I got following issue when starting mule server in windows 7.
I have set JAVA_HOME and MULE_HOME properly.
MULE_HOME is set to C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3.3.1 Running in console/foreground mode by default, use Ctrl-C to exit...
--> Wrapper Started as Console Launching a JVM... Unable to execute Java command. The system cannot find the file specified. (0x2)
"java" -Dmule.home="C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3.3.1"
-Dmule.base="C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3. :MaxPermSize=128m "-Djava.endorsed.dirs=C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3.3.1\lib\endorsed"
-Xmx512m -Djava.library.path="%LD_LIBRARY_P
3.3.1\mule-standalone-3.3.1/lib/boot" -classpath "%MULE_LIB%;C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3.3.1/conf;C:\BAM\Linux\fresh\mule-standal /commons-cli-1.2.jar;C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3.3.1/lib/boot/log4j-1.2.16.jar;C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-stan .3.1.jar;C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3.3.1/lib/boot/mule-module-logging-3.3.1.jar;C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-sta t-3.3.1.jar;C:\BAM\Linux\fresh\mule-standalone-3.3.1\mule-standalone-3.3.1/lib/boot/wrapper-3.2.3.jar"
-Dwrapper.key="IqO3S6Ox0DeEiEkH" -Dwrapper.port=32000 -Dw port.max=31999 -Dwrapper.pid=3224 -Dwrapper.version="3.2.3"
-Dwrapper.native_library="wrapper" -Dwrapper.cpu.timeout="10" -Dwrapper.jvmid=1 org.mule.module.rebo Critical error: wait for JVM process failed Press any key to continue . . .
Environment
OS - Windows 7 64 bit
JAVA - 1.7.0_10 64 bit
Can someone help me to fix this issue.
Thanks,
Kasun.
It looks like mule can't find the java executable. An easy way to address this is to edit the ${mule.home}/conf/wrapper.conf file and specify the whole path for the property wrapper.java.command, i.e:
wrapper.java.command=c:/java7/jre/bin/java
On a side note you shouldn't set the MULE_HOME env var anymore since mule will take care of setting it itself upon statup.
Is your %JAVA_HOME%\bin; set as Path variable
I had the same error. But in my case i had the MULE_HOME variable set to a wrong path. Once i deleted that variable, the error was resolved and the server started.
Related
I launch Oracle installer from the command line. The path is:
C:\Program Files\Java\jdk1.8.0_131\bin\java -jar fmw_12.2.1.3.0_wls.jar.
When the installation is complete сonfig.cmd is launching and this apprears in the command line:
Too long entering line. Unexpected appearance: :process_classpath. C:\Users\User\AppData\Local\Temp\OraInstall2017-12-26_12-32-05PM>
Who faced this and knows any solutions to bypass this?
I'm thinking it might be some privilege issue.
I had similar kind of issue , so I started the installation in admin mode
Instead running from direct java bin path , try to set class path in environment variable then try.
Here is the related error its showing:
java.exe is not a recognized file as an internal or external command,
operable or external command
errorlevel=9009
i was getting the same error on WIndows 8.1(64 bit) and checked java path but it was ok
so i just run my jmeter.bat with Run as Administrator and it worked for me
Many operating systems have an environment variable such as PATH that contains a list of directories (or folders) to be searched when looking for a command to execute. Commands that can be found via the PATH are commonly called external commands. The program that reads the command line or the batch file and invoked the commands may have a number of built in commands, these are commonly called internal commands.
I suggest you examine the PATH (or equivalent) set when your java command executes from the command line and also when execution is attempted from the batch file. Compare the two and make sure the directory containing your java.exe is in the PATH.
Does not work with Java 9 beta:
Running:
C:\java -version
Gives:
java version "9-ea"
Just go into command line and run:
java -jar ApacheJMeter.jar
Set the correct Java Path (installed in your system) in Computer -> Advanced System settings -> Environment Variables -> Ok -> System Variables -> Path
I got the same issue and resolved by following the above steps.
I tried everything, this eventually worked.
Within System Variables:
PATH = "C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jdk1.8.0_101\bin"
May help someone.
This error occurs due to the path has not been set properly.
Either you can set it in environmental varialables or right click jmeter .bat file,choose edit set the path their,for reference see the jmeter.apache.org user manuals.
For me, my Java path has a space in it and jmeter said it can't find Java
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home
.. I looked at the jmeter.sh script and saw it got the path from "Plugin-Ins" .. onward. I tried just commenting out the exit command after that check in the script .. and then I was able to run jmeter.
So apparently the validation logic has a bug, where the error message about can't find java is in fact not true (if Java is indeed set up correctly), so it can be ignored.
For windows 8.1 Users:
Error when trying to run jmeter.bat
Error message:
Not able to find Java executable or version. Please check your Java installation. errorlevel=2
Press any Key to continue
Resolution:
Right Click jmeter.bat and Run as Administrator.
This worked for me, hope this helps. Good luck
Set the correct JM_LAUNCH variable to java.exe
For Windows XP users set Java environment by following the steps here:
http://www.tutorialspoint.com/jmeter/jmeter_environment.htm
Note the path depends on your installed JDK.
And download the file from:
https://svn.apache.org/repos/asf/jmeter/trunk/bin/jmeter.bat
Then replace your jmeter.bat with the downloaded file.
If you have installed Java and still you get this error, please set the java_home path to below using typing below command in terminal:
export JAVA_HOME="/Library/InternetPlugIns/JavaAppletPlugin.plugin/Contents/Home"
Since I run many versions of Java.. I modified jmeter.bat.
rem JM_START - set this to "start" to launch JMeter in a separate window
rem this is used by the jmeterw.cmd script.
rem
rem =====================================================
setlocal
rem Minimal version to run JMeter
set MINIMAL_VERSION=1.8.0
set PATH=%PATH%;C:\Program Files (x86)\IBM\Java80\jre\bin <<< add This line to jmeter.bat
Copied the JAVA executable from Installed version of Java from C:\Program FilesJava\jdk1.8.0_191\bin and pasted in the folder where the jmeter bat resides and it worked for me.
Not exactly the same issue but somebody might find it helpful
Do not double click jmeter.bat but instead ApacheJMeter.jar in the same directory
For me jmeter.bat run but for a brief moment closing almost immediately and not prompting any error. Above workaround allowed me to start working
if JAVA -version shows as blank or empty in the command prompt (CMD) then you need to clear the all java paths in environment variable and again add JAVA_HOME=C:\Program Files\Java\jdk-11.0.15.1
path= C:\Program Files\Java\jdk-11.0.15.1\bin;
if you see C:\Program Files\Common Files\Oracle\Java\javapath; like this remove this
and try in new CMD prompt then Java -version will work.
i know this can be very simple but i am not able to do so.
I am trying to start integrated weblogic server in jdeveloper(v11.1.1.7.0). But it always says the following error :
*** Using port 7101 ***
C:\Users\595452\AppData\Roaming\JDeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
The system cannot find the path specified.
The JRE was not found in directory C:\Oracle\MIDDLE~1\jdk160_29. (JAVA_HOME)
Please edit your environment and set the JAVA_HOME
variable to point to the root directory of your Java installation.
Press any key to continue . . . [Server Instance IntegratedWebLogicServer is shutting down. All applications currently running will be terminated and undeployed.]
My Java_home is set to the jdk i have installed and also have an entry in PATH of system variable.
**User variable:**
C:\Program Files\Java\jdk1.7.0_45;C:\Program Files\Java\jre7
**System Variable :**
C:\Program Files\Java\jdk1.7.0_45\bin;C:\Program Files\Java\jre7\bin
Please assist me in this regard.
I fixed mine by editing the setDomainEnv.cmd in my weblogic installation.
In my installation D:\srv\wls12120\user_projects\domains\mydomain\bin my installation pointed to:
set SUN_JAVA_HOME=D:\Java\jdk\jdk8u40 changed to
set DEFAULT_SUN_JAVA_HOME=C:\PROGRA~1\Java\JDK17~1.0_2
set DEFAULT_SUN_JAVA_HOME=D:\Java\jdk\jdk8u40 changed to
set JAVA_HOME=C:\PROGRA~1\Java\JDK17~1.0_2
as well as here:
if "%VM_TYPE%"=="JRockit" (
set JAVA_HOME=%BEA_JAVA_HOME%
) else (
if "%JAVA_VENDOR%"=="Sun" (
set JAVA_HOME=%SUN_JAVA_HOME%
) else (
set JAVA_VENDOR=Oracle
set JAVA_HOME=D:\Java\jdk\jdk8u40
set VM_TYPE=HotSpot
)
)
This has solved my issue.
Apparently the install routine thinks that your JAVA_HOME is set to the wrong jre. First test is to open a command shell and type in "java -version"
Verify that you see Java 1.7.0 and not 1.6.0
One this had been checked check the ide.conf file or jdev.conf file which java version is configured there. There you should see jdk 1.7.0 configured.
Then you remove the DefaultDomain folder out of the system 11.1.1.x.x.x folder.
Then start jdev again and try to start the integrated server again.
Solution: Windows 7
Delete the C:\Users\\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36 folder and then restart your JDeveloper.
Delete the C:\Users\"username"\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36 folder and then restart your JDeveloper
While upgrading Java version, remove all the files available in the below path
C:\Users\\AppData\Roaming\JDeveloper
Every time I try to run a weblogic webcenter application on Jdev I get the following error and I cant find any reference on how to fix this anywhere on the web.
starting weblogic with Java version: Could not create the Java virtual
machine. Unrecognized option: -jrockit
Try modifying the startWebLogic.cmd file (WIN7)
c:\users\{user}\AppData\Roaming\JDeveloper\system{version}\DefaultDomain\bin\startWebLogic.cmd
to contain
set JAVA_VM=-server
set MEM_ARGS=-Xms512m -Xmx1024m -XX:MaxPermSize=512m
Jdeveloper 11g do not support jdk 1.7
https://forums.oracle.com/thread/2482850
I fixed it by add to top of c:\users{user}\AppData\Roaming\JDeveloper\system{version}\DefaultDomain\bin\setDomainEnv.cmd:
set SUN_JAVA_HOME=E:\Oracle\Java\jdk1.6.0_37
set JAVA_VENDOR=Sun
In OSX, look for the this folder /Users/{USERNAME}/.jdeveloper/system{VERSION}/DefaultDomain/bin
Edit the file setDomainEnv.sh and look for SUN_JAVA_HOME and make sure the value is the same value as your JAVA_HOME, i.e. /Library/Java/JavaVirtualMachines/jdk${JDK_VERSION}.jdk/Contents/Home, by default it seems it is set to an empty string "".
Edit the file startWebLogic.sh and add the following before setDomainEnv.sh is called.
JAVA_VENDOR=Sun
You can test it out by running sh ./startWebLogic.sh, if it runs with -jrockit error, then all is good :)
I've also tested with Java JDK 1.7 and it seems to work.
The reason is, that older Weblogic Versions use the Java VM "JRockit"
http://www.oracle.com/technetwork/middleware/jrockit/overview/index.html
The JRockit VM is no longer supported in Java 7 or higher.
All of the other solutions here seem to be hacks and none of them helped me.
I had the same Problem with a Weblogic 10.3.5 and I found out, the installation was incorrect.
The Problem is, that there is no java version check in the installer, so if you don't know that you can't use Java 7 or higher you are screwed.
These steps fixed it for me:
You need to make sure you have Java 6 or lower installed.
Reinstall the Weblogic and make sure to specify the correct JDK
I downloaded Tomcat 6 from Tomcat Website and try to install. I found the .exe file in C:\apache-tomcat-6.0.35\bin but when i run the exe file the command prompt disappeared after show "The system cannot find the file specified". I already installed JDK 6 update 29 in my system. Please advice
I had a simmilar problem after installing a java update, but JAVA_HOME was set correctly. If you run tomcat as a service, you might have to right click on the tomcat icon and open java tab and change java virtual machine path or just set "use default".
If I were to "guess" I would say that the JAVA_HOME is not set. But to confirm :
Can you go the command line, make sure that JAVA_HOME is set correctly, startup tomcat (from command line) ? If you run into errors, please send the text output.
Try to run "startup.bat" to start a tomcat instance.
Go to your/path/tomcat and execute script catalina_start.bat .I had the same issue and this worked for me (though I installed Tomcat as a part of XAMPP package)