I'm just switch to zsh and now adapting the alias in which was printing some text (in color) along with a command.
I have been trying to use the $fg array var, but there is a side effect, all the command is printed before being executed.
The same occur if i'm just testing a echo with a color code in the terminal:
echo $fg_bold[blue] "test"
]2;echo "test" test #the test is in the right color
Why the command print itself before to do what it's supposed to do ? (I precise this doesn't happen when just printing whithout any wariable command)
Have I to set a specific option to zsh, use echo with a special parameter to get ride of that?
Execute the command first (keep its output somewhere), and then issue echo. The easiest way I can think of doing that would be:
echo $fg[red] `ls`
Edit: Ok, so your trouble is some trash before the actual output of echo. You have some funny configuration that is causing you trouble.
What to do (other than inspecting your configuration):
start a shell with zsh -f (it will skip any configuration), and then re-try the echo command: autoload colors; colors; echo $fg_bold[red] foo (this should show you that the problem is in your configuration).
Most likely your configuration defines a precmd function that gets executed before every command (which is failing in some way). Try which precmd. If that is not defined, try echo $precmd_functions (precmd_functions is an array of functions that get executed before every command). Knowing which is the code being executed would help you search for it in your configuration (which I assume you just took from someone else).
If I had to guess, I'd say you are using oh-my-zsh without knowing exactly what you turned on (which is an endless source of troubles like this).
I don't replicate your issue, which I think indicates that it's either an option (that I've set), or it's a zsh version issue:
$ echo $fg_bold[red] test
test
Because I can't replicate it, I'm sure there's an option to stop it happening for you. I do not know what that option is (I'm using heavily modified oh-my-zsh, and still haven't finished learning what all the zsh options do or are).
My suggestions:
You could try using print:
$ print $fg_bold[red] test
test
The print builtin has many more options than echo (see man zshbuiltins).
You should also:
Check what version zsh you're using.
Check what options (setopt) are enabled.
Check your ~/.zshrc (and other loaded files) to see what, if any, options and functions are being run.
This question may suggest checking what TERM you're using, but reading your question it sounds like you're only seeing this behaviour (echoing of the command after entry) when you're using aliases...?
Related
One of my recipes in Yocto need to create a file containing a very specific line, something like:
${libdir}/something
To do this, I have the recipe task:
do_install() {
echo '${libdir}/something' >/path/to/my/file
}
Keeping in mind that I want that string exactly as shown, I can't figure out how to escape it to prevent bitbake from substituting in its own value of libdir.
I originally thought the echo command with single quotes would do the trick (as it does in the bash shell) but bitbake must be interpreting the line before passing it to the shell. I've also tried escaping it both with $$ and \$ to no avail.
I can find nothing in the bitbake doco about preventing variable expansion, just stuff to do with immediate, deferred and Python expansions.
What do I need to do to get that string into the file as is?
Bitbake seems to have particular issues in preventing expansion from taking place. Regardless of whether you use single or double quotes, it appears that the variables will be expanded before being passed to the shell.
Hence, if you want them to not be expanded, you need to effectively hide them from BitBake, and this can be done with something like:
echo -e '\x24{libdir}/something' >/path/to/my/file
This uses the hexadecimal version of $ so that BitBake does not recognise it as a variable to be expanded.
You do need to ensure you're running the correct echo command however. Under some distros (like Ubuntu), it might run the sh-internal echo which does not recognise the -e option. In order to get around that, you may have to run the variant of echo that lives on the file system (and that does recognise that option):
/bin/echo -e '\x24{libdir}/something' >/path/to/my/file
By default this task will be executed as shell function via /bin/sh, but it depends on your system what it will be as you can have a symlink named /bin/sh pointing to bash. The BitBake's manual prevents from using bashism syntax though.
You can consider just adding this task in your recipe as python function:
python do_install () {
with open('/path/to/your/file', 'a') as file:
file.write('${libdir}/something')
}
'a' stands for append.
This should eliminate the problem with variable expansion.
There is no standard way to escape these sorts of expressions that I am aware of, other than to try to break up the expression - accordingly this should work:
do_install() {
echo '$''{libdir}/something' >/path/to/my/file
}
The best solution is simply this:
bitbake_function() {
command $libdir/whatever
}
Bitbake will only expand ${libdir}; $libdir is passed through verbatim.
We don't have to worry about dollar signs that are not followed by {, and in this case, there is no need for libdir to be wrapped in braces.
The only time we run into a problem with just $foo is if we have something like ${foo}bar where the braces are required as delimiters so that bar isn't included into the variable name. In that situation, there are other solutions, such as for instance generating the shell syntax "$foo"bar. This is less cryptic than resorting to \x24.
If you need to use $ in variable assignment, remember that bitbake won't evaluate $whatever so you have to escape it for the underlying shell.
For instance I set gcc/ld Rpath option to use $ORIGIN keyword this way:
TARGET_LDFLAGS_append = " -Wl,-rpath-link=\\$$ORIGIN"
https://lists.yoctoproject.org/pipermail/yocto/2017-September/037820.html
You can define a variable to be a literal dollar sign.
DOLLAR = "$"
do_install() {
echo '${DOLLAR}{libdir}/something' >/path/to/my/file
}
no extra quoting required.
By default, IntelliJ Idea will insert (something like) the following as the header of a new source file:
/**
* Created by JohnDoe on 2016-04-27.
*/
The corresponding template is:
/**
* Created by ${USER} on ${DATE}.
*/
Is it possible to update this template so that it inserts the last date of modification when the file is changed? For example:
/**
* Created by JohnDoe on 2016-03-27.
* Last modified by JaneDoe on 2016-04-27
*/
It is not supported out of the box. I suggest you do not include information about author and last edit/create time in file at all.
The reason is that your version control system (Git, SVN) contains the same information automatically. So the manual labelling is just duplicate of already existing info, but is only more error prone and needs to be manually updated.
Here's a working solution similar to what I'm using. Tested on mac os.
Create a bash script which will replace first occurrence of Last modified by JaneDoe on $DATE only if the exact value is not contained in the file:
#!/bin/bash
FILE=src/java/test/Test.java
DATE=`date '+%Y-%m-%d'`
PREFIX="Last modified by JaneDoe on "
STRING="$PREFIX.*$"
SUBSTITUTE="$PREFIX$DATE"
if ! grep -q "$SUBSTITUTE" "$FILE"; then
sed -i '' "1,/$(echo "$STRING")/ s/$(echo "$STRING")/$(echo "$SUBSTITUTE")/" $FILE
fi
Install File Watchers plugin.
Create a file watcher with appropriate scope (it may be this single file or any other scope, so that any change in project's source code will update modified date or version etc.) and put a path to your bash script into Program field.
Now every time the file changes the date will update. If you want to update date for each file separately, an argument $FilePath$ should be passed to the script.
This might have been just a comment to #oleg-mikhailov excellent idea, but the code snippet won't fit. Basically, I just tweaked his solution.
I needed a slightly different syntax but that's not the issue. The issue was that when the script ran automatically upon file save using the File Watchers plugin, if ran on a file which doesn't include PREFIX it would run over and over for ever.
I presume the that the issue is with the plugin itself, as it didn't happen when run from the shell, but I'm not sure why it happened.
Anyway, I ended up running the following script (as I said only a slight change with respect to the original). The new script also raises an error if the the prefix doesn't exist. For me this is a feature as Pycharm prompts me with the error, and I can fix the file.
Tested with PyCharm 2021.2.3 on macOS 11.6.
#!/bin/bash
FILE=$1
DATE=`date '+%Y-%m-%d'`
PREFIX="last_modified_date: "
STRING="$PREFIX.*$"
SUBSTITUTE="$PREFIX$DATE"
if ! grep -q "$SUBSTITUTE" "$FILE"; then
if grep -q "$PREFIX" "$FILE"; then
sed -i '' "s/$(echo "$STRING")/$(echo "$SUBSTITUTE")/" $FILE
else
echo "Error!"
echo "'$PREFIX' doesn't appear in $FILE"
exit 1
fi
fi
PHPStorm has not a "hook" for launching task after detect a change in file (just for uploading in server yes). Code templating is based on the creation of file not change.
The behaviour you want (automatic change file after manual change file) can be useful for lot of things but it's circular headhache for editor. Because if you change a file it must change file (and if a file is change ? it change file ?).
However, You can, perhaps, "enable Live Templates" when you launch a "reformat code" which able to rewrite your begin template code that way rewrite date modification.
Other solution is that use a tools with as grunt but I don't know if manage php file.
I like it when terminal/console test runs actually show their output in either red or green text. It seems like a lot of the testing libraries available for Go have this. However, I'd like to just use the default testing package that comes with Go. Is there a way to colorize it's output with red and green?
You can use grc, a generic colourizer, to colourize anything.
On Debian/Ubuntu, install with apt-get install grc. On a Mac with , brew install grc.
Create a config directory in your home directory:
mkdir ~/.grc
Then create your personal grc config in ~/.grc/grc.conf:
# Go
\bgo.* test\b
conf.gotest
Then create a Go test colourization config in ~/.grc/conf.gotest, such as:
regexp==== RUN .*
colour=blue
-
regexp=--- PASS: .*
colour=green
-
regexp=^PASS$
colour=green
-
regexp=^(ok|\?) .*
colour=magenta
-
regexp=--- FAIL: .*
colour=red
-
regexp=[^\s]+\.go(:\d+)?
colour=cyan
Now you can run Go tests with:
grc go test -v ./..
Sample output:
To avoid typing grc all the time, add an alias to your shell (if using Bash, either ~/.bashrc or ~/.bash_profile or both, depending on your OS):
alias go=grc go
Now you get colourization simply by running:
go test -v ./..
You can create a wrapper shell script for this and color it using color escape sequence. Here's a simple example on Linux (I'm not sure how this would look on windows, but I guess there is a way.. :) )
go test -v . | sed ''/PASS/s//$(printf "\033[32mPASS\033[0m")/'' | sed ''/FAIL/s//$(printf "\033[31mFAIL\033[0m")/''
There's also a tool called richgo that does exactly this, in a user-friendly way.
You would still need a library to add color escape code like:
for Windows: mattn/go-colorable or shiena/ansicolor
for Unix or Windows: fatih/color or kortschak/ct
for Unix or Windows: logrusorgru/aurora (mentioned by Ivan Black in the comments)
From there, you specify what you want to color (StdOut or StdErr, like in this example)
rakyll/gotest (screenshot) is a binary that does this.
Example:
$ gotest -v github.com/rakyll/hey
Emoji
You can use colors for text as others mentioned in their answers to have colorful text with a color code or using a third-party library.
But you can use emojis instead! for example, you can useβ οΈ for warning messages and π for error messages.
Or simply use these notebooks as a color:
π: error message
π: warning message
π: ok status message
π: action message
π: canceled status message
π: Or anything you like and want to recognize immediately by color
π Bonus:
This method also helps you to quickly scan and find logs directly in the source code.
But some distributions of Linux default emoji font are not colorful by default and you may want to make them colorful, first.
BoltDB has some test methods that look like this:
func assert(tb testing.TB, condition bool, msg string, v ...interface{}) {
if !condition {
_, file, line, _ := runtime.Caller(1)
fmt.Printf("\033[31m%s:%d: "+msg+"\033[39m\n\n", append([]interface{}{filepath.Base(file), line}, v...)...)
tb.FailNow()
}
}
Here are the rest. I added the green dots here.
I'm using xcodebuild inside a bash script on a continuous integration server.
I would like to know when a build as failed in the script, so I can exit prematurely from it and mark the build as failed.
xcodebuild displays a BUILD FAILED message to the console, but I don't succeed in getting a return value.
How can I achieve this?
Thanks in advance
I solved my problem using this command: xcodebuild -... || exit 1
You can use the "$?" variable to get the return code of the previous command.
xcodebuild -...
if [[ $? == 0 ]]; then
echo "Success"
else
echo "Failed"
fi
xcodebuild always returns 0, regardless of the actual test result. You should check for either ** BUILD FAILED ** or ** BUILD SUCCEEDED ** in the output to know whether tests pass or not.
Xcodebuild can return any of the error codes listed below and not restricted to EX_OK (or int 0).
However, I learnt from solution provided by Dmitry and modified as following. It works for me and I hope it could be helpful.
xcodebuild -project ......
if test $? -eq 0
then
echo "Success"
else
echo "Failed"
fi
Error codes
The following are the error codes that can be returned by sysexits archive:
EX_OK (0): Successful exit.
EX_USAGE (64): The command was used incorrectly, e.g., with the wrong number of arguments, a bad flag, a bad syntax in a parameter, or whatever.
EX_DATAERR (65): The input data was incorrect in some way. This should only be used for user's data and not system files.
EX_NOINPUT (66): An input file (not a system file) did not exist or was not readable. This could also include errors like ``No message'' to a mailer (if it cared to catch it).
EX_NOUSER (67): The user specified did not exist. This might be used for mail addresses or remote logins.
EX_NOHOST (68): The host specified did not exist. This is used in mail addresses or network requests.
EX_UNAVAILABLE (69): A service is unavailable. This can occur if a support program or file does not exist. This can also be used as a catchall message when something you wanted to do doesn't work, but you don't know why.
EX_SOFTWARE (70): An internal software error has been detected. This should be limited to non-operating nonoperating operating system related errors as possible.
EX_OSERR (71): An operating system error has been detected. This is intended to be used for such things as cannot fork'',cannot create pipe'', or the like. It includes things like getuid returning a user that does not exist in the passwd file.
EX_OSFILE (72): Some system file (e.g., /etc/passwd, /var/run/utmp, etc.) does not exist, cannot be opened, or has some sort of error (e.g., syntax error).
EX_CANTCREAT (73): A (user specified) output file cannot be created.
EX_IOERR (74): An error occurred while doing I/O on some file.
EX_TEMPFAIL (75): Temporary failure, indicating something that is not really an error. In send-mail, sendmail, mail, this means that a mailer (e.g.) could not create a connection, and the request should be reattempted later.
EX_PROTOCOL (76): The remote system returned something that was ``not possible'' during a protocol exchange.
EX_NOPERM (77): You did not have sufficient permission to perform the operation. This is not intended for file system problems, which should use EX_NOINPUT or EX_CANTCREAT, but rather for higher level permissions.
EX_CONFIG (78): Something was found in an unconfigured or misconfigured state.
For more info click here.
Maybe it's not because of the xcodebuild not returning non-zero when build failed. Your shell script continuing to run regardless of the returning-error line might be the result of that you didn't run the script with a "-e" option.
Try put #!/bin/bash -e ahead of the script file.
Generally, you can always check the exist value for the last run process in Unix bash by:
$ echo $?
where $? is a built-in placeholder of the exist value of last executed command. For more details about other bash's built-in variables see here.
So, first run your command you want to investigate its return code, then run echo as above.
Whether the compiled product οΌ.a or .ipa fileοΌexists
So I found the question about how to view the change history of a file, but the change history of this particular file is huge and I'm really only interested in the changes of a particular method. So would it be possible to see the change history for just that particular method?
I know this would require git to analyze the code and that the analysis would be different for different languages, but method/function declarations look very similar in most languages, so I thought maybe someone has implemented this feature.
The language I'm currently working with is Objective-C and the SCM I'm currently using is git, but I would be interested to know if this feature exists for any SCM/language.
Recent versions of git log learned a special form of the -L parameter:
-L :<funcname>:<file>
Trace the evolution of the line range given by "<start>,<end>" (or the function name regex <funcname>) within the <file>. You may not give any pathspec limiters. This is currently limited to a walk starting from a single revision, i.e., you may only give zero or one positive revision arguments. You can specify this option more than once.
...
If β:<funcname>β is given in place of <start> and <end>, it is a regular expression that denotes the range from the first funcname line that matches <funcname>, up to the next funcname line. β:<funcname>β searches from the end of the previous -L range, if any, otherwise from the start of file. β^:<funcname>β searches from the start of file.
In other words: if you ask Git to git log -L :myfunction:path/to/myfile.c, it will now happily print the change history of that function.
Using git gui blame is hard to make use of in scripts, and whilst git log -G and git log --pickaxe can each show you when the method definition appeared or disappeared, I haven't found any way to make them list all changes made to the body of your method.
However, you can use gitattributes and the textconv property to piece together a solution that does just that. Although these features were originally intended to help you work with binary files, they work just as well here.
The key is to have Git remove from the file all lines except the ones you're interested in before doing any diff operations. Then git log, git diff, etc. will see only the area you're interested in.
Here's the outline of what I do in another language; you can tweak it for your own needs.
Write a short shell script (or other program) that takes one argument -- the name of a source file -- and outputs only the interesting part of that file (or nothing if none of it is interesting). For example, you might use sed as follows:
#!/bin/sh
sed -n -e '/^int my_func(/,/^}/ p' "$1"
Define a Git textconv filter for your new script. (See the gitattributes man page for more details.) The name of the filter and the location of the command can be anything you like.
$ git config diff.my_filter.textconv /path/to/my_script
Tell Git to use that filter before calculating diffs for the file in question.
$ echo "my_file diff=my_filter" >> .gitattributes
Now, if you use -G. (note the .) to list all the commits that produce visible changes when your filter is applied, you will have exactly those commits that you're interested in. Any other options that use Git's diff routines, such as --patch, will also get this restricted view.
$ git log -G. --patch my_file
VoilΓ !
One useful improvement you might want to make is to have your filter script take a method name as its first argument (and the file as its second). This lets you specify a new method of interest just by calling git config, rather than having to edit your script. For example, you might say:
$ git config diff.my_filter.textconv "/path/to/my_command other_func"
Of course, the filter script can do whatever you like, take more arguments, or whatever: there's a lot of flexibility beyond what I've shown here.
The closest thing you can do is to determine the position of your function in the file (e.g. say your function i_am_buggy is at lines 241-263 of foo/bar.c), then run something to the effect of:
git log -p -L 200,300:foo/bar.c
This will open less (or an equivalent pager). Now you can type in /i_am_buggy (or your pager equivalent) and start stepping through the changes.
This might even work, depending on your code style:
git log -p -L /int i_am_buggy\(/,+30:foo/bar.c
This limits the search from the first hit of that regex (ideally your function declaration) to thirty lines after that. The end argument can also be a regexp, although detecting that with regexp's is an iffier proposition.
git log has an option '-G' could be used to find all differences.
-G Look for differences whose added or removed line matches the
given <regex>.
Just give it a proper regex of the function name you care about. For example,
$ git log --oneline -G'^int commit_tree'
40d52ff make commit_tree a library function
81b50f3 Move 'builtin-*' into a 'builtin/' subdirectory
7b9c0a6 git-commit-tree: make it usable from other builtins
The correct way is to use git log -L :function:path/to/file as explained in eckes answer.
But in addition, if your function is very long, you may want to see only the changes that various commit had introduced, not the whole function lines, included unmodified, for each commit that maybe touch only one of these lines. Like a normal diff does.
Normally git log can view differences with -p, but this not work with -L.
So you have to grep git log -L to show only involved lines and commits/files header to contextualize them. The trick here is to match only terminal colored lines, adding --color switch, with a regex. Finally:
git log -L :function:path/to/file --color | grep --color=never -E -e "^(^[\[[0-9;]*[a-zA-Z])+" -3
Note that ^[ should be actual, literal ^[. You can type them by pressing ^V^[ in bash, that is Ctrl + V, Ctrl + [. Reference here.
Also last -3 switch, allows to print 3 lines of output context, before and after each matched line. You may want to adjust it to your needs.
Show function history with git log -L :<funcname>:<file> as showed in eckes's answer and git doc
If it shows nothing, refer to Defining a custom hunk-header to add something like *.java diff=java to the .gitattributes file to support your language.
Show function history between commits with git log commit1..commit2 -L :functionName:filePath
Show overloaded function history (there may be many function with same name, but with different parameters) with git log -L :sum\(double:filepath
git blame shows you who last changed each line of the file; you can specify the lines to examine so as to avoid getting the history of lines outside your function.