I'm working with some application handed over by another person in which I must document the requirements, build and deploy processes.
The problem here is that Visual Studio (2005) is throwing a lot of errors since it can't find the references for the dlls.
This obviously won't let VS build the project.
Everything works fine on the persons computer but not on mine, even though the project references the same folder where the dlls are, the bin folder.
How can I circumvent these problems and get VS to properly reference the dlls?
The following printscreen shows the references screen for the project.
My guess is that your DLL uses a more recent .NET framework than your application does.
Check the properties for your DLL source (right-click on the DLL code in the solution explorer and choose Properties). Go to Application - Target .NET framework and compare the version to the one the application itself uses (right-click on the project code). Note: under your application properties check both the settings under Application - Target .NET framework AND under Publish - Prerequisites.
For what it's worth, even after changing the .vbproj file and removing many lines about hard coded values,
I eventually checked out the project again removed all references to the given DLL and then added it using the GUI.
Lesson learned, don't try to change out one DLL for a newer version without using VB2005 GUI.
The easiest solution will probably be to transfer everything to another project. It will be incredibly time consuming to find where visual studio has left the hard coded path at.
WOOT!!!! Compile the DLL file to a lower version of the .NET framework, and it will fix the problem!!!!
The paths in the project file cannot be the same or the assemblies referenced have a different version.
It might be worth unloading your project and the editing it to inspect where it's looking and for what version.
I had the same problem with an older Visual Studio Project that I opened in Visual Studio 2008. I tried to add new references to the project and got permanent errors that the dll's cannot be found. After the migration of the Project to Visual Studio 2010 I got the following error message when I tried to add a new reference:
'mySample.dll' or one of its dependencies, requires a later version of the .NET Framework than the one specified in the project. You can change ...
After changing the projects .NET Framework to a newer version everything works fine.
Good suggestions in other answers. In my case, it was because the libraries weren't copied (downloaded) successfully: the files existed, but were 0 kB.
Did a clean, which removed all the DLL's and then VS2008 complained it couldn't find the references (Duh!!!) and wouldn't rebuild....luckily I had and old version of the dll's and replaced them in the directory AND THEN did a rebuild to replace them...all references are now OK and we're back to normal....good old VS 2008
Related
I have made a project in VS2019. I have the same project in .NET Core and .NET Framework. I use a COM reference in my project. I would like to migrate these projects to Pi4.
A simple Hello World project (.NET Core) is running successfully on the Pi4 machine. However, when I try to run my project (.NET core or .NET Framework) it does not run on the Pi4. It says COM is not supported.
I tried to build the project using MSBuild in my Windows environment after looking for solutions in Google. I also see a similar error here. The error is: error : MSB4803: The task "ResolveComReference" is not supported on the .NET Core version of MSBuild. Please use the .NET Framework version of MSBuild.
The .NET Framework project also gives a similar error.
error MSB4028: The "ResolveComReference" task's outputs could not be retrieved from the "ResolvedFiles" parameter. Object does not match target type.
Does anyone have similar issues?
https://github.com/microsoft/msbuild/issues/3986
According to the above link. The employee of Microsoft is saying they can not give solution in the near future.
Set the Projects to x86 for them to build the Interop, the Interop created still could not be used in x64 runtimes.
Add the COM Reference to the Core project, Build it and you will get an Interop.YourCom in the bin/x86/core/debug folder.
Remove the COM reference, and re-add the Interop, it will be put into the Assemblies Dependencies, and MSBuild will work.
My MSB4803 was from a WIXInstaller project, for ADOX, and Microsoft.Office.Interop.Access.Dao
I stumbled upon this question many times and I experienced the same several times in different projects. It doesn't matter if it is Visual Studio 2019 or 2022 and the version of the build, unless you are working with the old MSBuild in a legacy environment, the COM Reference doesn't work. It is always safe to build it in the command line to understand if anything in the VS environment works. I don't truly understand why Microsoft let you make those references in the Visual Studio environment when they will not work nearly anywhere else.
There are some workarounds that might or might not work but if your code is already pointing at a COM library there is no much to do. You can install the NuGet package which is going to pass the build stage and remove the COM reference.
Install-Package Microsoft.Office.Interop.Excel -Version 15.0.4795.1001
The NuGet package has some differences at the types level that you will need to fix (the COM reference allows you to get specific types instead of objects from the cells values)
In any case, you will need the COM installed in the server, there is no workaround that issue.
I wouldn't say I like this error message or the link it shows on how to fix it, to be polite.... ;-);
I figured it out and thought as there are a lot of answers that are not helpful to share mine. What I did is update your command to force the use of msbuild.
dotnet msbuild -v:normal "FullOrRelativePathTo\MyProject.csproj" -p:Configuration=RELEASE
If that fails, try:
"C:\Program Files\Microsoft Visual Studio\2022\Enterprise\MSBuild\Current\Bin\msbuild.exe" "PathTo\Project.csproj" /p:Configuration=RELEASE
I know I'm late to the party, but here is a workaround working for me when I want to use Office Interop in .NET (Core):
Create an empty .net Console app (I'm using Rider and .NET 7)
Build it with the default MSBuild (17.0 in my case at the time of writing)
Add Interop references to the project file (I don't use Nuget, only generate these in a dummy .NET Framework project while adding COM references to Office libraries), eg.
<ItemGroup>
<COMReference Include="Excel">
<Guid>{00020813-0000-0000-C000-000000000046}</Guid>
<VersionMajor>1</VersionMajor>
<VersionMinor>9</VersionMinor>
<Lcid>0</Lcid>
<WrapperTool>tlbimp</WrapperTool>
<Isolated>False</Isolated>
<EmbedInteropTypes>True</EmbedInteropTypes>
</COMReference>
</ItemGroup>
Change the solution MSBuild version to 4.0
Try to build the solution, but the project will not even load properly due to an outdated MSBuild version
Revert the MSBuild version to the default one
Build the project - success! (this is the magic part, I can't explain it :P)
Please bear with me on this, since I am a Java developer just dipping a toe into the ASP.Net world
I started coding in an existing C# VS2012 codebase. It uses nuget and Newtonsoft is mentioned in the packages.config
When I right-click on Controllers > Add a new controller, I get the following error.
Could not load file or assembly 'nunit.framework, Version=2.2.4.0, Culture=neutral, PublicKeyToken=...' or one of its dependencies.
The system cannot find the file specified.
Now looking around in Google, it seems the GAC is missing an NUnit assembly. Not sure what I should do about that. Should I get NUnit? Why is it looking for a certain version of nunit (& that too a very old one)?
Any help for me to resolve this problem will be highly appreciated!
When you click "Add new Controller' Visual Studio will try to complete the parse/build to populate a number of values in the window that it is supposed to show you (with the available Models and available Views). It looks like at least one of your projects is missing a dependency (probably your Unit Test project).
NUnit 2.2.4.0 is indeed a pretty old version, it doesn't even exist on NuGet yet (which would have been an easy fix). It makes sense that NUnit is not installed in the GAC, since you normally don't put everything in the GAC just because it seems to be possible. If you're willing to upgrade to the latest NUnit version, the easiest way is to add the NUnit NuGet package to your project through the Package Manager.
I would assume that when you'd open the project file for the project that is generating this warning in Notepad, you'd see a <hintpath> tag as a sibling of the NUnit Reference (it may not be there) which points to the folder where it is telling Visual Studio to look for NUnit.
I suggest you install the NUnit version your project is looking for from here and then update the reference in your project to point to the correct location. That should fix the issue.
As for your remark on the specific version, .NET Assemblies are compiled with a specific version number (usually set in the AssemblyInfo.cs) a reference in a project file can be to a specific version or to any assembly with that name (highlight the reference in the Solution Explorer and check the properties window (ctrl+w,p or alt+enter). You'll see a property "Specific Version" which in your case is set to "true" which caused Visual Studio to store the assembly version in the project file.
Add the code files into a workable solution project.
It is workable for me.
Or, try to create a new Nunit test project with the codes
I also try the following method, but not working for me
Install Nunit, adapter, SDK from the Nuget package
Clean-Rebuild
I'm trying to configure Visual Studio 2012 to allow me to step into ASP.NET MVC 4.0 source code. (System.Web.Mvc.dll). I've followed SymbolSource's recommended configuration but when I try to load the symbols, Visual Studio can't locate them.
Recommended configuration
To configure Visual Studio for symbol/server
use, follow these instructions:
Go to Tools -> Options -> Debugger -> General.
Uncheck “Enable Just My Code (Managed only)”.
Uncheck “Enable .NET Framework source stepping”.
Yes, it is misleading, but if you don't, then Visual Studio will
ignore your custom server order (see further on).
Check “Enable source
server support”.
Uncheck “Require source files to exactly match the
original version”
Go to Tools -> Options -> Debugger -> Symbols.
Select a folder for the local symbol/source cache.
Add symbol servers
under “Symbol file (.pdb) locations”. Pay attention to the correct
order, because some servers may contain symbols for the same binaries:
with or without sources. We recommend the following setup:
http://referencesource.microsoft.com/symbols
http://srv.symbolsource.org/pdb/Public or the authenticated variant
(see above)
http://srv.symbolsource.org/pdb/MyGet or the authenticated
variant (see above) (other symbol servers with sources)
http://msdl.microsoft.com/download/symbols (other symbol servers
without sources)
I am aware that the source code is available on CodePlex, however I'm specifically interested in stepping into the code using a symbol server instead of having to unreference Mvc from the GAC and reference a locally built assembly.
Has anyone had success doing this with MVC 4.0?
Just add a symbol server that serves more then just major releases.
Try this one, contains most minor builds.
http://srv.symbolsource.org/pdb/Public
Verify:
Run VS as administrator.
Check that something have been downloaded to your symbol cache directory.
Goto select only specified modules.
Add "System.Web.Mvc.dll"
Set a break point in your code. Start debug.
When break point hits rightclick in callstack on any mvc.dll row. Verify that symbols are loaded.
if loaded, try dubbleclick on one callstack row to open mvc source.
Get back with where you get in trouble.
I will make some refinements to Luke Gumbley's anwser.
Microsoft tries to make a developer's life easier. Whenever it release an MVC version installer, there should also be a Source to download. So people can use the source to explore what is installed by the Installer, as well as to debug the MVC.
Back to the way of downloading the MVC debug info. Your Visual Studio (I use 2010) will never try to download MVC PDB files from the aforementioned servers if you have MVC4 installed on your system. In this case, your Visual Studio will use the MVC from your GAC when you run debugger.
I have tried the way suggested by Luke Gumbley. However, once you uninstall MVC, your MVC project will not be loaded, and you cannot create a new MVC project since the Template is gone. So please don't unistall MVC. If you do so, you still need to reinstall it. This wastes time.
What you really need to do is exit your Visual Studio, run command
gacutil /u System.Web.Mvc
Then go to C:\Windows\Microsoft.NET\assembly\GAC_MSIL, remove or rename the offending System.Web.Mvc folder. After this, lanuch your Visual Studio, and fetch the MVC package from NuGet.
I can't answer on your question directly and provide you URL with symbols (.pdb) for System.Web.Mvc.dll for ASP.NET MVC 4.0, but probably I can help you to solve the problem in another way.
As well known (see here for example) Microsoft provide the current source code of .NET on http://aspnetwebstack.codeplex.com/. In the post it's described how to use the Nightly version of ASP.NET (the current developer state of the code). If you didn't used Git before you can have problems with downloading RTM version of ASP.NET 4.5 (with ASP.NET MVC 4.0) which you could prefer to use instead of Nightly version. Nevertheless the downloading of the full source code of RTM version is easy enough. You need just to know that Git allows to save copy of the code in branches or tagged versions. In the way you can get access (and download it) to some previous versions of the full code. The link for example provide you jQuery 1.8.2 instead of another link get you the latest developer version which can be unstable. So to download the source code of RTM version you just need to choose "v2-rtm" branch and then click on "Download":
You can use the link to select "v2-rtm" branch directly.
I can repeat that it's not exactly what you asked and I know that compiling of ASP.NET source code could be also a little tricky, but I decided do write the information. If somebody would suggest you the better solution it would be interesting for me too.
I had exactly the same issue (correct version but no symbols), but after a day or so of trying everything I've been able to get it working. These are catch-all instructions that worked for me, they may contain unnecessary steps:
Sign up for SymbolSource and follow the VS instructions using the
authenticated URL form
Uninstall all versions of MVC with add/remove programs
Remove MVC assembly from the GAC (the question is about modifying
MVC but the GAC answer is good)
Remove and then reinstall the MVC 4 reference to your project with
NuGet
Start debugging, open the modules window, and cross your fingers
that ‘Symbols loaded’ is next to System.Web.MVC when it appears.
(sprinkle in restarts as you see fit, for me the key final step was reinstalling the NuGet reference)
My theory is that as the GAC library is used at runtime in preference to the local reference, the symbols are not found when they are searched for. By removing MVC from the GAC and then reinstalling the NuGet reference, it seems the local reference is used and the symbols are found. It's counterintuitive as the System.Web.MVC.dll files are binary-equivalent between NuGet and the GAC, although they are dated differently.
I'm not totally convinced though as I tried to do the same thing for Razor and that didn't work.
Let me start with that ReSharper provides a handy dialog to step in the code at any time:
So you get the following code screen if you drill to the source code:
But I became curious to accomplish this by hand. I started with proper pdb configuration:
After that I got the following error:
Next I copied the C:\Users\Andrew\AppData\Local\Temp\SymbolCache\MicrosoftPublicSymbols\System.Web.pdb\CA49C4332DE847FA967F58AFF370B70E1\System.Web.pdb to C:\Users\Andrew\AppData\Local\Temp\SymbolCache\System.Web.pdb (to match the lookup path). After that i encountered this:
And it turned out that the mismatching builds are only good for browsing the source, not debugging. (Current machine has VS2012 RC, hence MVC libraries are not RTM). If they match, you'll the the source.
I still don't know why doesn't the lookup path adjust to symbol configuration. Hope this helps.
I just solved this same problem.
The problem is that the dll stored in the GAC does not correspond exactly to the published pdbs on symbolsource.org. The one on symbolsource corresponds apparently to the latest version available through Nuget, and the one in the GAC must the one installed with .NET Framework 4.5. (.Net uses whatever is on the GAC before attemting to use anything local to your proyect, you can see this, when debuggin, go the Debug->Windows->Modules, there the System.Web.Mvc.dll is the one from GAC according to its path)
What I did was to include in the GAC the System.Web.Mvc.dll on the package folder of my solution, the one downloaded through Nuget. This you can do by using gacutil on a VS Command Prompt (run the VS Cmd as admin).
You can check on the same Modules Windows, right clicking on the System.Web.Mvc.dll, and then on Symbol Load Information. With the "old" GAC dll you get a message like (part of it)
SYMSRV: http://srv.symbolsource.org/pdb/Public/System.Web.Mvc.pdb/1E540B87149F4031B9CDEACAD8D771231/System.Web.Mvc.pdb not found
Notice here the subfolder 1E540B87149F4031B9CDEACAD8D771231 (yours might be different)
After replacing the GAC dll for the one recently downloaded through Nuget, the message is
SYMSRV: System.Web.Mvc.pdb from http://srv.symbolsource.org/pdb/Public: 336067 bytes
http://srv.symbolsource.org/pdb/Public: Symbols downloaded from symbol server.
C:\Users\\AppData\Local\Temp\SymbolCache\System.Web.Mvc.pdb\68B2330E48624B6C9DE05BED1C8C320F1\System.Web.Mvc.pdb: Symbols loaded.
Notice the subfolder 68B2330E48624B6C9DE05BED1C8C320F1, which is the one that is searched for in symbolsource.org is the correctly found.
Hope this helps
There's some related info here: http://aspnetwebstack.codeplex.com/discussions/399312
And here: Debug into nightly build of ASP.NET MVC4 using Symbolserver
I've created a class library in Visual Studio 2008, and when I try to add the dll as a reference, I get the message in the title for the Path field in my project references. I've been going for a week trying to figure out this issue, and I haven't been able to come up with anything. The strange thing is I can add the same reference to a Visual Studio 2010 project, and it works perfectly fine.
I used VS 2008 to build it because the dll isn't used in house and needs to be compatible with .Net 3.5. Any ideas?
EDIT: I also found out that referencing the dll in a c# project works fine as well. It's only Visual Basic that's causing me problems.
Resolution
Using DependencyWalker, I was able to find out that some obscure dll was indirectly being
referenced (IEShims.dll) but couldn't be found. After a little more trial and error, I found my project had a specified reference path (Project Properties -> References -> Reference Paths) that pointed to the project's DEBUG directory. I had to remove that reference path, which then resolved the above issue.
I have a seemingly random problem where my project will run using an old version of a DLL file that no longer exists. Sometimes the real version of the DLL file will be used, other times an ancient version of the DLL file will be used. Who knows where Visual Studio is getting this DLL file from - it's months out of date!
I know that it is using the old DLL file, because when the application runs I start getting weird 'TypeLoadExceptions', complaining that methods don't exist or don't have implementations.
The following actions will sometimes help, sometimes not:
Restarting Visual Studio
Restarting the computer
Cleaning and rebuilding the solution
Deleting everything in \WINDOWS\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files
Searching for and deleting instances of the DLL file in \Documents and Settings\username\Local Settings\Temp
Sometimes I perform all of the above steps, and it still uses an old copy of the DLL file. Where is it hiding it?!
The same issue exists on our TeamCity server which is using MSBuild. When TeamCity tries to run unit tests it uses an old DLL file.
Now, I know that I can use assembly redirection in the web.config file, but the version number of the DLL file hasn't changed (I don't bother to update it, so it just stays at version 1). I don't want to have to start versioning the DLL files just to solve this problem. I would just like to know which particular caches I need to clear so that I can get on with developing.
It hides it in the GAC. There it may reside indefinitely. Using a more recent version may indeed solve the problem, but there is an outstanding bug in Visual Studio that has to do with choosing the correct version of DLL files. (If DLL Hell wasn't bad enough, the Visual Studio team is making it worse!)
Finding it in the GAC is tricky, and I cannot advise you on how to do that, but once the old version is deleted from there, it will not be found again. Sometimes, even though you are pointing the compiler at a newer version (by date), it will use the older version, because it has the same version level (by version). That is its bug.
Who knows where Visual Studio is getting this dll from - it's months
out of date!
The Modules Window is your friend...
It'll tell you exactly where that file is coming from. You can even use it with arbitrary processes if you attach the debugger.
I too would guess that they're hiding in the GAC.
You can look in 'C:\Windows\assembly' to see all the dlls and unregister yours from there.
The problem may exists with the build order or your projects.
If your Test project is built before the application project, this cause the behaviour you describe. To fix this: right click on your main project in VS and select the Project Dependencies... option and check the build order. Changes to the build subsequence can be made here by correctly setting these dependencies.
I had a similiar problem (but without Visual Studio). I am loading a .NET dll using UnsafeLoadFrom.
On one computer (a terminal server) the old file still remains being used, regardless of updated version numbers, etc.
The reason is simple: As long as a program instance is running, which has already loaded the old dll, the new dll will never be used. All further UnsafeLoadFrom will become the old dll although the old version doesn't exist on the harddisk anymore, because it has already loaded some time ago.
The solution is to shut down all running instances of the application or even restart the computer. Then all new instances will get the updated dll.
In my case, this was caused switching to Release mode, which had a different configuration (that used different location of the DLL).
In my case, I use Visual Studio to Publish Website, and though I check the reference of the dll file has changed, but the published dll still is old. Finally I new a Publish Web Profile and choose the right configuration (such as Debug - x86 / Release - Any CPU), publish again then the dll is corrected.
While this question is old, maybe someone will stumble upon it again in his/her quest for finding a solution.
In my case i got a CS0433 error for an ASP.Net page. After deleting the content in the obj\ and bin\ folders of the project, it worked again. Probably has to be done with a closed Visual Studio. Maybe also clean out those folders in referenced projects in the same solution (if used in the project and not pulled via Nuget).
In my case, the old DLL was in
C:\Windows\Microsoft.NET\assembly\GAC_MSIL\MyDLL\MyDLL.dll
It DID NOT show up in c:\Windows\assembly.
I did a search of my drive for MyDLL, and it showed up as indicated above. I was debugging my test app at the time, and tried to delete the offending folder...no go...it was locked by Visual Studio. I had to stop debugging my app, close Visual Studio, and then delete the folder. Problem solved!! I don't know how my DLL got there, but it hasn't showed up there since I deleted it.
It's possible that the DLL is being referenced from another folder. It could even be on a network drive if you have one in your PATH environment variable. Here's how Windows searches for DLLs:
http://msdn.microsoft.com/en-us/library/7d83bc18%28v=vs.80%29.aspx
In My Visual Studio 2015, I ensured that the offending Visual Studio project's Reference Path Listing is empty:
If you find such problem ,delete your Reference dll and pdb extensionfile add new references and rebuild your project .This often happens due to no rebuild of project,commit and updates.
The fix for me was making sure that the virtual directory in IIS was pointing to the correct directory. I have two projects on my system, a v4 and a v5. The virtual directory on my dev system was pointing to the v4 bin directory instead of my v5 bin directory - oops!
The file that was being cached in the dll, I couldn't trace the file, so I ended up renaming the file. This might not resolve the problem mentioned here but this was the fix that worked for me related to this question.
I tried a ton of things including re-installing VS 2107.
You can see where the DLL files are being loaded from in your Output window. After going through all mine looking for project DLL, I found it.
Clearing this worked for me.
C:\Users\YourUser\AppData\Local\assembly\dl3\222Q4G1T.8AT\JBEAR7PB.E3J\8bfcf9ab\6e61cbd5_30acd401\YourDLL.dll'
I actually deleted all the files in:
C:\Users\YourUser\AppData\Local\assembly\
Holy Crow! I had an old, old suite of applications including 2 web services and a bunch of class libraries and a click once application. Well, click once stopped publishing for VS 2005 with a bunch of 'not found' errors. So, rather than hack away at my registry as suggested on this site, I figured it was time to upgrade the projects to 2017. Well, when I did this, the projects references in my web service projects got lost. Then, rather than helpfully just telling me that with errors, VS 2017 must have went to some cached file in C:\Users\XXX\AppData\Local\Temp\WebSitePublish or C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\8.0\ProjectAssemblies or C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root and 'helpfully' just used those files instead! I had to do a hardcore search with a custom program to find all the files on my C:\ drive and delete them before I finally got the errors!