Wcf extension is working fine on local iis. however,when i deployed it on windows server 2008, I got the following errors.
An error occurred creating the configuration section handler for system.serviceModel/behaviors: Extension element 'ErrorHandlerExtension' cannot be added to this element. Verify that the extension is registered in the extension collection at system.serviceModel/extensions/behaviorExtensions.
I left a space after each comma, but it did not work.
Pls give me some insight.
In general this could be caused by one of the following problems:
A difference in the configuration file between local iis and server
The dll containing the extension was not deployed to the server
The rights of the identity of the app pool on the server are limited
the solution for this case that I have solved : microsoft netframework version compatible. when I was installed the netframework 4.5 the problem has solved.
Related
I have a ASP.NET Core with Blazor website and I want to deploy it to Arvixe host. The website is very simple and contains only UI elements no database required. I published the website to a local file system and uploaded it using FTP to the Plesk.
When I am visiting the website, I receive this error:
500 - Internal server error. There is a problem with the resource you
are looking for, and it cannot be displayed.
I have tried to run it on the IIS and I received more details:
Configuration The configuration file cannot be read due to
insufficient permissions.
I tried to add IIS_IUSRS to the group and users for web.config but I am not able to find it because I am using a windows 10 connected to active directory.
Besides, I still don't know how to solve this problem at Arvixe. Does anyone know tips might help?
500 internal error is generic issue. Please kindly check the error message on the server and paste it here. Make sure that your provider has installed .net core bundled on their server and here are tutorial about publsih .net core using plesk https://windowswebhostingreview.com/how-to-publish-using-web-deploy-with-plesk-control-panel/. It should be working fine.
You need to give Full Trust permission (Read-Write-Execute) to your application folder and also to Application Pool and also check if the Runtime version supported by Arvixe matches with your Asp.net Core version.
Also enable the logs in web.config file by setting stdoutLogEnabled="true" to get detailed error so that you can investigate more about the error.
I am attempting to run the default ASP.NET Core Web Application (Web Application Template in VS 2015) via IIS.
I have followed the instructions from the docs here eg setting up a 'No Managed Code' application pool and pointing the Physical Path at the location of the web.config file.
When I attempt to browse to the website root, http://localhost I am getting this error:
HTTP Error 502.3 - Bad Gateway There was a connection error while trying to route the request.
Most likely causes: The CGI application did not return a valid set of
HTTP errors. A server acting as a proxy or gateway was unable to
process the request due to an error in a parent gateway.
The event viewer states:
Failed to start process with commandline 'dotnet ./bin/Debug/netcoreapp1.0/WebApplication2.dll', Error Code = '0x80004005'.
This error shows I have replaced the placeholders
<aspNetCore processPath="%LAUNCHER_PATH%" arguments="%LAUNCHER_ARGS%"
in web.config with the required values
<aspNetCore processPath="dotnet" arguments="./bin/Debug/netcoreapp1.0/WebApplication2.dll"
(update: these placeholders are replaced when you publish)
As per the troubleshooting instructions I have installed .NET Core Windows Server Hosting Bundle and restarted the server.
Running from the command line via dotnet works
Wondering what to try now.
Ok I figured my issue out. I am pointing the physical path in IIS to the unpublished Visual Studio project root directory. This works in previous versions of .net (ie non dotnet core aspnet projects) but doesnt now.
If you really want this to work then you have to publish your app to a temporary folder and copy the Microsoft.AspNetCore.* binaries back into the bin\Debug\ folder along with the refs and runtimes folders
This is a generic error for when IIS can't find the specified .NET Core components ,and doesn't know where to forward requests. In addition to following the official IIS publishing guide, make sure you have:
Installed the correct versions from the download page for latest .NET Core releases
Specified the correct library versions (explicitly or with wildcards) in your project.json
Included a web.config file (preferably using the publish-iis tool), and that the <aspNetCore> key values have been replaced with local values (source, with examples)
I ran into this while setting up a Core 1.0.0 (final) website on a new Windows 2008 Server. Turns out I had mixed up some of the installers from my dev machine with newer versions, and had mismatched library versions (RC2 vs final). Reinstalling the Server Hosting package fixed the problem.
The key to troubleshooting was to get into the console and use the dotnet commands (and resulting error messages) to iterate until I had my site running from the console, since the IIS error page in the browser was useless. I also found some benefit in a few entries in the system Error logs, but not much.
I am trying to deploy a simple "Hello World" .NET 4.0 REST-style WCF service on WinXP (IIS5). It works fine in Cassini.
I tried to adapt the info here to me:
http://haacked.com/archive/2008/11/26/asp.net-mvc-on-iis-6-walkthrough.aspx
but something is not clicking. Can anyone lend ideas or comments? Yes, I must stay with WinXP.
Thanks.
After a fair amount of struggling I was able to successfully deploy a WCF 4.0 REST web service on XP/IIS5. For the benefit of you and others in the same situation, here's what I did (let me know if you need more detail):
Using VS 2010, build a deployment
package for the project and then
install it on the target machine
(your web server). The following
link will show you how to do this: http://vishaljoshi.blogspot.com/2009/03/web-packaging-installing-web-packages.html
Make sure that your virtual directory in IIS is configured to use .NET 4 (right click on virtual directory > properties > ASP.NET tab > ASP.NET Version)
Configure your virtual directory to support extensionless requests (i.e. your REST API) by creating a wildcard mapping (right click on virtual directory > properties > configuration > mappings tab) with the following properties:
Executable: C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll
Extension: .*
Check that file exists: unchecked
(Note: watch out for the bug that keeps the "OK" button on this dialog grayed out. To get around this just click in the executable textbox after entering your extension and the "OK" button should get enabled).
If you get an authentication error when accessing the service then turn off integrated authentication on the virtual directory. This should fix the problem if you have used the defaults in the generated web.config of your service. If you have explicitly modified the authentication mode then you will have to adapt accordingly.
Have you considered self-hosting your service instead of trying to use IIS. That will probably be easier to do than use IIS.
In case above steps dont work. There could be a problem with permissions on your App pool for that website / virtual directory , you can try to set that right and try it out.
You can refer this article for more help on this.
http://technicalwizardry.blogspot.in/2013/04/wcf-rest-service-hosted-on-iis-5.html#!/2013/04/wcf-rest-service-hosted-on-iis-5.html
I am trying to generate a WCF proxy client code for a Windows mobile application that uses basicHttpBinding and I'm continuously receiving the follow error:
Error: An error occurred in the tool.
Error: Error in the application
I was able to generate the proxy before but I don't know why suddenly this happens.
I have read the Sameh Samir's post but the service I use doesn't use any Message Contracts created by me (I've used LINQ to SQL ORD) and the WCFTestClient can connect to the service and shows the contracts.
UPDATE
It seems the problem was with the Windows 7 RC1. I was trying it on Win7 and after running the NetCFSvcUtil on XP everything works just fine.
Anyone knows how can I report this problem to the Microsoft?
THere is now a new tool available that replaces the older version of NetCFSvcUtil. It came out on Monday, August 10, 2009. It can be downloaded at the following link:
http://download.microsoft.com/download/6/2/0/6205ED05-E435-44FC-AA82-B763CA5F8B1A/NetCFSvcUtil.exe
Best of luck!
I found this: http://blogs.msdn.com/habibh/archive/2009/06/26/netcfsvcutil-exe-and-windows-7.aspx
Basically, it states:
Currently, there are no fixes available for this issue. The only workaround is to run NetCFSvcUtil.exe on Windows Vista (SP1 or earlier) or Windows Server 2008 (SP1 or earlier) and then copy the generated client code to other machines.
I am trying to deploy a Silverlight application on a remote server. I've copied over the files within App.Web which includes the .svc file. I created a virtual directory within IIS 6.0 and am able to successfully host the silverlight portion.
BUT... now I am getting an error:
The type 'ServiceGateway', provided as the Service attribute value in the ServiceHost directive could not be found.
I've tried restarting IIS, verified that the ISAPI mapping for .svc extension is showing in IIS.
It seems to me that the service is not getting started.
Thoughts?
Missing a type sounds like it either wasn't compiled properly or the reference doesn't exist on the server. What version of .NET is installed on the server? It should be at least 3.0.
It looks like the service isn't getting started because you're missing the ServiceGateway type. You may be missing the entire assembly it's meant to be in.