Hello everyone and sorry for my mistakes,
I am new with the virtual machine and I have to work on it. To do so, my school forced me to work on VMWare VSphere Client. The version I am currently using is the 5.5.
My problem is that when I do a right on the desktop, there is an offset between the mouse and the menu. I tried to unistall and reinstall it, but this problem always appears. I also tried to tun it with the Windows 7 compatibility and the others compatibility.
My problem : Offset between the mouse and the menu
I know that this problem is due to my computer because the same version of VMWare VSpere Client works perfectly on similar computers but not on mine.
My computer config :
ASUS K501UW
RAM 8Go
64 Bits
Intel Core i7
Tank you by advance for yours helps.
This is really very late, but perhaps this helps others. I had the mouse click problem with Windows 10 and viclient 5.5 too. This was because I was using custom display scaling in Windows 10. I changed to de-select the option "Let Windows try to fix apps so they're not blurry" and then the mouse clicks worked again in viclient. I did not have to disable custom scaling.
A really simple but dragged me many days that I cannot figure out how:
I've setup synergy on my Mac as a client, using Ubuntu as the server.
But now I wanted to switch to use Mac as server and Ubuntu as client.
The question now I'm facing is that synergy settings page never show up, each time I try to open it, it just appears in less than 0.1 second, then it disappeared.
Because I've set it up already and I don't need the reconfigure the Ip addresses etc.
This is convenient.
But now I wanted to switch server/client roles, I need to reconfigure it, however the settings page of synergy never shows up to let me configure it, does anyone have the same issue?
I tried to uninstall synergy on my Mac, but when I reinstall it back, it automatically configures itself again and quickly disappears and runs in the background.
It's been a pain for me.
You can't start the Server on Yosemite, because you need to grant access to the process (Synergy) to control your computer:
http://mizage.com/help/accessibility.html
doing that with Synergy should work.
Extensively used IE9 Developer Tools and I just updated to IE11 "11.0.2" and the Developer Tools are garbage.
My Network and Profile Tabs are blank.
Is there a "special" setting that I'm missing in order to enable them, or could there be a specific windows hot fix between the IE11 RTM and 11.0.2 that I may be missing?
I had the same problem (version 11.0.9600.17633) on WIN7
Only on one of 4 accounts. Reinstalling IE11, etc did not help.
With regedit, I renamed HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer
to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer Old
I logged off, then logged on again and started Internet Explorer. This recreated the key. The network tab and profiler tab are no longer blank. Internet Explorer settings have been lost however. I assume the settings and state of Internet Explorer are the same as just after creating a new account.
The network tab was not working for me on Windows 10 Creators Update (Version 1703 OS Build 150063.540) in IE OR Edge.
After trying the various registry changes mentioned by others without success, I removed Internet Explorer as a Window Feature (Control Panel > Programs and Features > Turn Windows Features on or off).
I rebooted and opened Edge and the network tab was working again.
Then I went back into Programs and Feature and added IE back as in installed feature. I rebooted and now the network tab is working in both IE and Edge.
To make blank Network Panel/Profiler Panel appear again(also pin F12 developer tool not working either), delete the following registry DWORD key:
HKEY_CURRENT_USER\Software\Microsoft\Internet
Explorer\Main\TabProcGrowth
This key could be recreated automatically.
I still have this problem using IE 11.0.9600.18097 on Win 7 [Version 6.1.7601]. I post my solution here in case someone faces the same situation like me, that your company doesn't allow updating IE on your own. My
Possible related issue tracker:
https://connect.microsoft.com/IE/feedback/details/808417/ie-11-win-7-developer-tools-does-not-pin
Here is the solution: install the following patch from Microsoft and restart your computer:
https://www.microsoft.com/en-us/download/details.aspx?id=46507
This helped me for IE 11, Windows 10:
sc config diagnosticshub.standardcollector.service start=demand
(see https://www.systemcamp.com/network-collection-agent-failed-to-start-in-ie-11-or-edge/)
It's definitely worth getting the latest updates.
There shouldn't be any special settings. The only special/different thing about the network and profiler tools are the two tools that weren't rebuilt in IE11 and were just themed. However they should most definitely work just fine. Though there are some timing bugs that can cause the tools to hang and crash :(. But, that doesn't seem to be happening for you.
I'm a bit of a loss as to make recommendations on how to fix the issue as we've not seen the issue before (I work on the F12 tools at Microsoft).
If you try a different user account does the same issue happen? Is it happening on all your machines or just one? Does it happen on all pages or just some? (try both an intranet and internet site.)
I created a new local account, logged into that account and that solved this problem for me. All of the tabs in the developer tools work and I can now dock the developer tools as well which I could never do before.
more info:
Not sure if this is the full answer but this appears to be related to settings on your computer more then IE itself. For whatever reason I could not change visual settings or apply themes or change the desktop wallpaper. I followed all the online setting changes for fixing those things. Basically it can be setting changes in group policies/registry settings that disable this. However I'm pretty sure at one point I had a virus on my computer and that destroyed my settings so there was no real undoing of all the damage that it had done. So creating a new account was my only answer.
I doubt this would fix the issue but just to make sure it is not being caused by an extension have you tried running IE without extensions?
from run: iexplore.exe -extoff
This happened to me and the answer was that my machine (win8.1) wasn't being patched per the group policy since the rest of the company's on win7 and the patches are controlled.
When I forced the update-- there's a link on the windows update dialog box that says "Check online for updates from Microsoft Update". I got a gig a of stuff to dl and installed it and we were fine after that.
NOTHING until then- wiping bits of the registry, uninstall ie11, reinstall, etc, worked.
Change the value data in DWORD "TabProcGrowth" that located in "HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main" to 1. close and open IE11 .
For me, Network tab stopped working one day and following worked:
Restart Microsoft (R) Diagnostics Hub Standard Collector Service
Just close IE11 and all its tabs and reopen
I have this strange problem in an embedded system (linux) we build, so I don't have normal GUI trouble-shooting tools on Linux or Windows machines.
The problem is the NIC is no longer usable after cable removed. Even if I re-plug the cable, the lights on it never come back on again and nothing can be sent or received. ifconfig still works on the surface, but doesn't have real effect. Only a reboot will solve the problem. I guess the problem is in the ethernet driver.
My question is how the trouble-shoot it. Any clues/hints? Thanks.
====================
Thank you guys! The board is a gumstix and the PHY is SMSC911x. We are running on Linux 3.0.12. It turns out the smsc911x_soft_reset() of the NIC fails when driver calls smsc911x_open(). The symptom also includes we must run ifconfig multiple times (not consistent) to bring the NIC up and the system can detect it.
I did a search on "SMSC911x soft reset failed" and find this link. http://comments.gmane.org/gmane.linux.network/216467. I removed SMSC_PHY=y in the linux build config file and that fixed the problem. It seems the driver is not compatible. Can somebody explain this, or is there a better solution?
I've set up raspbian "wheezy" (more information here, and image file here) on my recently arrived raspberry-pi (model B, but with 256MB RAM). Since I plan to use it via SSH from other locations, I was looking for a way to lock the console on the actual machine.
Raspbian is the first unix based OS I am working with, so I'm not really familiar with it, but I think I am looking for something like "vlock".
I installed vlock like this:
apt-get install vlock
When I now log into my pi via SSH from my Windows PC vlock works just fine, but when I try using it on the machine itself it shows a strange behaviour.
If I enter a wrong password, I get the usual message:
vlock: Authentication failure
but immediately after that the commandline shows up as if I entered the right one. So basically everyone can just roll his or her head over my keyboard to unlock my pi.
Does anyone know if this is a known bug (or even intended)? Or are there any equivalents to vlock that I could try?
Thanks in advance.
PS: This is my first question on stackoverflow so I hope I provided enough information. If I didn't, feel free to comment/ask.