I have common functions, such as syntactic sugar for calling the database, logging or site-wide information such as a look-up tables.
If I put these in a site-wide base class I will have access to them, however it just seems intuitively wrong to use a parent class this way. It would make more sense to use the base class as a 'has a' relationship rather than an 'is a'.
Or perhaps this is good design? Is there any problem doing this?
Parent classes should instantiate some base functionality and a child should instantiate the differentiating code.
IMNSHO, what you are describing is a bastardization of that process.
Ideally you would only want to serializable POCO classes, because they only contain properties and no methods.
Having a baseclass for common functionality might be a good idea, if you place code it in, that will be same in every childpage and if there is no other good place.
For instance you could place Helper-methods inside a baseclass, but that breaks OOP in my opinion.
In my opinion, having a class that derives from System.Web.UI.Page and replaces some logic in the OnInit event or other events is a very good strategy. I've used this approach in various projects, but I limited the code in the baseblass to globalization and logic for memberpages (like redirects to non public pages).
I believe that what you are doing is wrong.
First of all, object should be dedicated to one task. Having db connection handling, logging or look-up tables in the same class seems very ugly, regardless of whether these funcitonalities are inherited or not.
Moreover, the functionalities you described seem like fitting the exact idea of an object, just as described above. So, to answer your question: yes, has-a relationship seems like a much better solution.
In general, I tend to try to put program-wide accessible functions in separate classes. If possible, I try to use static methods. Behind these sometimes are singletons, sometimes there is some kind of queue, and sometimes something entirely different. Still, having one single point of origin for such functionalities the code is very flexible. If static methods are not applicable, especially when there is a need to store some information in such helper class, only then do I instantiate an object for each instance of other class. Even then factory/pool single point of origin static methods are often a good idea.
I was wondering, I recently read an article that spoke of the ills of using the singleton pattern siting the disadvantage of global variable occurrence and rightly that the singleton violates alot of the rules we learn from OOP school, single responsibility principle, programming to interfaces and abstract classes and not to concrete classes... all that good stuff. I was wondering how then do you work with like database connection class where you want just one connection to your DB and one object of your DB floating around. The author spoke of Dependency Injection principle which to my mind stands well with the Dependency Inversion rule. How do I know and control what object gets passed around as a dependency other than the fact that I created the class and expect everyone using it play nice and make sure they are using the right resource?!
Edit: This answer assumes you are using a dependency injection container, either one you wrote yourself, or one you got from a library. If not, then use a DI container :)
How do I know and control what object gets passed around as a dependency other than the fact that I created the class and expect everyone using it play nice and make sure they are using the right resource?!
By contract
The oral contract - You write a design spec that says "thou shalt not instantiate this class directly" and "thou shalt not pass around any object you got from the dependency injection container. Pass the container if you have to".
The compiler contract - You give them a dependency injection container, and they grab the instance out of it, by abstract interface. If you want only a single instance to be used, you can supply them a named instance, which they extract with both the name, and the interface.
ISomething instance = serviceLocator.ResolveInstance<ISomething>(
"TheInstanceImSupposedToUse");
You can also make all your concrete classes private/internal/what-have-you, and only provide them an abstract interface to operate against. This will prevent them from instantiating the classes themselves.
// This can only be instantiated by you, but can be used by them via ISomething
private class ConcreteSomething : ISomething
{
// ...
}
By code review
You make group-wide coding and design standards that are fair, and make sure they are understood by everyone within the group.
You use a source control mechanism, and require code reviews before they check in. You read over their code for what they link to, what headers they include, what objects they instantiate, and what instances they are passing around.
If they violate your rules during code reviews, you don't let them check in until they fix their code. Optionally, for repeat offenders, you make them pay you a dollar, you make them buy you lunch, or you hire a different contractor to replace them. Whatever works well within your group :)
For those who criticize the singleton pattern, based on SRP, here is an opposing view. Also, I've found that dependency injection containers can create as many problems as they solve. That said, I'm using a promising compromise, as covered in another post.
Dependency injection containers (even one you develop yourself, which isn't an entirely uncommon practice) are generally very configurable. What you'd do in that scenario is configure it such that any request for the interface that implementation, well, implements would be satisfied with that implementation. Even if it's a singleton.
For example, take a look at the Logger singleton being used here: http://www.pnpguidance.net/News/StructureMapTutorialDependencyInjectionIoCNET.aspx
Don't take what you read anywhere as absolute truth. Read it, understand it and then you can see when it's best to apply certain things. In your case, why wouldn't you want to create a static singleton?
When do you encourage programming against an interface and not directly to a concrete class?
A guideline that I follow is to create abstractions whenever code requires to cross a logical/physical boundary, most especially when infrastructure-related concerns are involved.
Another checkpoint would be if a dependency will likely change in the future, due to possible additional concerns code (such as caching, transactional awareness, invoking a webservice instead of in-process execution) or if such dependencies have direct references to infrastructure integration points.
If code depends on something that does not require control to cross a logical/physical boundary, I more or less don't create abstractions to interact with those.
Am I missing anything?
Also, use interfaces when
Multiple objects will need to be acted upon in a particular fashion, but are not fundamentally related. Perhaps many of your business objects access a particular utility object, and when they do they need to give a reference of themselves to that utility object so the utility object can call a particular method. Have that method in an interface and pass that interface to that utility object.
Passing around interfaces as parameters can be very helpful in unit testing. Even if you have just one type of object that sports a particular interface, and hence don't really need a defined interface, you might define/implement an interface solely to "fake" that object in unit tests.
related to the first 2 bullets, check out the Observer pattern and the Dependency Injection. I'm not saying to implement these patterns, but they illustrate types of places where interfaces are really helpful.
Another twist on this is for implementing a couple of the SOLID Principals, Open Closed principal and the Interface Segregation principle. Like the previous bullet, don't get stressed about strictly implementing these principals everywhere (right away at least), but use these concepts to help move your thinking away from just what objects go where to thinking more about contracts and dependency
In the end, let's not make it too complicated: we're in a strongly typed world in .NET. If you need to call a method or set a property but the object you're passing/using could be fundamentally different, use an interface.
I would add that if your code is not going to be referenced by another library (for a while at least), then the decision of whether to use an interface in a particular situation is one that you can responsibly put off. The "extract interface" refactoring is easy to do these days. In my current project, I've got an object being passed around that I'm thinking maybe I should switch to an interface; I'm not stressing about it.
Interfaces abstraction are convenient when doing unit test. It helps for mocking test objects. It very useful in TDD for developing without actually using data from your database.
If you don't need any features of the class that aren't found in the Interface...then why not always prefer the Interface implementation?
It will make your code easier to modify in the future and easier to test (mocking).
you have the right idea, already. i would only add a couple of notes to this...
first, abstraction does not mean 'interface'. for example, a "connection string" is an abstraction, even though it's just a string... it's not about the 'type' of the thing in question, it's about the intention of use for that thing.
and secondly, if you are doing test automation of any kind, look for the pain and friction that are exposed by writing the tests. if you find yourself having to set up too many external conditions for a test, it's a sign that you need a better abstraction between the thing your testing and the things it interacts with.
I think you've said it pretty well. Much of this will be a stylistic thing. There are open source projects I've looked at where everything has an interface and an implementation, and it's kind of frustrating, but it might make iterative development a little easier, since any objects implementation can break but dummies will still work. But honestly, I can dummy any class that doesn't overuse the final keyword by inheritance.
I would add to your list this: anything which can be thought of as a black box should be abstracted. This includes some of the things you've mentioned, but it also includes hairy algorithms, which are likely to have multiple useful implementations with different advantages for different situation.
Additionally, interfaces come in handy very often with composite objects. That's the only way something like java's swing library gets anything done, but it can also be useful for more mundane objects. (I personally like having an interface like ValidityChecker with ways to and-compose or or-compose subordinate ValidityCheckers.)
Most of the useful things that come with the Interface passing have been already said. However I would add:
implementing an interface to an object, or later multiple objects, FORCES all the implementers to follow an IDENTICAL pattern to implement contract with the object. This can be useful in case you have not so OOP-experienced-programmers actually writing the implementation code.
in some languages you can add attributes on the interface itself, which can be different from the actual object implementation attribute as sense and intent
From what I have read best practice is to have classes based on an interface and loosely couple the objects, in order to help code re-use and unit test.
Is this correct and is it a rule that should always be followed?
The reason I ask is I have recently worked on a system with 100’s of very different objects. A few shared common interfaces but most do not and wonder if it should have had an interface mirroring every property and function in those classes?
I am using C# and dot net 2.0 however I believe this question would fit many languages.
It's useful for objects which really provide a service - authentication, storage etc. For simple types which don't have any further dependencies, and where there are never going to be any alternative implementations, I think it's okay to use the concrete types.
If you go overboard with this kind of thing, you end up spending a lot of time mocking/stubbing everything in the world - which can often end up creating brittle tests.
Not really. Service components (class that do things for your application) are a good fit for interfaces, but as a rule I wouldn't bother having interfaces for, say, basic entity classes.
For example:
If you're working on a domain model, then that model shouldn't be interfaces. However if that domain model wants to call service classes (like data access, operating system functions etc) then you should be looking at interfaces for those components. This reduces coupling between the classes and means it's the interface, or "contract" that is coupled.
In this situation you then start to find it much easier to write unit tests (because you can have stubs/mocks/fakes for database access etc) and can use IoC to swap components without recompiling your applications.
I'd only use interfaces where that level of abstraction was required - i.e. you need to use polymorphic behaviour. Common examples would be dependency injection or where you have a factory-type scenario going on somewhere, or you need to establish a "multiple inheritance" type behaviour.
In my case, with my development style, this is quite often (I favour aggregation over deep inheritance hierarchies for most things other than UI controls), but I have seen perfectly fine apps that use very little. It all depends...
Oh yes, and if you do go heavily into interfaces - beware web services. If you need to expose your object methods via a web service they can't really return or take interface types, only concrete types (unless you are going to hand-write all your own serialization/deserialization). Yes, that has bitten me big time...
A downside to interface is that they can't be versioned. Once you shipped the interface you won't be making changes to it. If you use abstract classes then you can easily extend the contract over time by adding new methods and flagging them as virtual.
As an example, all stream objects in .NET derive from System.IO.Stream which is an abstract class. This makes it easy for Microsoft to add new features. In version 2 of the frameworkj they added the ReadTimeout and WriteTimeout properties without breaking any code. If they used an interface(say IStream) then they wouldn't have been able to do this. Instead they'd have had to create a new interface to define the timeout methods and we'd have to write code to conditionally cast to this interface if we wanted to use the functionality.
Interfaces should be used when you want to clearly define the interaction between two different sections of your software. Especially when it is possible that you want to rip out either end of the connection and replace it with something else.
For example in my CAM application I have a CuttingPath connected to a Collection of Points. It makes no sense to have a IPointList interface as CuttingPaths are always going to be comprised of Points in my application.
However I uses the interface IMotionController to communicate with the machine because we support many different types of cutting machine each with their own commend set and method of communications. So in that case it makes sense to put it behind a interface as one installation may be using a different machine than another.
Our applications has been maintain since the mid 80s and went to a object oriented design in late 90s. I have found that what could change greatly exceeded what I originally thought and the use of interfaces has grown. For example it used to be that our DrawingPath was comprised of points. But now it is comprised of entities (splines, arcs, ec) So it is pointed to a EntityList that is a collection of Object implementing IEntity interface.
But that change was propelled by the realization that a DrawingPath could be drawn using many different methods. Once that it was realized that a variety of drawing methods was needed then the need for a interface as opposed to a fixed relationship to a Entity Object was indicated.
Note that in our system DrawingPaths are rendered down to a low level cutting path which are always series of point segments.
I tried to take the advice of 'code to an interface' literally on a recent project. The end result was essentially duplication of the public interface (small i) of each class precisely once in an Interface (big I) implementation. This is pretty pointless in practice.
A better strategy I feel is to confine your interface implementations to verbs:
Print()
Draw()
Save()
Serialize()
Update()
...etc etc. This means that classes whose primary role is to store data - and if your code is well-designed they would usually only do that - don't want or need interface implementations. Anywhere you might want runtime-configurable behaviour, for example a variety of different graph styles representing the same data.
It's better still when the thing asking for the work really doesn't want to know how the work is done. This means you can give it a macguffin that it can simply trust will do whatever its public interface says it does, and let the component in question simply choose when to do the work.
I agree with kpollock. Interfaces are used to get a common ground for objects. The fact that they can be used in IOC containers and other purposes is an added feature.
Let's say you have several types of customer classes that vary slightly but have common properties. In this case it is great to have a ICustomer interface to bound them together, logicaly. By doing that you could create a CustomerHander class/method that handels ICustomer objects the same way instead of creating a handerl method for each variation of customers.
This is the strength of interfaces.
If you only have a single class that implements an interface, then the interface isn't to much help, it just sits there and does nothing.
If I understand correctly, the typical mechanism for Dependency Injection is to inject either through a class' constructor or through a public property (member) of the class.
This exposes the dependency being injected and violates the OOP principle of encapsulation.
Am I correct in identifying this tradeoff? How do you deal with this issue?
Please also see my answer to my own question below.
There is another way of looking at this issue that you might find interesting.
When we use IoC/dependency injection, we're not using OOP concepts. Admittedly we're using an OO language as the 'host', but the ideas behind IoC come from component-oriented software engineering, not OO.
Component software is all about managing dependencies - an example in common use is .NET's Assembly mechanism. Each assembly publishes the list of assemblies that it references, and this makes it much easier to pull together (and validate) the pieces needed for a running application.
By applying similar techniques in our OO programs via IoC, we aim to make programs easier to configure and maintain. Publishing dependencies (as constructor parameters or whatever) is a key part of this. Encapsulation doesn't really apply, as in the component/service oriented world, there is no 'implementation type' for details to leak from.
Unfortunately our languages don't currently segregate the fine-grained, object-oriented concepts from the coarser-grained component-oriented ones, so this is a distinction that you have to hold in your mind only :)
It's a good question - but at some point, encapsulation in its purest form needs to be violated if the object is ever to have its dependency fulfilled. Some provider of the dependency must know both that the object in question requires a Foo, and the provider has to have a way of providing the Foo to the object.
Classically this latter case is handled as you say, through constructor arguments or setter methods. However, this is not necessarily true - I know that the latest versions of the Spring DI framework in Java, for example, let you annotate private fields (e.g. with #Autowired) and the dependency will be set via reflection without you needing to expose the dependency through any of the classes public methods/constructors. This might be the kind of solution you were looking for.
That said, I don't think that constructor injection is much of a problem, either. I've always felt that objects should be fully valid after construction, such that anything they need in order to perform their role (i.e. be in a valid state) should be supplied through the constructor anyway. If you have an object that requires a collaborator to work, it seems fine to me that the constructor publically advertises this requirement and ensures it is fulfilled when a new instance of the class is created.
Ideally when dealing with objects, you interact with them through an interface anyway, and the more you do this (and have dependencies wired through DI), the less you actually have to deal with constructors yourself. In the ideal situation, your code doesn't deal with or even ever create concrete instances of classes; so it just gets given an IFoo through DI, without worrying about what the constructor of FooImpl indicates it needs to do its job, and in fact without even being aware of FooImpl's existance. From this point of view, the encapsulation is perfect.
This is an opinion of course, but to my mind DI doesn't necessarily violate encapsulation and in fact can help it by centralising all of the necessary knowledge of internals into one place. Not only is this a good thing in itself, but even better this place is outside your own codebase, so none of the code you write needs to know about classes' dependencies.
This exposes the dependency being injected and violates the OOP principle of encapsulation.
Well, frankly speaking, everything violates encapsulation. :) It's a kind of a tender principle that must be treated well.
So, what violates encapsulation?
Inheritance does.
"Because inheritance exposes a subclass to details of its parent's implementation, it's often said that 'inheritance breaks encapsulation'". (Gang of Four 1995:19)
Aspect-oriented programming does. For example, you register onMethodCall() callback and that gives you a great opportunity to inject code to the normal method evaluation, adding strange side-effects etc.
Friend declaration in C++ does.
Class extention in Ruby does. Just redefine a string method somewhere after a string class was fully defined.
Well, a lot of stuff does.
Encapsulation is a good and important principle. But not the only one.
switch (principle)
{
case encapsulation:
if (there_is_a_reason)
break!
}
Yes, DI violates encapsulation (also known as "information hiding").
But the real problem comes when developers use it as an excuse to violate the KISS (Keep It Short and Simple) and YAGNI (You Ain't Gonna Need It) principles.
Personally, I prefer simple and effective solutions. I mostly use the "new" operator to instantiate stateful dependencies whenever and wherever they are needed. It is simple, well encapsulated, easy to understand, and easy to test. So, why not?
A good depenancy injection container/system will allow for constructor injection. The dependant objects will be encapsulated, and need not be exposed publicly at all. Further, by using a DP system, none of your code even "knows" the details of how the object is constructed, possibly even including the object being constructed. There is more encapsulation in this case since nearly all of your code not only is shielded from knowledge of the encapsulated objects, but does not even participate in the objects construction.
Now, I am assuming you are comparing against the case where the created object creates its own encapsulated objects, most likely in its constructor. My understanding of DP is that we want to take this responsibility away from the object and give it to someone else. To that end, the "someone else", which is the DP container in this case, does have intimate knowledge which "violates" encapsulation; the benefit is that it pulls that knowledge out of the object, iteself. Someone has to have it. The rest of your application does not.
I would think of it this way: The dependancy injection container/system violates encapsulation, but your code does not. In fact, your code is more "encapsulated" then ever.
This is similar to the upvoted answer but I want to think out loud - perhaps others see things this way as well.
Classical OO uses constructors to define the public "initialization" contract for consumers of the class (hiding ALL implementation details; aka encapsulation). This contract can ensure that after instantiation you have a ready-to-use object (i.e. no additional initialization steps to be remembered (er, forgotten) by the user).
(constructor) DI undeniably breaks encapsulation by bleeding implemenation detail through this public constructor interface. As long as we still consider the public constructor responsible for defining the initialization contract for users, we have created a horrible violation of encapsulation.
Theoretical Example:
Class Foo has 4 methods and needs an integer for initialization, so its constructor looks like Foo(int size) and it's immediately clear to users of class Foo that they must provide a size at instantiation in order for Foo to work.
Say this particular implementation of Foo may also need a IWidget to do its job. Constructor injection of this dependency would have us create a constructor like Foo(int size, IWidget widget)
What irks me about this is now we have a constructor that's blending initialization data with dependencies - one input is of interest to the user of the class (size), the other is an internal dependency that only serves to confuse the user and is an implementation detail (widget).
The size parameter is NOT a dependency - it's simple a per-instance initialization value. IoC is dandy for external dependencies (like widget) but not for internal state initialization.
Even worse, what if the Widget is only necessary for 2 of the 4 methods on this class; I may be incurring instantiation overhead for Widget even though it may not be used!
How to compromise/reconcile this?
One approach is to switch exclusively to interfaces to define the operation contract; and abolish the use of constructors by users.
To be consistent, all objects would have to be accessed through interfaces only, and instantiated only through some form of resolver (like an IOC/DI container). Only the container gets to instantiate things.
That takes care of the Widget dependency, but how do we initialize "size" without resorting to a separate initialization method on the Foo interface? Using this solution, we lost the ability to ensure that an instance of Foo is fully initialized by the time you get the instance. Bummer, because I really like the idea and simplicity of constructor injection.
How do I achieve guaranteed initialization in this DI world, when initialization is MORE than ONLY external dependencies?
As Jeff Sternal pointed out in a comment to the question, the answer is entirely dependent on how you define encapsulation.
There seem to be two main camps of what encapsulation means:
Everything related to the object is a method on an object. So, a File object may have methods to Save, Print, Display, ModifyText, etc.
An object is its own little world, and does not depend on outside behavior.
These two definitions are in direct contradiction to each other. If a File object can print itself, it will depend heavily on the printer's behavior. On the other hand, if it merely knows about something that can print for it (an IFilePrinter or some such interface), then the File object doesn't have to know anything about printing, and so working with it will bring less dependencies into the object.
So, dependency injection will break encapsulation if you use the first definition. But, frankly I don't know if I like the first definition - it clearly doesn't scale (if it did, MS Word would be one big class).
On the other hand, dependency injection is nearly mandatory if you're using the second definition of encapsulation.
It doesn't violate encapsulation. You're providing a collaborator, but the class gets to decide how it is used. As long as you follow Tell don't ask things are fine. I find constructer injection preferable, but setters can be fine as well as long as they're smart. That is they contain logic to maintain the invariants the class represents.
Pure encapsulation is an ideal that can never be achieved. If all dependencies were hidden then you wouldn't have the need for DI at all. Think about it this way, if you truly have private values that can be internalized within the object, say for instance the integer value of the speed of a car object, then you have no external dependency and no need to invert or inject that dependency. These sorts of internal state values that are operated on purely by private functions are what you want to encapsulate always.
But if you're building a car that wants a certain kind of engine object then you have an external dependency. You can either instantiate that engine -- for instance new GMOverHeadCamEngine() -- internally within the car object's constructor, preserving encapsulation but creating a much more insidious coupling to a concrete class GMOverHeadCamEngine, or you can inject it, allowing your Car object to operate agnostically (and much more robustly) on for example an interface IEngine without the concrete dependency. Whether you use an IOC container or simple DI to achieve this is not the point -- the point is that you've got a Car that can use many kinds of engines without being coupled to any of them, thus making your codebase more flexible and less prone to side effects.
DI is not a violation of encapsulation, it is a way of minimizing the coupling when encapsulation is necessarily broken as a matter of course within virtually every OOP project. Injecting a dependency into an interface externally minimizes coupling side effects and allows your classes to remain agnostic about implementation.
It depends on whether the dependency is really an implementation detail or something that the client would want/need to know about in some way or another. One thing that is relevant is what level of abstraction the class is targeting. Here are some examples:
If you have a method that uses caching under the hood to speed up calls, then the cache object should be a Singleton or something and should not be injected. The fact that the cache is being used at all is an implementation detail that the clients of your class should not have to care about.
If your class needs to output streams of data, it probably makes sense to inject the output stream so that the class can easily output the results to an array, a file, or wherever else someone else might want to send the data.
For a gray area, let's say you have a class that does some monte carlo simulation. It needs a source of randomness. On the one hand, the fact that it needs this is an implementation detail in that the client really doesn't care exactly where the randomness comes from. On the other hand, since real-world random number generators make tradeoffs between degree of randomness, speed, etc. that the client may want to control, and the client may want to control seeding to get repeatable behavior, injection may make sense. In this case, I'd suggest offering a way of creating the class without specifying a random number generator, and use a thread-local Singleton as the default. If/when the need for finer control arises, provide another constructor that allows for a source of randomness to be injected.
Having struggled with the issue a little further, I am now in the opinion that Dependency Injection does (at this time) violate encapsulation to some degree. Don't get me wrong though - I think that using dependency injection is well worth the tradeoff in most cases.
The case for why DI violates encapsulation becomes clear when the component you are working on is to be delivered to an "external" party (think of writing a library for a customer).
When my component requires sub-components to be injected via the constructor (or public properties) there's no guarantee for
"preventing users from setting the internal data of the component into an invalid or inconsistent state".
At the same time it cannot be said that
"users of the component (other pieces of software) only need to know what the component does, and cannot make themselves dependent on the details of how it does it".
Both quotes are from wikipedia.
To give a specific example: I need to deliver a client-side DLL that simplifies and hides communication to a WCF service (essentially a remote facade). Because it depends on 3 different WCF proxy classes, if I take the DI approach I am forced to expose them via the constructor. With that I expose the internals of my communication layer which I am trying to hide.
Generally I am all for DI. In this particular (extreme) example, it strikes me as dangerous.
I struggled with this notion as well. At first, the 'requirement' to use the DI container (like Spring) to instantiate an object felt like jumping thru hoops. But in reality, it's really not a hoop - it's just another 'published' way to create objects I need. Sure, encapsulation is 'broken' becuase someone 'outside the class' knows what it needs, but it really isn't the rest of the system that knows that - it's the DI container. Nothing magical happens differently because DI 'knows' one object needs another.
In fact it gets even better - by focusing on Factories and Repositories I don't even have to know DI is involved at all! That to me puts the lid back on encapsulation. Whew!
I belive in simplicity. Applying IOC/Dependecy Injection in Domain classes does not make any improvement except making the code much more harder to main by having an external xml files describing the relation. Many technologies like EJB 1.0/2.0 & struts 1.1 are reversing back by reducing the stuff the put in XML and try put them in code as annoation etc. So applying IOC for all the classes you develope will make the code non-sense.
IOC has it benefits when the dependent object is not ready for creation at compile time. This can happend in most of the infrasture abstract level architecture components, trying establish a common base framework which may need to work for different scenarios. In those places usage IOC makes more sense. Still this does not make the code more simple / maintainable.
As all the other technologies, this too has PROs & CONs. My worry is, we implement latest technologies in all the places irrespective of their best context usage.
Encapsulation is only broken if a class has both the responsibility to create the object (which requires knowledge of implementation details) and then uses the class (which does not require knowledge of these details). I'll explain why, but first a quick car anaology:
When I was driving my old 1971 Kombi,
I could press the accelerator and it
went (slightly) quicker. I did not
need to know why, but the guys who
built the Kombi at the factory knew
exactly why.
But back to the coding. Encapsulation is "hiding an implementation detail from something using that implementation." Encapsulation is a good thing because the implementation details can change without the user of the class knowing.
When using dependency injection, constructor injection is used to construct service type objects (as opposed to entity/value objects which model state). Any member variables in service type object represent implementation details that should not leak out. e.g. socket port number, database credentials, another class to call to perform encryption, a cache, etc.
The constructor is relevant when the class is being initially created. This happens during the construction-phase while your DI container (or factory) wires together all the service objects. The DI container only knows about implementation details. It knows all about implementation details like the guys at the Kombi factory know about spark plugs.
At run-time, the service object that was created is called apon to do some real work. At this time, the caller of the object knows nothing of the implementation details.
That's me driving my Kombi to the beach.
Now, back to encapsulation. If implementation details change, then the class using that implementation at run-time does not need to change. Encapsulation is not broken.
I can drive my new car to the beach too. Encapsulation is not broken.
If implementation details change, the DI container (or factory) does need to change. You were never trying to hide implementation details from the factory in the first place.
DI violates Encapsulation for NON-Shared objects - period. Shared objects have a lifespan outside of the object being created, and thus must be AGGREGATED into the object being created. Objects that are private to the object being created should be COMPOSED into the created object - when the created object is destroyed, it takes the composed object with it.
Let's take the human body as an example. What's composed and what's aggregated. If we were to use DI, the human body constructor would have 100's of objects. Many of the organs, for example, are (potentially) replaceable. But, they are still composed into the body. Blood cells are created in the body (and destroyed) everyday, without the need for external influences (other than protein). Thus, blood cells are created internally by the body - new BloodCell().
Advocators of DI argue that an object should NEVER use the new operator.
That "purist" approach not only violates encapsulation but also the Liskov Substitution Principle for whoever is creating the object.
PS. By providing Dependency Injection you do not necessarily break Encapsulation. Example:
obj.inject_dependency( factory.get_instance_of_unknown_class(x) );
Client code does not know implementation details still.
Maybe this is a naive way of thinking about it, but what is the difference between a constructor that takes in an integer parameter and a constructor that takes in a service as a parameter? Does this mean that defining an integer outside the new object and feeding it into the object breaks encapsulation? If the service is only used within the new object, I don't see how that would break encapsulation.
Also, by using some sort of autowiring feature (Autofac for C#, for example), it makes the code extremely clean. By building extension methods for the Autofac builder, I was able to cut out a LOT of DI configuration code that I would have had to maintain over time as the list of dependencies grew.
I think it's self evident that at the very least DI significantly weakens encapsulation. In additional to that here are some other downsides of DI to consider.
It makes code harder to reuse. A module which a client can use without having to explicitly provide dependencies to, is obviously easier to use than one where the client has to somehow discover what that component's dependencies are and then somehow make them available. For example a component originally created to be used in an ASP application may expect to have its dependencies provided by a DI container that provides object instances with lifetimes related to client http requests. This may not be simple to reproduce in another client that does not come with the same built in DI container as the original ASP application.
It can make code more fragile. Dependencies provided by interface specification can be implemented in unexpected ways which gives rise to a whole class of runtime bugs that are not possible with a statically resolved concrete dependency.
It can make code less flexible in the sense that you may end up with fewer choices about how you want it to work. Not every class needs to have all its dependencies in existence for the entire lifetime of the owning instance, yet with many DI implementations you have no other option.
With that in mind I think the most important question then becomes, "does a particular dependency need to be externally specified at all?". In practise I have rarely found it necessary to make a dependency externally supplied just to support testing.
Where a dependency genuinely needs to be externally supplied, that normally suggests that the relation between the objects is a collaboration rather than an internal dependency, in which case the appropriate goal is then encapsulation of each class, rather than encapsulation of one class inside the other.
In my experience the main problem regarding the use of DI is that whether you start with an application framework with built in DI, or you add DI support to your codebase, for some reason people assume that since you have DI support that must be the correct way to instantiate everything. They just never even bother to ask the question "does this dependency need to be externally specified?". And worse, they also start trying to force everyone else to use the DI support for everything too.
The result of this is that inexorably your codebase starts to devolve into a state where creating any instance of anything in your codebase requires reams of obtuse DI container configuration, and debugging anything is twice as hard because you have the extra workload of trying to identify how and where anything was instantiated.
So my answer to the question is this. Use DI where you can identify an actual problem that it solves for you, which you can't solve more simply any other way.
I agree that taken to an extreme, DI can violate encapsulation. Usually DI exposes dependencies which were never truly encapsulated. Here's a simplified example borrowed from Miško Hevery's Singletons are Pathological Liars:
You start with a CreditCard test and write a simple unit test.
#Test
public void creditCard_Charge()
{
CreditCard c = new CreditCard("1234 5678 9012 3456", 5, 2008);
c.charge(100);
}
Next month you get a bill for $100. Why did you get charged? The unit test affected a production database. Internally, CreditCard calls Database.getInstance(). Refactoring CreditCard so that it takes a DatabaseInterface in its constructor exposes the fact that there's dependency. But I would argue that the dependency was never encapsulated to begin with since the CreditCard class causes externally visible side effects. If you want to test CreditCard without refactoring, you can certainly observe the dependency.
#Before
public void setUp()
{
Database.setInstance(new MockDatabase());
}
#After
public void tearDown()
{
Database.resetInstance();
}
I don't think it's worth worrying whether exposing the Database as a dependency reduces encapsulation, because it's a good design. Not all DI decisions will be so straight forward. However, none of the other answers show a counter example.
I think it's a matter of scope. When you define encapsulation (not letting know how) you must define what is the encapsuled functionality.
Class as is: what you are encapsulating is the only responsability of the class. What it knows how to do. By example, sorting. If you inject some comparator for ordering, let's say, clients, that's not part of the encapsuled thing: quicksort.
Configured functionality: if you want to provide a ready-to-use functionality then you are not providing QuickSort class, but an instance of QuickSort class configured with a Comparator. In that case the code responsible for creating and configuring that must be hidden from the user code. And that's the encapsulation.
When you are programming classes, it is, implementing single responsibilities into classes, you are using option 1.
When you are programming applications, it is, making something that undertakes some useful concrete work then you are repeteadily using option 2.
This is the implementation of the configured instance:
<bean id="clientSorter" class="QuickSort">
<property name="comparator">
<bean class="ClientComparator"/>
</property>
</bean>
This is how some other client code use it:
<bean id="clientService" class"...">
<property name="sorter" ref="clientSorter"/>
</bean>
It is encapsulated because if you change implementation (you change clientSorter bean definition) it doesn't break client use. Maybe, as you use xml files with all written together you are seeing all the details. But believe me, the client code (ClientService)
don't know nothing about its sorter.
It's probably worth mentioning that Encapsulation is somewhat perspective dependent.
public class A {
private B b;
public A() {
this.b = new B();
}
}
public class A {
private B b;
public A(B b) {
this.b = b;
}
}
From the perspective of someone working on the A class, in the second example A knows a lot less about the nature of this.b
Whereas without DI
new A()
vs
new A(new B())
The person looking at this code knows more about the nature of A in the second example.
With DI, at least all that leaked knowledge is in one place.