Here is the story: I have to implement filter. And in this filter there are certain categories I filter by.
One of the filters is "favourite" filter (#includeFavourites ).
I have this huge SQL with paging and sorting and everything.
Now, when "includeFavourites" option in filter is clicked, then I also have to select unique ID's from different table (this entries are stored in different datatable), where favourites are stored.
I have tried left outer join, but it returns "number of favourites" records for each record in primary table. Coalesce didn't help at all.
Here is my SQL:
--this is needed because stored procedure must know how many days are selected
DECLARE #daysCount int
SET #daysCount = 0
IF (#mon IS NOT NULL)
BEGIN
SET #daysCount = #daysCount+1
END
IF (#tue IS NOT NULL)
BEGIN
SET #daysCount = #daysCount+1
END
IF (#wed IS NOT NULL)
BEGIN
SET #daysCount = #daysCount+1
END
IF (#thu IS NOT NULL)
BEGIN
SET #daysCount = #daysCount+1
END
IF (#fri IS NOT NULL)
BEGIN
SET #daysCount = #daysCount+1
END
IF (#sat IS NOT NULL)
BEGIN
SET #daysCount = #daysCount+1
END
IF (#sun IS NOT NULL)
BEGIN
SET #daysCount = #daysCount+1
END
-- Insert statements for procedure here
SELECT * FROM (
SELECT ROW_NUMBER() OVER
(
ORDER BY
CASE WHEN #OrderBy = 'ND' THEN title END DESC,
CASE WHEN #OrderBy = 'NA' THEN title END,
CASE WHEN #OrderBy = '' THEN title END,
CASE WHEN #OrderBy = 'RD' THEN authorRating END DESC,
CASE WHEN #OrderBy = 'RA' THEN authorRating
) AS Row,
Articles.ArticleId, Articles.userId, Articles.timestamp as datePosted, users.screenName,
defaultSmallImagePath, authorRating, ArticleCosts, title,
FROM Articles
LEFT OUTER JOIN
Users on Articles.userId = Users.userId
LEFT OUTER JOIN
ArticleAdditionalInformation ON ArticleAdditionalInformation.ArticleId = Articles.ArticleId
--JOIN FOR CONTINENT
LEFT OUTER JOIN
Codings as Continent ON Continent.codingKeyId = ArticleAdditionalInformation.continentId AND Continent.languageId = #languageId
-- JOIN FOR COUNTRY
LEFT OUTER JOIN
CodingsAssociated as Country ON Country.codingKeyId = ArticleAdditionalInformation.countryId AND Country.languageId = #languageId
-- JOIN FOR Article TRANSLATION DATA
LEFT OUTER JOIN
ArticlesTranslations ON ArticlesTranslations.ArticleId = Articles.ArticleId AND ArticlesTranslations.languageId=#languageId
LEFT OUTER JOIN
ArticleCategories ON ArticleCategories.ArticleId = Articles.ArticleId
WHERE
(
ArticleCategories.categorieId =1 OR ArticleCategories.categorieId =2 OR
ArticleCategories.categorieId =3 OR ArticleCategories.categorieId =4 OR
ArticleCategories.categorieId = 5
) AND
(ArticlesTranslations.title LIKE '%' + #searchString + '%' OR #searchString IS NULL)
-- COST filter
AND
(ArticleCosts < #cost OR #cost = 0)
AND
(ArticleCosts > 0 OR #cost = 0)
--END cost filter
-- EXCLUDE already stored for selected days
AND Articles.ArticleId -- exclude these ArticleIds
NOT IN
(
SELECT DailyContent.ArticleId
FROM DailyContent
WHERE
sectionId=#sectionId AND
(
weekDayId=#mon OR
weekDayId=#tue OR
weekDayId=#wed OR
weekDayId=#thu OR
weekDayId=#fri OR
weekDayId=#sat OR
weekDayId=#sun
)
GROUP BY
DailyContent.ArticleId
HAVING
(COUNT(sectionId) = #daysCount)
)
-- END exclude
) p
WHERE (Row > #startRowIndex AND Row <=#startRowIndex + #pageSize)
ORDER BY Row
END
So, I would only like to include unique articleIds from favourite table, when #includeFavourites parameter is not null.
Any hint would be greatly appreciated ;)
I am using SQL server 2008.
Try this one -
DECLARE #daysCount INT
SELECT #daysCount =
ISNULL(#mon, 0) + -- if #mon = 1, #tue = 2, .... 1 + (2-1)=1 + (3-2)=1 + ...
ISNULL(#tue - 1, 0) +
ISNULL(#wed - 2, 0) +
ISNULL(#thu - 3, 0) +
ISNULL(#fri - 4, 0) +
ISNULL(#sat - 5, 0) +
ISNULL(#sun - 6, 0)
SELECT *
FROM (
SELECT ROW_NUMBER() OVER
(
ORDER BY
CASE WHEN #OrderBy = 'ND' THEN title END DESC,
CASE WHEN #OrderBy IN ('NA', '') THEN title END,
CASE WHEN #OrderBy = 'RD' THEN authorRating END DESC,
CASE WHEN #OrderBy = 'RA' THEN authorRating
) AS [Row]
, a.ArticleId
, a.userId
, a.[timestamp] as datePosted
, u.screenName
, defaultSmallImagePath
, authorRating
, ArticleCosts
, title
FROM dbo.Articles a -- always use schema and alias
LEFT JOIN dbo.Users u on a.userId = u.userId -- OUTER is unnecessary
LEFT JOIN dbo.ArticleAdditionalInformation aai ON aai.ArticleId = a.ArticleId
LEFT JOIN dbo.Codings cd ON cd.codingKeyId = aai.continentId AND cd.languageId = #languageId
LEFT JOIN dbo.CodingsAssociated c ON c.codingKeyId = aai.countryId AND c.languageId = #languageId
LEFT JOIN dbo.ArticlesTranslations at ON at.ArticleId = a.ArticleId AND at.languageId = #languageId
LEFT JOIN dbo.ArticleCategories ac ON ac.ArticleId = a.ArticleId
WHERE ac.categorieId IN (1, 2, 3, 4, 5)
AND (
at.title LIKE '%' + #searchString + '%'
OR
#searchString IS NULL
)
AND (ArticleCosts < #cost OR #cost = 0)
AND (ArticleCosts > 0 OR #cost = 0)
AND a.ArticleId NOT IN (
SELECT dc2.ArticleId
FROM dbo.DailyContent dc2
WHERE sectionId = #sectionId
AND (
weekDayId % #daysCount = 0 -- possible it's works
--weekDayId = #mon OR
--weekDayId = #tue OR
--weekDayId = #wed OR
--weekDayId = #thu OR
--weekDayId = #fri OR
--weekDayId = #sat OR
--weekDayId = #sun
)
GROUP BY dc2.ArticleId
HAVING COUNT(sectionId) = #daysCount
)
) p
WHERE [Row] BETWEEN #startRowIndex AND #startRowIndex + #pageSize
--ORDER BY [Row] -- ROW_COUNT already sorted your rows
Related
I am having difficulty getting past this error message.
This query works:
declare
#warehouseID int =-1,
#type int=2, --0 = all; 1 = serial;2 = nonserial
#LocationID int =0
SELECT Sum(Quantity) AS Quantity,
WarehouseName,
WarehouseID,
sil.Location,
max(si.RecordID) as test,
min(si.RecordID) as test2,
-- (SELECT max(TransactionDate) from SS_Inventory_History sih2 where sih2.InventoryID in (SI.RecordID)
-- )
-- as test4,
(select max(Case When Serial_Number>'' Then COALESCE(si.SoldDate,'') else sih.TransactionDate end ) AS SoldDate
FROM SS_Inventory SI
JOIN SS_Inventory_Location SIL ON SIL.RecordID=SI.LocationID
LEFT JOIN SS_Inventory_Warehouse SIW ON SIW.RecordID =SIL.WarehouseID
Join SS_Inventory_History sih on InventoryID =sih.RecordID and sih.configStage = 7
WHERE
SIL.WarehouseID = CASE WHEN #warehouseID = -1 THEN SIL.WarehouseID ELSE #warehouseID END
AND SI.LocationID = CASE WHEN #LocationID = 0 THEN SI.LocationID ELSE #LocationID END
AND ((si.Quantity=0 and Serial_Number>'') or (Serial_Number=''))
and SIL.Active=1
AND (
(#type = 0 ) OR
(#type = 1 AND Serial_Number > '') OR
(#type = 2 AND COALESCE(Serial_Number,'')='')
)
) AS SoldDate,
max(si.ReceivedDate) AS ReceivedDate
FROM SS_Inventory SI
JOIN SS_Inventory_Location SIL ON SIL.RecordID=SI.LocationID
LEFT JOIN SS_Inventory_Warehouse SIW ON SIW.RecordID =SIL.WarehouseID
WHERE
SIL.WarehouseID = CASE WHEN #warehouseID = -1 THEN SIL.WarehouseID ELSE #warehouseID END
AND SI.LocationID = CASE WHEN #LocationID = 0 THEN SI.LocationID ELSE #LocationID END
AND Quantity>0
and SIL.Active=1
AND (
(#type = 0 ) OR
(#type = 1 AND Serial_Number > '') OR
(#type = 2 AND COALESCE(Serial_Number,'')='')
)
GROUP BY WarehouseName,
WarehouseID,
Location,
Part_Number,
Dist_Part_Num
but when i add/uncomment
(SELECT max(TransactionDate) from SS_Inventory_History sih2 where sih2.InventoryID in (SI.RecordID)
)
as test4,
so that it looks like
declare
#warehouseID int =-1,
#type int=2, --0 = all; 1 = serial;2 = nonserial
#LocationID int =0
SELECT Sum(Quantity) AS Quantity,
WarehouseName,
WarehouseID,
sil.Location,
--delete me?
max(si.RecordID) as test,
min(si.RecordID) as test2,
(SELECT max(TransactionDate) from SS_Inventory_History sih2 where sih2.InventoryID in (SI.RecordID)
)
as test4,
(select max(Case When Serial_Number>'' Then COALESCE(si.SoldDate,'') else sih.TransactionDate end ) AS SoldDate
FROM SS_Inventory SI
JOIN SS_Inventory_Location SIL ON SIL.RecordID=SI.LocationID
LEFT JOIN SS_Inventory_Warehouse SIW ON SIW.RecordID =SIL.WarehouseID
Join SS_Inventory_History sih on InventoryID =sih.RecordID and sih.configStage = 7
WHERE
SIL.WarehouseID = CASE WHEN #warehouseID = -1 THEN SIL.WarehouseID ELSE #warehouseID END
AND SI.LocationID = CASE WHEN #LocationID = 0 THEN SI.LocationID ELSE #LocationID END
AND ((si.Quantity=0 and Serial_Number>'') or (Serial_Number=''))
and SIL.Active=1
AND (
(#type = 0 ) OR
(#type = 1 AND Serial_Number > '') OR
(#type = 2 AND COALESCE(Serial_Number,'')='')
)
) AS SoldDate,
max(si.ReceivedDate) AS ReceivedDate
FROM SS_Inventory SI
JOIN SS_Inventory_Location SIL ON SIL.RecordID=SI.LocationID
LEFT JOIN SS_Inventory_Warehouse SIW ON SIW.RecordID =SIL.WarehouseID
WHERE
SIL.WarehouseID = CASE WHEN #warehouseID = -1 THEN SIL.WarehouseID ELSE #warehouseID END
AND SI.LocationID = CASE WHEN #LocationID = 0 THEN SI.LocationID ELSE #LocationID END
AND Quantity>0
and SIL.Active=1
AND (
(#type = 0 ) OR
(#type = 1 AND Serial_Number > '') OR
(#type = 2 AND COALESCE(Serial_Number,'')='')
)
GROUP BY WarehouseName,
WarehouseID,
Location,
Part_Number,
Dist_Part_Num
I get this error message:
Msg 8120, Level 16, State 1, Line 15
Column 'SS_Inventory.RecordID' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
Does anyone have any idea what I am doing wrong?
I have two stored procedures that they have the same where clause, one of them is use for pagination:
ALTER PROCEDURE [dbo].[ret_PayrollCalculations_GetPagedFilteredPersonnels]
(
#SortField varchar(512),
#PageNo int,
#PageSize int,
#CalculationCommandType int,
#StartWorkingPeriodId int,
#StartYear int,
#EndWorkingPeriodId int,
#EndYear int,
#Status int,
#SalariedGuid uniqueidentifier,
#SalariedType int,
#OfficeNumber varchar(64),
#SalariedResultSetId int,
#Keyword nvarchar(2024),
#OperationalUnitIds [dbo].[ListOfID] READONLY
)
AS
DECLARE #AccessibleSalariedGuids [dbo].[ListOfGuid]
IF EXISTS (SELECT * FROM #OperationalUnitIDs)
BEGIN
INSERT INTO #AccessibleSalariedGuids
SELECT FeatureGuid FROM prs_OperationalUnitFeatures
WHERE
OperationalUnitID in (SELECT * FROM #OperationalUnitIDs) AND
FeatureFlag IN (2,4)
END
ELSE BEGIN
INSERT INTO #AccessibleSalariedGuids
SELECT [Guid] FROM ret_vwSalaried
END
DECLARE #OffsetRows INT = CASE WHEN #PageNo = 1 THEN 0 ELSE (#PageNo - 1) * #PageSize END;
DECLARE #TotalCount INT;
WITH Result AS(
SELECT
CASE
WHEN #SortField = N'[FullName]' THEN ROW_NUMBER() OVER (ORDER BY salaried.[FullName])
WHEN #SortField = N'[FullName] DESC' THEN ROW_NUMBER() OVER (ORDER BY salaried.[FullName] DESC)
WHEN #SortField = N'[WorkingPeriodTitle]' THEN ROW_NUMBER() OVER (ORDER BY calcs.[Year],workingPeriods.[Index])
WHEN #SortField = N'[WorkingPeriodTitle] DESC' THEN ROW_NUMBER() OVER (ORDER BY calcs.[Year] DESC,workingPeriods.[Index] DESC)
WHEN #SortField = N'[PersonnelNo]' THEN ROW_NUMBER() OVER (ORDER BY salaried.[PersonnelNo])
WHEN #SortField = N'[PersonnelNo] DESC' THEN ROW_NUMBER() OVER (ORDER BY salaried.[PersonnelNo] DESC)
END AS [RowNumber],
calcs.[Guid],
calcs.[CalculationCommandGuid],
calcs.[SalariedGuid],
salaried.[PersonnelNo],
salaried.[FullName] AS [PersonnelFullName],
command.[Type] [CommandType],
salaried.[SalariedType],
workingPeriods.Title AS [WorkingPeriodTitle],
command.[MainYear] AS [Year],
command.[Approved],
command.[FinalApproved]
FROM
ret_PayrollCalculationCommands command INNER JOIN
ret_PayrollCalculations calcs ON calcs.[CalculationCommandGuid] = command.[Guid] INNER JOIN
ret_vwSalaried salaried ON calcs.[SalariedGuid] = salaried.[Guid] INNER JOIN
prs_workingPeriods workingPeriods ON workingPeriods.[Id] = command.[MainWorkingPeriodID]
WHERE
ISNULL(calcs.[MainCalculation],0) = 1 AND
ISNULL(command.[Deleted],0)=0 AND
(#Keyword = '' OR salaried.PersonnelNo = #Keyword OR salaried.FullName LIKE N'%' + #Keyword + '%' OR salaried.FullNameReversed LIKE N'%' + #Keyword + '%') AND
(ISNULL(#calculationCommandType, 0) = 0 OR command.[Type] = #calculationCommandType) AND
(ISNULL(#StartYear, 0) = 0 OR command.[MainYear] >= #StartYear) AND
(ISNULL(#StartWorkingPeriodId, 0) = 0 OR command.[MainWorkingPeriodID] >= #StartWorkingPeriodId) AND
(ISNULL(#EndYear, 0) = 0 OR command.[MainYear] <= #EndYear) AND
(ISNULL(#EndWorkingPeriodId, 0) = 0 OR command.[MainWorkingPeriodID] <= #EndWorkingPeriodId) AND
(ISNULL(#Status, -1) = -1 OR command.[Approved] = #Status) AND
(ISNULL(#SalariedType, -1) = -1 OR salaried.[SalariedType] = #SalariedType) AND
(ISNULL(#SalariedGuid,'00000000-0000-0000-0000-000000000000') = '00000000-0000-0000-0000-000000000000' OR calcs.[SalariedGuid] = #SalariedGuid) AND
(#OfficeNumber IS NULL OR salaried.[OfficeNumber] LIKE '%'+#OfficeNumber+'%') AND
(ISNULL(#SalariedResultSetId, -1) = -1 OR calcs.[SalariedGuid] IN (SELECT [SalariedGuid] FROM ret_SalariedResultSetItems WHERE SalariedResultSetID = #SalariedResultSetId)) AND
(calcs.[SalariedGuid] IN (SELECT * FROM #AccessibleSalariedGuids))
), TableForTotalCount AS (SELECT COUNT(*) As TotalCount FROM Result)
SELECT
(SELECT TOP 1 TotalCount FROM TableForTotalCount) AS TotalCount,
*
FROM Result
ORDER BY
[RowNumber]
OFFSET #OffsetRows ROWS
FETCH NEXT #PageSize ROWS ONLY
and another one supposed to return some Guids
ALTER PROCEDURE [dbo].[ret_PayrollCalculations_GetFilteredPersonnels]
(
#CalculationCommandType int,
#StartWorkingPeriodId int,
#StartYear int,
#EndWorkingPeriodId int,
#EndYear int,
#Status int,
#SalariedGuid uniqueidentifier,
#SalariedType int,
#OfficeNumber varchar(64),
#SalariedResultSetId int,
#Keyword nvarchar(2024),
#OperationalUnitIds [dbo].[ListOfID] READONLY
)
AS
DECLARE #AccessibleSalariedGuids [dbo].[ListOfGuid]
IF EXISTS (SELECT * FROM #OperationalUnitIDs)
BEGIN
INSERT INTO #AccessibleSalariedGuids
SELECT FeatureGuid FROM prs_OperationalUnitFeatures
WHERE
OperationalUnitID in (SELECT * FROM #OperationalUnitIDs) AND
FeatureFlag IN (2,4)
END
ELSE BEGIN
INSERT INTO #AccessibleSalariedGuids
SELECT [Guid] FROM ret_vwSalaried
END
SELECT
calcs.[Guid]
FROM
ret_PayrollCalculationCommands command INNER JOIN
ret_PayrollCalculations calcs ON calcs.[CalculationCommandGuid] = command.[Guid] INNER JOIN
ret_vwSalaried salaried ON calcs.[SalariedGuid] = salaried.[Guid]
WHERE
ISNULL(calcs.[MainCalculation],0) = 1 AND
ISNULL(command.[Deleted],0)=0 AND
(#Keyword = '' OR salaried.PersonnelNo = #Keyword OR salaried.FullName LIKE N'%' + #Keyword + '%' OR salaried.FullNameReversed LIKE N'%' + #Keyword + '%') AND
(ISNULL(#calculationCommandType, 0) = 0 OR command.[Type] = #calculationCommandType) AND
(ISNULL(#StartYear, 0) = 0 OR command.[MainYear] >= #StartYear) AND
(ISNULL(#StartWorkingPeriodId, 0) = 0 OR command.[MainWorkingPeriodID] >= #StartWorkingPeriodId) AND
(ISNULL(#EndYear, 0) = 0 OR command.[MainYear] <= #EndYear) AND
(ISNULL(#EndWorkingPeriodId, 0) = 0 OR command.[MainWorkingPeriodID] <= #EndWorkingPeriodId) AND
(ISNULL(#Status, -1) = -1 OR command.[Approved] = #Status) AND
(ISNULL(#SalariedType, -1) = -1 OR salaried.[SalariedType] = #SalariedType) AND
(ISNULL(#SalariedGuid,'00000000-0000-0000-0000-000000000000') = '00000000-0000-0000-0000-000000000000' OR calcs.[SalariedGuid] = #SalariedGuid) AND
(#OfficeNumber IS NULL OR salaried.[OfficeNumber] LIKE '%'+#OfficeNumber+'%') AND
(ISNULL(#SalariedResultSetId, -1) = -1 OR calcs.[SalariedGuid] IN (SELECT [SalariedGuid] FROM ret_SalariedResultSetItems WHERE SalariedResultSetID = #SalariedResultSetId)) AND
(calcs.[SalariedGuid] IN (SELECT * FROM #AccessibleSalariedGuids))
When a bug appears I have to fix the problem in both stored procedures, to avoid duplication I wanted Where clauses in a function and call the function in stored procedures,
But I don't know how?
This is how I would approach this:
If you're using Microsoft sql-server, you can make transact-sql code.
Convert your sql procedure into a string and make the Where clause a text variable that you declare elsewhere.
So it's creating a meta- procedure.
For eg.
DECLARE #whereClause LONGTEXT;
DECLARE #SQLString LONGTEXT;
SET #whereClause = 'i=1'
SET #SQLString = 'SELECT * FROM table WHERE' & #whereClause
sp_executesql SQLString
I have a very complex stored procedure and i am not that strong in SQL, please any one who has a strong SQL expertise and can help me optimize or at least can give me a hint, the procedure selects the inbox messages from database for specific user and it contains many other parameters such as paging and categories and also language input and many other details:
ALTER PROCEDURE [dbo].[Inbox]
#ConfidentialityIds NVARCHAR(100) = '0,1,2,3',
#UrgencyIds NVARCHAR(100) = '0,1,2,3',
#CorrespondenceCategoryIds NVARCHAR(100) = '1,2,3,5,6,7',
#CorrespondenceExtendedCategoryIds NVARCHAR(MAX),
#IsPrivate bit = 0,
#IsSaved bit = 0,
#Importantance VARCHAR(10) = '0, 1',
#UserId uniqueidentifier,
#SelectedPage int = 1,
#PageSize int = 25,
#Now bigint,
#IsImpersonated bit,
#ActualLoggedInUserId uniqueidentifier,
#IsEnglish bit,
#OnlyArchived bit = null,
#replaceNameWithEntName bit,
#entityIds nvarchar(MAX),
#OnlyLate bit = 0,
#Statuses NVARCHAR(100) ='1,2,3,4,5',
#ApplyPageFilter bit = 1,
#IsBundled int,
#showArchivedInCCInbox bit = 0,
#appModuleId INT = 0
WITH RECOMPILE
As
BEGIN
SET transaction isolation level read uncommitted
DECLARE #lFirstRec INT, #lLastRec INT, #lTotalRows INT
SET #lFirstRec = ( #SelectedPage - 1 ) * #PageSize
SET #lLastRec = ( #SelectedPage * #PageSize + 1 )
SET #lTotalRows = #lFirstRec - #lLastRec + 1
DECLARE #isPersonalDelegationAvailable BIT = 0
IF EXISTS(
SELECT 1
FROM DelegatedToEntityUsers d
WHERE d.DelegatedToUserId = #ActualLoggedInUserId
AND d.DelegatedFromUserId = #UserId
AND
(
d.DelegatedToEntityId IS NULL OR d.DelegationType = 1
))
BEGIN
SET #isPersonalDelegationAvailable = 1
END
DECLARE #tblEntities TABLE(Value INT)
INSERT INTO #tblEntities
SELECT Value FROM SplitCommaUniqueValues(#entityIds)
Select * from (
Select (ROW_NUMBER() OVER (ORDER BY K.ActionDate DESC, K.CorrespondenceDate DESC)) AS RowIndex,
Count(*) over () AS TotalCount,*
from (
select (ROW_NUMBER() OVER (PARTITION BY CorrespondenceID Order by CorrespondenceID DESC)) AS CorrId, *
from (
SELECT Distinct * FROM
(
SELECT
CONVERT(VARCHAR(100), R.CorrespondenceActionRecipientID) Id,
A.CorrespondenceActionID ActionId,
(CASE WHEN R.RecipientType IS NULL THEN NULL ELSE CAST(RecipientType AS INT) END) RecipientType,
A.ActionTypeId,
(CASE when #IsEnglish = 1 then ATypes.FriendlyTextEN else ATypes.FriendlyTextAR end) ActionTypeName,
A.ActionCreatedByUserID SentById,
CASE
when #replaceNameWithEntName = 0 then ISNULL(ActionCreatedByUser.ShortName, ActionCreatedByUser.EmployeeName)
when #replaceNameWithEntName = 1 and SentByEntity.EntityID not in (SELECT Value FROM #tblEntities) then case when #IsEnglish = 1 then SentByEntity.EntityNameEn else SentByEntity.EntityNameAR end
when #replaceNameWithEntName = 1 and SentByEntity.EntityID in (SELECT Value FROM #tblEntities) then ISNULL(ActionCreatedByUser.ShortName, ActionCreatedByUser.EmployeeName)
END SentByFrom,
A.WithDelegateFromUserID OnBehalfOfId,
ISNULL(WithDelegateFromUser.ShortName, WithDelegateFromUser.EmployeeName) OnBehalfOfName,
R.UserId SentToId,
CASE
when #replaceNameWithEntName = 0 then ISNULL(SentToUser.ShortName, SentToUser.EmployeeName)
when #replaceNameWithEntName = 1 and SentToEntity.EntityID not in (SELECT Value FROM #tblEntities) then case when #IsEnglish = 1 then SentToEntity.EntityNameEn else SentToEntity.EntityNameAR end
when #replaceNameWithEntName = 1 and SentToEntity.EntityID in (SELECT Value FROM #tblEntities) then isnull(ISNULL(SentToUser.ShortName, SentToUser.EmployeeName), case when #IsEnglish = 1 then SentToEntity.EntityNameEn else SentToEntity.EntityNameAR end)
END SentToName,
R.EntityID SentToEntityId,
SentToEntity.EntityNameAR SentToEntityNameAR,
SentToEntity.EntityNameEN SentToEntityNameEN,
R.Seen,
(CASE WHEN MR.CorrespondenceActionRecipientID IS NOT NULL THEN CAST(1 AS BIT) ELSE CAST(0 AS BIT) END) IsReadByUser,
CAST(ISNULL(FollowedByUser.IsFollowedByUser, 0) AS BIT) IsFollowedByUser,
(
CASE WHEN EXISTS(SELECT 1 FROM CorrespondenceFollowups
WHERE CorrespondenceID = C.CorrespondenceID
AND UserId = #UserId AND AssignedByUserId IS NOT NULL) THEN CAST(1 AS BIT)
ELSE CAST(0 AS BIT) END
) IsAssignedFollowToUser,
(
CASE WHEN EXISTS(SELECT 1 FROM CorrespondenceFollowups
WHERE CorrespondenceID = C.CorrespondenceID
AND AssignedByUserId = #UserId) THEN CAST(1 AS BIT)
ELSE CAST(0 AS BIT) END
) IsAssignedFollowByUser,
A.CorrespondenceID,
A.ActionDate,
A.ActionDeadlineDate,
C.CompletionDate,
C.CorrespondenceDeadlineDate CorrDeadlineDate,
C.OwnerUserID CorrOwnerId,
C.ChildNo ChildNo,
OwnerUser.EmployeeName CorrOwnerName,
C.Important,
C.UrgencyId,
C.LetterCorrespondenceId,
(CASE when #IsEnglish = 1 then U.TextEN else U.TextAR end) UrgencyText,
C.ConfidentialityId,
(CASE when #IsEnglish = 1 then Confid.TextEN else Confid.TextAR end) ConfidentialityText,
C.CorrespondenceCategoryId CategoryId,
C.CorrespondenceClassificationID CorrespondenceClassificationID,
(CASE when #IsEnglish = 1 then CCat.TextEN else CCat.TextAR end) CategoryName,
CCat.ColorClass ColorClass,
C.Subject,
c.CorrespondenceFormula,
C.InternalSenderEntityId,
C.InternalRecipientEntityId,
C.[Sequence] [Sequence],
C.Year,
C.CompletionStatus Status,
Null Number,
(CASE WHEN (
(
(A.ActionDeadlineDate IS NOT NULL AND A.ActionDeadlineDate < #Now)
OR
(C.CorrespondenceDeadlineDate IS NOT NULL AND C.CorrespondenceDeadlineDate < #Now)
)
AND
C.[Closed-Archived] = 0) THEN CAST(1 AS BIT) ELSE CAST(0 AS BIT) END) IsLate,
CAST(0 AS BIT) HasAnyEvents,
C.CreatedByUserId,
CreatedByUser.EmployeeName CreatedByUserName,
CAST(C.CorrespondenceDate AS VARCHAR(50)) CorrDate,
C.CorrespondenceDate,
C.[Closed-Archived] ClosedArchived,
C.IsSaved SavedActionTaken,
((CASE WHEN C.Important = 1 THEN CASE WHEN #IsEnglish = 1 THEN N'Important' ELSE N'هامة' END ELSE '' END) + (CASE WHEN C.Important = 1 AND C.UrgencyID <> 0 THEN CASE WHEN #IsEnglish = 1 THEN N' and ' ELSE N' و ' END ELSE '' END) + (CASE WHEN C.UrgencyID <> 0 THEN (CASE when #IsEnglish = 1 then U.TextEN else U.TextAR end) ELSE '' END)) ImportantUrgencyText,
CAST(C.IsAutoSaved AS BIT) IsAutoSaved,
-- *******************************************************************
rem.ReminderDate as CorrespondenceReminderDateTime,
remAction.ReminderDate as ActionReminderDateTime
FROM (
SELECT * FROM Correspondences CC
WHERE CC.IsDeleted = 0
AND CC.LetterCorrespondenceId IS NULL
AND (CC.ConfidentialityId IN (SELECT [Value] FROM SplitCommaUniqueValues(#ConfidentialityIds)))
AND
( #IsPrivate = 0 OR
(
#IsPrivate = 1 AND CC.IsForPresident = 1
)
)
AND
(
(CC.IsSaved = case when #IsSaved =1 then 1 else CC.IsSaved end)
)
AND (#appModuleId = 0 OR CC.AppModuleId = #appModuleId)
AND (CC.UrgencyID IN (SELECT value FROM SplitCommaUniqueValues(#UrgencyIds)))
AND (CC.Important IN (SELECT value FROM SplitCommaUniqueValues(#Importantance)))
AND CC.CompletionStatus IN(SELECT value FROM SplitComma(#Statuses))
) C
LEFT JOIN CorrespondenceExtendedDetails CorrExt
ON CorrExt.CorrespondenceID = C.CorrespondenceID
LEFT JOIN CorrespondenceActions A
ON C.CorrespondenceID = A.CorrespondenceID
AND A.IsDeleted = 0
AND A.ActionTypeID != 7 -- إنهاء التذكير
LEFT JOIN CorrespondenceActionRecipients R
ON A.CorrespondenceActionID = R.CorrespondenceActionID
AND (
R.AsCopy = 1
)
JOIN Urgencies U
ON C.UrgencyID = U.ID
JOIN ActionTypes ATypes
ON A.ActionTypeID = ATypes.ID
JOIN CorrespondenceCategories CCat
ON C.CorrespondenceCategoryId = CCat.ID
JOIN Confidentialities Confid
ON C.ConfidentialityID = Confid.ID
LEFT JOIN Users ActionCreatedByUser
ON A.ActionCreatedByUserID = ActionCreatedByUser.UserId
LEFT JOIN Users WithDelegateFromUser
ON A.WithDelegateFromUserID = WithDelegateFromUser.UserID
LEFT JOIN Entities SentByEntity
ON A.ActionCreatedByUserEntityId = SentByEntity.EntityID
LEFT JOIN Users SentToUser
ON R.UserId = SentToUser.UserId
LEFT JOIN Entities SentToEntity
ON R.EntityID = SentToEntity.EntityID
LEFT JOIN Users OwnerUser
ON C.OwnerUserID = OwnerUser.UserId
LEFT JOIN Users CreatedByUser
ON C.CreatedByUserID = CreatedByUser.UserId
LEFT JOIN MarkAsReads MR
ON R.CorrespondenceActionRecipientID = MR.CorrespondenceActionRecipientID
AND MR.UserId = #UserId
OUTER APPLY
(
SELECT TOP 1 1 IsFollowedByUser
FROM CorrespondenceFollowups CF
WHERE CF.CorrespondenceId = C.CorrespondenceID
AND CF.UserId = #UserId
AND CF.AssignedByUserId IS NULL
) FollowedByUser
-- *******************************************************************
LEFT JOIN LinkedCorrespondenceSchedules CS on CS.CorrespondenceID = C.CorrespondenceID
LEFT JOIN Reminder rem on rem.ReferenceId=C.CorrespondenceID AND rem.ReferenceType = 1 AND rem.CreatedByUserId=#UserId AND (rem.[Status] = 1 OR rem.[Status] = 2)
Left JOIN Reminder remAction on remAction.ReferenceId = A.CorrespondenceActionID AND remAction.ReferenceType = 2 AND remAction.CreatedByUserId=#UserId AND (remAction.[Status] = 1 OR remAction.[Status] = 2)
-- *******************************************************************
WHERE (
(C.CorrespondenceCategoryId IN (SELECT Value FROM SplitComma(#CorrespondenceCategoryIds)) AND CorrExt.CorrespondenceExtendedCategoryId IS NULL)
OR (CorrExt.CorrespondenceExtendedCategoryId IN (SELECT Value FROM SplitComma(#CorrespondenceExtendedCategoryIds)))
)
AND
(
-- Personal
(
(
(#IsImpersonated = 0 AND R.UserId = #UserId)
OR
(#IsImpersonated = 1 AND R.UserId = #UserId AND #isPersonalDelegationAvailable = 1)
)
AND R.RecipientType = 1 AND R.UserId Is Not null
)
OR
-- Me as Manager (Impersonation mode handled from code by sending the proper Entity Ids.
(
(R.EntityID IN (SELECT Value FROM #tblEntities) AND R.EntityID Is Not null AND R.RecipientType != 1)
)
)
AND C.[Closed-Archived] = Case When #showArchivedInCCInbox = 1 Then 0 Else C.[Closed-Archived] End
AND R.UserTokeAction = 0
AND NOT EXISTS (
SELECT 1 FROM Correspondences CC
INNER JOIN CorrespondenceLinks CL
ON CC.CorrespondenceID = CL.LinkedCorrespondenceID AND CC.CorrespondenceID = C.CorrespondenceID AND CL.LinkTypeID = #IsBundled
)
) T
WHERE T.LetterCorrespondenceId is null
) as ttt
) K where CorrId = 1
)N where (#ApplyPageFilter = 0 OR ( RowIndex > #lFirstRec AND RowIndex < #lLastRec))
Order by
ActionDate DESC, CorrespondenceDate
option(recompile)
END
I have a rather long Sql query that needs different where clauses depending on user choices.
I have done some searching, and this seems to be the most comprehensive article on the matter.
However, it doesn't mention the option of using the table valued function to achieve the same effect, and to me, this seems to be the most optimum answer.
Am I missing something?
Here is my catch all query written with the TVF:
--These paramenters will always be passed
declare #tenantId int = 7;
declare #yesterday DateTime = dateadd(day,datediff(day,1,GETUTCDATE()),0);
declare #tomorrow DateTime = dateadd(day,datediff(day,-1,GETUTCDATE()),0);
--These are optional:
declare #parentId int = 230; --In this example, #parentId is populated.
declare #ownedById int = null; --In this example, #ownedBy is not populated.
--Simple if statement:
if #parentId is not null
BEGIN
if #ownedById is not null
BEGIN
Select * from GetItemInfos(#tenantId, #yesterday, #tomorrow)
where ParentId = #parentId and OwnedById = #ownedById;
END
ELSE
Select * from GetItemInfos(#tenantId, #yesterday, #tomorrow)
where ParentId = #parentId;
END
ELSE IF #ownedById is not null
BEGIN
Select * from GetItemInfos(#tenantId, #yesterday, #tomorrow)
where OwnedById = #ownedById;
END
ELSE
Select * from GetItemInfos(#tenantId, #yesterday, #tomorrow);
And here is the TVF:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION GetItemInfos
(
#tenantId int,
#yesterday DateTime,
#tomorrow DateTime
)
RETURNS TABLE
AS
RETURN
(
Select i.Id,
i.AssignedToId,
i.ParentId,
i.OwnedById,
i.Budget,
i.CloseDate,
i.CloseStatusId,
AssignedToName = Concat(anu.FirstName, ' ', anu.LastName),
OwnedByName = Concat(anu2.FirstName, ' ', anu2.LastName),
CloseStatusName = cs.Name,
i.ItemTypeId,
ItemTypeIcon = it.Icon,
i.ImportanceTypeId,
ImportanceTypeDescription = ImportanceTypes.Description,
i.EntityStatusId,
i.DueDate,
IsOverdue =
case when i.CloseStatusId = 1 and i.DueDate <= #yesterday then Cast(1 as bit)
else Cast(0 as bit)
end,
IsDue =
case when i.CloseStatusId = 1 and i.DueDate >= #yesterday and i.DueDate < #tomorrow then cast(1 as bit)
else Cast(0 as bit)
end,
IsClosed = case when (i.CloseStatusId != 1) then cast(1 as bit) else cast(0 as bit) end,
i.Cost,
ItemTypeShowProperties = it.ShowProperties,
ItemTypeSortOrder = it.SortOrder,
PriorityTypeDescription = PriorityTypes.Description,
PriorityTypeSortOrder = PriorityTypes.SortOrder,
i.Name,
i.PriorityTypeId,
Progress = Convert(nvarchar, i.Progress) + '%',
i.SortOrder,
i.StartDate,
StatusTypeName = StatusTypes.Name,
i.TimeEstimate,
TimeScaleTypeName = TimeScaleTypes.Name
from Items i
left join AppUsers au
on i.AssignedToId = au.Id
left join AspNetUsers anu
on au.AspNetUserId = anu.id
left join AppUsers au2
on i.OwnedById = au2.Id
left join AspNetUsers anu2
on au2.AspNetUserId = anu2.id
left join CloseStatuses cs
on i.CloseStatusId = cs.id
left join ItemTypes it
on i.ItemTypeId = it.Id
left join ImportanceTypes
on i.ImportanceTypeId = ImportanceTypes.Id
left join PriorityTypes
on i.PriorityTypeId = PriorityTypes.Id
left join StatusTypes
on i.StatusTypeId = StatusTypes.Id
left join TimeScaleTypes
on i.TimeScaleTypeId = TimeScaleTypes.Id
where i.TenantId = #tenantid
)
GO
EDIT
Based on the comments, this seems to be the best way to write this:
Select * from GetItemInfos(#tenantId, #yesterday, #tomorrow)
where (#parentId is null or ParentId = #parentId) and (#ownedById is null or OwnedById = #ownedById) OPTION(RECOMPILE)
I have the store sql
ALTER procedure [dbo].[TNNews_User_SearchBasic]
#Title nvarchar(400),
#CategoryId int,
#IsInterested int,
#IsHot int,
#IsTopCategory int,
#IsPublish int,
#PageSize int,
#PageIndex int,
#OrderBy varchar(20),
#PortalId int,
#LanguageId varchar(6)
as
DECLARE #EndTime DATETIME
DECLARE #StartTime DATETIME
SET #StartTime = GETDATE()
declare #tbCategory table(Id int)
DECLARE #StartRowIndex INT
IF #PageSize=0 SELECT #PageSize=count(*) FROM TNNews
IF(#PageIndex<0) SET #PageIndex=0
SET #StartRowIndex = #PageSize*(#PageIndex-1)+1
;WITH tmpCategory(Id, Name,ParentId,Level)
AS (
SELECT
e.Id,
e.Name,
e.ParentId,
1
FROM dbo.TNCategory AS e
WHERE
Id = #CategoryId or (#CategoryId='' and ParentId<=0)
UNION ALL
SELECT
e.Id,
e.Name,
e.ParentId,
Level + 1
FROM dbo.TNCategory AS e
JOIN tmpCategory AS d ON e.ParentId = d.Id
)
insert #tbCategory select Id from tmpCategory
;WITH tmpNews as
(
SELECT
a.Id,a.Title,a.Subject
,ROW_NUMBER() OVER (ORDER BY (Publisheddate) desc) as ThuTuBanGhi
FROM dbo.TNNews a
where 1 = 1
--and ( Title like '%'+#Title+'%')
and (#CategoryId = -1 or exists (select 0 from #tbCategory b where b.Id = a.CategoryId))
and (#IsInterested = -1 or IsIntrested = #IsInterested )
and (#IsHot = -1 or IsHot = #IsHot )
and (#IsTopCategory = -1 or IsTopCategory = #IsTopCategory )
and (#IsPublish = -1 or IsPublished = #IsPublish)
and PortalId=#PortalId
and LanguageId = #LanguageId
)
select *, (select COUNT(Id) from tmpNews) as 'TongSoBanGhi' from tmpNews
WHERE
ThuTuBanGhi BETWEEN (#StartRowIndex) AND (#StartRowIndex + #PageSize-1)
SET #EndTime = GETDATE()
PRINT 'StartTime = ' + CONVERT(VARCHAR(30),#StartTime,121)
PRINT ' EndTime = ' + CONVERT(VARCHAR(30),#EndTime,121)
PRINT ' Duration = ' + STR(DATEDIFF(MILLISECOND,#StartTime,#EndTime)) + ' millisecond'
select STR(DATEDIFF(MILLISECOND,#StartTime,#EndTime))
After this store excute
EXEC [dbo].[TNNews_User_SearchBasic]
#Title='',
#CategoryId = '',
#IsInterested = -1,
#IsHot = -1,
#IsTopCategory = -1,
#IsPublish = -1,
#PageSize = 20,
#PageIndex = 1,
#OrderBy = '',
#PortalId = 0,
#LanguageId = N'vi-VN'
go
The time excute about "200ms". And I create a new store "TNNews_User_SearchBasic1" with some change.
.....
--,ROW_NUMBER() OVER (ORDER BY (Publisheddate) desc) as ThuTuBanGhi
,ROW_NUMBER() OVER (ORDER BY (case when #OrderBy='VIEW_COUNT' then ViewCount else PublishedDate end) desc) as ThuTuBanGhi
.....
and now the time excute this store
EXEC [dbo].[TNNews_User_SearchBasic1]
#Title='',
#CategoryId = '',
#IsInterested = -1,
#IsHot = -1,
#IsTopCategory = -1,
#IsPublish = -1,
#PageSize = 20,
#PageIndex = 1,
#OrderBy = '',
#PortalId = 0,
#LanguageId = N'vi-VN'
GO
about 900ms.
I don't understand why there is a change. Please help me improve these stores.
PS: I put example db at: http://anhquan22.tk/Portals/0/Videos/web.rar
Finished analysis the structure of your database. The part of the problem is hiding in the table structure.
I have prepared a backup for you. In it, I slightly modified scheme to improve performance and some normalize the table. You can download it from this link.
...to your question, I would do like this -
DECLARE #SQL NVARCHAR(1000)
SELECT #SQL = N'
;WITH tmpCategory (Id, Name, ParentId, [Level]) AS
(
SELECT
e.Id
, e.Name
, e.ParentId
, 1
FROM dbo.TNCategory e
WHERE Id = #CategoryId OR (#CategoryId = '''' AND ParentId <= 0)
UNION ALL
SELECT
e.Id
, e.Name
, e.ParentId
, [Level] + 1
FROM dbo.TNCategory e
JOIN tmpCategory d ON e.ParentId = d.Id
)
SELECT
a.Id
, ROW_NUMBER() OVER (ORDER BY ' +
CASE WHEN #OrderBy = 'VIEW_COUNT'
THEN 'ViewCount'
ELSE 'PublishedDate'
END +' DESC) AS ThuTuBanGhi
FROM dbo.TNNewsMain a
where PortalId = #PortalId
AND LanguageId = #LanguageId'
+ CASE WHEN #IsInterested != -1 THEN ' AND IsInterested = #IsInterested' ELSE '' END
+ CASE WHEN #IsHot != -1 THEN ' AND IsHot = #IsHot' ELSE '' END
+ CASE WHEN #IsTopCategory != -1 THEN ' AND IsTopCategory = #IsTopCategory' ELSE '' END
+ CASE WHEN #IsPublish != -1 THEN ' AND IsPublish = #IsPublish' ELSE '' END
+ CASE WHEN #CategoryId != -1 THEN '' ELSE ' AND EXISTS(SELECT 1 FROM tmpCategory b WHERE b.Id = a.CategoryId)' END
INSERT INTO #temp (Id, ThuTuBanGhi)
EXECUTE sp_executesql
#SQL
, N'#PortalId INT
, #LanguageId VARCHAR(6)
, #CategoryId INT
, #IsInterested INT
, #IsHot INT
, #IsTopCategory INT
, #IsPublish INT'
, #PortalId = #PortalId
, #LanguageId = #LanguageId
, #CategoryId = #CategoryId
, #IsInterested = #IsInterested
, #IsHot = #IsHot
, #IsTopCategory = #IsTopCategory
, #IsPublish = #IsPublish;
SELECT
d.Id
, tm.Title
, tm.[Subject]
, d.ThuTuBanGhi
, c.TongSoBanGhi
FROM (
SELECT t.Id
, t.ThuTuBanGhi
FROM #temp t
WHERE t.ThuTuBanGhi BETWEEN #StartRowIndex AND #StartRowIndex + #PageSize - 1
) d
JOIN TNNewsMain tm ON d.Id = tm.Id
CROSS JOIN (
SELECT TongSoBanGhi = (SELECT COUNT(1) FROM #temp)
) c