As I understood, select-options in abap just takes 45 characters from UI.
Whatever I assign the type of select-option, it doesnt take more then 45 characters.
SELECT-OPTIONS: s_key FOR somlreci1-receiver NO INTERVALS VISIBLE LENGTH 100.
somlreci1-receiver is char(1215). But I cannot write more than 45 into that select-option.
Any way to increase this length ?
This official link
http://help.sap.com/abapdocu_70/en/ABAPSELECT-OPTIONS.htm
says it isn't possible to pass input larger than 45 chars, sorry :|
At the end of the documentation posted by #vlad-ardelean it mentions that:
If a selection criterion for data types is supplied with data when
calling up an executable program with SUBMIT
...
If the selection criterion is declared with the addition NO-DISPLAY,
no conversion routine or truncation will be performed for the first
row either.
You could declare the select-options as NO-DISPLAY in your main program, then call it from a second program with
SUBMIT programname WITH so_field EQ lv_longdata SIGN 'I'.
...or similar to pass the long value to the main program. It's a pretty convoluted way of doing it, however.
In addition to #vlad-ardelean's answer: It might be interesting to note that in recent releases, the maximum field length was raised to 255 characters (see http://help.sap.com/abapdocu_731/en/ABAPSELECT-OPTIONS.htm).
Related
1 for certain symbols like (/), (,) and (;) while taking input.
2. Timeout error while taking input
3. very big floating value as input
4. and for improper inputs like - 4/3
I found out how to time-out the program after a specific time:
https://gcc.gnu.org/onlinedocs/gcc-4.3.2/gfortran.pdf (find: alarm)
If I interpret your question correctly, you want to check user input for correct values and interpret lists and fractions. I'm assuming you mean from console, a la
read(*,*) character-variable
The other option is to use formatted input, for example
read(*,'(i4)') integer-variable
which would read an integer with four digits.
This method would possibly already remove some of your problems, because the user input has to match the specified format or the program reports a runtime error. It is possible to specify the number of input values as well (separated by whitespace, ',' or ';'). Hence if you know beforehand how many values you are getting, the user can enter lists. If you make the requirements clearer, it will be easier to help. Fortran is a bit finicky for I/O.
If you really need the input to be of a general not-defined-at-compile-time type, you'll have to parse the string. This is also true if you want the user to be able to enter fractions like '4/3'.
I'm not aware of a method to restrict the time which a user has to enter values. It may be possible, but I've never seen it.
For too big or improper values you just can, for example, wrap the read statement in an endless do loop and exit if the number(s) is/are correct
do
read(*,'(i6)') x
if ( (x.lt.1e5).and.(x.ge.0) ) exit
end do
This would request an integer x from the user until the input is smaller than 100 000 and at least 0.
edit after discussion in comments:
The following code may be what you want:
implicit none
integer :: x
character(len=10) :: y
y=''
print*,'Enter one integer:'
do
read(*,'(i10,a)') x,y
if( (y.eq.'').and.(x.lt.1e5) ) exit
print*,'Enter one valid integer, smaller than 100 000, only:'
end do
print*,x
end
It just reads until there is exactly one integer smaller than 100 000 in the input. If you want a better user experience you can catch 'very' invalid input (that the program complains about and stops) with the iostat parameter.
One thing though: on my two available compilers (GCC 4.4.7 and Intel fortran compiler 11.0) the forward slash '/' is not a valid integer input and the program stops. If that is different for your compiler the code above should still work, but I can't test that.
I'm trying to write a function of this form:
Function cont(requestdate As Date)
cont = requestdate
End Function
Unfortunately, when I enter =cont(12/12/2012) into a cell, I do not get my date back. I get a very small number, which I think equals 12 divided by 12 divided by 2012. How can I get this to give me back the date? I do not want the user to have to enter =cont("12/12/2012").
I've attempted to google for an answer, unfortunately, I have not found anything helpful. Please let me know if my vocabulary is correct.
Let's say my user pulled a report with 3 columns, a, b and c. a has beginning of quarter balances, b has end of quarter balances and c has a first and last name. I want my user to put in column d: =cont(a1,b1,c1,12/12/2012) and make it create something like:
BOQ IS 1200, EOQ IS 1300, NAME IS EDDARD STARK, DATE IS 12/12/2012
So we could load this into a database. I apologize for the lack of info the first time around. To be honest, this function wouldn't save me a ton of time. I'm just trying to learn VBA, and thought this would be a good exercise... Then I got stuck.
Hard to tell what you are really trying to accomplish.
Function cont(requestdate As String) As String
cont = Format(Replace(requestdate, ".", "/"), "'mm_dd_YYYY")
End Function
This code will take a string that Excel does not recognize as a number e.g. 12.12.12 and formats it (about the only useful thing I can think of for this UDF) and return it as a string (that is not a number or date) to a cell that is formatted as text.
You can get as fancy as you like in processing the string entered and formatting the string returned - just that BOTH can never be a number or a date (or anything else Excel recognizes.)
There is no way to do exactly what you're trying to do. I will try to explain why.
You might think that because your function requires a Date argument, that this somehow forces or should force that 12/12/2012 to be treated as a Date. And it is treated as a Date — but only after it's evaluated (only if the evaluated expression cannot be interpreted as a Date, then you will get an error).
Why does Excel evaluate this before the function receives it?
Without requiring string qualifiers, how could the application possibly know what type of data you intended, or whether you intended for that to be evaluated? It could not possibly know, so there would be chaos.
Perhaps this is best illustrated by example. Using your function:
=Cont(1/1/0000) should raise an error.
Or consider a very simple formula:
=1/2
Should this formula return .5 (double) or January 2 (date) or should it return "1/2" (string literal)? Ultimately, it has to do one of these, and do that one thing consistently, and the one thing that Excel will do in this case is to evaluate the expression.
TL;DR
Your problem is that unqualified expression will be evaluated before being passed, and this is done to avoid confusion or ambiguity (per examples).
Here is my method for allowing quick date entry into a User Defined Function without wrapping the date in quotes:
Function cont(requestdate As Double) As Date
cont = CDate((Mid(Application.Caller.Formula, 7, 10)))
End Function
The UDF call lines up with the OP's initial request:
=cont(12/12/2012)
I believe that this method would adapt just fine for the OP's more complex ask, but suggest moving the date to the beginning of the call:
=cont(12/12/2012,a1,b1,c1)
I fully expect that this method can be optimized for both speed and flexibility. Working on a project now that might require me to further dig into the speed piece, but it suits my needs in the meantime. Will update if anything useful turns up.
Brief Explanation
Application.Caller returns a Range containing the cell that called the UDF. (See Caveat #2)
Mid returns part of a string (the formula from the range that called the UDF in this case) starting at the specified character count (7) of the specified length (10).
CDate may not actually be necessary, but forces the value into date format if possible.
Caveats
This does require use of the full dd/mm/yyyy (1/1/2012 would fail) but pleasantly still works with my preferred yyyy/mm/dd format as well as covering some other delimiters. dd-mm-yyyy or dd+mm+yyyy would work, but dd.mm.yyyy will not because excel does not recognize it as a valid number.
Additional work would be necessary for this to function as part of a multi-cell array formula because Application.Caller returns a range containing all of the associated cells in that case.
There is no error handling, and =cont(123) or =cont(derp) (basically anything not dd/mm/yyy) will naturally fail.
Disclaimers
A quick note to the folks who are questioning the wisdom of a UDF here: I've got a big grid of items and their associated tasks. With no arguments, my UDF calculates due dates based on a number of item and task parameters. When the optional date is included, the UDF returns a delta between the actual date and what was calculated. I use this delta to monitor and calibrate my calculated due dates.
All of this can absolutely be performed without the UDF, but bulk entry would be considerably more challenging to say the least.
Removing the need for quotes sets my data entry up such that loading =cont( into the clipboard allows my left hand to F2/ctrl-v/tab while my right hand furiously enters dates on the numpad without need to frequently (and awkwardly) shift left-hand position for a shift+'.
Is there any way of programmatically getting the value of a Text Symbol at runtime?
The scenario is that I have a simple report that calls a function module. I receive an exported parameter in variable LV_MSG of type CHAR1. This indicates a certain status message created in the program, for instance F (Fail), X (Match) or E (Error). I currently use a CASE statement to switch on LV_MSG and fill another variable with a short description of the message. These descriptions are maintained as text symbols that I retrieve at compile time with text-MS# where # is the same as the possible returns of LV_MSG, for instance text-MSX has the value "Exact Match Found".
Now it seems to me that the entire CASE statement is unnecessary as I could just assign to my description variable the value of the text symbol with ID 'MS' + LV_MSG (pseudocode, would use CONCATENATE). Now my issue is how I can find a text symbol based on the String representation of its ID at runtime. Is this even possible?
If it is, my code would look cleaner and I wouldn't have to update my actual code when new messages are added in the function module, as I would simply have to add a new text symbol. But would this approach be any faster or would it in fact degrade the report's performance?
Personally, I would probably define a domain and use the fixed values of the domain to represent the values. This way, you would even get around the string concatenation. You can use the function module DD_DOMVALUE_TEXT_GET to easily access the language-dependent text of a domain value.
To access the text elements of a program, use a function module like READ_TEXT_ELEMENTS.
Be aware that generic programming like this will definitely slow down your program. Whether it would make your code look cleaner is in the eye of the beholder - if the values change rarely, I don't see why a simple CASE statement should be inferior to some generic text access.
Hope I understand you correctly but here goes. This is possible with a little trickery, all the text symbols in a report are defined as variables in the program (with the name text-abc where abc is the text ID). So you can use the following:
data: lt_all_text type standard table of textpool with default key,
lsr_text type ref to textpool.
"Load texts - you will only want to do this once
read textpool sy-repid into lt_all_text language sy-langu.
sort lt_all_Text by entry.
"Find a text, the field KEY is the text ID without TEXT-
read table lt_all_text with key entry = i_wanted_text
reference into lsr_text binary search.
If you want the address you can add:
field-symbols: <l_text> type any.
data l_name type string.
data lr_address type ref to data.
concatenate 'TEXT-' lsr_text->key into l_name.
assign (l_name) to <l_text>.
if sy-subrc = 0.
get reference of <l_text> into lr_address.
endif.
As vwegert pointed out this is probably not the best solution, for error handling rather use message classes or exception objects. This is useful in other cases though so now you know how.
I set the culture to Hungarian language, and Chr() seems to be broken.
System.Threading.Thread.CurrentThread.CurrentCulture = "hu-US"
System.Threading.Thread.CurrentThread.CurrentUICulture = "hu-US"
Chr(254)
This returns "ţ" when it should be "þ"
However, Asc("ţ") returns 116.
This: Asc(Chr(254)) returns 116.
Why would Asc() and Chr() be different?
I checked and the 'wide' functions do work correctly: ascw(chrw(254)) = 254
Chr(254) interprets the argument in a system dependent way, by looking at the System.Globalization.CultureInfo.CurrentCulture.TextInfo.ANSICodePage property. See the MSDN article about Chr. You can check whether that value is what you expect. "hu-US" (the hungarian locale as used in the US) might do something strange there.
As a side-note, Asc() has no promise about the used codepage in its current documentation (it was there until 3.0).
Generally I would stick to the unicode variants (ending on -W) if at all possible or use the Encoding class to explicitly specify the conversions.
My best guess is that your Windows tries to represent Chr(254)="ţ" as a combined letter, where the first letter is Chr(116)="t" and the second ("¸" or something like that) cannot be returned because Chr() only returns one letter.
Unicode text should not be handled character-by-character.
It sounds like you need to set the code page for the current thread -- the current culture shouldn't have any effect on Asc and Chr.
Both the Chr docs and the Asc docs have this line:
The returned character depends on the code page for the current thread, which is contained in the ANSICodePage property of the TextInfo class. TextInfo.ANSICodePage can be obtained by specifying System.Globalization.CultureInfo.CurrentCulture.TextInfo.ANSICodePage.
I have seen several problems in VBA on the Mac where characters over 127 and some control characters are not treated properly.
This includes paragraph marks (especially in text copied from the internet or scanned), "¥", and "Ω".
They cannot always be searched for, cannot be used in file names - though they could in the past, and when tested, come up as another ascii number. I have had to write algorithms to change these when files open, as they often look like they are the right character, but then crash some of my macros when they act strangely. The character will look and act right when I save the file, but may be changed when it is reopened.
I will eventually try to switch to unicode, but I am not sure if that will help this issue.
This may not be the issue that you are observing, but I would not rule out isolated problems with certain characters like this. I have sent notes to MS about this in the past but have received no joy.
If you cannot find another solution and the character looks correct when you type it in, then I recommend using a macro snippet like the one below, which I run when updating tables. You of course have to setup theRange as the area you are looking at. A whole file can take a while.
For aChar = 1 To theRange.Characters.count
theRange.Characters(aChar).Select
If Asc(Selection.Text) = 95 And Selection.Text <> "_" Then Selection.TypeText "Ω"
Next aChar
In algebra if I make the statement x + y = 3, the variables I used will hold the values either 2 and 1 or 1 and 2. I know that assignment in programming is not the same thing, but I got to wondering. If I wanted to represent the value of, say, a quantumly weird particle, I would want my variable to have two values at the same time and to have it resolve into one or the other later. Or maybe I'm just dreaming?
Is it possible to say something like i = 3 or 2;?
This is one of the features planned for Perl 6 (junctions), with syntax that should look like my $a = 1|2|3;
If ever implemented, it would work intuitively, like $a==1 being true at the same time as $a==2. Also, for example, $a+1 would give you a value of 2|3|4.
This feature is actually available in Perl5 as well through Perl6::Junction and Quantum::Superpositions modules, but without the syntax sugar (through 'functions' all and any).
At least for comparison (b < any(1,2,3)) it was also available in Microsoft Cω experimental language, however it was not documented anywhere (I just tried it when I was looking at Cω and it just worked).
You can't do this with native types, but there's nothing stopping you from creating a variable object (presuming you are using an OO language) which has a range of values or even a probability density function rather than an actual value.
You will also need to define all the mathematical operators between your variables and your variables and native scalars. Same goes for the equality and assignment operators.
numpy arrays do something similar for vectors and matrices.
That's also the kind of thing you can do in Prolog. You define rules that constraint your variables and then let Prolog resolve them ...
It takes some time to get used to it, but it is wonderful for certain problems once you know how to use it ...
Damien Conways Quantum::Superpositions might do what you want,
https://metacpan.org/pod/Quantum::Superpositions
You might need your crack-pipe however.
What you're asking seems to be how to implement a Fuzzy Logic system. These have been around for some time and you can undoubtedly pick up a library for the common programming languages quite easily.
You could use a struct and handle the operations manualy. Otherwise, no a variable only has 1 value at a time.
A variable is nothing more than an address into memory. That means a variable describes exactly one place in memory (length depending on the type). So as long as we have no "quantum memory" (and we dont have it, and it doesnt look like we will have it in near future), the answer is a NO.
If you want to program and to modell this behaviour, your way would be to use a an array (with length equal to the number of max. multiple values). With this comes the increased runtime, hence the computations must be done on each of the values (e.g. x+y, must compute with 2 different values x1+y1, x2+y2, x1+y2 and x2+y1).
In Perl , you can .
If you use Scalar::Util , you can have a var take 2 values . One if it's used in string context , and another if it's used in a numerical context .