I have data in a table like following
Name indicator
A 1
A 2
A 3
B 1
B 2
C 3
I want to get count of Names, for which both indicator 1,2 exists. In the preeceding example, this number is 2 (A & B both have indicator as 1, and 2).
The data I am dealing with is moderately large, and i need to get the similar information of some other permutations of (pre defined ) indicators (which i can change, once i get base query).
Try this:
SELECT Name
FROM Tablename
WHERE indicator IN(1, 2)
GROUP BY Name
HAVING COUNT(DISTINCT indicator) = 2;
See it in action here:
SQL Fiddle Demo
Related
I would like to filter data by column Base =1 and then count the number of unique values in another column 'Animal' in SQL, data:
Animal Base Value
1 A 1 X
2 B 1 X
3 A 2 Y
4 A 3 V
Expected output in this case is 2 from the first two rows.
Simpler than you may have thought:
SELECT count(DISTINCT Animal)
FROM tbl
WHERE Base = 1;
Should work in any halfway decent RDBMS including your undisclosed one. (You may have to enclose column names in double-quotes.)
This should do it, assuming the table is named animals:
select count(*) from (select distinct Animal from animals where Base=1) tb1;
I have two tables, one with a single row for each "batch_number" and another with defect details for each batch. The first table has a "defect_of_interest" column which I would like to link to one of the columns in the second table. I am trying to write a query that would then pick the maximum value in that dynamically linked column for any "unit_number" in the "batch_number".
Here is the SQLFiddle with example data for each table: http://sqlfiddle.com/#!9/a1c27d
For example, the maximum value in the DEFECT_DETAILS.SCRATCHES column for BATCH_NUMBER = A1 is 12.
Here is my desired output:
BATCH_NUMBER DEFECT_OF_INTEREST MAXIMUM_DEFECT_COUNT
------------ ------------------ --------------------
A1 SCRATCHES 12
B3 BUMPS 4
C2 STAINS 9
I have tried using the PIVOT function, but I can't get it to work. Not sure if it works in cases like this. Any help would be much appreciated.
If the number of columns is fixed (it seems to be) you can use CASE to select the specific value according to the related table. Then aggregating is simple.
For example:
select
batch_number,
max(defect_of_interest) as defect_of_interest,
max(defect_count) as maximum_defect_count
from (
select
d.batch_number,
b.defect_of_interest,
case when b.defect_of_interest = 'SCRATCHES' then d.scratches
when b.defect_of_interest = 'BUMPS' then d.bumps
when b.defect_of_interest = 'STAINS' then d.stains
end as defect_count
from defect_details d
join batches b on b.batch_number = d.batch_number
) x
group by batch_number
order by batch_number;
See Oracle example in db<>fiddle.
this is a sample sql query that i created ms access query. i am trying to get only one row the min(DATE). how ever when i run my query i get multiple lines. any hits? thanks
SELECT tblWarehouseItem.whiItemName,
tblWarehouseItem.whiQty,
tblWarehouseItem.whiPrice,
Min(tblWarehouseItem.whiDateIn) AS MinOfwhiDateIn,
tblWarehouseItem.whiExpiryDate,
tblWarehouseItem.whiwrhID
FROM tblWarehouseItem
GROUP BY tblWarehouseItem.whiDateIn,
tblWarehouseItem.whiItemName,
tblWarehouseItem.whiQty,
tblWarehouseItem.whiPrice,
tblWarehouseItem.whiExpiryDate,
tblWarehouseItem.whiwrhID;
If i have my sql code like that is working as it should:
SELECT MIN(tblWarehouseItem.whiDateIn) FROM tblWarehouseItem;
In the first query, you group by a number of columns. That means the minimum value will be calculated for each group, which in turn means you may have multiple rows. On the other hand, the second query will only get the minimum value for the specified column from all rows, so that there is only one row in the result set.
A simple example is shown below to illustrate the above.
Table:
Key Value
1 1
1 2
2 3
2 4
On Group By Key:
GroupKey MinValue
1 = min(1,2) = 1 -> Row 1
2 = min(3,4) = 3 -> Row 2
On Min (Value)
MinValue
=min(1,2,3,4) = 1 -> Row 1
For a table like above, if you want to select all rows and also show the minimum value from whole table rather than per group, you can do something like this:
select key, (select min(value) from table)
from table
SELECT WI.*
FROM tblWarehouseItem AS WI INNER JOIN (SELECT whiimtID, MIN(tblWarehouseItem.whiDateIn) AS whiDateIn
FROM tblWarehouseItem
GROUP BY whiimtID) AS MinWI ON (WI.whiDateIn = MinWI.whiDateIn) AND (WI.whiimtID = MinWI.whiimtID);
I am working on a hotel management software and I need to display floors and the rooms on that floor......
I have a wing_master table in the database with following columns -:
wing_id,
wing_name,
floor,
floor_room_count,
status
Its like I have a record for one wing in that hotel which has 4 floors, but when I write a query to get the floors in that wing it just gives me "4" as the result in sql.....
I want the query to return it as follows -:
1
2
3
4
I want it this way so that I can use nested data-list control in asp.net....
My query is "select floors from wing_master where wing_id = 1"
For most databases (not MySQL), you can use a recursive query to obtain all floors:
with all_floors as (
select floors from wing_master where wing_id = 1
union all
select floors - 1 as floors from all_floors
where floors > 1
)
select * from all_floors order by floors;
SQLFiddle example.
In MySQL, the easiest way would be to create a numbers table that has a sequence of numbers up to the highest possible floor. Then join to that table to get all floors:
select num from wing_master
join numbers on
wing_id = 1 and
num <= floors;
SqlFiddle example.
Your query is ok, and also it seems that query and table structure will be fulfilling your requirements. can you show your data, because as per the structure, there should be four rows in the table, showing floor 1, 2, 3, 4
something like this
floor wing_id
1 1
2 1
3 1
4 1
If that is how your data looks, then your query must be ok, else there is some other issue. so do share your structure with few rows of data.
Suppose I have a table that looks like this:
id attribute
1 football
1 NFL
1 ball
2 football
2 autograph
2 nfl
2 blah
2 NFL
I would like to get a list of distinct ids where the attribute column contains the terms "football", "NFL", and "ball". So 1 would be included, but 2 would not. What's the most elegant/efficient way to do this in Terdata?
The number of attributes can vary for each id, and terms can repeat. For example, NFL appears twice for id 2.
You can use the following:
select id
from yourtable
where attribute in ('football', 'NFL', 'ball')
group by id
having count(distinct attribute) = 3
See SQL Fiddle with Demo (fiddle is showing MySQL, but this should work in TeraData)