I am trying to write a query for an inventory system. In order to do this I have to count the number of duplicates in one table and then compare it to the default quantity values taken from another table.
Here are two queries which I am working with currently:
SELECT Template_ID,
COUNT(Template_ID) AS Howmuch, t.name
FROM consumables e, templates t
Where t.consumable_type_id = '2410980'
GROUP BY template_id, t.name
HAVING ( COUNT(Template_ID) > 1 )
The query above takes account of each unique Template Id and gives me a count of how many duplicates are present which tells me the amount of a single substance.
Select
property_descriptors.default_value,
templates.name
From
templates,
Property_descriptors
Where
templates.consumable_type_id = '858190' And
templates.audit_id = property_descriptors.audit_id And
property_descriptors.name = 'Reorder Point'
This query finds the amount of each individual substance we would like to have in our system.
My Issue is that I dont know of a way to compare the results from the 2 queries.
Ideally, I want the query to only give the substance which have a duplicate count lower than their default value (found using query 2).
any ideas would be appreciated!
here is the table schema for reference:
Consumables
ID|Template_ID|
Templates
ID|Property_Descriptor_ID|Name|audit_id
Property_Descriptors
ID| Name|Default_Value|audit_id
Thanks!
SELECT q1.name, q2.default_value - q1.Howmuch FROM
(SELECT Template_ID, COUNT(Template_ID) AS Howmuch, t.name
FROM consumables e, templates t
Where t.consumable_type_id = '2410980'
GROUP BY template_id, t.name
HAVING ( COUNT(Template_ID) > 1 )) q1,
(SELECT property_descriptors.default_value default_value,
templates.name name
FROM
templates,
Property_descriptors
WHERE
templates.consumable_type_id = '858190' And
templates.audit_id = property_descriptors.audit_id And
property_descriptors.name = 'Reorder Point') q2
where q1.name = q2.name
should do the trick you'll need to clean up the result a bit to work away negative results
or add q2.default_value - q1.Howmuch > 0 in the outer WHERE clause
Related
I have a table named Ticket Numbers, which (for this example) contain the columns:
Ticket_Number
Assigned_Group
Assigned_Group_Sequence_No
Reported_Date
Each ticket number could contain 4 rows, depending on how many times the ticket changed assigned groups. Some of these rows could contain an assigned group of "Desktop Support," but some may not. Here is an example:
Example of raw data
What I am trying to accomplish is to get the an output that contains any ticket numbers that contain 'Desktop Support', but also the assigned group of the max sequence number. Here is what I am trying to accomplish with SQL:
Queried Data
I'm trying to use SQL with the following query but have no clue what I'm doing wrong:
select ih.incident_number,ih.assigned_group, incident_history2.maxseq, incident_history2.assigned_group
from incident_history_public as ih
left join
(
select max(assigned_group_seq_no) maxseq, incident_number, assigned_group
from incident_history_public
group by incident_number, assigned_group
) incident_history2
on ih.incident_number = incident_history2.incident_number
and ih.assigned_group_seq_no = incident_history2.maxseq
where ih.ASSIGNED_GROUP LIKE '%DS%'
Does anyone know what I am doing wrong?
You might want to create a proper alias for incident_history. e.g.
from incident_history as incident_history1
and
on incident_history1.ticket_number = incident_history2.ticket_number
and incident_history1.assigned_group_seq_no = incident_history2.maxseq
In my humble opinion a first error could be that I don't see any column named "incident_history2.assigned_group".
I would try to use common table expression, to get only ticket number that contains "Desktop_support":
WITH desktop as (
SELECT distinct Ticket_Number
FROM incident_history
WHERE Assigned_Group = "Desktop Support"
),
Than an Inner Join of the result with your inner table to get ticket number and maxSeq, so in a second moment you can get also the "MAXGroup":
WITH tmp AS (
SELECT i2.Ticket_Number, i2.maxseq
FROM desktop D inner join
(SELECT Ticket_number, max(assigned_group_seq_no) as maxseq
FROM incident_history
GROUP BY ticket_number) as i2
ON D.Ticket_Number = i2.Ticket_Number
)
SELECT i.Ticket_Number, i.Assigned_Group as MAX_Group, T.maxseq, i.Reported_Date
FROM tmp T inner join incident_history i
ON T.Ticket_Number = i.Ticket_Number and i.assigned_group_seq_no = T.maxseq
I think there are several different method to resolve this question, but I really hope it's helpful for you!
For more information about Common Table Expression: https://www.essentialsql.com/introduction-common-table-expressions-ctes/
I have the following query:
SELECT DISTINCT
CAB.CODPARC,
PAR.RAZAOSOCIAL,
BAI.NOMEBAI,
SUM(VLRNOTA) AS AMOUNT
FROM TGFCAB CAB, TGFPAR PAR, TSIBAI BAI
WHERE CAB.CODPARC = PAR.CODPARC
AND PAR.CODBAI = BAI.CODBAI
AND CAB.TIPMOV = 'V'
AND STATUSNOTA = 'L'
AND PAR.CODCID = 5358
GROUP BY
CAB.CODPARC,
PAR.RAZAOSOCIAL,
BAI.NOMEBAI
Which the result is this. Company names and neighborhood hid for obvious reasons
The query at the moment, for those who don't understand Latin languages, is giving me clients, company name, company neighborhood, and the total value of movements.
in the WHERE clause it is only filtering sales movements of companies from an established city.
But if you notice in the Select statement, the column that is retuning the value that aggregates the total amount of value of sales is a SUM().
My goal is to return only the company that have the maximum value of this column, if its a tie, display both of em.
This is where i'm struggling, cause i can't seem to find a simple solution. I tried to use
WHERE AMOUNT = MAX(AMOUNT)
But as expected it didn't work
You tagged the question with the whole bunch of different databases; do you really use all of them?
Because, "PL/SQL" reads as "Oracle". If that's so, here's one option.
with temp as
-- this is your current query
(select columns,
sum(vrlnota) as amount
from ...
where ...
)
-- query that returns what you asked for
select *
from temp t
where t.amount = (select max(a.amount)
from temp a
);
You should be able to achieve the same without the need for a subquery using window over() function,
WITH T AS (
SELECT
CAB.CODPARC,
PAR.RAZAOSOCIAL,
BAI.NOMEBAI,
SUM(VLRNOTA) AS AMOUNT,
MAX(VLRNOTA) over() AS MAMOUNT
FROM TGFCAB CAB
JOIN TGFPAR PAR ON PAR.CODPARC = CAB.CODPARC
JOIN TSIBAI BAI ON BAI.CODBAI = PAR.CODBAI
WHERE CAB.TIPMOV = 'V'
AND STATUSNOTA = 'L'
AND PAR.CODCID = 5358
GROUP BY CAB.CODPARC, PAR.RAZAOSOCIAL, BAI.NOMEBAI
)
SELECT CODPARC, RAZAOSOCIAL, NOMEBAI, AMOUNT
FROM T
WHERE AMOUNT=MAMOUNT
Note it's usually (always) beneficial to join tables using clear explicit join syntax. This should be fine cross-platform between Oracle & SQL Server.
I need to get a state level count on number of services. For the purposes of this I only have two services. The first column is the states, the second column is the first services and the third column is the second service. What I am struggling with is to have the second and third column show up on the results in one query. Here is my code:
SELECT Distinct allstates.Name, count (data.StateName) as CareCase_Management_Services, count(data.StateName) Caregiver_Support_Services
From
(select distinct Name from USstate) allstates
Left Join
Client2017 data
on
allstates.Name = data.StateName and
data.FiscalYear = 2017 and
data.SrvstartCareCaseMgmtCode NOT IN('999','', '998') and
data.SrvstartCaregiverSuppCode NOT IN('999','', '998')
GROUP BY allstates.Name
ORDER BY allstates.Name ASC
I understand that you are looking to compute, for each state, the count of services that match certain criteria. There are two types of services, stored in two different columns.
If so, your query could be simplified using conditional aggregation :
SELECT
allstates.Name,
SUM(CASE WHEN c.SrvstartCareCaseMgmtCode NOT IN ('999', '', '998') THEN 1 ELSE 0 END) CareCase_Management_Services,
SUM(CASE WHEN c.SrvstartCaregiverSuppCode NOT IN ('999', '', '998') THEN 1 ELSE 0 END) Caregiver_Support_Services
FROM
(SELECT DISTINCT Name FROM USstate) s
LEFT JOIN Client2017 c ON s.Name = c.StateName AND c.FiscalYear = 2017
GROUP BY allstates.Name
With this technique, each service is counted according to its own logic ; when conditions are met, the record is counted in (1 is added to the SUM()), else it is ignored (+ 0).
NB : do you really have duplicated state names in USstate ? if no, you can replace subquery (SELECT DISTINCT Name FROM USstate) s with just USstate
The database is Postgres but any SQL logic should help.
I am retrieving the set of sales quotations that contain a given product within the bill of materials. I'm doing that in two steps: step 1, retrieve all DISTINCT quote numbers which contain a given product (by product number).
The second step, retrieve the full quote, with all products listed for each unique quote number.
So far, so good. Now the tough bit. Some rows are duplicates, some are not. Those that are duplicates (quote number & quote version & line number) might or might not have maintenance on them. I want to pick the row that has maintenance greater than 0. The duplicate rows I want to exclude are those that have a 0 maintenance. The problem is that some rows, which have no duplicates, have 0 maintenance, so I can't just filter on maintenance.
To make this exciting, the database holds quotes over 20+ years. And the data scientists guys have just admitted that maybe the ETL process has some bugs...
--- step 0
--- cleanup the workspace
SET CLIENT_ENCODING TO 'UTF8';
DROP TABLE IF EXISTS product_quotes;
--- step 1
--- get list of Product Quotes
CREATE TEMPORARY TABLE product_quotes AS (
SELECT DISTINCT master_quote_number
FROM w_quote_line_d
WHERE item_number IN ( << model numbers >> )
);
--- step 2
--- Now join on that list
SELECT
d.quote_line_number,
d.item_number,
d.item_description,
d.item_quantity,
d.unit_of_measure,
f.ref_list_price_amount,
f.quote_amount_entered,
f.negtd_discount,
--- need to calculate discount rate based on list price and negtd discount (%)
CASE
WHEN ref_list_price_amount > 0
THEN 100 - (ref_list_price_amount + negtd_discount) / ref_list_price_amount *100
ELSE 0
END AS discount_percent,
f.warranty_months,
f.master_quote_number,
f.quote_version_number,
f.maintenance_months,
f.territory_wid,
f.district_wid,
f.sales_rep_wid,
f.sales_organization_wid,
f.install_at_customer_wid,
f.ship_to_customer_wid,
f.bill_to_customer_wid,
f.sold_to_customer_wid,
d.net_value,
d.deal_score,
f.transaction_date,
f.reporting_date
FROM w_quote_line_d d
INNER JOIN product_quotes pq ON (pq.master_quote_number = d.master_quote_number)
INNER JOIN w_quote_f f ON
(f.quote_line_number = d.quote_line_number
AND f.master_quote_number = d.master_quote_number
AND f.quote_version_number = d.quote_version_number)
WHERE d.net_value >= 0 AND item_quantity > 0
ORDER BY f.master_quote_number, f.quote_version_number, d.quote_line_number
The logic to filter the duplicate rows is like this:
For each master_quote_number / version_number pair, check to see if there are duplicate line numbers. If so, pick the one with maintenance > 0.
Even in a CASE statement, I'm not sure how to write that.
Thoughts? The database is Postgres but any SQL logic should help.
I think you will want to use Window Functions. They are, in a word, awesome.
Here is a query that would "dedupe" based on your criteria:
select *
from (
select
* -- simplifying here to show the important parts
,row_number() over (
partition by master_quote_number, version_number
order by maintenance desc) as seqnum
from w_quote_line_d d
inner join product_quotes pq
on (pq.master_quote_number = d.master_quote_number)
inner join w_quote_f f
on (f.quote_line_number = d.quote_line_number
and f.master_quote_number = d.master_quote_number
and f.quote_version_number = d.quote_version_number)
) x
where seqnum = 1
The use of row_number() and the chosen partition by and order by criteria guarantee that only ONE row for each combination of quote_number/version_number will get the value of 1, and it will be the one with the highest value in maintenance (if your colleagues are right, there would only be one with a value > 0 anyway).
Can you do something like...
select
*
from
w_quote_line_d d
inner join
(
select
...
,max(maintenance)
from
w_quote_line_d
group by
...
) d1
on
d1.id = d.id
and d1.maintenance = d.maintenance;
Am I understanding your problem correctly?
Edit: Forgot the group by!
I'm not sure, but maybe you could Group By all other columns and use MAX(Maintenance) to get only the greatest.
What do you think?
Hi I have a redshift table of articles that has a field on it that can contain many accounts. So there is a one to many relationship between articles to accounts.
However I want to create a new view where it lists the partner id's in one column and in another column a count of how many times the partner id appears in the articles table.
I've attempted to do this using regex and created a new redshift view, but am getting weird results where it doesn't always build properly. So one day it will say a partner appears 15 times, then the next 17, then the next 15, when the partner id count hasn't actually changed.
Any help would be greatly appreciated.
SELECT partner_id,
COUNT(DISTINCT id)
FROM (SELECT id,
partner_ids,
SPLIT_PART(partner_ids,',',i) partner_id
FROM positron_articles a
LEFT JOIN util.seq_0_to_500 s
ON s.i < regexp_count (partner_ids,',') + 2
OR s.i = 1
WHERE i > 0
AND regexp_count (partner_ids,',') = 0
ORDER BY id)
GROUP BY 1;
Let's start with some of the more obvious things and see if we can start to glean other information.
Next GROUP BY 1 on your outer query needs to be GROUP BY partner_id.
Next you don't need an order by in your INNER query and the database engine will probably do a better job optimizing performance without it so remove ORDER BY id.
If you want your final results to be ordered then add an ORDER BY partner_id or similar clause after your group by of your OUTER query.
It looks like there are also problems with how you are splitting a partnerid from partnerids but I am not positive about that because I need to understand your view and the data it provides to know how that affects your record count for partnerid.
Next your LEFT JOIN statement on the util.seq_0_to_500 I am pretty sure you can drop off the s.i = 1 as the first condition will satisfy that as well because 2 is greater than 1. However your left join really acts more like an inner join because you then exclude any non matches from positron_articles that don't have a s.i > 0.
Oddly then your entire join and inner query gets kind of discarded because you only want articles that have no commas in their partnerids: regexp_count (partner_ids,',') = 0
I would suggest posting the code for your util.seq_0_to_500 and if you have a partner table let use know about that as well because you can probably get your answer a lot easier with that additional table depending on how regexp_count works. I suspect regex_count(partnerids,partnerid) exampleregex_count('12345,678',1234) will return greater than 0 at which point you have no choice but to split the delimited strings into another table before counting or building a new matching function.
If regex_count only matches exact between commas and you have a partner table your query could be as easy as this:
SELECT
p.partner_id
,COUNT(a.id) AS ArticlesAppearedIn
FROM
positron_articles a
LEFT JOIN PARTNERTABLE p
ON regexp_count(a.partnerids,p.partnerid) > 0
GROUP BY
p.partner_id
I will actually correct myself as I just thought of a way to join a partner table without regexp_count. So if you have a partner table this might work for you. If not you will need to split strings. It basically tests to see if the partnerid is the entire partnerids, at the beginning, in the middle, or at the end of partnerids. If one of those is met then the records is returned.
SELECT
p.partner_id
,COUNT(a.id) AS ArticlesAppearedIn
FROM
PARTNERTABLE p
INNER JOIN positron_articles a
ON
(
CASE
WHEN a.partnerids = CAST(p.partnerid AS VARCHAR(100)) THEN 1
WHEN a.partnerids LIKE p.partnerid + ',%' THEN 1
WHEN a.partnerids LIKE '%,' + p.partnerid + ',%' THEN 1
WHEN a.partnerids LIKE '%,' + p.partnerid THEN 1
ELSE 0
END
) = 1
GROUP BY
p.partner_id