While updating the dataset in rdlc report file ,I got below error.
Could not load file or assembly 'PayPalCoreSDK, Version=1.3.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
How can I resolve this as i am unable to work on rdlc anymore .Kindly help here.
This question is kinda old already, but just in case someone searching for an answer for this problem gets here, I'll say this has happened to me several times. Apparently there's some problem when working with a solution containing multiple projects. You gotta remove all references to other projects on the project you are trying to change the rldc report, once you do that u'll be able to refresh your report source in design. Hope this helps someone.
Related
I am a .NET Developer. I have a good understanding of how references work in .NET i.e. if you want to use AssemblyA.ClassA.MethodA in AssemblyB.classB.MethodB then you add a reference in Assembly A to Assembly B.
I am looking at a VB6 app and I get an error when I open it i.e. Errors during load. Refer to frmMain.log. I open frmMain.log and it says: "2142: Class MSComDlg.CommonDialog of control CommonDialog1 was not a loaded control class.". I have used WinMerge to compare the source code in the faulty project to a previous version of the project (which does not have the problem). The only difference is that the faulty project contains the following line in the client.vdp file:
Reference=*\G{08DBEFD7-6A19-4DCE-A533-5BDBB93683C8}#1.2#0#..\..\..\..\..\Windows\SysWOW64\Comdlg32.oca#Microsoft Common Dialog Control 6.0 (SP3)
Removing this line seems to resolve the problem. Why does this resolve the problem?
I have used Winmerge to compare yesterdays revision of the project (which does not have the problem) to todays revision of the project (which does have the problem). The only difference is the reference in the original post in the VBP file.
I would assume that someone installed the development version of this control on a different machine and then set a reference to it. When you try to open the project on your machine the reference fails. Or the control was uninstalled. It seems that the project was not using the reference and that it can be safely removed as it will still compile without the reference.
However, I have seen vb6 actually remove non-licensed controls from the form in question in this situation. So it may be that you can now compile because the form is missing a component that was there previously. Have you checked that frmMain has not changed, both the .frm and .frx files?
Ì have had this problem in a number of projects and I have almost given up. I am sure there is a solution though. When I insert a Flash object in a VB.Net Windows Forms application, it works fine for a little while and then I see this error in the Design Screen. I am using Visual Studio 2010
Could not load file or assembly 'Interop.ShockwaveFlashObjects, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
I have read several descriptions of why this happens, and apparently it has something to do with strong naming (or lack thereof), but have not found a solution yet. I used Add Reference->COM->Shockwave Flash (C:\Windows\SysWOW64\Macromed\Flash\Flash32_11_2_202_235.ocx) If I ignore the error it appears to work fine, but I don't want my users to have a problem.
I know I can use a browser control and play the Flash in that, but for reasons I won't get into, I have to use a Flash control. Any ideas would help.
Okay. I can't promise this to work for you, but it worked for me.
First, you have to locate a file on your computer titled AxImp.exe. You have to run it from the command prompt. This file is located (for me at least) here:
C:\Program Files\Microsoft SDKs\Windows\v7.0\Bin\x64
Once you do find and run it, you have to point it to the correct Flash.ocx file you're using, like so:
AxImp.exe <path>\Flash.ocx
Once you've done that you should end up with 2 DLL files in the same directory as the .ocx file. One called AxShockwaveFlashObjects.dll and another called ShockwaveFlashObjects.dll.
You don't care about ShockwaveFlashObjects.dll, just AxShockwaveFlashObjects.dll.
Grab that file and the Flash*.ocx file and paste them into the project directory.
Then include them into your references. This should open up two new references, AxShockwaveObjects and ShockwaveObjects.
Make sure you're Using both of them.
After this, you have to register the Flash*.ocx using RegSvr32 from your command prompt (make sure to run CMD in admin mode). That is done like so:
C:\RegSvr32 <path>\Flash.ocx
This worked for me. I was having the exact same problem (which is what led me here). It could be a half backed hack workaround but for now, that's how it worked for me.
Let me know if it works for you or not.
Hope it goes well for you.
I know this is an old post but I had this issue yesterday and the solution, at least in my case, was very simple. All I had to do was to change the Platform and Platform Target to x86 (Build tab of project property).
I'm working on msbuild to get version info from assembly file. But i got a problem that the value $(MaxAssemblyVersion) is always empty. The only difference here is that i got a .Net solution including several projects. So i have a GlobalAssemblyInfo.cs at the root folder and Assemblyinfo.cs inside every included project. Anyone has any suggestion for my situation? Is there any way to work with GlobalAssemblyinfo.cs?
Look forward to your reply!
Every comment will be very helpful and appropriated.
Many thanks,
Depending on what point during the build you need the assembly version, you could extract it from your outputs using the GetAssemblyIdentity Task.
hi
I have delivered a vb.net solution which contains 3 projects (Biz, Data Access, Presentation).
Recently, when I compile it, I get the following error:
"The located assembly's manifest definition does not match the assembly reference(Exception from HResult.....)"
When I double click on it, unfortunately it says to me that "The document cannot be opened. It has been renamed, deleted or moved"
How can I solve it? I should say that did several things such as "Clean solution, rebuild it" but it didn't work.
What's your suggestion?
thank you
You should look at this post on StackOverflow: The located assembly's manifest definition does not match the assembly reference
I believe it answers the same question you present here.
It means one of the assemblies referenced in your project cannot be located. It has located the assembly but it doesn't fully match it, for ex either the version, culture or public key token is different.
I want to remove AssemblyInfo.cpp, because of some metadata errors that sometimes come up.
Is AssemblyInfo.cpp useful for anything? Or can it be removed without any problem?
I've discovered one distinction for this file: it has to do with values reported under calls to Assembly.GetReferencedAssemblies. I was working on tracking version numbers of our binaries from our SVN repository by embedding the revision numbers into them. Initially I too was updating AssemblyInfo.cpp and found nothing reported in the file property details tab for the binary. It seemed this file did nothing for me in terms of updating those details, which was not the case with similar updates to a csproj's AssemblyInfo.cs. Why the difference right?
Now in one such csproj we happen to reference a vcxproj and that csproj dumps to a log the versions of all its referenced assemblies using the .NET Assembly.GetReferencedAssemblies method. What I discovered was that the number that was being reported in that log was not the vcxproj's version as given by the VS_VERSIONINFO resource I added (which does get the version details into the file properties details tab). Instead the number reported was actually matching that defined in the AssemblyInfo.cpp.
So for vcxproj files it looks like VS_VERSIONINFO is capable of updating the contents you find under the file properties details tab but AssemblyInfo.cpp is capable of exposing the version to GetReferencedAssemblies. In C# these two areas of reporting seem to be unified. Maybe there's a way to direct AssemblyInfo.cpp to propagate into the file details in some fashion, but what I'm going to wind up doing is duplicating the build info to both locations in a prebuild step. Maybe someone can find a better approach.
So far I never had the AssemblyInfo.cpp in my managed c++ dlls, so I don't think it is necessary.
(I just added the file to have version information for my c++ dlls).
Why not just fix the errors? On that note, what errors are you getting?
This file provides information such as a version number which is definitely needed in order to use the assembly you have built.