I´m trying to make a number to change its last two digits to zero.
In Excel, in a certain Cell I will always get for sure a number always higher than 100. Let´s assume that I get the number 26312. What I want is to the number to be changed for 26300. Another example, if I get the number 14920,
I want to be changed to 14900. I would like to post some code but the truth is that I´m not succeding in anything. I would appreciate some help!
Done it!
I used this:
Range("U19").Select
ActiveCell.FormulaR1C1 = "=IF(LEN(R[-12]C[-1])=5,LEFT(R[-12]C[-1],3)&""00"")+0"
I want the cell change to appear in U19. The cell containing the original number is in T7
Related
I'm trying to use IF to return a value that depends on the position of one cell relative to another in the same column.
Spreadsheet Example
If you click the above image, you'll see a number of columns with the possible values of "No," "Yes," "Yes>No," and "No>Yes."
The equation will go in the "Category of Change," row, one equation for each column. If the "Yes>No," is lower in the column than the "No>Yes," I want to return "Less Frequently," and if the opposite is true, I want to return "More Frequently" ("Same," if there is no "Yes>No," or "No>Yes").
I've tried using ARRAY and INDEX functions, but I'm not sure how to get Excel to "look" for each of those values, and then compare their ranking in the column.
Thank you in advance for your help!
MATCH will return the relative row number. This assumes the first column of data is in E2:E8.
=IFERROR(IF(MATCH("Yes>No",E2:E8,0)>MATCH("No>Yes",E2:E8,0),"Less Frequently","More Frequently"),"Same")
It is looking for exact matches, so if you have typos, it will always default to Same. If only one is found then it will still produce Same
You would put int he first cell and copy/drag over, the references will change automatically.
I would just like to say that I'm very new to VBA and more complicated formulas so all the help will be appreciated! Thank you!
To clarify a bit more with the title. I currently have a Macro that is reading a formula to give me information from another worksheet. I'll give an example of the formula that is working:
=IF(A2 = ""No Specific Program"", A2,IF(F2 = """",""No PIN"",IFERROR(VLOOKUP(CONCATENATE(A2,F2),....!$C:$I,4,FALSE),""NO DATA"")))
This is the original formula that I'm using to get the information, column A is my Parts owned by Program, And my column B is the actual Program. So when I run the Macro it does give me most of the information, but when it runs into "No Specific Program" even when there is something for Column B showing what program the part is in, it will give me No specific Program.
Also for reference the F2 it is Concatenating is a PIN number which will help determine who owns the part.
I've been stumped on this trying to get the code to work and I've tried place THEN and ELSE within the statement and it just gives a FALSE statement
EDIT:
The Code above works, it's when I use this version of the Code:
=IF(A2 = ""No Specific Program"",THEN,IF(F2 = """",""No PIN"",IFERROR(VLOOKUP(CONCATENATE(A2,F2),'.....'!$C:$I,4,FALSE),""NO DATA"",Else,IF(A2 = ""No Specific Program"",THEN,IF(F2 = """",""No PIN"",IFERROR(VLOOKUP(CONCATENATE(A2,F2),'.....'!$C:$I,4,FALSE),""NO DATA"")))))
I get the False or errors when I try different variations. Here is an example of the columns. Column A is where I have the original formula reading from, but then it says No Specific Program, while Column B shows the Program. So I'm trying to get the formula to read that as well as column A to capture all the information I need :
Columns Example
EDIT:
It starts breaking after the ELSE statement.
Edit:
=IF(A2 = ""No Specific Program"",
IF(F2 = """",""No PIN"",IFERROR(VLOOKUP(CONCATENATE(B2,F2),'\NW\Data\TechIntegration\Sustaining
Team\Data
Mining\DataMining[GAD_PIN_TABLE.xlsx]Sheet1'!$C:$I,5,FALSE),
""NO GAD
DATA"",
IF(F2 = """",""No
PIN"",IFERROR(VLOOKUP(CONCATENATE(A2,F2),'\NW\Data\TechIntegration\Sustaining
Team\Data
Mining\DataMining[GAD_PIN_TABLE.xlsx]Sheet1'!$C:$I,5,FALSE),""NO GAD
DATA"")))))
Just trying to make it easier to see the formula.
I'd split this down to make it simpler to follow, use a holding cell then refer to that in your top formula (The one you know works already)
Stick this in another column, say Z for example, then everywhere you refer to A2 in your working formula, change it to Z2
=IF(A2=""No Specific Program"",IF(B2=""No Specific Program"",""No Specific Program"",B2),A2)
This will only give you "No specific program" if both a2 and b2 contain "No specific program" which I think is what you're after. In your second example in the columns example link, it will return NG
Using Excel, lets say I have a validation list made of 5 values like this one :
Patate
Tomate
Courgette
Concombre
Patate
In a cell containing a drop down list made of these 5 value, I select the fifth value : "Patate".
I want to get in VBA that this cell contains the 5th value of my validation list. Something like :
x = Cell.Validation.GetIDValueSelected
x = 5
I can't use Vertical search because I might have 2 or even more time the same value in my list (too long to explain why).
This list is also dynamics (depending of another sheets) so it doesn't always contains 5 values.
I hope I made it clear for everyone to understand my needs but I will be glad to add more information if needed.
Thank you for your time.
Sadly, once you have used DV to fill a cell with junk, there is no way to tell which piece of junk you picked:
You would have to pad each piece of junk with a different number of blanks.
Information
I have a column of about 300 part numbers that is constantly expanding. These part numbers can be only numbers, only letters, or a combination of both. I'm using dynamic named ranges with the part numbers to fill combobox lists. When the user types in the part number in the combobox, if we've done that part before it will autofill as they keep typing. I've recently ran into a problem with this however with a recent group of parts that was added.The part number is just a six digit number, and are the only part part numbers that solely consist of numbers, every other one has letters, or if its just numbers there are hyphens in the part number. The combobox I'm filling with this named range does show these numerical part numbers in its list, but does not autofill them when the user types and does not autofill the other information associated with the part number in other textboxes when the part number is done being typed in.
Question
Can anyone help me understand why it isn't autofilling the numerical value but it fills every other value?
Code
Here is the code I'm using to fill the combobox list and the dynamic range formula. Let me know if you need anything else to help you give an answer.
=OFFSET('Part List'!$A$1,0,0,COUNTA('Part List'!$A:$A),1)
comboxPartNumber.List = Range("Part_Number").Value
List of Sample Parts
X-600-ASSY-SM
LO-5093-020-023
LO-5093-020-025
AB-1541754
764761
766415
I cannot add a comment, sice I am 2 points short :(, so I am forced to post this as a solution:
Try to make all the numbers strings.
Dim R As Range
For Each R In Range("Part_Number").Cells
If IsNumeric(R.FormulaLocal) Then R.FormulaLocal = "'" & R.FormulaLocal
Next
Let me know if it worked.
I have a cell in excel which contains a value, lets say 100000.
Now i want this value to have commas in between them to represent the thousands and millions i.e. 100,000. I can do this by changing the number format in the home menu.
Now i want this value to be copied from that cell and paste it as a label for a shape. When i am doing this the commas go away showing me just the numbers.
I want it to happen through VBA but this is not happening in excel itself.
Does anyone have a plausible solution for this?
In range object use Text property, like this:
Sheet1.Shapes(1).TextFrame.Characters.Text = Range("A1").Text