I've trying to create subdomain in my local xampp installation for some time.
I tried editing my httpd.conf file and I entered the following:
NameVirtualHost *:80
<VirtualHost *:80>
DocumentRoot /ecommerce
ServerName ecomm.localhost
</VirtualHost>
I also edited my windows hosts file and entered:
127.0.0.1 ecomm.localhost
But when I type 'ecomm.localhost' in my firefox it gives me:
Access forbidden!!!
Can please anybody help me out? What exactly I'm doing wrong? I'm fairly new to this.
I simply want to create multiple folders in my 'htdocs' folder and use them as different websites with subdomain. For example:
c:\xampp\htdocs\mainSite -----> mainSite.com or mainSite.localhost
c:\xampp\htdocs\subSite -----> subSite.mainSite.com or subSite.mainSite.localhost
Try this :
NameVirtualHost 127.0.0.1:80
<VirtualHost *:80>
<Directory "C:\path\to\ecommerce">
Options FollowSymLinks Indexes
AllowOverride All
Order deny,allow
allow from All
</Directory>
ServerName ecomm.localhost
ServerAlias www.ecomm.localhost
DocumentRoot "C:\path\to\ecommerce"
</VirtualHost>
Yes you edited your hosts file correctly.
In addition to atabak's answer:
Go to Apache > Conf > Extra -> "httpd-vhosts.conf" file and add:
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/subdomain"
ServerName subdomain.localhost.com
</VirtualHost>
Go to C:\WINDOWS\system32\drivers\etc -> "hosts" file and add:
127.0.0.1 subdomain.localhost
from Setting Up Multiple Subdomains Using Xampp
/
In xampp\apache\conf\extra\httpd-vhosts.conf file add these line at the bottom of the file for subdomain support :
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/sandbox"
ServerName sandbox.localhost.com
</VirtualHost>
Then in C:\windows\System32\drivers\etc\hosts file add these line at the bottom of the file :
127.0.0.1 sandbox.localhost.com
After that re-start the xampp server and open a new tab, write in the address bar
sandbox.localhost.com
Then you will see the output of index.php file which was in the sandbox folder
This worked for me. Paste at the bottom of the httpd-vhost.conf file at xampp > Apache > Conf > Extra. Make sure not to comment any vitualhost tag you're adding or you get "Attempting to start Apache" error when you restart server.. foodporch is the name of my subdomain
<VirtualHost *:80>
DocumentRoot "c:/xampp/htdocs"
ServerName localhost
<Directory "c:/xampp/htdocs">
Require all granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "c:/xampp/htdocs/foodporch"
ServerName foodporch.localhost
<Directory "c:/xampp/htdocs/foodporch">
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
Remember to add this line to end of host file at C:\WINDOWS\system32\drivers\etc ->
127.0.0.1 foodporch.localhost.com
in httpd.xampp.conf file add this line for subdomain support :
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/subdomain"
ServerName subdomain.localhost.com
</VirtualHost>
then add :
windows hosts file and entered: 127.0.0.1 subdomain.localhost
work for me
To improve on this answer for windows folks.
To enable actual saving of hosts file in windows:
C:\WINDOWS\system32\drivers\etc -> 127.0.0.1 subdomain.localhost.com
you must first open notepad as administrator or else
windows wont save the hosts file because system files require administrative
permission.
So first on start menu, find notepad, Right click on the icon.
Choose Run as administrator. Then open the hosts file. This will allow you to update the hosts file without adding any extensions.
Related
I'm attempting to configure simpleSAMLphp within a MAMP/Apache environment on Windows 10 and below is my httpd-vhosts.conf file:
<VirtualHost *:80>
ServerName localhost
DocumentRoot C:/MAMP/htdocs
</VirtualHost>
<VirtualHost *:80>
ServerName simplesamlphp
DocumentRoot C:/MAMP/htdocs/pro-dashboard
Alias /simplesaml C:/MAMP/simplesamlphp/www
<Directory C:/MAMP/simplesamlphp/www>
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
And here is my /etc/hosts file:
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
# Virtual Hosts
127.0.0.1 simplesamlphp
Apache starts via MAMP totally fine without including this httpd-vhosts.conf file in my httpd.conf file, but as soon as its included, Apache will not start so the issue appears to be with httpd-vhosts.conf. No errors are shown in the apache_error.log file. My Apache version is 2.2 so I believe my Directory directives in my second VirtualHost are correct.
I've tried double quoting the DocumentRoot's, directory paths etc, and also tried backslashes over forward slashes. I spent most of yesterday trying to figure this out while scouring the web but nothing I found has made this work.
Any help is much appreciated!
Try this modified config
The path in Directory header same as DocumentRoot!
<VirtualHost *:80>
ServerName localhost
DocumentRoot C:/MAMP/htdocs
</VirtualHost>
<VirtualHost *:80>
ServerName simplesamlphp
DocumentRoot C:/MAMP/htdocs/pro-dashboard
Alias /simplesaml C:/MAMP/simplesamlphp/www
<Directory C:/MAMP/htdocs/pro-dashboard>
Order allow,deny
Allow from all
AllowOverride All
</Directory>
</VirtualHost>
So oddly enough, taking out what I had in httpd-vhosts.conf and simply putting it in my httpd.conf file makes Apache start back up.
<VirtualHost *:80>
DocumentRoot "C:/Program Files (x86)/Ampps/www"
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/Program Files (x86)/Ampps/www/proj"
ServerName proj.local
</VirtualHost>
How do I bind a specific "domain" (virtual host domain) to one location? Above points proj.local to localhost as well.
As you said you are using AMPPS, I suppose you are adding this instructions to the folder:
AMPPS/apache/conf/extra/httpd-vhosts.conf
With that in mind I'll show an example of configuration.
<VirtualHost project.local:80>
<Directory "/Users/you/yourproject">
Options FollowSymLinks Indexes
AllowOverride All
Order deny,allow
allow from All
</Directory>
ServerName project.local
ServerAlias project.local 127.0.0.1
ScriptAlias /cgi-bin/ "/Users/you/yourproject/cgi-bin/"
DocumentRoot "/Users/you/yourproject"
ErrorLog "/Applications/AMPPS/apache/logs/project.error_log"
CustomLog "/Applications/AMPPS/apache/logs/project.access.log" combined
</VirtualHost>
All right. After doing that, you will have to add to your hosts file. In Mac they are located in:
/etc/hosts
If you are using a Windows environment you will find the hosts file in:
c:\windows\system32\drivers\etc\hosts
Attention: You may have to type your password again or allow the program you're using to edit the file to use administrator privileges.
Then you'll add your local IP and the hostname to it. Just like this:
127.0.0.1 project.local
If you don't add the URL to the hosts file that won't work.
Have you tried with <VirtualHOst proj.local:80>? You should be able to find more examples here: http://httpd.apache.org/docs/2.2/vhosts/examples.html
<VirtualHost 127.0.0.1:80>
DocumentRoot "C:\xampp\htdocs"
ServerName xampp.local
ServerAlias www.xampp.local
</VirtualHost>
after adding it at the end of your httpd-vhosts.conf file restart your xampp and also add following lines to your hosts file available at C:\Windows\System32\Drivers\etc\hosts
127.0.0.1 xampp.local
I'm working with XAMPP on Mac OS X.
I'm trying to run a Symfony website properly for a client, and I really don't know Symfony (yet). I just want to install and launch it.
I've changed my /etc/hosts file this way:
127.0.0.1 www.mysite.local
And the httpd.conf file this way:
<VirtualHost *:80>
ServerName www.mysite.local
DocumentRoot /Applications/MAMP/htdocs/mysite/web
DirectoryIndex index.php
<Directory /Applications/MAMP/htdocs/mysite/web>
AllowOverride All
Allow from All
</Directory>
Alias /sf /Applications/MAMP/htdocs/mysite/lib/vendor/symfony/data/web/sf
<Directory "/Applications/MAMP/htdocs/mysite/lib/vendor/symfony/data/web/sf">
AllowOverride All
Allow from All
</Directory>
</VirtualHost>
Now, the site is working (yay!), but I can't access any more any of my other local sites because localhost is rendered as www.mysite.local.
Where am I wrong?
This worked for me!
To run projects like http://localhost/projectName:
<VirtualHost localhost:80>
ServerAdmin localhost
DocumentRoot path/to/htdocs/
ServerName localhost
</VirtualHost>
To run projects like http://somewebsite.com locally:
<VirtualHost somewebsite.com:80>
ServerAdmin webmaster#example.com
DocumentRoot /path/to/htdocs/somewebsiteFolder
ServerName www.somewebsite.com
ServerAlias somewebsite.com
</VirtualHost>
The same for other websites:
<VirtualHost anothersite.local:80>
ServerAdmin webmaster#example.com
DocumentRoot /path/to/htdocs/anotherSiteFolder
ServerName www.anothersite.local
ServerAlias anothersite.com
</VirtualHost>
localhost will always redirect to 127.0.0.1. You can trick this by naming your other VirtualHost to other local loop-back address, such as 127.0.0.2. Make sure you also change the corresponding hosts file to implement this.
For example, my httpd-vhosts.conf looks like this:
<VirtualHost 127.0.0.2:80>
DocumentRoot "D:/6. App Data/XAMPP Shared/htdocs/intranet"
ServerName intranet.dev
ServerAlias www.intranet.dev
ErrorLog "logs/intranet.dev-error.log"
CustomLog "logs/intranet.dec-access.log" combined
<Directory "D:/6. App Data/XAMPP Shared/htdocs/intranet">
Options Indexes FollowSymLinks ExecCGI Includes
Order allow,deny
Allow from all
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
(Notice that in <VirtualHost> section I typed 127.0.0.2:80. It means that this block of VirtualHost will only affects requests to IP address 127.0.0.2 port 80, which is the default port for HTTP.
To route the name intranet.dev properly, my hosts entry line is like this:
127.0.0.2 intranet.dev
This way, it will prevent you from creating another VirtualHost block for localhost, which is unnecessary.
This is normal if you see it. Since it is the first virtual host entry, it will show local host.
Let’s say for example you didn't want that page to show. All you want to show is the "Apache, it works" page, so you would make a vhost entry before mysite.local as local host and point it to the "it works" page.
But this is normal. I had this problem before, so don't worry!
You may want to use this:
<VirtualHost *:80>
DocumentRoot "somepath\Apache2.2\htdocs"
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
as your first virtual host (place it before other virtual hosts).
I had the same issue of accessing localhost while working with virtualHost. I resolved it by adding the name in the virtualHost listen code like below:
In my hosts file, I have added the below code (C:\Windows\System32\drivers\etc\hosts) -
127.0.0.1 main_live
And in my httpd.conf I have added the below code:
<VirtualHost main_live:80>
DocumentRoot H:/wamp/www/raj/main_live/
ServerName main_live
</VirtualHost>
That's it. It works, and I can use both localhost, phpmyadmin, as well as main_live (my virtual project) simultaneously.
Additional description for John Smith's answer from the official documentation. To understand why it is.
Main host goes away
If you are adding virtual hosts to an existing web server, you must
also create a block for the existing host. The
ServerName and DocumentRoot included in this virtual host should be
the same as the global ServerName and DocumentRoot. List this virtual
host first in the configuration file so that it will act as the
default host.
For example, to work properly with XAMPP, to prevent VirtualHost overriding the main host, add the follow lines into file httpd-vhosts.conf:
# Main host
<VirtualHost *:80>
ServerName localhost
DocumentRoot "/xampp/htdocs"
</VirtualHost>
# Additional host
<VirtualHost *:80>
# Over directives there
</VirtualHost>
For someone doing everything described here and still can't access:
XAMPP with Apache 2.4:
In file httpd-vhost.conf:
<VirtualHost *>
DocumentRoot "D:/xampp/htdocs/dir"
ServerName something.dev
<Directory "D:/xampp/htdocs/dir">
Require all granted #apache v 2.4.4 uses just this
</Directory>
</VirtualHost>
There isn't any need for a port, or an IP address here. Apache configures it on its own files. There isn't any need for NameVirtualHost *:80; it's deprecated. You can use it, but it doesn't make any difference.
Then to edit hosts, you must run Notepad as administrator (described below). If you were editing the file without doing this, you are editing a pseudo file, not the original (yes, it saves, etc., but it's not the real file)
In Windows:
Find the Notepad icon, right click, run as administrator, open file, go to C:/WINDOWS/system32/driver/etc/hosts, check "See all files", and open hosts.
If you were editing it before, probably you will see it's not the file you were previously editing when not running as administrator.
Then to check if Apache is reading your httpd-vhost.conf, go to folder xampFolder/apache/bin, Shift + right click, open a terminal command here, open XAMPP (as you usually do), start Apache, and then on the command line, type httpd -S. You will see a list of the virtual hosts. Just check if your something.dev is there.
According to this documentation: Name-based Virtual Host Support
You may be missing the following directive:
NameVirtualHost *:80
Just change <VirtualHost *:80> to <VirtualHost 127.0.0.1:80>.
Then the default DocumentRoot will serve for all domains or IP addresses that point to your server and specified VirtualHost will work.
It may be because your web folder (as mentioned "/Applications/MAMP/htdocs/mysite/web") is empty.
My suggestion is first to make your project and then work on making the virtual host.
I went with a similar situation. I was using an empty folder in the DocumentRoot in httpd-vhosts.confiz and I couldn't access my shahg101.com site.
I am running Ubuntu 16.04 (Xenial Xerus). This is what worked for me:
Open up a terminal and cd to /etc/apache2/sites-available. There
you will find a file called 000-default.conf.
Copy that file: cp 000-default.conf example.local.conf
Open that new file (I use Nano; use what you are comfortable with).
You will see a lot of commented lines, which you can delete.
Change <VirtualHost *:80> to <VirtualHost example.local:80>
Change the document root to reflect the location of your files.
Add the following line: ServerName example.local And if you need to, add this line: ServerAlias www.example.local
Save the file and restart Apache: service Apache2 restart
Open a browser and navigate to example.local. You should see your website.
For anyone using Windows and the Bitnami WAMP Stack Manager Tool this virtual host configuration should go into Bitnami\apache2\conf\bitnami\bitnami.conf
Note: Some settings in Directory section is not a must.
For example, my virtual host configuration for site.com would be as follows:
<VirtualHost site.com:80>
DocumentRoot "C:/Bitnami/apache2/htdocs/site/docroot"
<Directory "C:/Bitnami/apache2/htdocs/site/docroot">
Options Indexes FollowSymLinks
AllowOverride All
<IfVersion < 2.3 >
Order allow,deny
Allow from all
</IfVersion>
<IfVersion >= 2.3 >
Require all granted
</IfVersion>
</Directory>
</VirtualHost>
Remember that configuration for vhost as mentioned, by other friends, sagits's answer is needed.
I have problem with creating virtual host. I am using Windows 7 x64 Professional. In file C:\Windows\System32\drivers\etc\hosts I have only this lines:
127.0.0.1 myhost
127.0.0.1 www.myhost
And in file C:\xampp\apache\conf\extra\httpd-vhosts.conf I have this:
NameVirtualHost *:80
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/"
ServerName localhost
ServerAlias www.localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/Users/Me/Dropbox/Project/public"
ServerName myhost
ServerAlias www.myhost
<Directory "C:/Users/Me/Dropbox/Project/public">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
And of course I have restared my Apache server after adding this lines in those files.
Unfortunatly typing myhost or www.myhost in my browser redirect me to the myhost/xampp.
I have already search and I have found on google and also on stackoverflow description how to configure virtual hosts using xampp but how can I recognize I have done everything alright. I know that my problem isn't new but I didn't found working solution for me.
I have also recognized that typing localhost in my browser redirect me alsto localhost/xampp. I don't know whether these problems are linked in my case.
I had this same issue. Your first request is redirecting to the htdocs root directory. If you look at index.php in the htdocs directory, you can see very brief code that takes the incoming request and redirects it to the xampp directory.
I fixed it by fiddling with the httpd-vhosts.conf file. In your case, try making the following edits:
NameVirtualHost 127.0.0.1
<VirtualHost 127.0.0.1>
DocumentRoot "C:\xampp\htdocs\
ServerName localhost
</VirtualHost>
<VirtualHost www.myhost>
DocumentRoot "C:\Users\Me\Dropbox\Project\public"
ServerName www.myhost
ServerAlias www.myhost
<Directory "C:\Users\Me\Dropbox\Project\public">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
I had a similar issue and found that I had to go to my Apache24 main httpd.conf file and uncomment around line 501 "Include conf/extra/httpd-vhost.conf"
I had never used that before and it was still #'ed out. Hope this helped anyone not finding other answers here. My Apache24 can now see my vhost file.
You need to enable name-based virtual hosting.
Near the top of the file in C:\xampp\apache\conf\extra\httpd-vhosts
uncomment #NameVirtualHost *:80
i.e. from:
#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80
To:
#
# Use name-based virtual hosting.
#
NameVirtualHost *:80
(Note the last line now is uncommented).
Worked like a charm for me. :)
try this
[ file : C:\xampp\apache\conf\extra\httpd-vhosts.conf ]
<VirtualHost basic.test:80>
DocumentRoot "C:/xampp/htdocs/basic/public/"
ServerName basic.test
</VirtualHost>
[ file : C:\Windows\System32\drivers\etc\hosts ]
(open as admin)
127.0.0.1 basic.test
127.0.0.1 localhost
For me replacing this one <VirtualHost *:80> to this <VirtualHost 127.0.0.1:80> working fine.
I have installed WAMP version 2.1 on my windows 7 machine. When i browse to localhost in my browser, the WAMP server page is visible.
But when I browse to my IP in my browser, I get the message
403 Forbidden: You don't have permission to access / on this server.
Any suggestions?
The access to your Apache server is forbidden from addresses other than 127.0.0.1 in httpd.conf (Apache's config file) :
<Directory "c:/wamp/www/">
Options Indexes FollowSymLinks
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
</Directory>
The same goes for your PHPMyAdmin access, the config file is phpmyadmin.conf :
<Directory "c:/wamp/apps/phpmyadmin3.4.5/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
</Directory>
You can set them to allow connections from all IP addresses like follows :
AllowOverride All
Order allow,deny
Allow from all
I found a simpler fix...
Although the icon was green WAMP still needs to be "Put Online" (last item of menu when left-clicking icon).
After that I had access as normal.
For me the inclusion of "Require local" helped to solve Error 403. The alias config file looks like this:
Alias /mytest/ "C:/mytest/"
<Directory "C:/mytest/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order allow,deny
Allow from all
Require local
</Directory>
The solution for changing the permissions in the httpd.conf will work if you are OK with providing access to the WAMP server from outside.
If you do not want to do that then all you have to do is tell windows that the "localhost" domain points to 127.0.0.1. You can do that by editing the hosts file in your system directory.
The file is placed at : C:\Windows\System32\drivers\etc\hosts
by default windows 7 ships with :
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
You have to un-comment the mapping for localhost:
# localhost name resolution is handled within DNS itself.
127.0.0.1 localhost
# ::1 localhost
Note: you will not be able to edit the hosts file as its a read-only file. To edit, you have to be the administrator, copy the file to some other location, edit it and then copy it back to the etc directory.
I do not recommend the change of the hosts file. Use the permissions of httpd.conf file. use the hosts file approach only if you do not want the server accessed from outside.
Try adding the following lines of code to the file httpd-vhosts.conf:
<VirtualHost *:80>
ServerAdmin serveradmin#host.com
DocumentRoot "C:\wamp\www"
ServerName localhost
</VirtualHost>
Another thing I found out is that if your network adapter uses IPV6, it will not show as 127.0.0.1 but ::1
What I ended up doing is this:
<Directory "c:/wamp/www/">
Options Indexes FollowSymLinks
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Allow from ::1
</Directory>
The same goes for your PHPMyAdmin access, the config file is phpmyadmin.conf :
<Directory "c:/wamp/apps/phpmyadmin3.4.5/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Allow from ::1
</Directory>
For Wamp 3.1.3 and Apache 2.4 I simply had to change 1 line in my httpd-vhosts.conf file.
Open httpd-vhosts.conf
Change "Require local" to "Require all granted"
Restart all services
I was then able to get to my apache server from other computers.
Give credit to this video: https://www.youtube.com/watch?v=Sy_f6wBGnjI
if you have used localhost/phpmyadmin/
simply use
127.0.0.1/phpmyadmin/ for PHPMyAdmin
127.0.0.1/sqlbuddy/ for SQLBuddy
or if you have used localhost:8080/phpmyadmin/ then
127.0.0.1:8080/phpmyadmin/ for PHPMyAdmin
127.0.0.1:8080/sqlbuddy/ for SQLBuddy
Remember to remove dummy elements in httpd-vhosts.conf
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host.example.com
DocumentRoot "c:/Apache24/docs/dummy-host.example.com"
ServerName dummy-host.example.com
ServerAlias www.dummy-host.example.com
ErrorLog "logs/dummy-host.example.com-error.log"
CustomLog "logs/dummy-host.example.com-access.log" common
</VirtualHost>
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host2.example.com
DocumentRoot "c:/Apache24/docs/dummy-host2.example.com"
ServerName dummy-host2.example.com
ErrorLog "logs/dummy-host2.example.com-error.log"
CustomLog "logs/dummy-host2.example.com-access.log" common
</VirtualHost>
For Apache version 2.4.x simply replace Require local with Require all granted in httpd.conf file inside <Directory "c:/wamp/www/"> tag then Restart all services
There could many causes to this problems
What I have experienced are:
1) 127.0.0.1 localhost entry was duplicated in hosts file
2) Apache mod_rewrite was not enabled
Regardless of the cause, backing up your www folder, vhost configuration file (and httpd configuration file) will help.
And such process takes a few minutes.
Good luck
I read & tried All Fixes But Not one worked. At last i Found that the Wamp Server Logo Is Green But Need to Be "PUT ONLINE".
So simple & a Quick Fix After Checking Your PHPMyAdmin.Cofg & HttPD.cofg Just Click on PUT ONLINE
I tried the configs above and only this worked for my WAMP Apache 2.4.2 config. For multiple root site without named domains in your Windows hosts file, use http://locahost:8080, http://localhost:8081, http://localhost:8082 and this configuration:
#ServerName localhost:80
ServerName localhost
Listen 8080
Listen 8081
Listen 8082
#.....
<VirtualHost *:8080>
DocumentRoot "c:\www"
ServerName localhost
<Directory "c:/www/">
Options Indexes FollowSymLinks
AllowOverride all
Require local
</Directory>
</VirtualHost>
<VirtualHost *:8081>
DocumentRoot "C:\www\directory abc\svn_abc\trunk\httpdocs"
ServerName localhost
<Directory "C:\www\directory abc\svn_abc\trunk\httpdocs">
Options Indexes FollowSymLinks
AllowOverride all
Require local
</Directory>
</VirtualHost>
#<VirtualHost *:8082></VirtualHost>.......
I faced this issue with wamp on windows 7. Adding following code to httpd-vhosts.conf solved the issue for me.
<VirtualHost *:80>
DocumentRoot "F:/wamp_server/www/"
ServerName localhost
</VirtualHost>
Thanks for your question.
I'am using wamp 3 now.
And I find an simple answer to do this under your question.
But that answer should change a little on wamp 3.
The steps are as following:
Right click wamp icon
Choose Wamp Setting
Click the Menu item:online/offline
Left click wamp icon
You will find there is a new item called "Put online"
It took me forever to figure this out.
C:\wamp\bin\apache\apache2.4.9\conf\extra\httpd-vhosts.conf
In this file you will notice several example virtual host files, that look like:
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host.example.com
DocumentRoot "c:/Apache24/docs/dummy-host.example.com"
ServerName dummy-host.example.com
ServerAlias www.dummy-host.example.com
ErrorLog "logs/dummy-host.example.com-error.log"
CustomLog "logs/dummy-host.example.com-access.log" common
</VirtualHost>
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host2.example.com
DocumentRoot "c:/Apache24/docs/dummy-host2.example.com"
ServerName dummy-host2.example.com
ErrorLog "logs/dummy-host2.example.com-error.log"
CustomLog "logs/dummy-host2.example.com-access.log" common
</VirtualHost>
Simply delete these entries and replace with:
<VirtualHost *:80>
ServerAdmin serveradmin#host.com
DocumentRoot "C:\wamp\www"
ServerName localhost
</VirtualHost>
You definitely need to make sure your other ducks are in a row but this for me with the solution that worked.
hi there are 2 solutions :
change the port 80 to 81 in the text file (httpd.conf)
and click 127.0.0.1:81
change setting the network
go to control panel--network and internet--network and sharing center
click-->local area connection
select-->propertis
check true in the -allow other .....
and --- allo other .....
I had this problem too. The route of my problem was I had made a mistake in my vhosts.conf file. If you are using vhosts this is another thing to check
This configuration in httpd.conf work fine for me.
<Directory "c:/wamp/www/">
Options Indexes FollowSymLinks
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1 ::1
</Directory>
Make sure you aren't using a Windows' directory separator character (backslash) in your path names in your .conf file, even if you are on Windows. Apache doesn't understand them but will still start up and then output a 403 Forbidden Message.
wrong:
<Directory "c:\websites\my-website\">
right:
<Directory "c:/websites/my-website/">
Surprisingly, square brackets in DocumentRoot (and related, like <Directory>) paths can also cause error 403:
DocumentRoot "P:/TRY/web/fatfree/from_github/fatfree-master[bang]" failed with 403, while
DocumentRoot "P:/TRY/web/fatfree/from_github/fatfree-master" worked fine.
(I didn't bother figuring out the Apache path escaping, if any, just renamed the path instead. If anyone knows, comments are welcome.)
My solution was to disable encoding for encoded files (these files are green in windows). Ive got these files from MAC computer and it was encrypted by default.
Ive select these files > right click > properities > general tab > andvanced > uncheck encrypt files...
And voila it works.
I have tried all the stuff except clearing the mess in .htaccess file.
Go to www/ directory and make a copy of .htaccess file in another folder. Then clear all the lines in .htaccess original file.
And add this line,
RewriteEngine On
Then restart the server.
This has solved my problem and got access to all my localhost sites.
Hope it would solve yours too.
Also on Apache 2,4 you may need to add this to the directory directive in conf,
in case you decided to include httpd-vhosts.conf.
By default you can install wamp in C:\ but still choose to deploy your web development in another location.
To do this inside the vhosts.conf you can add this directive:
<Directory "e:/websites">
Options Indexes FollowSymLinks MultiViews
DirectoryIndex index.php
AllowOverride All
<IfDefine APACHE24>
Require local
</IfDefine>
<IfDefine !APACHE24>
Order Deny,Allow
Allow from all
Allow from localhost ::1 127.0.0.1
</IfDefine>
</Directory>
make sure that, the name of the file in the directory c:/wamp/apps/phpmyadmin3.1.3.1/, match the name (or version) in the phpMyAdmin.conf (Alias /phpmyadmin "c:/wamp/apps/phpmyadmin3.1.3.1/" )
I have found that if you are using ammps that for some reason its always forbidden when its in your root folder so i put it in the directory above my root folder and made a alias in the httpd.conf using this
Alias /phpmyadmin "C:/Program Files (x86)/Ampps/phpMyAdmin"
please note i am using ammps and i dont know for sure if it will work for others but its worth a try ;)