My problem is using a table variable in a exec.
declare #sort_col nvarchar(1000) = 'itm_id'
declare #sort_dir nvarchar(4) = 'desc'
declare #filters nvarchar(1000) = ' and itm_name like ''%aa%'''
declare #temp table
(
itm_id int
)
insert into #temp
EXEC('select itm_id from Tblitm where itm_name not like ''%aa%''')
EXEC('select * from (select (ROW_NUMBER() OVER (ORDER BY '+#sort_col+' '+#sort_dir+')) row_num, * FROM (select itm_id, itm_name,
dbo.fnItmsHistory(itm_id) itm_history
from dbo.Tblitm as itm
left outer join '+#temp+' as temp on itm.itm_id = temp.itm_id
where itm_id=itm_id and temp.itm_id = null '+#filters+') as x) as tmp')
It says Must declare the scalar variable "#temp" when the temp table is declared i tried using original temp table and it worked, but i had problems when trying to update my entity model.So is there any solution for this problem?
Note:
I must use exec because in filters i store string for the where clause.
Try moving the table variable inside the dynamic statement.
EXEC('
declare #temp table
(
itm_id int
)
insert into #temp
select itm_id from Tblitm where itm_name not like ''%aa%''
select * from (select (ROW_NUMBER() OVER (ORDER BY '+#sort_col+' '+#sort_dir+')) row_num, * FROM (select itm_id, itm_name,
dbo.fnItmsHistory(itm_id) itm_history
from dbo.Tblitm as itm
left outer join #temp as temp on itm.itm_id = temp.itm_id
where itm_id=itm_id and temp.itm_id = null '+#filters+') as x) as tmp')
For solution i had to use a temp table and then on the start of my stored procedure i used the if condition from the EF can't infer return schema from Stored Procedure selecting from a #temp table anwser.
It's the best solution for this scenario i think.
Related
I have a function for checking if certain tables exist in my database, using part of the table name as a key to match (my table naming conventions include unique table name prefixes). It uses a select statement as below, where #TablePrefix is a parameter to the function and contains the first few characters of the table name:
DECLARE #R bit;
SELECT #R = COUNT(X.X)
FROM (
SELECT TOP(1) 1 X FROM sys.tables WHERE [name] LIKE #TablePrefix + '%'
) AS X;
RETURN #R;
My question is, how can I extend this function to work for #temp tables too?
I have tried checking the first char of the name for # then using the same logic to select from tempdb.sys.tables, but this seems to have a fatal flaw - it returns a positive result when any temp table exists with a matching name, even if not created by the current session - and even if created by SPs in a different database. There does not seem to be any straightforward way to narrow the selection down to only those temp tables that exist in the context of the current session.
I cannot use the other method that seems universally to be suggested for checking temp tables - IF OBJECT('tempdb..#temp1') IS NOT NULL - because that requires me to know the full name of the table, not just a prefix.
create table #abc(id bit);
create table #abc_(id bit);
create table #def__(id bit);
create table #xyz___________(id bit);
go
select distinct (left(t.name, n.r)) as tblname
from tempdb.sys.tables as t with(nolock)
cross join (select top(116) row_number() over(order by(select null)) as r from sys.all_objects with(nolock)) as n
where t.name like '#%'
and object_id('tempdb..'+left(t.name, n.r)) is not null;
drop table #abc;
drop table #abc_;
drop table #def__;
drop table #xyz___________;
Try something like this:
DECLARE #TablePrefix VARCHAR(50) = '#temp';
DECLARE #R BIT, #pre VARCHAR(50) = #TablePrefix + '%';
SELECT #R = CASE LEFT ( #pre, 1 )
WHEN '#' THEN (
SELECT CASE WHEN EXISTS ( SELECT * FROM tempdb.sys.tables WHERE [name] LIKE #pre ) THEN 1
ELSE 0
END )
ELSE (
SELECT CASE WHEN EXISTS ( SELECT * FROM sys.tables WHERE [name] LIKE #pre ) THEN 1
ELSE 0
END )
END;
SELECT #R AS TableExists;
I want query field with different alias in stored procedure
select COUNT(EmpCode) as CountEmp+#para
result shoud be
CountEmp1
45
CountEmp2
54
CountEmp1
76
Query loop in c# code:
select COUNT(EmpCode) where something = #something as CountEmp+#para
Approach without dynamic SQL:
--I create temp table for demonstration
DECLARE #some_table TABLE (
Something int,
EmpCode INT
)
INSERT INTO #some_table (Something, EmpCode)
VALUES (1, 10),(1, 22),(1, 12),(2, 12),(2, 30),(3, 65),(3, 15),(3, 11),(3, 5)
--Declare parameter we want to search
DECLARE #param int = 1
--Query
--In cte we select what we need based on parameter
;WITH cte AS (
SELECT 'CountEmp'+CAST(#param as nvarchar(10)) as SomeThing,
CAST(COUNT(EmpCode) as nvarchar(10)) as EmpCodeCount,
ROW_NUMBER() OVER (ORDER BY SomeThing ) as rn
FROM #some_table
WHERE SomeThing = #param
GROUP BY SomeThing
)
--And here comes UNION
SELECT SomeThing as Result
FROM (
SELECT SomeThing,rn
FROM cte
UNION ALL
SELECT EmpCodeCount ,rn
FROM cte
) as t
ORDER BY rn, SomeThing DESC
Output:
Result
------------------
CountEmp1
3
(2 row(s) affected)
Please try to make use of below code. Its working fine with SQL Server 2012.
IF OBJECT_ID ('temp..#Mytable') IS NOT NULL
CREATE TABLE #Mytable (ID INT IDENTITY (1,1),EmpCode INT)
DECLARE #max int ,#count int
SET #max =0;
DECLARE #str varchar(10)
INSERT #Mytable
(EmpCode)
VALUES
(10),
(45),
(35),
(63),
(56),
(65)
SET #count = (SELECT COUNT (ID) FROM #Mytable )
WHILE #count > #max
BEGIN
SET #max = #max+1
SET #str = CONVERT(varchar(10),#max)
EXEC('SELECT EmpCode AS Empcode'+#str+ ' FROM #Mytable WHERE ID = '+#str)
END
I would like to create a view at the end of the following request.
I know that 'create view' must be the first statement in a query batch. My problem is that for this query i must use a variable (#listOfIDRUB).
This variable is only fill correctly at the end of my little script.
I also have tried to create the view before my first declaration but it created a problem with "DECLARE".
So is it possible to create a view easily from the result of my script or i have to do something else ?
DECLARE #CounterResId int;
DECLARE #lePath varchar(255);
DECLARE #listOfIDRUB TABLE (EXTERNALREFERENCE uniqueidentifier, ID varchar(255), DOCID varchar(255) );
DECLARE #Max int;
SET #lePath = '';
SET #CounterResId = 1;
SET #Max = (SELECT COUNT(*) FROM SYNTHETIC..EXTRANET_PURGE WHERE TYPE_SUPPR = 'ResId')
WHILE (#CounterResId <= #Max )
BEGIN;
set #lePath =
(select tmp.lePath from
(
select row_number() over(order by path)as NumLigne, CONCAT(path, '%' ) as lePath from RUBRIQUE
WHERE MODELE = 'CAEEE64D-2B00-44EF-AA11-6B72ABD9FE38'
and CODE in (SELECT ID FROM SYNTHETIC..EXTRANET_PURGE where TYPE_SUPPR='ResId')
) tmp
WHERE tmp.NumLigne = #CounterResId)
INSERT INTO #listOfIDRUB(EXTERNALREFERENCE, ID, DOCID)
SELECT SEC.EXTERNALREFERENCE , SEC.ID, SEC.DOCUMENTID
FROM WEBACCESS_FRONT..SECTIONS sec
inner join rubrique rub ON rub.ID_RUBRIQUE = sec.EXTERNALREFERENCE
inner join template_tree_item tti ON tti.id_template_tree_item = rub.modele
inner join template t ON t.id_template = tti.template
WHERE t.CODE IN (SELECT TEMPLATE_CODE from SYNTHETIC..EasyFlowEngineListTemplateCode)
and rub.path like #lePath
print #CounterResId;
print #lePath;
set #CounterResId = #CounterResId + 1;
END;
select * from #listOfIDRUB;
Instead of select * from #listOfIDRUB
i wanted create view test as select * from listOfIDRUB
I have also tried create view test as (all my request)
Whenever you ask something about SQL please state your RDBMS (product and version). The answers are highly depending on this...
From your code I assume this is SQL Server.
So to your question: No, a VIEW must be "inlineable" (single-statement or "ad-hoc") statement.
You might think about a multi-statement UDF, but this is in almost all cases a bad thing (bad performance). Only go this way, if your result table will consist of rather few rows!
Without knowing your tables this is rather blind walking, but you might try this (add parameters, if you can transfer external operations (e.g. filtering) into the function):
CREATE FUNCTION dbo.MyFunction()
RETURNS #listOfIDRUB TABLE (EXTERNALREFERENCE uniqueidentifier, ID varchar(255), DOCID varchar(255) )
AS
BEGIN
DECLARE #CounterResId int;
DECLARE #lePath varchar(255);
DECLARE #Max int;
SET #lePath = '';
SET #CounterResId = 1;
SET #Max = (SELECT COUNT(*) FROM SYNTHETIC..EXTRANET_PURGE WHERE TYPE_SUPPR = 'ResId')
WHILE (#CounterResId <= #Max )
BEGIN;
set #lePath =
(select tmp.lePath from
(
select row_number() over(order by path)as NumLigne, CONCAT(path, '%' ) as lePath from RUBRIQUE
WHERE MODELE = 'CAEEE64D-2B00-44EF-AA11-6B72ABD9FE38'
and CODE in (SELECT ID FROM SYNTHETIC..EXTRANET_PURGE where TYPE_SUPPR='ResId')
) tmp
WHERE tmp.NumLigne = #CounterResId)
INSERT INTO #listOfIDRUB(EXTERNALREFERENCE, ID, DOCID)
SELECT SEC.EXTERNALREFERENCE , SEC.ID, SEC.DOCUMENTID
FROM WEBACCESS_FRONT..SECTIONS sec
inner join rubrique rub ON rub.ID_RUBRIQUE = sec.EXTERNALREFERENCE
inner join template_tree_item tti ON tti.id_template_tree_item = rub.modele
inner join template t ON t.id_template = tti.template
WHERE t.CODE IN (SELECT TEMPLATE_CODE from SYNTHETIC..EasyFlowEngineListTemplateCode)
and rub.path like #lePath
--print #CounterResId;
--print #lePath;
set #CounterResId = #CounterResId + 1;
END;
RETURN;
END
You can call it like this (very similar to a VIEW)
SELECT * FROM dbo.MyFunction();
And you might even use it in joins...
And last but not least I'm quite sure, that one could solve this without declares and a loop too...
When I execute my code it works but my data repeats itself. The print is just to see what it gets.
DECLARE #Variable1 NVARCHAR(MAX)
DECLARE #Variable2 NVARCHAR(MAX)
DECLARE #Variable3 NVARCHAR(MAX)
CREATE TABLE #Temp1 (MAI_ID BIGINT, FUN_ID BIGINT)
CREATE TABLE #tmp2 (MAI_ID BIGINT, Variable1 NVARCHAR(MAX),Variable2 NVARCHAR(MAX), Variable3 NVARCHAR(MAX))
INSERT INTO #Temp1
SELECT TOP 10 ISD_MainID, ISNULL(ISD_FUNID,0)
FROM [dev_SAB_EM].[dbo].[SiteDetails]
ORDER BY ISD_ID DESC
DECLARE #MAI_ID BIGINT
DECLARE #FUN_ID BIGINT
WHILE (SELECT COUNT(MAI_ID) FROM #Temp1) <> 0
BEGIN
SELECT TOP 1 #MAI_ID = MAI_ID, #FUN_ID = FUN_ID FROM #Temp1
PRINT #MAI_ID
PRINT #FUN_ID
SELECT #Variable1 = ISNULL(FUN_Name,'') FROM [dev_SAB_Man].[dbo].[fx_GetFUNStructureCTE_Asc] (#FUN_ID) WHERE FUN_Level = 1
SELECT #Variable2 = ISNULL(FUN_Name,'') FROM [dev_SAB_Man].[dbo].[fx_GetFUNStructureCTE_Asc] (#FUN_ID) WHERE FUN_Level = 2
SELECT #Variable3 = ISNULL(FUN_Name,'') FROM [dev_SAB_Man].[dbo].[fx_GetFUNStructureCTE_Asc] (#FUN_ID) WHERE FUN_Level = 3
INSERT INTO #tmp2(MAI_ID, Variable1, Variable2, Variable3)
SELECT #MAI_ID, #Variable1, #Variable2, #Variable3
DELETE FROM #Temp1 WHERE MAI_ID = #MAI_ID AND FUN_ID = #FUN_ID
END
SELECT * FROM #tmp2
DROP TABLE #Temp1
DROP TABLE #tmp2
fx_GetFUNStructureCTE_Asc
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[fx_GetFUNStructureCTE_Asc] (#param_FUNID int)
RETURNS #FUN_Names table
(
[Level_Label] nvarchar(255),
[FUN_Name] nvarchar(255),
[FUN_Level] int,
[FUN_ID] int
)
AS
BEGIN
with cte([Level_Label],[FUN_Name],[FUN_Level],[FUN_ID],[FUN_FUNID]) as
(
select ful1.FUL_Name,fu1.FUN_Name,fu1.FUN_Level,fu1.FUN_ID,fu1.FUN_FUNID
from FunctionalUnits fu1
inner join FunctionalUnitLevels ful1 on ful1.FUL_Level=fu1.FUN_Level
where fu1.FUN_ID=#param_FUNID
union all
select ful2.FUL_Name,fu2.FUN_Name,fu2.FUN_Level,fu2.FUN_ID,fu2.FUN_FUNID
from FunctionalUnits fu2
inner join FunctionalUnitLevels ful2 on ful2.FUL_Level=fu2.FUN_Level
inner join CTE a on a.FUN_FUNID=fu2.FUN_ID
)
insert into #FUN_Names
([Level_Label],[FUN_Name],[FUN_Level],[FUN_ID])
(select [Level_Label],[FUN_Name],[FUN_Level],[FUN_ID] from cte
where exists (select FUA_isActive from FunctionalUnitsActive where FUA_isActive=1))
return
RETURN
END
GO
Any suggestions or anything that can hep me?
Ok I've added fx_GetFUNStructureCTE_Asc
Considering the informations you gave, besides what #Lamak said, it also may depend on what the the field ISD_FUNID values has on [dev_SAB_EM].[dbo].[SiteDetails] table. If they are all the same on every record then there's no problem with your code...
But, it's a basic assumption...
And, assuming what you said on your comment as the value of ISD_FUNID being NULL, what may be happening is this: when all the value of the field FUN_ID are 0 on table #Temp1 what will happen when you execute the query on the function [dev_SAB_Man].[dbo].[fx_GetFUNStructureCTE_Asc] is that all rows will loop while the assignment occurs, setting the variables values to the last one returned by the function.
It'll make all the variables values be the same for all #tmp2 rows. You may need to improve the function call to return just one value.
Consider a column named EmployeeName table Employee. The goal is to delete repeated records, based on the EmployeeName field.
EmployeeName
------------
Anand
Anand
Anil
Dipak
Anil
Dipak
Dipak
Anil
Using one query, I want to delete the records which are repeated.
How can this be done with TSQL in SQL Server?
You can do this with window functions. It will order the dupes by empId, and delete all but the first one.
delete x from (
select *, rn=row_number() over (partition by EmployeeName order by empId)
from Employee
) x
where rn > 1;
Run it as a select to see what would be deleted:
select *
from (
select *, rn=row_number() over (partition by EmployeeName order by empId)
from Employee
) x
where rn > 1;
Assuming that your Employee table also has a unique column (ID in the example below), the following will work:
delete from Employee
where ID not in
(
select min(ID)
from Employee
group by EmployeeName
);
This will leave the version with the lowest ID in the table.
Edit
Re McGyver's comment - as of SQL 2012
MIN can be used with numeric, char, varchar, uniqueidentifier, or datetime columns, but not with bit columns
For 2008 R2 and earlier,
MIN can be used with numeric, char, varchar, or datetime columns, but not with bit columns (and it also doesn't work with GUID's)
For 2008R2 you'll need to cast the GUID to a type supported by MIN, e.g.
delete from GuidEmployees
where CAST(ID AS binary(16)) not in
(
select min(CAST(ID AS binary(16)))
from GuidEmployees
group by EmployeeName
);
SqlFiddle for various types in Sql 2008
SqlFiddle for various types in Sql 2012
You could try something like the following:
delete T1
from MyTable T1, MyTable T2
where T1.dupField = T2.dupField
and T1.uniqueField > T2.uniqueField
(this assumes that you have an integer based unique field)
Personally though I'd say you were better off trying to correct the fact that duplicate entries are being added to the database before it occurs rather than as a post fix-it operation.
DELETE
FROM MyTable
WHERE ID NOT IN (
SELECT MAX(ID)
FROM MyTable
GROUP BY DuplicateColumn1, DuplicateColumn2, DuplicateColumn3)
WITH TempUsers (FirstName, LastName, duplicateRecordCount)
AS
(
SELECT FirstName, LastName,
ROW_NUMBER() OVER (PARTITIONBY FirstName, LastName ORDERBY FirstName) AS duplicateRecordCount
FROM dbo.Users
)
DELETE
FROM TempUsers
WHERE duplicateRecordCount > 1
WITH CTE AS
(
SELECT EmployeeName,
ROW_NUMBER() OVER(PARTITION BY EmployeeName ORDER BY EmployeeName) AS R
FROM employee_table
)
DELETE CTE WHERE R > 1;
The magic of common table expressions.
Try
DELETE
FROM employee
WHERE rowid NOT IN (SELECT MAX(rowid) FROM employee
GROUP BY EmployeeName);
If you're looking for a way to remove duplicates, yet you have a foreign key pointing to the table with duplicates, you could take the following approach using a slow yet effective cursor.
It will relocate the duplicate keys on the foreign key table.
create table #properOlvChangeCodes(
id int not null,
name nvarchar(max) not null
)
DECLARE #name VARCHAR(MAX);
DECLARE #id INT;
DECLARE #newid INT;
DECLARE #oldid INT;
DECLARE OLVTRCCursor CURSOR FOR SELECT id, name FROM Sales_OrderLineVersionChangeReasonCode;
OPEN OLVTRCCursor;
FETCH NEXT FROM OLVTRCCursor INTO #id, #name;
WHILE ##FETCH_STATUS = 0
BEGIN
-- determine if it should be replaced (is already in temptable with name)
if(exists(select * from #properOlvChangeCodes where Name=#name)) begin
-- if it is, finds its id
Select top 1 #newid = id
from Sales_OrderLineVersionChangeReasonCode
where Name = #name
-- replace terminationreasoncodeid in olv for the new terminationreasoncodeid
update Sales_OrderLineVersion set ChangeReasonCodeId = #newid where ChangeReasonCodeId = #id
-- delete the record from the terminationreasoncode
delete from Sales_OrderLineVersionChangeReasonCode where Id = #id
end else begin
-- insert into temp table if new
insert into #properOlvChangeCodes(Id, name)
values(#id, #name)
end
FETCH NEXT FROM OLVTRCCursor INTO #id, #name;
END;
CLOSE OLVTRCCursor;
DEALLOCATE OLVTRCCursor;
drop table #properOlvChangeCodes
delete from person
where ID not in
(
select t.id from
(select min(ID) as id from person
group by email
) as t
);
Please see the below way of deletion too.
Declare #Employee table (EmployeeName varchar(10))
Insert into #Employee values
('Anand'),('Anand'),('Anil'),('Dipak'),
('Anil'),('Dipak'),('Dipak'),('Anil')
Select * from #Employee
Created a sample table named #Employee and loaded it with given data.
Delete aliasName from (
Select *,
ROW_NUMBER() over (Partition by EmployeeName order by EmployeeName) as rowNumber
From #Employee) aliasName
Where rowNumber > 1
Select * from #Employee
Result:
I know, this is asked six years ago, posting just incase it is helpful for anyone.
Here's a nice way of deduplicating records in a table that has an identity column based on a desired primary key that you can define at runtime. Before I start I'll populate a sample data set to work with using the following code:
if exists (select 1 from sys.all_objects where type='u' and name='_original')
drop table _original
declare #startyear int = 2017
declare #endyear int = 2018
declare #iterator int = 1
declare #income money = cast((SELECT round(RAND()*(5000-4990)+4990 , 2)) as money)
declare #salesrepid int = cast(floor(rand()*(9100-9000)+9000) as varchar(4))
create table #original (rowid int identity, monthyear varchar(max), salesrepid int, sale money)
while #iterator<=50000 begin
insert #original
select (Select cast(floor(rand()*(#endyear-#startyear)+#startyear) as varchar(4))+'-'+ cast(floor(rand()*(13-1)+1) as varchar(2)) ), #salesrepid , #income
set #salesrepid = cast(floor(rand()*(9100-9000)+9000) as varchar(4))
set #income = cast((SELECT round(RAND()*(5000-4990)+4990 , 2)) as money)
set #iterator=#iterator+1
end
update #original
set monthyear=replace(monthyear, '-', '-0') where len(monthyear)=6
select * into _original from #original
Next I'll create a Type called ColumnNames:
create type ColumnNames AS table
(Columnnames varchar(max))
Finally I will create a stored proc with the following 3 caveats:
1. The proc will take a required parameter #tablename that defines the name of the table you are deleting from in your database.
2. The proc has an optional parameter #columns that you can use to define the fields that make up the desired primary key that you are deleting against. If this field is left blank, it is assumed that all the fields besides the identity column make up the desired primary key.
3. When duplicate records are deleted, the record with the lowest value in it's identity column will be maintained.
Here is my delete_dupes stored proc:
create proc delete_dupes (#tablename varchar(max), #columns columnnames readonly)
as
begin
declare #table table (iterator int, name varchar(max), is_identity int)
declare #tablepartition table (idx int identity, type varchar(max), value varchar(max))
declare #partitionby varchar(max)
declare #iterator int= 1
if exists (select 1 from #columns) begin
declare #columns1 table (iterator int, columnnames varchar(max))
insert #columns1
select 1, columnnames from #columns
set #partitionby = (select distinct
substring((Select ', '+t1.columnnames
From #columns1 t1
Where T1.iterator = T2.iterator
ORDER BY T1.iterator
For XML PATH ('')),2, 1000) partition
From #columns1 T2 )
end
insert #table
select 1, a.name, is_identity from sys.all_columns a join sys.all_objects b on a.object_id=b.object_id
where b.name = #tablename
declare #identity varchar(max)= (select name from #table where is_identity=1)
while #iterator>=0 begin
insert #tablepartition
Select distinct case when #iterator=1 then 'order by' else 'over (partition by' end ,
substring((Select ', '+t1.name
From #table t1
Where T1.iterator = T2.iterator and is_identity=#iterator
ORDER BY T1.iterator
For XML PATH ('')),2, 5000) partition
From #table T2
set #iterator=#iterator-1
end
declare #originalpartition varchar(max)
if #partitionby is null begin
select #originalpartition = replace(b.value+','+a.type+a.value ,'over (partition by','') from #tablepartition a cross join #tablepartition b where a.idx=2 and b.idx=1
select #partitionby = a.type+a.value+' '+b.type+a.value+','+b.value+') rownum' from #tablepartition a cross join #tablepartition b where a.idx=2 and b.idx=1
end
else
begin
select #originalpartition=b.value +','+ #partitionby from #tablepartition a cross join #tablepartition b where a.idx=2 and b.idx=1
set #partitionby = (select 'OVER (partition by'+ #partitionby + ' ORDER BY'+ #partitionby + ','+b.value +') rownum'
from #tablepartition a cross join #tablepartition b where a.idx=2 and b.idx=1)
end
exec('select row_number() ' + #partitionby +', '+#originalpartition+' into ##temp from '+ #tablename+'')
exec(
'delete a from _original a
left join ##temp b on a.'+#identity+'=b.'+#identity+' and rownum=1
where b.rownum is null')
drop table ##temp
end
Once this is complied, you can delete all your duplicate records by running the proc. To delete dupes without defining a desired primary key use this call:
exec delete_dupes '_original'
To delete dupes based on a defined desired primary key use this call:
declare #table1 as columnnames
insert #table1
values ('salesrepid'),('sale')
exec delete_dupes '_original' , #table1