I was hoping to get a bit of help regarding formulas in Excel/VBA, I'm looking to do the following but I'm not sure how best to do it:
Okay, so I have a materials export from a piece of software and it comes out with the following sort of data:
In essence I would like to have a catalogue stored on a separate sheet which the function references for text strings that may be contained in a takeoff.
i.e. in E2 the function will check the column B for cells containing the text strings in A16:A18 (the consoles) and return any results along with the corresponding quantity to columns E and F. Similarly this will occur for the controller and cables.
I'm sure there's a solution somewhere but I've been unable to find one for lack of knowing what to search exactly.
Thanks for any help guys, it's appreciated.
What you may want to use is the COUNTIF function. Try this:
COUNTIF(A$2:A$13,"*" & A16 & "*")
If I am not mistaken you can check for the values in A16:A23 in the database dump column B1:B13, then you want the summer quantity for the matching values, where a match means the text you look for must be contained in the database dump column.
To get the quantity accordingly use the following formula in cell B16:
=SUMIFS(C$2:C$13;B$2:B$13;"*"&A16&"*")
then drag it into the other cells. The asterisks are text wildcards, so there may be text in front or behind the text part we look for.
Related
I'm trying to Query some data in my spreadsheet, returning a manufacturer based on product code. We code our products with a three digit suffix that corresponds to different customers. I know the codes but people viewing the sheet may not.
Right now, I'm trying to split the suffix from the product and perform the wuery in the same formula.
I can do this in two steps, splitting the suffix from the code and querying just the suffix, but I want to know if I can do this all in one code. My current formula returns the data I want but it does not fill the entire range of the sheet. I would rather have this happen automatically as the workbook will be dynamic.
My current formula is:
=QUERY(CxSeries,"select B where C CONTAINS '"&right(Code,3)&"' ")
https://docs.google.com/spreadsheets/d/190kom4q0XOJP4UdLTJpZf5tuJCQTflcuokRp_FJ4pBc/edit?usp=sharing
I'm not sure if query is the right way to go about this, but I'd prefer to stick to that (just because i honestly can't wrap my head around ArrayForumlas).
Thank you,
Clear all formulas you have in column C and enter in C7
=ArrayFormula(vlookup(regexextract(D7:D16,"-(\d+)$")+0, {Sheet5!C6:C,Sheet5!B6:B}, 2, 0))
you most probably going to think "what an idiot" but remember i never done any type of coding before so this is all new to me,
My problem are that i'm working on a HUGE excel sheet with loads of data that is not needed. i need to sort the data into a few columns, i only need column "A,K,AN,AQ" but in column "AS" i only need certain values (yes,no,blank) i only want the yes and blank values. like i said never done any coding before but i know that you can use an macro to do it so please help, how do i go about this?
before trying to get into macros, try to use functions with if else statements. They are quite easy to handle. Like: If (yes) then put it into X. Later, you could select all needed. Also, check the, how the dollar sign is used
use this links to see, if it is something for you.
One quick and dirty way of getting this job done would be to:
Delete the columns you don't need.
Select all cells in the range you're interested in, click the Insert menu, and choose "Table". If your columns have titles, select the box for "My Table has Headers."
-This turns your data into an array so that Excel recognizes that each row is an entry (instead of thinking that the cells are unrelated).
Now you can use the filter icon in the column headers to select and display only the rows containing the values in column X that you're interested in.
Note that there are some limitations to what the table feature is good for, so, as always, whether this is a good solution for you depends on what you want to do with the data.
I am trying to achieve the following in Google Spreadsheets.
First, I want to query several ranges (in different sheets from the same spreadsheet). I tried a formula like this =query(arrayformula({indirect(E2:E10)}),"select * where Col1 <>''") with no success
In E2:E10 I have a list of ranges. Column F contains a name that describes the source of the value in Column E.
My second problem is that I need to add a column to the output of that query that tells me the origin of each row.
If the sources are ranges of 3 columns by country I need to merge those tables and add that country to each row.
All credits to +Ben Liebrand who helped me out here: https://support.google.com/docs/profile/3464
"I just want to start of by saying that the indirect() function does not work in an arrayformula() function as expected. So you will need to take another approach. I can understand what you are trying to do so I added another TAB in your spreadsheet to demonstrate another approach. I know it was initially a specific design you were trying so I made some changes to what you had. Maybe you can take a look at what I have offered and maybe you can tweak your design.
I know what I am offering is just very rough but you will also notice that I removed the end row specifier from your ranges in the range table.
Don't assume my example to be the final result but I was just trying to show that the range you were trying to use with the indirect() function will not work.
So hopefully this will give you a new idea of how you can maybe handle this.
My formula also adds the country to each of the tables in the output. My formula looks like this
=query(ArrayFormula({
if(len(indirect(regexextract(F2,"\w+\!\w+")&":A")),G2,),indirect(F2);
if(len(indirect(regexextract(F3,"\w+\!\w+")&":A")),G3,),indirect(F3);
if(len(indirect(regexextract(F4,"\w+\!\w+")&":A")),G4,),indirect(F4);
if(len(indirect(regexextract(F5,"\w+\!\w+")&":A")),G5,),indirect(F5);
if(len(indirect(regexextract(F6,"\w+\!\w+")&":A")),G6,),indirect(F6);
if(len(indirect(regexextract(F7,"\w+\!\w+")&":A")),G7,),indirect(F7)
})," select * where Col1 <> '' ")
Hope this is of some help to you"
And I hope is useful to the community
Gerónimo
I have a very large array of data with many columns that display different outputs for the values presented. I would like to add a row above the data that will display the most common occurring value or word below.
Generally I would like to have each top of the column (right under the column label in row 1) have the most common value below. I will then use this value for various data analysis functions!
Is this possible, and if so, how? Preferably this will not require VBA, but simply a short code in the cell.
One caveat: The exact values may vary, so there is no set list where I can say "it will be one of these."
Any ideas appreciated!
Try a series of =COUNTIF(A:A,"VALUE TO SEARCH") functions if you want to stay away from VBA.
Otherwise, the best method would be to iterate through each column via VBA. With this method, you can even count the "varying" values and return the count and/or the value itself.
http://www.excel-easy.com/examples/most-frequently-occurring-word.html
This is a single formula you would write at the top of each column. Does not require VBA. You can replace the set range to an entire column, such as (A:A) instead of (A1:A7).
If you mean an array as in a data type, it could work differently but it depends what you're trying to do.
With data from A3 through A16, in A2 enter:
=INDEX($A$3:$A$16,MODE(MATCH($A$3:$A$16,$A$3:$A$16,0)))
This will work for text as well as numbers. Adjust this to match the column size.
I have a Worksheet with 10 columns and data range from A1:J55. Col A has the invoice # and rest of the columns have other demographic data. Goal is to type the invoice number on a cell and display all the rows matching the invoice number from col A.
Besides auto filter function, the only thing comes to my mind is VBA. Please advice what is the best way to get the data. Thanks for your help in advance.
Alright, I'm pretty proud of this one. Again avoiding VBA, this one uses the volatile formula OFFSET to keep moving its VLOOKUP search down the table until it's found all matches. Just make sure you paste enough rows of the formula that if there are many matches, there's room for all of them to appear. If you put a border around your match area then it would be clear if you ever ran out of room and needed to copy down the formula some more.
Again, in the main section, it's just a single formula (using index):
=IFERROR(INDEX($A$1:$J$200,$M3,MATCH(N$2,$A$1:$J$1,0)),"")
This gets to be so simple because the hard work of the lookup is done by an initial column which looks up the next row that matches the invoice number. It has the formula:
=IFERROR(MATCH($L$2,OFFSET($A$1:$A$200,M2,0),0)+M2," ")
Here is the working example that goes with those formulas:
Let me know if you need any further description of how it works, but it mostly uses the same rules as above so that it's robust in copying and moving around.
I've uploaded the Excel file so you can play with it, but everything you need to reproduce this feature should be in this solution.
Google Docs - Click link and hit Ctrl+S to download and open in Excel.
A popular solution to this problem is a simple VLookup. Lookup the invoice the user types in on the table A1:J55, and then return an adjascent column's data.
Here's an example of it working:
The formula in the highlighted cell is:
=VLOOKUP($L3,$A:$J,MATCH(N$2,$1:$1,0),FALSE)
What's nice about this formula is you only need to type it once and then you can copy it across and it'll automatically pick out the correct column of the table (that's the match part). The rest is very simple:
The first part says lookup value $L3 (the invoice number typed in),
The second part says look it up in range $A:$J (which is where your table is located). I've shown how you can select the entire columns $A:$J so that you can add and remove data without worrying about adjustin the range in your lookups. (Excel takes care of optimizing the formula so that unused cells aren't checked)
The third part picks the column from which the resulting data will be drawn once a matching row is found.
The FALSE part is an indication that the invoice number must match exactly (no approximate matching allowed)
The $ signs ensure that fixed ranges like the location of your source table ($A:$J) and your lookup value ($L3) don't get automatically changed as you copy the formula across for multiple columns.
The formula is pretty easy to adapt if you want to move around your table and the area where you do your lookup. Here's an example:
Bonus
If you want to add a little spiff, you can add a dropdown to the Invoice # field so that the user gets auto-completion and the option to browse existing values like so: