my problem is the following. I'm currently making a blog-page with get-page, get-resources, form-it, and wayfinder. This question requires a decent amount of knowledge about Modx and snippits. I've got the page numberin and all working and i've got a template page with all my calls in it (called weblogTemplate). This template has the following wayfinder call in it :
[[!getResources? &parents=`5` &limit=`5` &tpl=`blogPost`]]
[[!getPage?
&elementClass=`modSnippet`
&element=`getResources`
&parents=`4`
&depth=`2`
&limit=`5`
&pageNavOuterTpl=`[[+first]][[+prev]][[+pages]][[+next]][[+last]]`
&pageVarKey=`page`
&pageFirstTpl=`<li class="controlFirst"><a[[+classes]][[+title]] href="[[+href]]">Eerste pagina</a></li>`
&pageLastTpl=`<li class="controlLast"><a[[+classes]][[+title]] href="[[+href]]">Laatste pagina</a></li>`
&pagePrevTpl=`<li class="controlPrev"><a[[+classes]][[+title]] href="[[+href]]"><<</a></li>`
&pageNextTpl=`<li class="controlNext"><a[[+classes]][[+title]] href="[[+href]]">>></a></li>`
&includeTVs=`1`
&includeContent=`1`
&tpl=`blogListPost`
]]
as you can see the parent is set here to id number 5. This is fine for the homepage but any child page connected in the blog page also uses the same template and so would also have the same menu as the parent. You could use a fix to simply create 1 template for a page and keep using a different getResource call but keep in mind that it is a blog im making, new pages keep getting added. The user can't (, and wouldn't even understand to) make a template and edit any code. A solution i thought of would be to make the parent id dynamic, so it adjust to whatever page it is currently on. So for example if it was on the page with id number 12 it would make the parent call set to 12 and so show all the content under id number 12. If anyone has any ideas / thoughts / solutions i would be very grateful to hear them.
(a link about wayfinder that i used.)
The best solution would be to use two templates - one for main and one for the blog pages and use in blog templates:
&parents=`[[*id]]`
The problem with the user solveds by setting default_template in the system settings.
This worked for me:
[[!getPage?
&elementClass=`modSnippet`
&element=`getResources`
&parents=`[[*id]]`
&depth=`0`
&limit=`10`
&pageNavOuterTpl=`[[+first]][[+prev]][[+pages]][[+next]][[+last]]`
&pageVarKey=`page`
&pageFirstTpl=`<li class="controlFirst"><a[[+classes]][[+title]] href="[[+href]]">Eerste pagina</a></li>`
&pageLastTpl=`<li class="controlLast"><a[[+classes]][[+title]] href="[[+href]]">Laatste pagina</a></li>`
&pagePrevTpl=`<li class="controlPrev"><a[[+classes]][[+title]] href="[[+href]]"><<</a></li>`
&pageNextTpl=`<li class="controlNext"><a[[+classes]][[+title]] href="[[+href]]">>></a></li>`
&includeTVs=`1`
&includeContent=`1`
&tpl=`blogListPost`
]]
Thanks to Vasis for the provided help.
Related
I'm not very used to Active Reports and I got an old software using those. The software provide some kind of stripped version of Active Reports Designer 7.
I got a PageFooter section with some fields and I want to remove one to display it only when it's the last page.
Basically, what I want to do is this in scripts :
if (this.PageNumber == this.PageCount) {
Field.Visible = true;
}
I only find one post here that say this.PageNumber should work, but it dosent.
So I tried to use the ReportInfo using the FormatString as {PageNumber}, but I don't seems to be able to read the value using this.ReportInfo.Value or this.ReportInfo.Text
I also tried to make a TextBox, using SummaryType : PageCount. But I'm still unable to read the Value.
So the question is :
How can I know the Page Number and Page Count in the script section?
Or how can I read the value of those textbox I created ?
Thanks a lot!
I think these docs cover what you are looking for:
https://help.grapecity.com/activereports/webhelp/Legacy/AR7Help/OnlineEN/AddPageNumbering.html
https://help.grapecity.com/activereports/webhelp/Legacy/AR7Help/OnlineEN/index.html
I'm trying to use "videojs-thumbnails" plugin from https://github.com/brightcove/videojs-thumbnails and noticed that thumbnail's time, specified in the plugin configuration is not matching the timestamp in the seek bar. Coming across different comments regarding this issue I found suggestion at https://github.com/brightcove/videojs-thumbnails/issues/43 to replace line
mouseTime = Math.floor((left - progressControl.el().offsetLeft) / progressControl.width() * duration);
to
mouseTime = Math.floor((left) / progressControl.width() * duration);
By removing
- progressControl.el().offsetLeft
However, that produces still not exact time match.
Finally I came with redefined value for the
var left
Getting it from the current value of
.vjs-mouse-display
So, my final codes are:
left=parseInt((document.querySelector('.vjs-mouse-display').style.left),10);
mouseTime = Math.floor((left) / progressControl.width() * duration);
Now everything works correctly.
Greatly appreciate for comments/suggestions.
This is NOT an answer to your specific question / issue, but rather, an alternative implentation approach.
I, too, wanted thumbnails for my video(s), so I proto-typed a page
that used videoJS's plugin. I don't recall all the details of the
issues that I ran into trying to use that plugin, but I finally decided
to abandon the plugin, and design an alternative, which has its own
separate 'slider' just above the viewer. [ One 'drags' my slider,
(rather than hover along it, as you do on YouTube's videos), so that it
can work straight-forwardly on touch-screens...i.e. on Android, etc. ]
And, rather than try to extract images from the video in real-time,
(See: How to generate video preview thumbnails for use in VideoJS? ), I chose to prepare the images, ahead of time, using 'ffmpeg' and the cmd-line interface to 'ImageMagick'.
Details of that part are here:
http://weasel.firmfriends.us/GeeksHomePages/subj-video-and-audio.html#implementing-video-thumbnails
My 'proof-of-concept' webpage based on that approach is here:
https://weasel.firmfriends.us/Private3-BB/
I hope this is helpful.
I went through the Merge Tags here and here, but couldn't figure out the syntax that would allow me to show content based on whether the user has certain Tag or not.
Help?
My goal in case it helps:
User subscribes, and is queued for a welcome mail one day later. In meantime that user may get tagged (my way of segmenting them), and so, the next day when that user receives the welcome mail, the content needs to be catered based on the tag that user got.
Got a response from their support saying
merge tags do not work with Tags just yet
here's the whole thing:
While we do have conditional merge tags available, I'm afraid we do
not have any that would work with Tags. To be transparent, Tags were
recently added a few months ago, and there are some features in our
application that has not updated to work with Tags just yet.
Because conditional merge tags do not work with tags yet, the best
option would be to create multiple automations and send them out based
on each tags. If you do it that way, you'll be able to target those in
specific tags with specific content
Dug a little deeper from the first link. There is another link Use Conditional Merge Tag Blocks which contained the below code:
Name
IF-ELSE
Definition
Use ELSE to indicate alternative content to display if the *|MERGE|* tag value is false.
Example
*|IF:MERGE|* content to display *|ELSE:|* alternative content to display *|END:IF|*
Name
ELSEIF
Definition
Use ELSEIF to specify a new *|MERGE|* tag to be matched against if the first *|MERGE|* tag value is false.
Example
*|IF:TRANSACTIONS >= 20|* Enjoy this 40% off coupon! *|COUPON40|*
*|ELSEIF:TRANSACTIONS >= 10|* Enjoy this 20% off coupon! *|COUPON20|*
*|ELSE:|* Enjoy this 10% off coupon! *|COUPON10|* *|END:IF|*
More examples with definitions can be found here.
Hope this is the answer you were after.
I'm new with liquid and ruby, but I would like to create a custom filter in a collection, to filter by metafields. I already have:
A dropdown in the collection.liquid, with the values I would like to filter for.
When selecting a filter, it goes to a link like: https://myshop.myshopify.com/collections/my-collection/my-filter . Basically it is like the tags, but with my filter instead
However, since it is a custom filter and not a tag, I get no results. I'm wondering where is the query that displays all the products (or filters) is in the code. I know that it depends on the theme, but I'm using the default theme: launchpad-star.
Not sure if I could do it this way or with a link like: https://myshop.myshopify.com/collections/my-collection?filter_by=my-filter , in which case, I would also need where should the logic go.
I've looked at the forums already and found two closed tickets with no responses: https://ecommerce.shopify.com/c/ecommerce-design/t/using-metafields-to-create-filter-drop-downs-in-collection-liquid-187513 and https://ecommerce.shopify.com/c/ecommerce-design/t/using-metafields-to-create-filter-drop-downs-in-collection-liquid-134401 .
Thanks in advance
Probably not the best solution, but this is what I did to solve the problem:
I changed to the second option of the url, so when a user selects an option in the combobox, it is sent to a URL like: myshop.myshopify.com/collections/my-collection?filter_by=my-filter
In product-grid-item.liquid, I'm getting the metafield value of the product and displaying it as a class, and hide all the products as default. In the collection.liquid I read with javascript the value of the parameter (filter_by) and remove the "hide" class of the products with the value of the filter_by as class, so it gets displayed.
I feel that it is not very clean, but it is working as expected. Problems with this solution:
* Not displaying all the products and then filtering them
* I need to display all the products to avoid pagination, which could be a big problem if I have a lot of products.
If anyone could post a better solution, welcome!.
I've used Joel Krooswyk's Print All Backlog Story Cards solution for printing all stories in a backlog.
What I'd like to do is to extend this to have each card print the name of the parent feature that the card belongs to so I can print them all up and lay them on a table for a collaborative estimation session.
The issue is, I'm having trouble finding how to do it.
A snippet of his code in question:
queryArray[0] = {
key: CARD_TYPE,
type: 'hierarchicalrequirement',
query: '((Iteration.Name = "") AND (Release.Name = ""))',
fetch: 'Name,Iteration,Owner,FormattedID,PlanEstimate,ObjectID,Description,UserName',
order: 'Rank'
};
I can't seem to find the element to fetch!
Parent was listed on an example queries page(intended for use in the browser query functionality), with Parent.Name containing the actual text but so that hasn't worked - trying to find a reference that is clear about it seems to be eluding me.
I've looked at the type definition located at:
https://rally1.rallydev.com/slm/webservice/v2.0/typedefinition/?fetch=ObjectID&pagesize=100&pretty=true
Going to the hierarchical requirement's type definition from that page indicates it has a Parent field in one form or another.
I'm not even sure that that one will solve what I'm looking at.
A bit stuck, and I'm not sure what I'm trying to do is even possible with the hierarchical requirement object type.
Note: I assume even if I do find it I'll need to add some code to deal parentless stories- not worried about that though, that's easy enough to deal with once I find the actual value.
Many thanks to anyone who can help :)
I modified Joel's app to include PI/Feature's FormattedID to the cards when a story has a parent PI/Feature.
You may see the code in this github repo.
Parent field of a user story references another user story.
If you want to read a parent portfolio item of a user story, which is a Feature object, use Feature attribute or PortfolioItem attribute. Both will work:
if (data[i].PortfolioItem) {
//feature = data[i].PortfolioItem.FormattedID; //also works
//feature = data[i].Feature.Name; //also works
feature = data[i].Feature.FormattedID;
} else {
feature = "";
}
as long as the version of API is set in the code to 1.37 or above (up to 1.43).
PrintStoryCards app is AppSDK1 app.
1.33 is the latest version of AppSDK1.x
1.29, which the app is using is not aware of PortfoilioItems.
PortfolioItem was introduced in Rally in WS API version 1.37.
See API versioning section in the WS API documentation .
If you want to access Portfolio Items, or other features introduced in later versions of WS API up to 1.43 this syntax will allow it.
<script type="text/javascript" src="/apps/1.33/sdk.js?apiVersion=1.43"></script>
This has to be used with caution. One thing that definitely will break is around calculations of timebox start and end dates. That's why many legacy Rally App Catalog apps are still at 1.29.
This is due to changes in API Version 1.30.
Note that this method of setting a more advanced version of WS API for AppSDK1 does not work with v2.0 of WS API.
You should be able to add PortfolioItem to your fetch. Parent is the field used if the parent is a story. PortfolioItem is the field used if the parent is a Feature (or whatever your lowest level PI is).
Then in the results you can just get it like this:
var featureName = (story.PortfolioItem && story.PortfolioItem.Name) || 'None';