I have problems to read the error codes and corresponding messages of SCI message classes.
Is there an way to easy access those?
I'm using "Praxishandbuch SAP Code Inspector" as a reference, but in that regard it is of no help.
I looked in Se11 but the information to the messages isn't helpful.
Has someone an approch to build such a table?
You can try this, perhaps it will work for you. I use the code below to get the access to all the errors found by Code Inspector for particular user(s):
data: ref_inspec_a type ref to cl_ci_inspection.
ref_inspec_a = cl_ci_inspection=>get_ref(
p_user = pa_iuser
p_name = pa_inam
p_vers = pa_ivers ).
data: ls_resp type scir_resp,
lt_resp type scit_resp.
clear: ls_resp, lt_resp.
ls_resp-sign = 'I'.
ls_resp-option = 'EQ'.
ls_resp-low = pa_fuser.
insert ls_resp into table lt_resp.
call method ref_inspec_a->get_results
exporting
p_responsibl = lt_resp
exceptions
insp_not_yet_executed = 1
overflow = 2
others = 3.
Playing around with LT_RESP you can get results for more users at the same time.
After you execute the code above, you can check the attributes SCIRESTPS and SCIRESTHD of the object REF_INSPEC_A. These are the large tables, which contain the result data of the SCI check. You can either work with them on your own, or you can simply pass the object REF_INSPEC_A into the function module SCI_SHOW_RESULTS to get regular SCI user interface.
I found out that you can get all the changeable messages (found in SCI GoTo/Management Of/ Message Priorities) can be read from the scimessages attribute of the test classes.
With this help you can get about 60% of all errors.
Related
I am currently trying to program a function module which should, in theory, output a custom table like T052, but with an additional field Z_TEXTLONG, which explains the details of the chosen ZTERM, akin to the text in FI_F4_ZTERM's popup. Here's what I tried:
LOOP AT T_ZBEDS ASSIGNING FIELD-SYMBOL(<line>).
CALL FUNCTION 'FI_F4_ZTERM'
EXPORTING
I_KOART = 'K'
I_ZTERM = <line>-zterm
I_XSHOW = ''
I_ZTYPE = ''
I_NO_POPUP = 'X'
IMPORTING
E_ZTERM = v_text
EXCEPTIONS
NOTHING_FOUND = 1
OTHERS = 2.
WRITE v_text TO <line>-Z_TEXTLONG.
From what I gathered, this does not work due to FI_F4_ZTERM writing the list it returns into E_ZTERM, not a single value, which would be what I need. I am a bit lost as to what I should do next. I tried looking into how exactly FI_F4_ZTERM generates these texts or where it calls them from, but I was not successful. Currently, I am trying to maybe get this text from V_T052, but that does not work either. I would be thankful for any suggestions.
Try function FI_TEXT_ZTERM, it has single import parameter I_T052
why not just call CALL FUNCTION 'FI_F4_ZTERM'
with I_NO_POPUP = 'X'
importing
ET_ZTERM = lt_zterm.
you get the list of payment terms and their texts.
Then in the loop read it from the table of payment terms.
LOOP AT T_ZBEDS ASSIGNING FIELD-SYMBOL(<line>).
read table lt_zterm assigning <term>
with key ZTERM = <line>-zterm.
ENDLOOP.
I want to send the spool generated by a Smart Form, by email as attachment in TXT format.
The issue is to get the spool in a TXT format, without technical stuff, just the characters in the form.
I have used the function module RSPO_RETURN_SPOOLJOB for getting it, but it returns a technical format like this:
//XHPLJIIID 0700 00000+00000+
IN01ES_CA930_DEMO_3 FIRST
OPINCH12 P 144 240 1728020160000010000100001
IN02MAIN
MT0100808400
CP11000000E
FCCOURIER 120 00144 SF001SF001110000144E
UL +0000000000000
ST0201614Dear Customer,
MT0214209000
ST0864060We would like to take this opportunity to confirm the flight
MT0100809360
ST0763253reservations listed below. Thank you for your custom.
...
I want something as follows, without the technical stuff:
Dear Customer,
We would like to take this opportunity to confirm the flight
reservations listed below. Thank you for your custom.
...
This is the code I have used :
PARAMETERS spoolnum type TSP01-RQIDENT.
DATA spool_contents type soli_tab.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
exporting
rqident = spoolnum
tables
buffer = spool_contents
exceptions
others = 1.
If the parameter DESIRED_TYPE is not passed or has the value 'OTF', and the spool is of type SAPscript/Smart Form, the function module returns the technical format you have experienced.
Instead, you should use the parameter DESIRED_TYPE = 'RAW' so that all the technical stuff is interpreted and the form is returned as text, the way you request, as follows :
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
exporting
rqident = spoolnum
desired_type = 'RAW'
tables
buffer = spool_contents
exceptions
others = 1.
In Transaction BSP_WD_CMPWB I found a view from the WebUI Client.
I want to write a method that gets all the values of the attributes of the view structure.
How do I do this?
I think I need to find out somehow which BOL-Object this view structure belongs to...but I don't really know.
I started out like this...but no idea if I'm on the right track there :D
DATA:
ls_view TYPE "How do I find out the structure type name of my view, does it even exist?
lv_query_name TYPE CRM_OBJEXT_NAME VALUE. "How do I find out the query name I need to pass to get my view structure?
lr_query = cl_crm_iu_order_agent=>create_order_item_query_int( lv_query_name ).
ls_parameter-name = 'BUPA_NUMBER'. "This is an example filter for my specific case
ls_parameter-value = iv_partner.
APPEND ls_parameter TO lt_paramater.
lr_query->set_query_parameters( it_parameters = lt_paramater ).
lr_result = lr_query->get_query_result( ).
CHECK lr_result IS BOUND.
lr_bol = lr_result->get_first( ).
lr_bol->get_properties( IMPORTING es_attributes = ls_view ).
I don't have any developer rights in my SAP-System but I found a way to write some ABAP-Code in a tiny "User-Exit" box (I don't know if that's what you call it) inside a report.
I'm trying to submit a HR-Report and plug it's outcoming PERNR into that same report again.
There's a syntax-error that is telling me that t_list doesn't have a component with the Name PERNR.
What do I have to do in order to get this to work?
DATA: t_list TYPE TABLE OF abaplist WITH HEADER LINE,
seltab TYPE TABLE OF rsparams,
selline LIKE LINE OF seltab.
*I found out that the name of the selection field in the Report-GUI is "PNPPERNR" and tested it
selline-selname = 'PNPPERNR'.
selline-sign = 'I'.
selline-option = 'EQ'.
SUBMIT Y5000112
USING SELECTION-SET 'V1_TEST'
EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_list
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE 'Unable to get list from memory'.
ELSE.
LOOP AT t_list.
*The Problem is here: how do I get the pnppernr out of t_list, it's the first column of the report output
selline-low = t_list-pernr.
append selline to seltab.
ENDLOOP.
SUBMIT Y5000112
WITH SELECTION-TABLE seltab
USING SELECTION-SET 'V2_TEST'
AND RETURN.
ENDIF.
Use the function module LIST_TO_ASCI to decode the contents of t_list into something readable. This answer contains some sample code including the data types required. At this point, the data you're looking for will probably occur at the same column range in the output. Use the standard substring access methods - e. g. line+42(21) to obtain the part of the line you need.
The vwegert's answer is more than useful! In my previous answer I forgot to mention LIST_TO_ASCI FM :)
The only thing I can add is that parsing of result lines has no universal solution and greatly depends on its structure. Usually it is done like:
LOOP AT t_list.
SPLIT t_list AT '|' INTO <required_structure>.
selline-low = <required_structure>-pernr.
APPEND selline TO seltab.
ENDLOOP.
where <`required_structure> is your Y5000112 output structure. But this may be not so simple and may require additional manipulations.
I have the following code:
set output spoole
select * from displays where displayname='dsp020a'
select * from forms where formname in (select formname from displayforms where displayname='dsp020a')
select * from formfields where formname in (select formname from displayforms where displayname='dsp020a')
The third select is crashing ZIM with the following error:
*** ZIM System Error *** The Zim tree pool has overflowed. Type BYE to exit from Zim.
What am I doing wrong and how can I fix it?
When trying to use SQL in ZIM, I also saw problems and unexpected errors. You should always try to use the native ZIM 4GL commands to access data as well as object definitions.
ZIM Data Dictionary contains some predefined internal relations which can help analyse the data model. For example, you could say:
list all Displays DispDispForms DisplayForms where Displays.DisplayName = "dsp020a"
to find out which forms are contained in the given display. Likewise you could do:
list all Forms FormFormFields FormFields where Forms.FormName in ("f020a", "f020b", "f020c")
to list all form fields which belong to the given forms. Unfortunately, there is no relation between DisplayForms and Forms, so you cannot achieve directly what you tried in your example using SQL.
OR (added after your comment):
You can achieve that using a small program. For this example, it would be:
set output output_file
find Displays DispDispForms DisplayForms where Displays.DisplayName = "dsp020a"
while $setcount > 0
let vStr = DisplayForms.FormName
list all Forms FormFormFields FormFields where Forms.FormName = vStr
let $setcount = $setcount - 1
next
endwhile
set output terminal
Now you have all form fields which belong to all forms of the given display listed in the output_file.
There probably already is a relationship between dfs and forms in the db schema but the documentation is poor. However, you can create your own. Note that dfs is a role for displayforms.
add 1 rels let relname = 'dfsforms' relcondition = 'dfs.formname = forms.formname' reltype = 'ZIM' dirname = 'ZIM'
create rel dfsforms
Now you can find forms related to displays using:
find all displays dispdispforms dfs dfsforms forms formformformfields wh displays.displayname = 'dsp020a'