I am using the below code to maximize the browser window.
obj = Win32API.new("user32.dll", "FindWindow", ['P','P'], 'i')
hwnd = obj.call(classname, winname)
wndConsole = Win32API.new( "user32.dll" , "ShowWindow" , ['i' , 'i'] , 'i' )
result = wndConsole.call( hwnd , 3 )
They work fine if I launch bamboo through command line.
But they doesn't work if I launch bamboo through the service.
This may or may not be what i ran into, but if Bamboo is running as a service in which you've given it GUI access, then the maximum resolution available is 800x600.
Related
When using IBM PCF Messages to monitor a queue, getting values of Input Count (MQIA_OPEN_INPUT_COUNT), it works perfectly for MQ Servers installed in Windows environment, but not for Linux. Not sure if it is a code or environment issue.
If we connect to a Windows service and perform que query there are more parameters in the response if compared to the Linux.
Same code, different results. Not sure if it is a configuration on the Channel, permissions or any other environment issue. On both MQ Servers the queues are local.
I've tried using IBM.WMQ.MQC.MQCMD_INQUIRE_Q_STATUS, with no success. Didn't find any workaround to get MQIA_OPEN_INPUT_COUNT.
PCFMessages documentation is very limited, so I didn't find anything related to this problem at MQIA_OPEN_INPUT_COUNT documentation:
https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_7.5.0/com.ibm.mq.ref.adm.doc/q087810_.htm
Any idea of how to solve this?
Public Function GetQtyQConnections(ByVal MQQueueName As String) As Integer
Dim queueManager As IBM.WMQ.MQQueueManager = Nothing
queueManager = New IBM.WMQ.MQQueueManager(AppSettings("MQQueueManagerName"), AppSettings("MQChannelName"), AppSettings("MQConnectionName"))
Dim oPCFMessageAgent As IBM.WMQ.PCF.PCFMessageAgent = New IBM.WMQ.PCF.PCFMessageAgent
oPCFMessageAgent.Connect(queueManager)
Dim pcfMsg As IBM.WMQ.PCF.PCFMessage = New IBM.WMQ.PCF.PCFMessage(IBM.WMQ.MQC.MQCMD_INQUIRE_Q)
pcfMsg.AddParameter(IBM.WMQ.MQC.MQCA_Q_NAME, MQQueueName)
Dim pcfResponse() As IBM.WMQ.PCF.PCFMessage = oPCFMessageAgent.Send(pcfMsg)
Dim pcfResponseLen As Integer = pcfResponse.Length
Dim inputcount As Integer = -1
For i As Integer = 0 To pcfResponseLen - 1
Dim oParams() As IBM.WMQ.PCF.PCFParameter = pcfResponse(i).GetParameters
For Each oParam As IBM.WMQ.PCF.PCFParameter In oParams
Select Case oParam.Parameter
Case IBM.WMQ.MQC.MQIA_OPEN_INPUT_COUNT
inputcount = Integer.Parse(oParam.GetValue())
End Select
Next
Next
Return inputcount
End Function
On Windows:
---------------
2016-QUEUENAME
20-1
134--3
2027-2018-03-12
2028-13.59.40
2019-
22-0
2030-
2029-
2124-
96-0
95-0
98--3
2004-2018-03-12
2005-13.59.40
3-0
2119-
61-0
6-0
5-1
184-1
188-0
4-2
7-1
2013-
34-0
9-0
8-1
272-2
2008-
17-0
15-5000
13-104857600
123--3
16-0
24-0
78-0
18-0
2012-
10-0
190-0
40-80
41-20
43-0
44-0
42-1
46-0
54-999999999
21-999999999
45-1
23-1
128--3
2023-
29-1
26-0
28-1
12-0
On Linux:
---------------
2016-QUEUENAME
20-6
2027-2019-03-11
2028-17.38.24
2030-
2029-
96-0
95-0
2119-
61-1
6-0
5-1
184-1
2013-QUEUEDESCRIPTION
10-0
2017-QUEUEMANAGER
2018-QUEUENAME
45-1
2024-QUEUEMANAGER
From your output I can see that the queue you have looked at on Windows is a local queue. The second parameter you display (20) is MQIA_Q_TYPE and it has a value of (1) MQQT_LOCAL.
The queue you have looked at on Linux however is a remote queue. It's MQIA_Q_TYPE (20) parameter has a value of (6) MQQT_REMOTE.
There are many differences between local queues and remote queues, and their attributes are quite different. Try using runmqsc and display a few local and remote queues to understand the differences. These differences have not occurred because of the different platform, just because of the different queue type.
You say in your question that on both MQ Servers the queues are local, but I'm afraid that is not what your output is showing.
Also, if you want to use the Inquire Queue command, please be sure you know that OpenInputCount and OpenOutputCount are only shown for local queues, not remote queues.
If your Linux and Windows releases of IBM MQ are at the same version level then you should get the same response parameters returned.
Why don't you format your output so that it is readable to the average human? Nobody will know what you mean by 2016, 2028, etc. (except for me and a few others)
Issues:
You did not specify the "Status Type" for the request. i.e. QUEUE vs HANDLE
You did not specify any attributes for the request.
Have a look at MQListQueueStatus01.java code I posted here: IBM MQ fetch LGETTIME using Java
Finally, why don't you use C# rather than VB? You could simply use all of the Java/MQ/PCF code that I post since C# is a clone of Java (so to speak).
Basically I am trying to make two tools activate the same function except one tool makes the function update one leader stat while the other tool makes the funtion update a different leader stat
local remote = game.ReplicatedStorage.Give
remote.OnServerEvent:Connect(function(Player)
local plr = Player
if Activated by Starterpack.Child.Cloud then
plr.leaderstats.JumpBoost.Value = plr.leaderstats.JumpBoost.Value +10
or if Activated by Starterpack.Child.Speed then
plr.leaderstats.Speed.Value = plr.Leaderstats.Speed.Value +10
end
end)
I expected it to allow one tool to activate the same function as the other tool but change a different leader stat
RemoteEvent.FireServer let you pass any number of args when you invoke it. Have your tools each supply a different identifier, and then you can key off the identifier in RemoteEvent.OnServerEvent.
LocalScript inside Tool 1 - Cloud
local remoteGive = game.ReplicatedStorage.Give
local tool = script.Parent
tool.Equipped:Connect(function()
remoteGive:FireServer("Cloud")
end
LocalScript inside Tool 2 - Speed
local remote = game.ReplicatedStorage.Give
local tool = script.Parent
tool.Equipped:Connect(function()
remote:FireServer("Speed")
end)
Server Script
local remote = game.ReplicatedStorage.Give
remote.OnServerEvent:Connect(function(Player, toolId)
if toolId == "Cloud" then
Player.leaderstats.JumpBoost.Value = Player.leaderstats.JumpBoost.Value + 10
elseif toolId == "Speed" then
Player.leaderstats.Speed.Value = Player.Leaderstats.Speed.Value + 10
end
end)
I m working on script which will let me know running status (running/stopped) of desired application on remote desktop (windows server)
my code is doing fine until I have logged in on remote desktop (using "Remote Desktop Connection").. if I close it without logging off.. it continue work fine.. but as I log off from there .. it just stop working .. here one thing I note.. even after logging off when I run command on ssh client... it gives some successful acknowledgement
I do get desired output when remote desktop connection for that server is on from any other computer in network
ALL FOWWLOWING CODE AND OUTPUT IS WHEN I LOG OFF FROM REMOTE DESKTOP CONNECTION
string runCommand = "wmic process call create "TestClient.exe";
SshCommand command = ssh.RunCommand(runCommand);
string myData = command.Result;
after this myData will have
Executing (Win32_Process)->Create()
Method execution successful.
Out Parameters:
instance of __PARAMETERS
{
ProcessId = [some pid in numeric]; //when I be logged off, this field would not be there.. (case of problem)
ReturnValue = [some numeric];
};
but after doing this when I check status of test client by following code..
string rumCommand = "wmic process where "TestClient.exe" get ProcessID, ExecutablePath";
SshCommand command = ssh.RunCommand(rumCommand);
string myData = command.Result;
but there will not any running app listed in myData !!!
Connecting ssh client as per follow..
string pass = "password";
PasswordAuthenticationMethod PasswordConnection = new PasswordAuthenticationMethod("user_name", pass);
KeyboardInteractiveAuthenticationMethod KeyboardInteractive = new KeyboardInteractiveAuthenticationMethod("user_name");
ConnectionInfo connectionInfo = new ConnectionInfo(serverIP, port, "user_name", PasswordConnection, KeyboardInteractive);
SshClient ssh = new SshClient(connectionInfo);
if (!ssh.IsConnected)
ssh.Connect();
yeh, It was very simple problem to solve, but was in corner as well. As I had made test client (which I was testing whether they r running or not) running through task scheduler and forgot to tick on checkbox which suggest that it will be running even after Logoff.. checking this checkbox.. All Fine
My application deletes virtual printer when user uninstalls the application.
Application's installation and Uninstallation can be done using user interaction(wizard) or by setting group policy in Windows server 2003(domain admin sets the policy in server and the domain user in client PC need to update the group policy and restart the Client PC for installation or uninstallation of the application).
The follwing code in the application deletes printer and printer driver when uninstalling the application.
void CPrinterDriver::DeletePrinterIfExists()
{
// Delete old printer driver if existing
ControlSpoolService(TRUE);
HANDLE hPrinter = NULL;
PRINTER_DEFAULTS pDefaults = { NULL, NULL, PRINTER_ALL_ACCESS };
// Ignore error codes
OpenPrinter(m_driverInfo.pName, &hPrinter, &pDefaults);
if (hPrinter)
{
// deleting jobs
SetPrinter(hPrinter, 0, NULL, PRINTER_CONTROL_PURGE);
// Delete printer
DeletePrinter(hPrinter);
// Get printer driver name and delete it
DWORD dwNeeded = 0;
GetPrinter(hPrinter, 2, NULL, 0, &dwNeeded);
if (dwNeeded)
{
PRINTER_INFO_2 *pi2 = (PRINTER_INFO_2 *)GlobalAlloc(GPTR, sizeof(PRINTER_INFO_2)*dwNeeded);
if (pi2)
{
GetPrinter(hPrinter, 2, (LPBYTE)pi2, dwNeeded, &dwNeeded);
DeletePrinterDriver(NULL, NULL, pi2->pDriverName);
GlobalFree(pi2);
}
}
ClosePrinter(hPrinter);
}
}
The above code works well in Windows 7 in both cases(user interactive installation and using group policy) of uninstallation. In Windows 8, it works well using user interactive installation and uninstallation.
But in Windows 8 the above OpenPrinter() is returing ERROR_INVALID_PRINTER_NAME.
We found that the OpenPrinter() is called using the "SYSTEM" account.
Kindly help.
We found that during system startup, group policy is trying to uninstall the printer before the available printers list in the PC is populated (list is populated under the below registry key.If the list is not populated the below key does not exists).
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers"
Hence we added delay of 2 minutes(not less than 2 mins) before calling openPrinter().
After the delay the registry key exists and the OpenPrinter() succeeded.
Thus we are able to uninstall the printer.
Note: Microsoft claims that Windows 8 boot time is reduced to 7 secs for certain supported hardware. But inserting delay of 2 mins degrades the boot performance of the Windows 8 PC.
For more details regarding the improvement in the boot time of Windwos 8 OS please refer the below link.
http://blogs.msdn.com/b/b8/archive/2012/05/22/designing-for-pcs-that-boot-faster-than-ever-before.aspx
Hence delay of 2 mins can be terated as a workaround.
Need to check the behaviour in the Windows 8 OS release after 10/26.
If you suffer from the issue where:
the registry key for the shared (network) printer is missing and
the API gives you the invalid printer name error
Then you can try opening the printer by its full UNC path.
So when opening MYPRINTER does not work, then open it as \\MYSERVER\MYPRINTER .
Of course this still assumes that you can already print to this printer normally from other applications!
I'm trying to use the asadmin interface to monitor a thread-pool on GlassFish 3.1.1. I'm executing the following command:
asadmin get -m server.network.my-listener.thread-pool.*
and I'm getting data back, but most of it has lastsampletime = -1 (so the related data is zero; and is worthless).
Note: I've also tried the REST interface, which I believe asadmin delegates to, and the JMX interface. Same problem: much of the data has lastsampletime = -1.
I've already turned monitoring to HIGH for all modules. What am I missing?
It seems like redeploying my application was necessary for the monitoring to actually get values. Perhaps I interpreted the manual incorrectly but it seems to suggest that a restart/redeploy wouldn't be required:
Oracle GlassFish Server 3.1 Administration Guide
Also, it is weird that the following shows there is no monitoring data:
asadmin get -m server.thread-pools.thread-pool.http-thread-pool.*
Instead you must go through a specific network listener like:
asadmin get -m server.network.http-listener-2.thread-pool.*
It also took me by surprise that enabling thread-pool monitoring IS NOT enough to see thread pool statistics. You must also enable http-service monitoring:
asadmin enable-monitoring
asadmin set server.monitoring-service.module-monitoring-levels.thread-pool=HIGH
asadmin set server.monitoring-service.module-monitoring-levels.http-service=HIGH
That's all you should need to do.
Enable monitoring, set to HIGH, for the http-service module on the DAS, stand-alone instance, or cluster you want to monitor.
Deploy an app to the DAS, stand-alone instance, or cluster and make http-requests.
asadmin get -m *instancename*.network.*listener*.thread-pool.*
Looks like you are monitoring DAS, since you are using asadmin get -m server.network.my-listener.thread-pool.*.
I deployed a simple war to DAS and made a bunch of http requests. I see the corethreads-count and maxthreads-count have last sample time as -1. And the remaining statistics have actual last sample times.
asadmin get -m "server.network.http-listener-1.thread-pool.*"
server.network.http-listener-1.thread-pool.corethreads-count = 0
server.network.http-listener-1.thread-pool.corethreads-description = Core number of threads in the thread pool
server.network.http-listener-1.thread-pool.corethreads-lastsampletime = -1
server.network.http-listener-1.thread-pool.corethreads-name = CoreThreads
server.network.http-listener-1.thread-pool.corethreads-starttime = 1320764890444
server.network.http-listener-1.thread-pool.corethreads-unit = count
server.network.http-listener-1.thread-pool.currentthreadcount-count = 5
server.network.http-listener-1.thread-pool.currentthreadcount-description = Provides the number of request processing threads currently in the listener thread pool
server.network.http-listener-1.thread-pool.currentthreadcount-lastsampletime = 1320765351708
server.network.http-listener-1.thread-pool.currentthreadcount-name = CurrentThreadCount
server.network.http-listener-1.thread-pool.currentthreadcount-starttime = 1320764890445
server.network.http-listener-1.thread-pool.currentthreadcount-unit = count
server.network.http-listener-1.thread-pool.currentthreadsbusy-count = 0
server.network.http-listener-1.thread-pool.currentthreadsbusy-description = Provides the number of request processing threads currently in use in the listener thread pool serving requests
server.network.http-listener-1.thread-pool.currentthreadsbusy-lastsampletime = 1320765772814
server.network.http-listener-1.thread-pool.currentthreadsbusy-name = CurrentThreadsBusy
server.network.http-listener-1.thread-pool.currentthreadsbusy-starttime = 1320764890445
server.network.http-listener-1.thread-pool.currentthreadsbusy-unit = count
server.network.http-listener-1.thread-pool.dotted-name = server.network.http-listener-1.thread-pool
server.network.http-listener-1.thread-pool.maxthreads-count = 0
server.network.http-listener-1.thread-pool.maxthreads-description = Maximum number of threads allowed in the thread pool
server.network.http-listener-1.thread-pool.maxthreads-lastsampletime = -1
server.network.http-listener-1.thread-pool.maxthreads-name = MaxThreads
server.network.http-listener-1.thread-pool.maxthreads-starttime = 1320764890443
server.network.http-listener-1.thread-pool.maxthreads-unit = count
server.network.http-listener-1.thread-pool.totalexecutedtasks-count = 31
server.network.http-listener-1.thread-pool.totalexecutedtasks-description = Provides the total number of tasks, which were executed by the thread pool
server.network.http-listener-1.thread-pool.totalexecutedtasks-lastsampletime = 1320765772814
server.network.http-listener-1.thread-pool.totalexecutedtasks-name = TotalExecutedTasksCount
server.network.http-listener-1.thread-pool.totalexecutedtasks-starttime = 1320764890444
server.network.http-listener-1.thread-pool.totalexecutedtasks-unit = count
Command get executed successfully.
To instantly enable monitoring without restart use enable-monitoring command
enable-monitoring
enable-monitoring --modules jvm=LOW
enable-monitoring --modules thread-pool=HIGH
enable-monitoring --modules http-service=HIGH
enable-monitoring --modules jdbc-connection-pool=HIGH
The trick is that thread-pool and http-service modules must have high level to get monitoring info.
For more info refer https://docs.oracle.com/cd/E26576_01/doc.312/e24928/monitoring.htm#GSADG00558