I have got a ssis package which runs when I manually run from Integration Services. But when I try to run it from a job. Then it runs but no data is seen in the data. There seems to be some permission issue. Can somebody tell me what permissions are required for running a package from a SQL Server Job?
State the error message.
If you are using a flat file connection manager, and that's where the error is occurring, click 'start' then 'computer' then check to make sure you are mapped to that drive. If not, click the tab upper right corner to map to the drive then when you access the file through SSIS you shouldn't have an error.
If the package runs successfully as a job using the SQL Server Agent then you have the permissions set right for the database side.
However make sure if you are accessing any external data such as flat files that the agent is able to access these locations. You may have permissions on your Windows account to access the locations when you run the package in Visual Studio but the agent service running the job requires those permissions too.
If this is not the case can you clarify what your package does and any messages you receive from the catalog reports so I can help further.
Related
SSIS Job was able to run and create CSV files to shared location until last week when it was executed from scheduled job. The ssis package reports success but does not write file to shared location. When I run the package manually from visual studio it works fine. Please help
Permissions to the file share seem to be your issue.
When running the package as a scheduled job from SQL Agent. It is executed under the context of the service account for the SQL Agent Service. So make sure the the sql agent account has the appropriate read/write access to the file share, and/or set the job to execute as a user with enough permissions.
You need to give Modify permissions to the file share for the SQL Server Agent account. Executing an SSIS package in Visual Studio is executing it under the context of your account (or the account that you are logged onto the server with if doing it from a server). But when you use SQL jobs to execute the ssis package, then it runs under the context of the service account that SQL Server Agent is running under.
I'm working on SQL 2012 Enterprise and I have a set of SSIS package exports which push data out to text files on a shared network folder. The packages aren't complex and under most circumstances they work perfectly. The problem I'm facing is that they do not work when scheduled - despite reporting that they have succeded.
Let me explain the scenarios;
1) When run manually from within BIDS, they work correctly, txt files are created and populated with data.
2) When deployed to the SSISDB and run from the Agent job they also work as expected - files are created and populate with data.
3) When the Agent job is scheduled to run in the evening, the job runs and reports success. The files are created but the data is not populated.
I've checked the reports on the Integration Services Catalogs and compared the messages line by line from the OnInformation. Both runs reports that the Flat File Destination wrote xxxx rows.
The data is there, the Agent account has the correct access. I cannot fathom why the job works when started manually, but behaves differently when scheduled.
Has anyone seen anything similar? It feels like a very strange bug....
Kind Regards,
James
Make sure that the account you have set up as the proxy for the SSIS task has read/write access to the file.
IMX, when you run an SQL Agent job manually, it appears to use the context of the user who initiates it in some way. I always assumed it was a side effect of impersonation. It's only when it actually runs with the schedule that everything uses the assigned security rights.
Additionally, I think when the user starts the job, the user is impersonating the proxy, but when the job is run via the schedule, the agent's account is impersonating the proxy. Make sure the service account has the right to impersonate the proxy. Take a look at sp_grant_login_to_proxy and sp_enum_login_for_proxy.
Here's a link that roughly goes through the process:
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
I also recall this video being useful:
http://msdn.microsoft.com/en-us/library/dd440761(v=SQL.100).aspx
I had the same problem with Excel files. It was permission rights.
What worked for me was adding the SERVICE account to the folder's security tab. Then the SQL Agent can access the files.
I am trying to move all .zip in a specific folder to another folder. the source folder is located on another server, currently i am using
EXECUTE xp_cmdshell 'copy \\server1\e$\ETL\*.zip \\server2\e$\ETL\'
GO
Which is working if I am logged into both server, but the goal is to automate this process VIA sql server job agent. I have tried
EXECUTE sp_xp_cmdshell_proxy_account 'domain\useracc','pass'
GO
EXECUTE xp_cmdshell 'copy \\server1\e$\ETL\*.zip \\server2\e$\ETL\'
GO
but I am receiving the following error;
An error occurred during the execution of sp_xp_cmdshell_proxy_account. Possible reasons: the provided account was invalid or the '##xp_cmdshell_proxy_account##' credential could not be created. Error code: '0'.
And also not sure if this is my solution. Please help with how I can achieve this. The file names on server1 change name and quantity everyday.
I would strongly advise...Do not use xp_cmdshell. It opens up large security wholes in your surface area and makes you vulnerable to attack. xp_cmdshell should be disabled!
Instead, if you want to automate this with server agent you have 2 options. My preference would be to write a simple SSIS package with a file system task and schedule this package with server agent. SSIS is underutilized for this kind of task but is actually pretty good at it.
Alternatively re-write your script to use Server Agent CmdExec job steps. This does not require xp_cmdshell to be enabled and reduces the attack surface.
I Found that the following worked for me;
In the command prompt, type services.msc, this would open the list of all services on the server.
In the list of services, look for SQL Server Agent, Right Click -> Properties. Go to Logon Tab
Change the logon to a user with access on both servers. then re-write your script to use Server Agent CmdExec job steps(Thank you Pete Carter)
I have an SSIS package that transfers some tables to CSV files on a network drive; it runs fine from my computer manually. I store it on the server in the MSDB database and execute it from there and it runs fine, but when I create a job that has one step that runs the SSIS package from MSDB it fails saying it can't find the CSV file name.
I spent all day yesterday figuring out this means a permissions issue with whatever logon credentials are being used through the job. The job owner shows to be domain/myuserid and step properties show they are using windows authentication with my username. The problem is, I know I have access to this folder.
The first line of the error log says: "Executed as user: servername\SYSTEM". So I made sure user "SYSTEM" has access to the network folder I want to load the files on, but I still get the same error.
The command line looks like #command=N'/SQL "\SSIS package name" /SERVER servername /CHECKPOINTING OFF /REPORTING E'
edit: I found SQL Server agent job account issue where someone asks who the job is run under and marc_s says "I can't seem to find any definitive answers on that one, really. Since my Jobs typically select and update stuff in the database, I am lead to assume that the "Owner" account will be used by default, unless you specify some other account on a given step"
Which also leads me to believe it is using my logon information that has access
The best practice that we've been able to come up with here is to make a domain account for SSIS and then set up a Proxy in SQL Server that is used to run the SSIS Package in a SQL Job.
I would say that the servername\SYSTEM account is a local account, and therefore won't have access to network folders on other servers.
You probably want to run this as a domain account of some sort, which does have access.
Typically this will be the SQL Server Agent, so check in the Services list, in the control panel, and see what account is running the agent, and if necessary change it to the appropriate account.
This may have knock on consequences though, so be careful what other jobs are running.
I have a SSIS package (exports some database tables --> CSV file)
After creation of this package, I can run the package
from Visual Studio or just by clicking it.
But it fails if i add to execute this package as a SQL Agent Job scheduled at some arbitrary time of a day.
Pointers needed if i have to configure anything related to Permissions/Command line args ??
Thanks in advance
You don't give details of the error message received when the package is run by the Agent, but you need to check the rights of the Windows account under which the SQL Server Agent is running.
If all the package does is export database tables to text files you need to check that the service account has rights to:
connect to the database and run
select statements on the source
tables (if you are using Windows
Authentication to control the
database connection).
Create files
in the target location(s) in the
file system.
The windows account under which my SQL Server Agent runs belongs to sysadmin
Also the same user has admin privileges in my system to access the folders while exporting to the csv file.
The error message in the Job history :
Executed as user: MymachineName\JOBUSER. The package execution failed. The step failed.
In the step i have the SSIS Package included, with correct datasource connections,
Run as : SQL Agent Service Account (this is also run under MymachineName\JOBUSER user)