Consider the following:
SET(TEST_DIR, "test")
INSTALL(PROGRAMS scripts/foo.py DESTINATION ${TEST_DIR})
INSTALL(PROGRAMS scripts/foo.py DESTINATION #TEST_DIR#)
The first INSTALL command does not work. The second does. Why is that? What is the difference between those two? I have not found any reference to ## expansion except in the context of creation of configuration files. Everything else only uses ${} expansion.
UPDATE: OK, obvious bug in the above. My SET() command has an extraneous comma. Removing it, such that it looks like:
SET(TEST_DIR "test")
results in both ## and ${} expansions working. Still wondering (a) what is the meaning of ## as opposed to ${}, and why only the former worked with my incorrect SET() statement.
According to the documentation for the configure_file() command when configuring a file both the ${VAR} form and #VAR# form will be replaced VAR's value. Based on your experience above and some testing I did both forms are replaced when CMake evaluates your CMakeLists.txt, too. Since this is not documented I would recommend against using the #VAR# from in your CMakeLists.txt
Note that when using configure_file() you can restrict replacement to only the #VAR# form by using the #ONLY argument.
As far as I know, the #VAR# syntax is only used when replacing variables with the configure_file command.
Note that the configure_file command allows for an extra option #ONLY. Using it you can specify that only the #VAR#'s are replaced, but that the ${VAR}'s are kept.
As an example, this can be useful when generating e.g. a cmake-file which is later to be used with CMake again. E.g. when building your project, the #VAR# will be replaced when using configure_file. After you distributed your project and someone else uses the generated UseProject.cmake file, the ${VAR}$ entries will be replaced.
Related
I need to use a property from an external project. So far I'm successfully doing that this way:
ExternalProject_Add(
some_ep_name
...
)
# Get source dir
ExternalProject_Get_Property(some_ep_name SOURCE_DIR)
# Set source dir value into less generically named variable
set(SOME_EP_NAME_SOURCE_DIR "${SOURCE_DIR}")
This works, but it seems unnecessarily verbose, and it annoys me a little. I was hoping I could use a generator expression, like so:
"$<TARGET_PROPERTY:some_ep_name,SOURCE_DIR>"
But it seems like this doesn't work. Before I give up, I wanted to check if I was doing something wrong or if anyone knows a better way.
All "properties" of ExternalProject are known at configuration time. So they don't require support of generator expressions, which main intention is usage for values not known at configuration time (but known at build time).
If you found "unnecessarily verbose" having several lines of code for save external project' property into the variable, you may create a macro/function for incorporate all these lines. Then calling the macro/function will use only single line of code:
function(ExternalProject_Property_to_Var VAR eproject prop)
ExternalProject_Get_Property(${eproject} ${eprop})
set(${VAR} ${${eprop}} PARENT_SCOPE)
endfunction()
...
ExternalProject_Property_to_Var(SOME_EP_NAME_SOURCE_DIR some_ep_name SOURCE_DIR)
I have a CMake project which lets a globally set variable (set with -DARDUINO_SDK_PATH=/a/b/c on command line) disappear i.e. suddenly the given value is gone which leads to a fatal error.
I know there are different ways to "hide" a variable (e.g. inside functions or external projects)
In my case:
the variable is not being set explicitly anywhere in the code (e.g. via set() or find_path())
the access which leads to the error is on top level (i.e. not inside a function)
there are instructions (i.e. same file/line) where in one case the variable has the value it's been given and the next time it's gone
Tracing the variable with variable_watch(ARDUINO_SDK_PATH) I can see that everything works fine before the compiler is being checked:
cmake -DARDUINO_SDK_PATH=/a/b/c <path>
...
... everything fine, ${DARDUINO_SDK_PATH} == '/a/b/c' everywhere
...
-- Check for working C compiler: /usr/bin/avr-gcc
...
... here the variable is empty and not being traced any more
...
Here is my suggestion:
Does the compiler check (indicated by check for working C compiler .. on the terminal) have it's own variable space and does not know variables provided on command line?
Note: This question is a generalization of this question, which has become way too specialized but might offer some useful background information.
That any modification to variable is not traced after the variable_watch() command seems like a bug somewhere in CMake to me.
Generally speaking a "cached CMake variable" can be hidden by a "normal CMake variable" with the same name. But e.g. find_path() won't run again or modify a variable if already set.
Here is an example:
cmake_minimum_required(VERSION 2.4)
project(VariableWatchTest NONE)
variable_watch(MY_TEST_VAR)
set(MY_TEST_VAR "something" CACHE INTERNAL "")
message("${MY_TEST_VAR}")
set(MY_TEST_VAR "hiding something")
message("${MY_TEST_VAR}")
unset(MY_TEST_VAR)
message("${MY_TEST_VAR}")
find_path(MY_TEST_VAR NAMES "CMakeLists.txt" HINTS "${CMAKE_CURRENT_LIST_DIR}")
message("${MY_TEST_VAR}")
Would give (without the variable_watch() messages:
-- something
-- hiding something
-- something
-- something
References
What's the CMake syntax to set and use variables?
I'm not sure whether this is a bug or a feature but (at least some) CMake variables are not available in certain steps of the CMake configuration procedure.
You can check this by adding something like this to your toolchain file:
MESSAGE("FOO: ${FOO}")
and run CMake like this
cd build-dir
cmake -DFOO=TEST ..
You will likely see FOO printed with value TEST once in the beginning of the configuration process and later printed again but being empty.
Just don't access variables from the global space inside a toolchain file (doesn't belong there anyway).
I'm asking this as a reminder to myself the next time I use CMake. It never sticks, and Google results aren't great.
What's the syntax to set and use variables in CMake?
When writing CMake scripts there is a lot you need to know about the syntax and how to use variables in CMake.
The Syntax
Strings using set():
set(MyString "Some Text")
set(MyStringWithVar "Some other Text: ${MyString}")
set(MyStringWithQuot "Some quote: \"${MyStringWithVar}\"")
Or with string():
string(APPEND MyStringWithContent " ${MyString}")
Lists using set():
set(MyList "a" "b" "c")
set(MyList ${MyList} "d")
Or better with list():
list(APPEND MyList "a" "b" "c")
list(APPEND MyList "d")
Lists of File Names:
set(MySourcesList "File.name" "File with Space.name")
list(APPEND MySourcesList "File.name" "File with Space.name")
add_excutable(MyExeTarget ${MySourcesList})
The Documentation
CMake/Language Syntax
CMake: Variables Lists Strings
CMake: Useful Variables
CMake set() Command
CMake string()Command
CMake list() Command
Cmake: Generator Expressions
The Scope or "What value does my variable have?"
First there are the "Normal Variables" and things you need to know about their scope:
Normal variables are visible to the CMakeLists.txt they are set in and everything called from there (add_subdirectory(), include(), macro() and function()).
The add_subdirectory() and function() commands are special, because they open-up their own scope.
Meaning variables set(...) there are only visible there and they make a copy of all normal variables of the scope level they are called from (called parent scope).
So if you are in a sub-directory or a function you can modify an already existing variable in the parent scope with set(... PARENT_SCOPE)
You can make use of this e.g. in functions by passing the variable name as a function parameter. An example would be function(xyz _resultVar) is setting set(${_resultVar} 1 PARENT_SCOPE)
On the other hand everything you set in include() or macro() scripts will modify variables directly in the scope of where they are called from.
Second there is the "Global Variables Cache". Things you need to know about the Cache:
If no normal variable with the given name is defined in the current scope, CMake will look for a matching Cache entry.
Cache values are stored in the CMakeCache.txt file in your binary output directory.
The values in the Cache can be modified in CMake's GUI application before they are generated. Therefore they - in comparison to normal variables - have a type and a docstring. I normally don't use the GUI so I use set(... CACHE INTERNAL "") to set my global and persistant values.
Please note that the INTERNAL cache variable type does imply FORCE
In a CMake script you can only change existing Cache entries if you use the set(... CACHE ... FORCE) syntax. This behavior is made use of e.g. by CMake itself, because it normally does not force Cache entries itself and therefore you can pre-define it with another value.
You can use the command line to set entries in the Cache with the syntax cmake -D var:type=value, just cmake -D var=value or with cmake -C CMakeInitialCache.cmake.
You can unset entries in the Cache with unset(... CACHE).
The Cache is global and you can set them virtually anywhere in your CMake scripts. But I would recommend you think twice about where to use Cache variables (they are global and they are persistant). I normally prefer the set_property(GLOBAL PROPERTY ...) and set_property(GLOBAL APPEND PROPERTY ...) syntax to define my own non-persistant global variables.
Variable Pitfalls and "How to debug variable changes?"
To avoid pitfalls you should know the following about variables:
Local variables do hide cached variables if both have the same name
The find_... commands - if successful - do write their results as cached variables "so that no call will search again"
Lists in CMake are just strings with semicolons delimiters and therefore the quotation-marks are important
set(MyVar a b c) is "a;b;c" and set(MyVar "a b c") is "a b c"
The recommendation is that you always use quotation marks with the one exception when you want to give a list as list
Generally prefer the list() command for handling lists
The whole scope issue described above. Especially it's recommended to use functions() instead of macros() because you don't want your local variables to show up in the parent scope.
A lot of variables used by CMake are set with the project() and enable_language() calls. So it could get important to set some variables before those commands are used.
Environment variables may differ from where CMake generated the make environment and when the the make files are put to use.
A change in an environment variable does not re-trigger the generation process.
Especially a generated IDE environment may differ from your command line, so it's recommended to transfer your environment variables into something that is cached.
Sometimes only debugging variables helps. The following may help you:
Simply use old printf debugging style by using the message() command. There also some ready to use modules shipped with CMake itself: CMakePrintHelpers.cmake, CMakePrintSystemInformation.cmake
Look into CMakeCache.txt file in your binary output directory. This file is even generated if the actual generation of your make environment fails.
Use variable_watch() to see where your variables are read/written/removed.
Look into the directory properties CACHE_VARIABLES and VARIABLES
Call cmake --trace ... to see the CMake's complete parsing process. That's sort of the last reserve, because it generates a lot of output.
Special Syntax
Environment Variables
You can can read $ENV{...} and write set(ENV{...} ...) environment variables
Generator Expressions
Generator expressions $<...> are only evaluated when CMake's generator writes the make environment (it comparison to normal variables that are replaced "in-place" by the parser)
Very handy e.g. in compiler/linker command lines and in multi-configuration environments
References
With ${${...}} you can give variable names in a variable and reference its content.
Often used when giving a variable name as function/macro parameter.
Constant Values (see if() command)
With if(MyVariable) you can directly check a variable for true/false (no need here for the enclosing ${...})
True if the constant is 1, ON, YES, TRUE, Y, or a non-zero number.
False if the constant is 0, OFF, NO, FALSE, N, IGNORE, NOTFOUND, the empty string, or ends in the suffix -NOTFOUND.
This syntax is often use for something like if(MSVC), but it can be confusing for someone who does not know this syntax shortcut.
Recursive substitutions
You can construct variable names using variables. After CMake has substituted the variables, it will check again if the result is a variable itself. This is very powerful feature used in CMake itself e.g. as sort of a template set(CMAKE_${lang}_COMPILER ...)
But be aware this can give you a headache in if() commands. Here is an example where CMAKE_CXX_COMPILER_ID is "MSVC" and MSVC is "1":
if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC") is true, because it evaluates to if("1" STREQUAL "1")
if(CMAKE_CXX_COMPILER_ID STREQUAL "MSVC") is false, because it evaluates to if("MSVC" STREQUAL "1")
So the best solution here would be - see above - to directly check for if(MSVC)
The good news is that this was fixed in CMake 3.1 with the introduction of policy CMP0054. I would recommend to always set cmake_policy(SET CMP0054 NEW) to "only interpret if() arguments as variables or keywords when unquoted."
The option() command
Mainly just cached strings that only can be ON or OFF and they allow some special handling like e.g. dependencies
But be aware, don't mistake the option with the set command. The value given to option is really only the "initial value" (transferred once to the cache during the first configuration step) and is afterwards meant to be changed by the user through CMake's GUI.
References
How is CMake used?
cmake, lost in the concept of global variables (and PARENT_SCOPE or add_subdirectory alternatives)
Looping over a string list
How to store CMake build settings
CMake compare to empty string with STREQUAL failed
When should I quote CMake variables?
Here are a couple basic examples to get started quick and dirty.
One item variable
Set variable:
SET(INSTALL_ETC_DIR "etc")
Use variable:
SET(INSTALL_ETC_CROND_DIR "${INSTALL_ETC_DIR}/cron.d")
Multi-item variable (ie. list)
Set variable:
SET(PROGRAM_SRCS
program.c
program_utils.c
a_lib.c
b_lib.c
config.c
)
Use variable:
add_executable(program "${PROGRAM_SRCS}")
CMake docs on variables
$ENV{FOO} for usage, where FOO is being picked up from the environment variable. otherwise use as ${FOO}, where FOO is some other variable. For setting, SET(FOO "foo") would be used in CMake.
I have a program on my computer, let's say C:/Tools/generate_v23_debug.exe
I have a FindGenerate.cmake file which allows CMake to find that exact path to the executable.
So in my CMake code, I do:
find_program(Generate)
if (NOT Generate_FOUND)
message(FATAL_ERROR "Generator not found!")
So CMake has found the executable. Now I want to call this program in a custom command statement. Should I use COMMAND Generator or COMMAND ${GENERATOR_EXECUTABLE}? Will both of these do the same thing? Is one preferred over the other? Is name_EXECUTABLE a variable that CMake will define (it's not in the FindGenerate.cmake file), or is it something specific to someone else's example code I'm looking at? Will COMMAND Generator be expanded to the correct path?
add_custom_command(
OUTPUT blahblah.txt
COMMAND Generator inputfile1.log
DEPENDS Generator
)
find_program stores its result into the variable given as a first argument. You can verify this by inserting some debug output:
find_program(GENERATOR Generate)
message(${GENERATOR})
Note that find_program does not set any additional variables beyond that. In particular, you mentioned Generate_FOUND and GENERATOR_EXECUTABLE in your question and neither of those gets introduced implicitly by the find_program call.
The second mistake in your program is the use of the DEPENDS option on the add_custom_command. DEPENDS is used to model inter-target dependencies at build time and not to manipulate control flow in the CMakeLists. For example, additional custom command can DEPEND on the output of your command (blahblah.txt), but a custom command cannot DEPEND on the result of a previous find operation.
A working example might look something like this:
find_program(GENERATOR Generate)
if(NOT GENERATOR)
message(FATAL_ERROR "Generator not found!")
endif()
add_custom_command(
OUTPUT blahblah.txt
COMMAND ${GENERATOR} inputfile1.log
)
P.S.: You asked why the code examples were not properly formatted in your question. You indented everything correctly, but you need an additional newline between normal text and code paragraphs. I edited your question accordingly.
I feel a little stupid right now. After recently converting a few smaller projects to use CMake, I decided to also get rid of a few "Platform_Config.h" files. These files contain a few preprocessing directives like #define USE_NEW_CACHE and control compilation.
How would I 'convert' these defines to be controlled with CMake? Ideally by using these "cache" variables the user can easily edit.
There are two options. You can use the add_definitions method to pass defines as compiler flags: E.g. somewhere in your projects cmakelists.txt:
add_definitions( -DUSE_NEW_CACHE )
CMake will make sure the -D prefix is converted to the right flag for your compiler (/D for msvc and -D for gcc).
Alternatively, check out configure_file. It is more complex, but may be better suited to your original approach with a Platform_Config file.
You can create an input-file, similar to your original Platform_Config.h and add "#cmakedefine" lines to it.
Let's call in Platform_Config.h.in:
// In Platform_Config.h.in
#cmakedefine USE_NEW_CACHE
// end of Platform_Config.h.in
When then running
configure_file( ${CMAKE_SOURCE_DIR}/Platform_Config.h.in ${CMAKE_BINARY_DIR}/common/Platform_Config.h )
it will generate a new Platform_Config file in your build-dir. Those variables in cmake which are also a cmakedefine will be present in the generated file, the other ones will be commented out or undefed.
Of course, you should make sure the actual, generated file is then correctly found when including it in your source files.
option command might provide what you are looking for.
use it with the COMPILE DEFINITIONS property on the target and i think you are done.
To set the property on the target, use the command set target properties
option(DEBUGPRINTS "Prints a lot of debug prints")
target(myProgram ...)
if(DEBUGPRINTS)
set_target_properties(myProgram PROPERTIES COMPILE_DEFINITIONS "DEBUGPRINTS=1")
endif()
edit:
The option i wrote in the example shows up as a checkbox in the CMake GUI.
In case you want to set defines per target: Since 2.8.11 you can use target_compile_definitions.
In earlier versions you probably don't want to use set_target_properties as is, since it overwrites any defines you set previously. Call get_target_property first instead, then merge with previous values. See add_target_definitions here.
Use target_compile_options. Do not quote your define or it not be detected as a define. CMake parses off the /define and adds the actual define to the DefineConstants section of the csproj, if there are quotes it will put the entire quoted string in the AdditionalOptions section of the csproj.
An example from one of my projects that uses generator expressions:
target_compile_options( ${LIBRARY_NAME} PRIVATE
$<${IS_ART_ITERATION_BUILD}:/define:ART_ITERATION_BUILD>
)
An example without generator expressions:
target_compile_options( ${LIBRARY_NAME} PRIVATE
/define:GRAPHICS_VULKAN
)