I'm hooking spamd up to my email program, and when I use the "TELL" command to send it a known SPAM email, the log shows:
spamd: Tell: Did nothing for (unknown):0 in 0.1 seconds, 13194 bytes
Is this normal? Or am I screwing something up?
There can be more than one issue with your setup if you're getting this message.
Since it says unknown instead of username, it appears that you are not passing a User: <xyz> header to spamd.
Try doing a TELL call after #1. If you still get the same message("Did nothing for", then use spamd with debug mode enabled (-D) if there was an issue in connecting to/opening your tokens DB.
Related
I'm using a Telit UL865-NAD to connect to a webpage to get data from a php file.
The main problem is that the HTTPRCV command hangs.
See code below:
OK
AT#CIMI
#CIMI: 730011235559846
OK
AT+CCID
+CCID: 89560100000992123469
OK
AT+CGMI
Telit
OK
AT+CGMM
UL865-NAD
OK
AT+CGMR
12.00.716
OK
AT+CGDCONT=1,"IP","imovil.entelpcs.cl"
AT+CGDCONT=1,"IP","imovil.entelpcs.cl"
OK
AT#SGACT=1,1
#SGACT: 10.166.148.143
OK
AT#HTTPCFG=0,"www.xxxx-xxxxxx.com",80,0,,,0,120,1
AT#HTTPCFG=0,"www.xxxx-xxxxxx.com",80,0,,,0,120,1
OK
AT#HTTPQRY=0,0,"/Inagrap/"
OK
#HTTPRING: 0,200,"text/html;charset=ISO-8859-1",1136
AT#HTTPRCV=0
The AT#HTTPQRY command, refers to the directory where the php file resides.
A second issue,
If I include the php file:
AT#HTTPQRY=0,0,"/Inagrap/my.php?D1=val1&D2=val2..."
The HTTPRING indicates '0' data
*** Edit Further info
If I test the page through a browser it gives me a response, yet
testing through the modem, HTTPRING indicates '0' data.
The page inserts the data passed in with the GET, to a database.
If I access the page through a browser, data gets inserted into the database.
But run through the modem, nothing happens.
It's strange the modem gives me responses indicating that I connect to the page, it indicates a http status of 200, yet no data is returned and the web code is not executed.
Why?
After the AT#SGACT command, an AT&K0 command is required to turn off flow control.
Two days wracking my brain for this simple omission.
I'm trying to get a BG95 to activate on hologram.
Here are my commands:
AT+QCFG="band",F,180A,180A OK
AT+QCFG="iotopmode",2 OK
AT+QCFG="nwscanseq",020301 OK
AT+QCFG="nwscanmode",0 OK
AT+QCFG="snrscan",0 OK
AT+QICSGP=1,1,"hologram","","",1 OK
AT+QIACT=1 ERROR
At first I thought it was antenna/signal related so I ran AT+CSQ and got this:
+csq: 11,99
This tells me I have a good signal I believe.
Next I tried AT+QNWINFO and get this:
+QNWINFO: "eMTC","311480","LTE BAND 13",5230
In my mind this is saying it's connected to a network.
After trying that I tried to activate again and got this:
AT+QIACT=1
ERROR
The weird thing is it activated just fine about a week ago with pure AT commands. I did try and use an Arduino library with it (WisLTEBG96TCPIP) which may have changed a setting in it. I've done a factory reset but the it still woln't activate.
Another strange thing is the hologram dashboard. Every once and a while it will show the SIM as connected, even though I can't activate.
I have tried with 2 different SIM cards any get the same activation error.
Any help would be greatly appreciated!
Verizon has cut off all non ODI products. If your hardware has not been Verizon ODI 'certified' it will no longer be allow to be connected to their network, I have 5 new pet rocks thanks to them. The solution is to purchase new modems from vendors that have been through the Verizon ODI program or switch carriers.
I had the same problem before, after a lot of maling with network operator I find out that there isn't a LTE-CAT-M1 (eMTC) network in my area, I tested in another area successfully
Also before setting AT+QCFG commands try AT+CFUN = 0
and after setting AT+QCFG commands try AT+CFUN = 1 .
before sending AT+QIACT, try 'AT+CEREG?' command several times and tell me what is the return of it
I have an API in WSO2. When I try to test it in the store with valid parameters via GET, it returns the following error message:
<am:fault xmlns:am="http://wso2.org/apimanager">
<am:code>101504</am:code>
<am:type>Status report</am:type>
<am:message>Runtime Error</am:message>
<am:description>Send timeout</am:description>
</am:fault>
I have already searched and tried a lot, but with no success, always returning the same error. Don't know if helps, but the api that I try to access is a PHP file.
Any ideas?
EDIT:
I have identical apis to this one, changing only the response, that are working properly. Even if I erase the php file that the API is pointing, the error keep coming.
EDIT:
I changed the code in Management Console, in Metadata>List>APIs:
{"production_endpoints":
{"url":"http://site/myapi.php","config":
{"format":"leave-as-is","optimize":"leave-as-
is","actionSelect":"fault","actionDuration":30000}},
"sandbox_endpoints":
{"url":"http://site/myapi.php","config":
{"format":"leave-as-is","optimize":"leave-as-
is","actionSelect":"fault","actionDuration":30000}},
"implementation_status":"managed","endpoint_type":"http"}
to this:
{"production_endpoints":
{"url":"http://10.20.40.189/ConsultaAutorizacaoCadPos.php","config":null},
"sandbox_endpoints":{"url":"http://10.20.40.189/ConsultaAutorizacaoCadPos.php","config":null},
"implementation_status":"managed","endpoint_type":"http"}
And this error message vanishes. But this new one appears:
<am:fault xmlns:am="http://wso2.org/apimanager">
<am:code>303001</am:code>
<am:type>Status report</am:type>
<am:message>Runtime Error</am:message>
<am:description>Currently , Address endpoint : [ Name : admin--myapi_APIproductionEndpoint_0 ] [ State : SUSPENDED ]</am:description>
EDIT: this error message is appearing just sometimes. Most of the time the request takes long time to run and then returns nothing( no content )
Any ideas how to solve it?
I'm maintaining an antedeluvian Notes application which connects to a SAP back-end via a manually done 'Webservice'
The server is running Domino Release 7.0.4FP2 HF97.
The Webservice is not the more recently Webservice Consumer, but a large Java agent which is using Apache soap.jar (org.apache.soap). Below an example of the calling code.
private Call setupSOAPCall() {
Call call = new Call();
SOAPHTTPConnection conn = new SOAPHTTPConnection();
call.setSOAPTransport(conn);
call.setEncodingStyleURI(Constants.NS_URI_SOAP_ENC);
There has been a change in the SAP system which is now taking 8 minutes to complete (verified by SAP Team).
I'm getting an error message as follows:
[SOAPException: faultCode=SOAP-ENV:Client; msg=For input string: "906 "; targetException=java.lang.NumberFormatException: For input string: "906 "]
I found a blog article describing the error message quite closely:
https://thejavablog.wordpress.com/category/jmeter/
and I've come to the hypothesis that it is a timeout message that is returning to my Call object and that this timeout message is being incorrectly parsed, hence the NumberFormat Exception.
Looking at my logs I can see that there is a time difference of 62 seconds between my call and the response.
I recommended that the server setting in the server document, tab Internet Protocols/HTTP/Timeouts/Request timeouts be changed from 60 seconds to 600 seconds, and the http task restarted with
tell http restart
I've re-run the tests and I am getting the same error, and the time difference is still slightly more than 60 seconds, which is not what I was expecting.
I read Michael Rulnau's blog entry
http://www.mruhnau.net/2014/06/how-to-overcome-domino-webservice.html
which points to this APR
http://www-01.ibm.com/support/docview.wss?uid=swg1LO48272
but I'm not convinced that this would apply in this case, since there is no way that IBM would know that my Java agent is in fact making a Soap call.
My current hypothesis is that I have to use either the setTimeout() method on
org.apache.axis.client.Call
https://axis.apache.org/axis/java/apiDocs/org/apache/axis/client/Call.html
or on the org.apache.soap.transport.http.SOAPHTTPConnection
https://docs.oracle.com/cd/B13789_01/appdev.101/b12024/org/apache/soap/transport/http/SOAPHTTPConnection.html
and that the timeout value is an apache default, not something that is controlled by the Domino server.
I'd be grateful for any help.
I understand your approach, and I hope this is the correct one to solve your problem.
Add a debug (console write would be fine) that display the default Timeout then try to increase it to 10 min.
SOAPHTTPConnection conn = new SOAPHTTPConnection();
System.out.println("time out is :" + conn.getTimeout());
conn.setTimeout(600000);//10 min in ms
System.out.println("after setting it, time out is :" + conn.getTimeout());
call.setSOAPTransport(conn);
Now keep in mind that Dommino has also a Max LotusScript/Java execution time, check this value and (at least for a try) change it: http://www.ibm.com/support/knowledgecenter/SSKTMJ_9.0.1/admin/othr_servertasksagentmanagertab_r.html (it's version 9 help but this part should be identical)
I've since discovered that it wasn't my code generating the error; the default timeout for the apache axis SOAPHTTPConnetion is 0, i.e. no timeout.
I had this error pop up on exactly the 3rd line of code below. There seem to be no explanation on the Internet for this behaviour.
I'm looking at why this error came up, and fixed itself after few minutes.
Set Ftp = CreateObject("Reflection.FTP.3")
Ftp.Open "xxx.xxx.xxx.xxx", "username", "password"
Ftp.SetCurrentDirectory "DirectoryName/DirectoryName/DirectoryName"
What was the error?
Run-time error '-2147418113 (8000ffff)':
Method 'SetCurrentDirectory' of object 'IReflectionFTP' failed
More details:
Application: Excel Macro
Language : VB (VBA)
*Is this because of a coding error? *
Not likely. The macro has been long running and this came up for the first time.
*Is it because of a FTP service disruption? *
May be. But logs have a recording for every second and there seems to be no outage.
It seems to me there is a connection problem here - maybe a timeout? I assume that your three lines of code don't execute one after another (ie the SetCurrentDirectory is after some more code). This error will come up if the Ftp object doesn't have a valid connection that is logged in. Change the IP for the Open command to an invalid one and you'll see you get the same error.
Try setting the following line of code before SetCurrentDirectory command.
If FTP.Status = rcLoggedIn + rcConnected Then
Ftp.SetCurrentDirectory "DirectoryName/DirectoryName/DirectoryName"
Else
'Error handle
End If
Note, that you are late binding the object so for it to work for you, you'll need the If statement to be:
If FTP.Status = 17 Then
Also, if it is a timeout problem then I'd set the Timeout period for the session to be longer, ie FTP.TimeoutSession = 300.