SQL Server select max(id) given other conditions in where clause [duplicate] - sql

Question

I have a table which I want to get the latest entry for each group. Here's the table:
DocumentStatusLogs Table
|ID| DocumentID | Status | DateCreated |
| 2| 1 | S1 | 7/29/2011 |
| 3| 1 | S2 | 7/30/2011 |
| 6| 1 | S1 | 8/02/2011 |
| 1| 2 | S1 | 7/28/2011 |
| 4| 2 | S2 | 7/30/2011 |
| 5| 2 | S3 | 8/01/2011 |
| 6| 3 | S1 | 8/02/2011 |
The table will be grouped by DocumentID and sorted by DateCreated in descending order. For each DocumentID, I want to get the latest status.
My preferred output:
| DocumentID | Status | DateCreated |
| 1 | S1 | 8/02/2011 |
| 2 | S3 | 8/01/2011 |
| 3 | S1 | 8/02/2011 |
Is there any aggregate function to get only the top from each group? See pseudo-code GetOnlyTheTop below:
SELECT
DocumentID,
GetOnlyTheTop(Status),
GetOnlyTheTop(DateCreated)
FROM DocumentStatusLogs
GROUP BY DocumentID
ORDER BY DateCreated DESC
If such function doesn't exist, is there any way I can achieve the output I want?
Or at the first place, could this be caused by unnormalized database? I'm thinking, since what I'm looking for is just one row, should that status also be located in the parent table?
Please see the parent table for more information:
Current Documents Table
| DocumentID | Title | Content | DateCreated |
| 1 | TitleA | ... | ... |
| 2 | TitleB | ... | ... |
| 3 | TitleC | ... | ... |
Should the parent table be like this so that I can easily access its status?
| DocumentID | Title | Content | DateCreated | CurrentStatus |
| 1 | TitleA | ... | ... | s1 |
| 2 | TitleB | ... | ... | s3 |
| 3 | TitleC | ... | ... | s1 |
UPDATE
I just learned how to use "apply" which makes it easier to address such problems.

Answer 1

;WITH cte AS
(
SELECT *,
ROW_NUMBER() OVER (PARTITION BY DocumentID ORDER BY DateCreated DESC) AS rn
FROM DocumentStatusLogs
)
SELECT *
FROM cte
WHERE rn = 1
If you expect 2 entries per day, then this will arbitrarily pick one. To get both entries for a day, use DENSE_RANK instead
As for normalised or not, it depends if you want to:
maintain status in 2 places
preserve status history
...
As it stands, you preserve status history. If you want latest status in the parent table too (which is denormalisation) you'd need a trigger to maintain "status" in the parent. or drop this status history table.

Answer 2

I just learned how to use cross apply. Here's how to use it in this scenario:
select d.DocumentID, ds.Status, ds.DateCreated
from Documents as d
cross apply
(select top 1 Status, DateCreated
from DocumentStatusLogs
where DocumentID = d.DocumentId
order by DateCreated desc) as ds

Answer 3

I know this is an old thread but the TOP 1 WITH TIES solutions is quite nice and might be helpful to some reading through the solutions.
select top 1 with ties
DocumentID
,Status
,DateCreated
from DocumentStatusLogs
order by row_number() over (partition by DocumentID order by DateCreated desc)
The select top 1 with ties clause tells SQL Server that you want to return the first row per group. But how does SQL Server know how to group up the data? This is where the order by row_number() over (partition by DocumentID order by DateCreated desc comes in. The column/columns after partition by defines how SQL Server groups up the data. Within each group, the rows will be sorted based on the order by columns. Once sorted, the top row in each group will be returned in the query.
More about the TOP clause can be found here.

Answer 4

I've done some timings over the various recommendations here, and the results really depend on the size of the table involved, but the most consistent solution is using the CROSS APPLY These tests were run against SQL Server 2008-R2, using a table with 6,500 records, and another (identical schema) with 137 million records. The columns being queried are part of the primary key on the table, and the table width is very small (about 30 bytes). The times are reported by SQL Server from the actual execution plan.
Query Time for 6500 (ms) Time for 137M(ms)
CROSS APPLY 17.9 17.9
SELECT WHERE col = (SELECT MAX(COL)…) 6.6 854.4
DENSE_RANK() OVER PARTITION 6.6 907.1
I think the really amazing thing was how consistent the time was for the CROSS APPLY regardless of the number of rows involved.

Answer 5

If you're worried about performance, you can also do this with MAX():
SELECT *
FROM DocumentStatusLogs D
WHERE DateCreated = (SELECT MAX(DateCreated) FROM DocumentStatusLogs WHERE ID = D.ID)
ROW_NUMBER() requires a sort of all the rows in your SELECT statement, whereas MAX does not. Should drastically speed up your query.

Answer 6

SELECT * FROM
DocumentStatusLogs JOIN (
SELECT DocumentID, MAX(DateCreated) DateCreated
FROM DocumentStatusLogs
GROUP BY DocumentID
) max_date USING (DocumentID, DateCreated)
What database server? This code doesn't work on all of them.
Regarding the second half of your question, it seems reasonable to me to include the status as a column. You can leave DocumentStatusLogs as a log, but still store the latest info in the main table.
BTW, if you already have the DateCreated column in the Documents table you can just join DocumentStatusLogs using that (as long as DateCreated is unique in DocumentStatusLogs).
Edit: MsSQL does not support USING, so change it to:
ON DocumentStatusLogs.DocumentID = max_date.DocumentID AND DocumentStatusLogs.DateCreated = max_date.DateCreated

Answer 7

This is one of the most easily found question on the topic, so I wanted to give a modern answer to the it (both for my reference and to help others out). By using first_value and over you can make short work of the above query:
Select distinct DocumentID
, first_value(status) over (partition by DocumentID order by DateCreated Desc) as Status
, first_value(DateCreated) over (partition by DocumentID order by DateCreated Desc) as DateCreated
From DocumentStatusLogs
This should work in Sql Server 2008 and up. First_value can be thought of as a way to accomplish Select Top 1 when using an over clause. Over allows grouping in the select list so instead of writing nested subqueries (like many of the existing answers do), this does it in a more readable fashion. Hope this helps.

Answer 8

Here are 3 separate approaches to the problem in hand along with the best choices of indexing for each of those queries (please try out the indexes yourselves and see the logical read, elapsed time, execution plan. I have provided the suggestions from my experience on such queries without executing for this specific problem).
Approach 1: Using ROW_NUMBER(). If rowstore index is not being able to enhance the performance, you can try out nonclustered/clustered columnstore index as for queries with aggregation and grouping and for tables which are ordered by in different columns all the times, columnstore index usually is the best choice.
;WITH CTE AS
(
SELECT *,
RN = ROW_NUMBER() OVER (PARTITION BY DocumentID ORDER BY DateCreated DESC)
FROM DocumentStatusLogs
)
SELECT ID
,DocumentID
,Status
,DateCreated
FROM CTE
WHERE RN = 1;
Approach 2: Using FIRST_VALUE. If rowstore index is not being able to enhance the performance, you can try out nonclustered/clustered columnstore index as for queries with aggregation and grouping and for tables which are ordered by in different columns all the times, columnstore index usually is the best choice.
SELECT DISTINCT
ID = FIRST_VALUE(ID) OVER (PARTITION BY DocumentID ORDER BY DateCreated DESC)
,DocumentID
,Status = FIRST_VALUE(Status) OVER (PARTITION BY DocumentID ORDER BY DateCreated DESC)
,DateCreated = FIRST_VALUE(DateCreated) OVER (PARTITION BY DocumentID ORDER BY DateCreated DESC)
FROM DocumentStatusLogs;
Approach 3: Using CROSS APPLY. Creating rowstore index on DocumentStatusLogs table covering the columns used in the query should be enough to cover the query without need of a columnstore index.
SELECT DISTINCT
ID = CA.ID
,DocumentID = D.DocumentID
,Status = CA.Status
,DateCreated = CA.DateCreated
FROM DocumentStatusLogs D
CROSS APPLY (
SELECT TOP 1 I.*
FROM DocumentStatusLogs I
WHERE I.DocumentID = D.DocumentID
ORDER BY I.DateCreated DESC
) CA;

Answer 9

This is quite an old thread, but I thought I'd throw my two cents in just the same as the accepted answer didn't work particularly well for me. I tried gbn's solution on a large dataset and found it to be terribly slow (>45 seconds on 5 million plus records in SQL Server 2012). Looking at the execution plan it's obvious that the issue is that it requires a SORT operation which slows things down significantly.
Here's an alternative that I lifted from the entity framework that needs no SORT operation and does a NON-Clustered Index search. This reduces the execution time down to < 2 seconds on the aforementioned record set.
SELECT
[Limit1].[DocumentID] AS [DocumentID],
[Limit1].[Status] AS [Status],
[Limit1].[DateCreated] AS [DateCreated]
FROM (SELECT DISTINCT [Extent1].[DocumentID] AS [DocumentID] FROM [dbo].[DocumentStatusLogs] AS [Extent1]) AS [Distinct1]
OUTER APPLY (SELECT TOP (1) [Project2].[ID] AS [ID], [Project2].[DocumentID] AS [DocumentID], [Project2].[Status] AS [Status], [Project2].[DateCreated] AS [DateCreated]
FROM (SELECT
[Extent2].[ID] AS [ID],
[Extent2].[DocumentID] AS [DocumentID],
[Extent2].[Status] AS [Status],
[Extent2].[DateCreated] AS [DateCreated]
FROM [dbo].[DocumentStatusLogs] AS [Extent2]
WHERE ([Distinct1].[DocumentID] = [Extent2].[DocumentID])
) AS [Project2]
ORDER BY [Project2].[ID] DESC) AS [Limit1]
Now I'm assuming something that isn't entirely specified in the original question, but if your table design is such that your ID column is an auto-increment ID, and the DateCreated is set to the current date with each insert, then even without running with my query above you could actually get a sizable performance boost to gbn's solution (about half the execution time) just from ordering on ID instead of ordering on DateCreated as this will provide an identical sort order and it's a faster sort.

Answer 10

My code to select top 1 from each group
select a.* from #DocumentStatusLogs a where
datecreated in( select top 1 datecreated from #DocumentStatusLogs b
where
a.documentid = b.documentid
order by datecreated desc
)

Answer 11

This solution can be used to get the TOP N most recent rows for each partition (in the example, N is 1 in the WHERE statement and partition is doc_id):
SELECT T.doc_id, T.status, T.date_created FROM
(
SELECT a.*, ROW_NUMBER() OVER (PARTITION BY doc_id ORDER BY date_created DESC) AS rnk FROM doc a
) T
WHERE T.rnk = 1;

Answer 12

CROSS APPLY was the method I used for my solution, as it worked for me, and for my clients needs. And from what I've read, should provide the best overall performance should their database grow substantially.

Answer 13

Verifying Clint's awesome and correct answer from above:
The performance between the two queries below is interesting. 52% being the top one. And 48% being the second one. A 4% improvement in performance using DISTINCT instead of ORDER BY. But ORDER BY has the advantage to sort by multiple columns.
IF (OBJECT_ID('tempdb..#DocumentStatusLogs') IS NOT NULL) BEGIN DROP TABLE #DocumentStatusLogs END
CREATE TABLE #DocumentStatusLogs (
[ID] int NOT NULL,
[DocumentID] int NOT NULL,
[Status] varchar(20),
[DateCreated] datetime
)
INSERT INTO #DocumentStatusLogs([ID], [DocumentID], [Status], [DateCreated]) VALUES (2, 1, 'S1', '7/29/2011 1:00:00')
INSERT INTO #DocumentStatusLogs([ID], [DocumentID], [Status], [DateCreated]) VALUES (3, 1, 'S2', '7/30/2011 2:00:00')
INSERT INTO #DocumentStatusLogs([ID], [DocumentID], [Status], [DateCreated]) VALUES (6, 1, 'S1', '8/02/2011 3:00:00')
INSERT INTO #DocumentStatusLogs([ID], [DocumentID], [Status], [DateCreated]) VALUES (1, 2, 'S1', '7/28/2011 4:00:00')
INSERT INTO #DocumentStatusLogs([ID], [DocumentID], [Status], [DateCreated]) VALUES (4, 2, 'S2', '7/30/2011 5:00:00')
INSERT INTO #DocumentStatusLogs([ID], [DocumentID], [Status], [DateCreated]) VALUES (5, 2, 'S3', '8/01/2011 6:00:00')
INSERT INTO #DocumentStatusLogs([ID], [DocumentID], [Status], [DateCreated]) VALUES (6, 3, 'S1', '8/02/2011 7:00:00')
Option 1:
SELECT
[Extent1].[ID],
[Extent1].[DocumentID],
[Extent1].[Status],
[Extent1].[DateCreated]
FROM #DocumentStatusLogs AS [Extent1]
OUTER APPLY (
SELECT TOP 1
[Extent2].[ID],
[Extent2].[DocumentID],
[Extent2].[Status],
[Extent2].[DateCreated]
FROM #DocumentStatusLogs AS [Extent2]
WHERE [Extent1].[DocumentID] = [Extent2].[DocumentID]
ORDER BY [Extent2].[DateCreated] DESC, [Extent2].[ID] DESC
) AS [Project2]
WHERE ([Project2].[ID] IS NULL OR [Project2].[ID] = [Extent1].[ID])
Option 2:
SELECT
[Limit1].[DocumentID] AS [ID],
[Limit1].[DocumentID] AS [DocumentID],
[Limit1].[Status] AS [Status],
[Limit1].[DateCreated] AS [DateCreated]
FROM (
SELECT DISTINCT [Extent1].[DocumentID] AS [DocumentID] FROM #DocumentStatusLogs AS [Extent1]
) AS [Distinct1]
OUTER APPLY (
SELECT TOP (1) [Project2].[ID] AS [ID], [Project2].[DocumentID] AS [DocumentID], [Project2].[Status] AS [Status], [Project2].[DateCreated] AS [DateCreated]
FROM (
SELECT
[Extent2].[ID] AS [ID],
[Extent2].[DocumentID] AS [DocumentID],
[Extent2].[Status] AS [Status],
[Extent2].[DateCreated] AS [DateCreated]
FROM #DocumentStatusLogs AS [Extent2]
WHERE [Distinct1].[DocumentID] = [Extent2].[DocumentID]
) AS [Project2]
ORDER BY [Project2].[ID] DESC
) AS [Limit1]
In Microsoft SQL Server Management Studio: after highlighting and running the first block, highlight both Option 1 and Option 2, right click -> [Display Estimated Execution Plan]. Then run the entire thing to see the results.
Option 1 Results:
ID DocumentID Status DateCreated
6 1 S1 8/2/11 3:00
5 2 S3 8/1/11 6:00
6 3 S1 8/2/11 7:00
Option 2 Results:
ID DocumentID Status DateCreated
6 1 S1 8/2/11 3:00
5 2 S3 8/1/11 6:00
6 3 S1 8/2/11 7:00
Note:
I tend to use APPLY when I want a join to be 1-to-(1 of many).
I use a JOIN if I want the join to be 1-to-many, or many-to-many.
I avoid CTE with ROW_NUMBER() unless I need to do something advanced and am ok with the windowing performance penalty.
I also avoid EXISTS / IN subqueries in the WHERE or ON clause, as I have experienced this causing some terrible execution plans. But mileage varies. Review the execution plan and profile performance where and when needed!

Answer 14

SELECT o.*
FROM `DocumentStatusLogs` o
LEFT JOIN `DocumentStatusLogs` b
ON o.DocumentID = b.DocumentID AND o.DateCreated < b.DateCreated
WHERE b.DocumentID is NULL ;
If you want to return only recent document order by DateCreated, it will return only top 1 document by DocumentID

Answer 15

I believe this can be done just like this. This might need some tweaking but you can just select the max from the group.
These answers are overkill..
SELECT
d.DocumentID,
MAX(d.Status),
MAX(d1.DateCreated)
FROM DocumentStatusLogs d, DocumentStatusLogs d1
USING DocumentID
GROUP BY 1
ORDER BY 3 DESC

Answer 16

In scenarios where you want to avoid using row_count(), you can also use a left join:
select ds.DocumentID, ds.Status, ds.DateCreated
from DocumentStatusLogs ds
left join DocumentStatusLogs filter
ON ds.DocumentID = filter.DocumentID
-- Match any row that has another row that was created after it.
AND ds.DateCreated < filter.DateCreated
-- then filter out any rows that matched
where filter.DocumentID is null
For the example schema, you could also use a "not in subquery", which generally compiles to the same output as the left join:
select ds.DocumentID, ds.Status, ds.DateCreated
from DocumentStatusLogs ds
WHERE ds.ID NOT IN (
SELECT filter.ID
FROM DocumentStatusLogs filter
WHERE ds.DocumentID = filter.DocumentID
AND ds.DateCreated < filter.DateCreated)
Note, the subquery pattern wouldn't work if the table didn't have at least one single-column unique key/constraint/index, in this case the primary key "Id".
Both of these queries tend to be more "expensive" than the row_count() query (as measured by Query Analyzer). However, you might encounter scenarios where they return results faster or enable other optimizations.

Answer 17

SELECT documentid,
status,
datecreated
FROM documentstatuslogs dlogs
WHERE status = (SELECT status
FROM documentstatuslogs
WHERE documentid = dlogs.documentid
ORDER BY datecreated DESC
LIMIT 1)

Answer 18

Some database engines* are starting to support the QUALIFY clause that allows to filter the result of window functions (which the accepted answer uses).
So the accepted answer can become
SELECT *, ROW_NUMBER() OVER (PARTITION BY DocumentID ORDER BY DateCreated DESC) AS rn
FROM DocumentStatusLogs
QUALIFY rn = 1
See this article for an in depth explanation: https://jrandrews.net/the-joy-of-qualify
You can use this tool to see which database support this clause: https://www.jooq.org/translate/
There is an option to transform the qualify clause when the target dialect does not support it.
*Teradata, BigQuery, H2, Snowflake...

Answer 19

Try this:
SELECT [DocumentID]
,[tmpRez].value('/x[2]', 'varchar(20)') AS [Status]
,[tmpRez].value('/x[3]', 'datetime') AS [DateCreated]
FROM (
SELECT [DocumentID]
,cast('<x>' + max(cast([ID] AS VARCHAR(10)) + '</x><x>' + [Status] + '</x><x>' + cast([DateCreated] AS VARCHAR(20))) + '</x>' AS XML) AS [tmpRez]
FROM DocumentStatusLogs
GROUP BY DocumentID
) AS [tmpQry]