I am trying to use convert in an where clause in the select statement. My query looks like this:
SELECT DISTINCT TOP 10 [SurveyResult].*
,[Ticket].[RefNumber]
FROM [SurveyResult]
LEFT JOIN [Ticket] ON [SurveyResult].[TicketID] = [Ticket].[TicketID]
JOIN [SurveyResponse] AS SurveyResponse1 ON [SurveyResult].[ResultID] = SurveyResponse1.[ResultID]
JOIN [QuestionAnswer] AS QuestionAnswer1 ON SurveyResponse1.[AnswerID] = QuestionAnswer1.[AnswerID]
JOIN [SurveyQuestion] AS SurveyQuestion1 ON QuestionAnswer1.[QuestionID] = SurveyQuestion1.[QuestionID]
WHERE SurveyQuestion1.[SurveyID] = [SurveyResult].[SurveyID]
AND SurveyQuestion1.[QuestionID] = 'C86CB39A-8FE0-4FE8-B38F-17F1BE611016'
AND CONVERT(INT, SurveyResponse1.[Response]) >= 1
AND CONVERT(INT, SurveyResponse1.[Response]) <= 5
The problem is that I get some errors when converting the values to integer in the where statement.
I know I have some rows that don't contain numbers in the Response column but I filter those so without the convert part in the where clause I get only numbers so it works like this:
SELECT TOP 1000 [ResponseID]
,[ResultID]
,[Response]
FROM [WFSupport].[dbo].[SurveyResponse]
JOIN QuestionAnswer ON SurveyResponse.AnswerID = QuestionAnswer.AnswerID
WHERE QuestionAnswer.QuestionID = 'C10BF42E-5D51-46BC-AD89-E57BA80EECFD'
And in the results I get numbers but once I add the convert part in the statement I I get an error that it can't convert some text to numbers.
Either do like Mark says or just have NULL values default to something numerical, this would give you a where statement like:
WHERE SurveyQuestion1.[SurveyID] = [SurveyResult].[SurveyID]
AND SurveyQuestion1.[QuestionID] = 'C86CB39A-8FE0-4FE8-B38F-17F1BE611016'
AND CONVERT(INT, ISNULL(SurveyResponse1.[Response],0)) BETWEEN 1 AND 5
The important part is the ISNULL() function and I also used BETWEEN to avoid duplicate converts.
Try:
SELECT DISTINCT TOP 10
[SurveyResult].*,
[Ticket].[RefNumber]
FROM
[SurveyResult]
LEFT JOIN [Ticket] ON [SurveyResult].[TicketID] = [Ticket].[TicketID]
JOIN [SurveyResponse] AS SurveyResponse1
ON [SurveyResult].[ResultID] = SurveyResponse1.[ResultID]
JOIN [QuestionAnswer] AS QuestionAnswer1
ON SurveyResponse1.[AnswerID] = QuestionAnswer1.[AnswerID]
JOIN [SurveyQuestion] AS SurveyQuestion1
ON QuestionAnswer1.[QuestionID] = SurveyQuestion1.[QuestionID]
where SurveyQuestion1.[SurveyID] = [SurveyResult].[SurveyID]
AND SurveyQuestion1.[QuestionID] = 'C86CB39A-8FE0-4FE8-B38F-17F1BE611016'
AND CASE SurveyQuestion1.[QuestionID]
WHEN 'C86CB39A-8FE0-4FE8-B38F-17F1BE611016'
THEN Convert(int, SurveyResponse1.[Response])
ELSE 0
END BETWEEN 1 AND 5
(The AND SurveyQuestion1.[QuestionID] = 'C86CB39A-8FE0-4FE8-B38F-17F1BE611016' is retained in case the query is using an index on QuestionID - if not, it can be removed, as the same condition is implicit in the subsequent CASE condition.)
Try this one -
SELECT DISTINCT TOP 10 sr.*, t.[RefNumber]
FROM dbo.SurveyResult sr
JOIN dbo.SurveyResponse sr2 ON sr.[ResultID] = sr2.[ResultID]
JOIN dbo.QuestionAnswer sa ON sr2.[AnswerID] = sa.[AnswerID]
JOIN dbo.SurveyQuestion sq ON sa.[QuestionID] = sq.[QuestionID] AND sq.[SurveyID] = sr.[SurveyID]
LEFT JOIN dbo.Ticket t ON sr.[TicketID] = t.[TicketID]
WHERE sq.[QuestionID] = 'C86CB39A-8FE0-4FE8-B38F-17F1BE611016'
AND CAST(ISNULL(sr2.[Response], 0) AS INT) BETWEEN 1 AND 5
Related
I'm trying to add a conditional SELECT column in a query and I'm having trouble writing it out:
SELECT v.GLTypeID,
v.something,
v.somethignElse,
CASE WHEN (SELECT TOP 1 Value FROM InterfaceParam WHERE InterfaceId = 0 AND Descr = 'gf') = 1 THEN a.CreditID ELSE NULL END AS CreditMemoID
FROM vGLDetails2 v
....
LEFT OUTER JOIN AssociationFund f
ON v.FundID = f.FundID
LEFT JOIN dbo.APLedger a ON v.RelID = a.APLedgerID AND v.RelTypeID IN (39, 40)
....
ORDER BY v.Code;
The query above works, however if the CASE statement is still returning an additional column regardless of the result of the subquery. How can I remove it if the subquery doesn't return a row?
How can I do this?
Change the location of AS. For example:
SELECT v.GLTypeID,
v.something,
v.somethignElse,
CASE WHEN (
SELECT TOP 1 Value
FROM InterfaceParam
WHERE InterfaceId = 0 AND Descr = 'creditMemo') = 1
THEN a.CreditID -- AS is not valid here
END AS CreditMemoID -- AS is valid here
FROM vGLDetails2 v
....
LEFT OUTER JOIN AssociationFund f
ON v.FundID = f.FundID
LEFT JOIN dbo.APLedger a ON v.RelID = a.APLedgerID AND v.RelTypeID IN (39, 40)
....
ORDER BY v.Code;
Note: I removed ELSE NULL since this is the default behavior of CASE.
Can anyone help me try to solve this equation? The "Lost_Weight" is a calculation field and I'm trying to get the result of HWeight - renWeight = '0' if the renWeight is 0. The where clause has a controversial statement that put a Challenge to me to make that happen. See below.
SELECT TOP (100) PERCENT dbo.Name.ID,
dbo.Name.CO_ID,
dbo.Name.FULL_NAME,
dbo.Name.STATE_PROVINCE, dbo.Tops_Profile.START_WGHT,
dbo.Tops_Profile.RENEWAL_WEIGHT,
dbo.Tops_Profile.H_WEIGHT - dbo.Tops_Profile.RENEWAL_WEIGHT AS Lost_Weight,
dbo.Tops_Profile.H_WEIGHT,
dbo.Name.JOIN_DATE,
dbo.Name.BIRTH_DATE,
RIGHT(dbo.TOPS_AWARDS.AWARD_TYPE, 15) AS AWARDS_TYPE,
dbo.TOPS_AWARDS.AWARD_CATEGORY,
dbo.TOPS_AWARDS.AWARD_DATE,
dbo.vw_RegDirs.TARGET_ID AS
RD_ID,
dbo.vw_Coords.TARGET_ID AS Coord_ID,
dbo.vw_Coords.FULL_NAME AS
Coord_Name,
dbo.vw_AreaCapts.TARGET_ID AS AC_ID, dbo.Name.STATUS
FROM dbo.Name INNER JOIN dbo.Tops_Profile
ON dbo.Name.ID = dbo.Tops_Profile.ID
INNER JOIN dbo.vw_RegDirs
ON dbo.Name.CO_ID = dbo.vw_RegDirs.CHAPTER
INNER JOIN dbo.vw_Coords
ON dbo.Name.CO_ID = dbo.vw_Coords.CHAPTER
INNER JOIN dbo.vw_AreaCapts
ON dbo.Name.CO_ID = dbo.vw_AreaCapts.CHAPTER
LEFT OUTER JOIN dbo.TOPS_AWARDS
ON dbo.Name.ID = dbo.TOPS_AWARDS.ID
WHERE (dbo.Tops_Profile.RENEWAL_WEIGHT <> '0')
AND (dbo.Name.STATUS = 'a')
AND (dbo.Tops_Profile.H_WEIGHT - dbo.Tops_Profile.RENEWAL_WEIGHT >= 100')
OR (dbo.Name.STATUS = 'a') AND (dbo.TOPS_AWARDS.AWARD_TYPE LIKE '%Century%')
right now if the renewal_weight is 0 it automatically give me the number from the H_WEIGHT in the Lost_Weight field and I need the result to be 0 if the RENEWAL_WEIGHT is 0.
I'm guessing 0 is a special value in this situation. This can be fixed by using CASE
Replace
dbo.Tops_Profile.H_WEIGHT - dbo.Tops_Profile.RENEWAL_WEIGHT AS Lost_Weight
With
CASE WHEN RENEWAL_WEIGHT = 0 THEN 0
ELSE dbo.Tops_Profile.H_WEIGHT - dbo.Tops_Profile.RENEWAL_WEIGHT
END AS Lost_Weight
I am writing a stored procedure that adds the counts to two fields. I have the following code:
SELECT Distinct DateTime1,SUM(TICKETREQ1)SUMREQ, SUM(TicketPU1)SUMPU1, (count(*))AS GRADCOUNT
FROM TABLEA
WHERE YEAR = '2015'
AND TicketReq1 > 0
group by DateTime1
Select DISTINCT(DateTime2),SUM(TicketReq2) SUMREQ,SUM(TicketPU2)SUMPU2, (count(*))AS GRADCOUNT
from TABLEA
where TicketReq2 > 0
and YEAR = '2015'
Group by DateTime2;
SELECT Distinct c.DateTime1,SUM(c.TICKETREQ1 + b.TicketReq2)SUMREQ, SUM(c.TicketPU1 + b.TicketPU2)SUMPU1, (count(b.id) + count(c.id))AS GRADCOUNT
FROM TABLEA c
LEFT JOIN TABLEA b
ON (b.DateTime2 = c.DateTime1
AND b.TicketReq2 > 0
AND b.YEAR = '2015')
WHERE c.YEAR = '2015'
AND c.TicketReq1 > 0
group by c.DateTime1
This returns:
For some ceremonies the second query does bring in results and adds them correctly. But if there are no records then it fails.
How can I get it to join the two counts together (Query 1 and 2) so that Query 3 displays both counts even when there is no match
The problem is the SUM statements on query #3. b.TicketReq2 is null, therefore SUM(c.TICKETREQ1 + b.TicketReq2) should encounter an error. Try using ISNULL(b.TicketReq2, 0) in your SUM function calls.
Try full outer join instead of left join
SELECT Distinct c.CeremonyDateTime1,SUM(c.TICKETREQ1 + b.TicketReq2)SUMREQ, SUM(c.TicketPU1 + b.TicketPU2)SUMPU1, (count(b.gid) + count(c.gid))AS GRADCOUNT
FROM ComTicket c
FULL OUTER JOIN ComTicket b
ON (b.CeremonyDateTime2 = c.CeremonyDateTime1
AND b.TicketReq2 > 0
AND b.Gradterm = '201540')
WHERE c.gradterm = '201540'
AND c.TicketReq1 > 0
group by c.CeremonyDateTime1
It might helpful to you..
I am trying to return data that will ultimately populate a label.
Each label is going onto a box, and the box can only have 4 items in it.
If a delivery has more than 4 items, then I need one label per 4.
Each row of data returned will populate one label, so if the delivery contains 9 items, then I need 3 rows of data returned.
Below is my current query, which is returning all items into a comma separated value using Stuff.
I want it so the first 4 rows for the delivery return in the first row, then the next 4 in the second and so on.
My Field LineOrd returns correctly if there are more than 4 lines on the dispatch.
select Distinct
delivery_header.dh_datetime,
delivery_header.dh_number,
order_header.oh_order_number as 'Order No',
order_header_detail.ohd_delivery_name,
order_header_detail.ohd_delivery_address1,
order_header_detail.ohd_delivery_address2,
order_header_detail.ohd_delivery_address3,
order_header_detail.ohd_delivery_town,
order_header_detail.ohd_delivery_county,
order_header_detail.ohd_delivery_postcode,
order_header_detail.ohd_delivery_country,
STUFF((Select ', '+convert(varchar(50),convert(decimal(8,0),DL.dli_qty))+'x '+OLI.oli_description
from delivery_header DH join delivery_line_item DL on DL.dli_dh_id = DH.dh_id join order_line_item OLI on OLI.oli_id = DL.dli_oli_id
Outer APPLY
(select
case when DelCurLine.CurLine <= 4
then '1'
Else
Case when DelCurLine.CurLine <= 8
then '2'
Else '3'
End
End +'-'+order_header.oh_order_number as LineOrd) as StuffLineOrder
Where DH.dh_id = delivery_header.dh_id And StuffLineOrder.LineOrd = LineOrder.LineOrd
FOR XML PATH('')),1,1,'') as Items,
LineOrder.LineOrd
from delivery_header
join delivery_line_item on delivery_line_item.dli_dh_id = delivery_header.dh_id
join order_line_item on order_line_item.oli_id = delivery_line_item.dli_oli_id
join order_header on order_header.oh_id = order_line_item.oli_oh_id
join order_header_detail on order_header_detail.ohd_oh_id = order_header.oh_id
join variant_detail on variant_detail.vad_id = order_line_item.oli_vad_id
join stock_location on stock_location.sl_id = order_line_item.oli_sl_id
Outer APPLY
(select count(DLI.dli_id) CurLine from delivery_line_item DLI where DLI.dli_dh_id = delivery_header.dh_id and DLI.dli_id <= delivery_line_item.dli_id)
as DelCurLine
Outer APPLY
(select
case when DelCurLine.CurLine <= 4
then '1'
Else
Case when DelCurLine.CurLine <= 8
then '2'
Else '3'
End
End +'-'+order_header.oh_order_number as LineOrd) as LineOrder
Outer APPLY
(select convert(varchar(50),convert(decimal(8,0),delivery_line_item.dli_qty))+'x '+order_line_item.oli_description as LineName) as LineName
where
delivery_header.dh_datetime between #DateFrom and #DateTo
and stock_location.sl_id = #StockLoc
and (order_header.oh_order_number = #OrderNo or #AllOrder = 1)
order by
delivery_header.dh_datetime,
delivery_header.dh_number,
order_header.oh_order_number,
order_header_detail.ohd_delivery_name,
order_header_detail.ohd_delivery_address1,
order_header_detail.ohd_delivery_address2,
order_header_detail.ohd_delivery_address3,
order_header_detail.ohd_delivery_town,
order_header_detail.ohd_delivery_county,
order_header_detail.ohd_delivery_postcode,
order_header_detail.ohd_delivery_country
You can use ROW_NUMBER() with a division by 4. This truncate the decimal because numerator is an interger. This give you group number with a maximum of four row in each group. You can then adjust your query to use this group number in a "group by" clause to return grouped rows into a single one.
Exemple here :
SELECT RawData.BoxGroup,
MIN(dh_datetime),
MIN(dh_number),
MIN(order_header.oh_order_number) as 'Order No'
--And so on
FROM
(SELECT BoxGroup = (ROW_NUMBER() OVER(ORDER BY (SELECT 1)) - 1) / 4,
*
FROM [TableNameOrQuery]) AS RawData
GROUP BY RawData.BoxGroup
Hope this help.
Given below is my select query in PostgreSQL
SELECT
gtab12.AcGrCode,
gtab12.AcId,
gtab12.AcName,
gtab11.AcgrName,
gtab16.VrDate,
gtab16.PDC,
cast(gtab16.VrDate as char(12)) as vdate,
gtab16.VrNo,
gtab16.Refno,
gtab02.VrName,
gtab17.Narr,
CASE WHEN gtab16.VrId = 6 THEN 0::decimal ELSE gtab17.Dr::decimal END AS Dr,
CASE WHEN gtab16.VrId = 6 THEN 0::decimal ELSE gtab17.Cr::decimal END AS Cr,
gtab16.AcyrId, gtab16.VrId,
coalesce(SUM(gtab17.Dr), 0::money) AS OpDr,
coalesce(SUM(gtab17.Cr), 0::money) AS OpCr ,
coalesce(SUM(gtab17.Dr), 0::money)AS OpperDr,
coalesce(SUM(gtab17.Cr), 0::money)AS OpperCr,
gtab47.AreaName,
gtab16.JrmId
FROM
gtab16
INNER JOIN gtab02 ON gtab16.VrId = gtab02.VrId
INNER JOIN gtab17 ON gtab16.JrMId = gtab17.JrmId
INNER JOIN gtab12 ON gtab17.AcId = gtab12.AcId
INNER JOIN gtab11 ON gtab12.AcGrCode = gtab11.AcgrCode
INNER JOIN gtab01 ON gtab16.AcyrId = gtab01.AcYrId
LEFT OUTER JOIN gtab22 ON gtab16.RepId = gtab22.RepId
LEFT OUTER JOIN gtab47 ON gtab12.AreaId = gtab47.AreaId
WHERE
(gtab17.AcId = gtab12.AcId) and gtab16.BranchID = 1 And vrdate Between
Cast('2014-04-01' AS timestamp) AND Cast('2014-09-27' AS timestamp) AND
(gtab16.AcYrId = 7) AND gtab16.VrId <> 6 And gtab12.acid <> 0
when executing am getting this error
ERROR: column "gtab12.acgrcode" must appear in the GROUP BY clause or
be used in an aggregate function
Note : before modifying this query the aggreagte functions are gathering from sub selects see it here
You are using aggregate functions (SUM) in some columns so you need to use aggregates functions on other ones or group by columns.
Bye, David.