt/lampp/apache2/htdocs"
<Directory "/opt/lampp/apache2/htdocs">
Options -Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Error
XAMPP: Starting Apache...fail.
AH00526: Syntax error on line 5 of /opt/lampp/apache2/conf/httpd.conf:
Either all Options must start with + or -, or no Option may.
I have tried removing Indexes all together and I can still see my directories. Maybe I'm in the wrong file, but from what I've read disabling directory listing has to be made here or .htacces (which I am trying to avoid.) In case it comes up I have made sure to restart XAMPP every time I made changes.
The error message is pretty clear. To rephrase / show examples:
# relative to whatever lower precedence section applies
Options -Indexes
If your goal is to turn off indexes. If you want to make sure FollowSymlinks is also set, put a + in front of it:
# relative to whatever lower precedence section applies
Options -Indexes +FollowSymlinks
If you want to turn everything but FollowSymlinks off:
# not relative
Options FollowSymlinks
Please go to file: /opt/lampp/etc/httpd.conf
and either comment the line like this:
#Options Indexes FollowSymLinks Includes ExecCGI
or edit like this
Options -Index
For Windows machine: Do same editing in file /apache/conf/httpd.conf
I put a "+" in front of word "FollowSymlinks" to have success.
And replace this lines:
AllowOverride All
Order allow,deny
To:
Require all granted
I hope to help you!
You can also use:
sudo a2dismod autoindex
Related
I'm exposing files using Apache's httpd <Directory> as below
Alias /getfiles "/web/playbooks/tmpfiles"
<Directory "/web/playbooks/tmpfiles">
Options Indexes MultiViews
AllowOverride None
Require all granted
</Directory>
With this I'm able to access all files/folder inside /web/playbooks/tmpfiles through web browser URL like the below.
http://<server>:<port>/getfiles/<anyfile.txt>
Is it possible to refresh the above URL so I could see latest changes to files/folder inside /web/playbooks/tmpfiles periodically?
Any solution would be great.
You could try to make the client autorefresh by itself through instructions in the html itself instead of trying to do something weird which is not probably in the http spec. (I might be wrong).
For example, according to your directory entry, load module_autoindex module and then use this config:
<Directory /web/playbooks/tmpfiles>
Options Indexes MultiViews
IndexOptions FancyIndexing
IndexHeadInsert "<meta http-equiv=\"refresh\" content=\"10\">"
AllowOverride None
Require all granted
</Directory>
This way Apache httpd will add that tag in the html and the client will know it has to autorefresh the page each 10 seconds. Generally it is not recommended to set this too low, so perhaps 10 seconds and above is alright for you.
I am having an Amazon EC2 Instance, I have enable the mod_rewrite but htacess not working.
Also while changing /etc/apache2/sites-available/default setting AllowOverride none to AllowOverride All it is giving me internal server error.
Am I missing something.
internal server error.
Means there is something wrong with the .htaccess file likely
Check /var/log/httpd/error.log it may give you the line. but it will tell you whats wrong
Here is what I try and that work for me
Open file as
sudo vim /etc/apache2/apache2.conf
Second
remove comment sign (#)
AccessFileName .htaccess
Then find the line where there is
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverrideNone
Require all granted
</Directory>
replace "None" with "All"
AllowOverride All
I found this on https://webmasters.stackexchange.com/questions/61009/how-to-enable-use-of-htaccess-in-apache-on-ubuntu/61022#61022
Suppose It's showing some Internal Server Error First, you activate ModRewrite feature:
sudo a2enmod rewrite
sudo /etc/init.d/apache2 restart
I want to set the AllowOverride all But I don't know how to do it. I have found the following code by searching the google and pasted it in .htaccess:
<Directory>
AllowOverride All
</Directory>
But after pasting it I started receiving "Internal Server Error"
Can anyone guide me where to put this code or how to do it?
In case you are on Ubuntu, edit the file /etc/apache2/apache2.conf (here we have an example of /var/www):
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
and change it to;
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
then,
sudo service apache2 restart
You may need to also do sudo a2enmod rewrite to enable module rewrite.
The main goal of AllowOverride is for the manager of main configuration files of apache (the one found in /etc/apache2/ mainly) to decide which part of the configuration may be dynamically altered on a per-path basis by applications.
If you are not the administrator of the server, you depend on the AllowOverride Level that theses admins allows for you. So that they can prevent you to alter some important security settings;
If you are the master apache configuration manager you should always use AllowOverride None and transfer all google_based example you find, based on .htaccess files to Directory sections on the main configuration files. As a .htaccess content for a .htaccess file in /my/path/to/a/directory is the same as a <Directory /my/path/to/a/directory> instruction, except that the .htaccess dynamic per-HTTP-request configuration alteration is something slowing down your web server. Always prefer a static configuration without .htaccess checks (and you will also avoid security attacks by .htaccess alterations).
By the way in your example you use <Directory> and this will always be wrong, Directory instructions are always containing a path, like <Directory /> or <Directory C:> or <Directory /my/path/to/a/directory>. And of course this cannot be put in a .htaccess as a .htaccess is like a Directory instruction but in a file present in this directory. Of course you cannot alter AllowOverride in a .htaccess as this instruction is managing the security level of .htaccess files.
Goto your_severpath/apache_ver/conf/
Open the file httpd.conf in Notepad.
Find this line:
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
Remove the hash symbol:
LoadModule vhost_alias_module modules/mod_vhost_alias.so
Then goto <Directory />
and change to:
<Directory />
Options FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Then restart your local server.
On Linux, in order to relax access to the document root, you should edit the following file:
/etc/httpd/conf/httpd.conf
And depending on what directory level you want to relax access to, you have to change the directive
AllowOverride None
to
AllowOverride All
So, assuming you want to allow access to files on the /var/www/html directory, you should change the following lines from:
<Directory "/var/www/html">
AllowOverride None
</Directory>
to
<Directory "/var/www/html">
AllowOverride All
</Directory>
If you are using Linux you may edit the code in the directory of
/etc/httpd/conf/httpd.conf
now, here find the code line kinda like
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
Change the AllowOveride None to AllowOveride All
Now now you can set any kind of rule in your .httacess file inside your directories
if any other operating system just try to find the file of httpd.conf and edit it.
As other users explained here about the usage of allowoveride directive, which is used to give permission to .htaccess usage. one thing I want to point out that never use allowoverride all if other users have access to write .htaccess instead use allowoveride as to permit certain modules.
Such as AllowOverride AuthConfig mod_rewrite Instead of
AllowOverride All
Because module like mod_mime can render your server side files as plain text.
enter code hereif you are using linux you have to edit the
`/etc/apache2/sites-available/000-default.conf`
under the Documentroot . add the following code
`<Directory /var/www/>
AllowOverride all
Require all granted
</Directory>`
then ,
`sudo service apache2 restart`
and you have to enable the apache mod rewrite
`sudo a2enmod rewrite`
I think you want to set it in your httpd.conf file instead of the .htaccess file.
I am not sure what OS you use, but this link for Ubuntu might give you some pointers on what to do.
https://help.ubuntu.com/community/EnablingUseOfApacheHtaccessFiles
I also meet this problem, and I found the solution as 2 step below:
1. In sites-enabled folder of apache2, you edit in Directory element by set "AllowOverride all" (should be "all" not "none")
2. In kohana project in www folder, rename "example.htaccess" to ".htaccess"
I did it on ubuntu. Hope that it will help you.
There are several answers but there a number of things wrong with this question and I would like to address these:
If you get an error (e.g. 500), look in the log files (if you have access to them). e.g. /var/log/apache2/ssl_error.log
e.g.
cat /var/log/apache2/ssl_error.log
[Tue Jun 01 19:05:34 2021] [alert] [pid 31154] config.c(2119):
[client *******] /var/www/mysite/public/tmp/.htaccess:
<Directory not allowed here [lid YLZo3quRlv2EKOAABVoFLwAAAIM]
Putting AllowOverrides in a .htaccess makes no sense and is not allowed. See Context. See also my explanation below. It should be defined in the Apache configuration (e.g. /etc/apache2)
Allowing everything is usually not the best idea. Be as restrictive as possible!
the Directory directive is missing a directory, should be e.g. <Directory /var/www/html/etc>
the Directory directive does not make sense in an .htaccess. The location of the .htaccess in a directory already has the effect of making the statements within apply to a specific directory
do not mix and match snippets that are intended to be put in the Apache configuration (e.g. in /etc/apache2/...) with statements that are intended to be put in .htaccess - though most of the time, they will be identical, there are some subtle differences
If you have the possibility to modify the Apache configuration directly, do not use .htaccess and deactivate it. (for performance reasons, among others. Also you can have all configuration in one place, put it in version control or manage it via a software configuration management tool, e.g. Puppet, Ansible, SaltStack)
Unless you really cannot access and modify the Apache configuration directly, you do not need .htaccess. This is a common misconception.
That you saw a 500 error proves my point. If you change configuration in the Apache configuration directly (and not in .htaccess), you will usually get an error message with an explanation and information about the error and the line number (e.g. when you do service apache2 reload or apachectl configtest) - which gives you the possibility to fix the error before applying this in production(!).
Also, look in the documentation. It is really quite good. For most directives, you can find where they apply (see "Context").
For example, for IfModule, you can see:
Context: server config, virtual host, directory, .htaccess
For, AllowOverrides it is:
Context: directory
Note the missing .htaccess in the Context!
Instead of googling for information which repeat the same mistakes over and over, look in the documentation!
Docs
AllowOverrides
https://www.danielmorell.com/guides/htaccess-seo/basics/dont-use-htaccess-unless-you-must
SuSE Linux Enterprise Server
Make sure you are editing the right file
https://www.suse.com/documentation/sles11/book_sle_admin/data/sec_apache2_configuration.html
httpd.conf
The main Apache server configuration file. Avoid changing this file. It primarily contains include statements and global settings. Overwrite global settings in the pertinent configuration files listed here. Change host-specific settings (such as document root) in your virtual host configuration.
In such case vhosts.d/*.conf must be edited
Plus those upvoted correct answers sometimes same error could be seen because of mismatched and different settings on SSL part of webserver configurations. (Obviously when not using .htaccess file).
Been trying to change the /usr/local/apache/conf/includes/pre_virtualhost_global.conf to make all instances of "FollowSymLinks" in .htaccess require to be changed to "SymLinksIfOwnerMatch".
<Directory "/home">
Options +All +ExecCGI -FollowSymLinks +Includes +IncludesNOEXEC -Indexes -MultiViews +SymLinksIfOwnerMatch
AllowOverride All Options=ExecCGI,Includes,IncludesNOEXEC,Indexes,MultiViews,SymLinksIfOwnerMatch
</Directory>
However after using /scripts/rebuildhttpdconf I get the following error;
AH00526: Syntax error on line 2 of /usr/local/apache/conf/includes/pre_virtualhost_global.conf:
You may not use 'Options +All' or 'Options -All'.
Can anyone help me with this? I'm sure that should of worked and have no idea why Options +All cannot be used.
I'm using Apache Version: 2.4.4
Thanks
see http://httpd.apache.org/docs/2.4/mod/core.html#options
"Mixing Options with a + or - with those without is not valid syntax..."
But what is not explicitly specified in this documentation is the use of 'All' would seem to logically make the rest of the options redundant. The fact that there is a 'None' option seems to me to indicate that the 'None' option logically replaces a '-All'.
I want to disable directory browsing of /galerias folder and all subdirectories
Index of /galerias/409
* Parent Directory
* i1269372986681.jpg
* i1269372986682.jpg
* i1269372988680.jpg
Create an .htaccess file containing the following line:
Options -Indexes
That is one option. Another option is editing your apache configuration file.
In order to do so, you first need to open it with the command:
vim /etc/httpd/conf/httpd.conf
Then find the line: Options Indexes FollowSymLinks
Change that line to: Options FollowSymLinks
Lastly save and exit the file, and restart apache server with this command:
sudo service httpd restart
(You have a guide with screenshots here.)
The best way to do this is disable it with webserver apache2. In my Ubuntu 14.X - open /etc/apache2/apache2.conf change from
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
to
<Directory /var/www/>
Options FollowSymLinks
AllowOverride None
Require all granted
</Directory>
then restart apache by:
sudo service apache2 reload
This will disable directory listing from all folder that apache2 serves.
Apart from the aformentioned two methods (edit /etc/apache2/apache2.conf or add Options -Indexes in .htaccess file), here is another one
a2dismod autoindex
Restart the apache2 server afterwards
sudo service apache2 restart
Edit/Create an .htaccess file inside /galerias with this:
Options -Indexes
Directory browsing is provided by the mod_autoindex module.
You can place an empty file called index.html into each directory that you don't want listed. This has several advantages:
It (usually) requires zero configuration on the server.
It will keep working, even if the server administrator decides to use "AllowOverride None" in the the server configuration. (If you use .htaccess files, this can lead to lots of "Error 500 - internal server error" messages for your users!).
It also allows you to move your files from one server to the next, again without having to mess with the apache configuration.
Theoretically, the autoindexing might be triggered by a different file (this is controlled by the DirectoryIndex option), but I have yet to encounter this in the real world.
One of the important thing is on setting a secure apache web server is to disable directory browsing. By default apache comes with this feature enabled but it is always a good idea to get it disabled unless you really need it.
Open httpd.conf file in apache folder and find the line that looks as follows:
Options Includes Indexes FollowSymLinks MultiViews
then remove word Indexes and save the file. Restart apache. That's it
If you choose to modify your httpd.conf file to solve this and you have multiple Options directives, then you must add a - or a + before each directive. Example:
Options -Indexes +FollowSymLinks
This is not an answer, just my experience:
On my Ubuntu 12.04 apache2, didn't find Indexes in either apache2.conf or httpd.conf, luckily I found it in sites-available/default. After removing it, now it doesn't see directory listing. May have to do it for sites-available/default-ssl.
To complete #GauravKachhadiya's answer :
IndexIgnore *.jpg
means "hide only .jpg extension files from indexing.
IndexIgnore directive uses wildcard expression to match against directories and files.
a star character , it matches any charactes in a string ,eg : foo or foo.extension, in the following example, we are going to turn off the directory listing, no files or dirs will appear in the index :
IndexIgnore *
Or if you want to hide spacific files , in the directory listing, then we can use
IndexIgnore *.php
*.php => matches a string that starts with any char and ends with .php
The example above hides all files that end with .php
Open Your .htaccess file and enter the following code in
Options -Indexes
Make sure you hit the ENTER key (or RETURN key if you use a Mac) after entering the "Options -Indexes" words so that the file ends with a blank line.
Add this in your .htaccess file:
Options -Indexes
If it is not work for any reason, try this within your .htaccess file:
IndexIgnore *
Try this in .htaccess:
IndexIgnore *.jpg
In Directory Section ( /etc/httpd/httpd.conf)
Remove Line - Options Indexes FollowSymLinks
New Line - Options FollowSymLinks
I found another way of doing this with virtual hosts:
<VirtualHost *:80>
DocumentRoot C:/WAMP/Apache24/htdocs/
ServerName vehiclesspares.com
<Directory C:/WAMP/Apache24/htdocs/vehiclesspares.com>
Options FollowSymLinks
AllowOverride None
Require all granted
</Directory>
</VirtualHost>
This worked for me on Apache 2.4.54 on my local windows machine with the host file (C:\Windows\System32\drivers\etc\hosts) containing the line:
127.0.0.1 vehiclesspares.com
This configuration also had vehiclesspares.com under the docroot: C:\WAMP\Apache24\htdocs\vehiclesspares.com