I have set up the SharePoint 2010 with windows7 by following the steps given here.
I am trying to give the antonymous access to the default site (80 port). followed here.
as i went to step 8, i found the Anonymous Access option for the site is disabled. I logged in with administrator. as usual there should be permissible for administrator. Why should this is happening?
Also Can I make Central admin to anonymous access?
try this might be helpful to you :
In Central Administration -> select your web application -> than in Ribbon tab you can see User Policy tab click on it and add your site administrator with full control. than check it.
Let me know if it helps
Related
I want to install a TeamCity BuildAgend as a user. When entering my user credentials here:
I always get this error:
NOTE: My account (user) is Administrator with full permission!
How can I do this?
The error message says it does not have "enough rights to run as a service",
this is slightly different from just being an administrator.
Go to Control Panel> Administrative Tools> Local Security Policy.
Select Local Policies> User Rights Assignment.
Scroll down through the list of policies and look for Log on as a service.
Add the account you're using to the list of accounts with this right.
That should in theory be all you need to allow the service to run under that user.
The best powershell command that I have found for this is:
Grant-Privilege -Identity $SERVICE_USERNAME -Privilege SeServiceLogonRight
Requires use of the Carbon framework.
I'm a Windows 10 Home user and the steps above did not work for me, but the following did:
Enable gpedit.msc by running the batch file as explained here under Method 1: https://www.askvg.com/how-to-enable-group-policy-editor-gpedit-msc-in-windows-7-home-premium-home-basic-and-starter-editions/
Run gpedit.msc
Go to Local Computer Policy / Computer Configuration / Windows Settings / Security Settings / Local Policies / User Rights Assignment
Double-click Log on as a service
On the window that appears, click Add User or Group...
Enter your username and click the Check Names button
Your name will be modified, adding the machine name as the prefix. Click OK
Click OK on the Log on as a service Properties window to apply the change.
It is a little bit of a pain, but after doing that, I was able to continue installing TeamCity
When creating a new MVC app and clicking "change authentication".
After choosing "multiple organisations" clicking finish and logging in with my Microsoft account (the one used for Azure) I receive the following error:
User credential verification failed.
Error: Value cannot be null.
Parameter name: entity
Any ideas?
The error is very generic so has proved tricky to find a hint of what to try next.
EDIT:
I have remembered that I have Update 2 RC installed, so it's possible it's just a bug in the pre release.
Ok, I believe I have the answer to the issue.. Seems like this login dialog lets you log in using the Azure AD accounts, but also using Microsoft's accounts. And if you log in using the Microsoft account, it will give this error (even if this MS account has full access to your Azure account).
The solution is to go to the Active Directory in Azure and create a brand new account, mark it as a Global Administrator, then use that to log in when prompted in Visual Studio.
Microsoft has a write-up on the issue, describing the steps to go around it here:
http://www.cloudidentity.com/blog/2013/12/11/setting-up-an-asp-net-project-with-organizational-authentication-requires-an-organizational-account/
Restart VS. So that you wont get the same error again and clears the logged in user. You would need a user with Global Admin Rights in your Azure AD to login again.
I am a new administrator to a SharePoint farm and I want to start developing web-parts for our sites.
In our company we have installed SharePoint 2010 on Windows Server 2008 R2.
And we have installed Microsoft visual studio 2010 on that server.
We also have Microsoft SQL server management studio installed in the same server.
In my computer (Windows 7 professional), I have used remote desktop connection to access that server.
From SharePoint central administration, I have created new application, new site collection and new site.
I started VS with admin rights.
From File => New => Project =>Visual basic => SharePoint =>2010 => Empty SharePoint project => ok
Then I got a dialog box asking me to enter the local site that I want to use for debugging.
I entered: "http://sharepoint:21029/team1/"
I chose deploy as a farm solution checkbox.
Click Validate.
The problem is:
When I click Validate, I get the following error:
Cannot connect to the SharePoint site: "http://sharepoint:21029/team1/" Make sure that the Site URL is valid, that the SharePoint site is running on the local computer, and that the current user as the necessary permissions to access the site.
I made a lot of searches on the internet and finally I found this link:
http://www.sharemuch.com/2010/03/19/resolving-vs-2010-solution-deployment-issues-for-sharepoint-2010-projects/
When I tried to solve my problem as described in the previous link, I could not find the following databases:
SharePoint_Config
SharePoint_AdminContent_[guid]
SharePoint Site Content DB
Why I could not find the databases in the SQL Management Studio?
And why I get the error?
I want to start developing web-parts in visual studio... Any help please!!
Thank you
I got the solution finally :)
I found this critical in Event Viewer:
SQL database log in for 'SharePoint_Config' on instance 'sharepoint' failed.
I did the following steps and it solves my issue and I can now connect visual studio to my SharePoint site successfully ^_^
Grant correct permissions to the database access account
To resolve this issue, assign the database access account and then verify that the account has correct permission in SQL Server.
To assign the database access account:
On the Central Administration Web page, on the Quick Launch, click Security, and in the General Security section click Configure service accounts.
In the Credential Management section, in the upper drop-down list click the correct Web application pool for your Web application.
In the Select an account for this component drop-down list, click the domain account with which you want to associate this Web application pool, or click Register new managed account to associate a new domain account with this application pool.
Click OK to save changes.
Thank you all
What is team1? a sub site?
Try using the root site collection:
http://sharepoint:21029/
If you install sp in standalone mode read here about the connection string because sp uses an embedded edition of SQL server
When you try to log into SSRS's root site at http:// (servername)/Reports it displays:
User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
This is on a 64 bit edition of Windows 8 Pro, running SQL Server 2008 enterprise. Everything should be using the local system as the account of execution.
I have tried changing the execution account as my user which is admin, I have added the site as the trusted site, I have UAC turned completely off, I have tried to hit the site with IE AS ADMIN, Chrome, and Firefox. Everything I try the site states back that I don't have the rights. I go into SQL Server and ensure my roles are everything for my user. It does not care. I am currently reinstalling the SSRS node of the SQL Server install but am curious if anyone else had this issue yet.
I am going to try to change my account to a 'local' account as I am thinking that may be an issue yet I don't understand why SQL Server can recognize my login integrated just fine. Honestly I never ran into this and am wondering if this is an issue just with Windows 8 accessing SQL Server 2008. I would upgrade but I have a full version of SQL Server 2008 and not of 2012 so I am hesitant to just upgrade unless Express 2012 will come with Business Intelligence Development Studio and SSRS site with tools.
EDIT: 3-8-2016:
No answer with: "Just turn on site settings" is valid as this is the first time installing as the admin of the server or machine locally and not able to access the landing page as that admin.
No answer with: "Just run IE as admin" will work last I tested that.
Answers with "Trusted SITE settings MAY WORK" on Windows 8 and higher as I had a similar problem to this with Windows 10 and on Windows 10 it did fix it. I am not going to rollback two OS versions to check at home though, sorry.
I don't get how this question can be existing for a while and people are now on a mission to claim it is duplicate when the very answer is different than the potential duplicate. That whole thread deals with someone able to get into the site with elevated permission and just not setting up roles and users after the fact. This is the main user of the machine not getting to the landing page as an admin to the site listed as the default landing. Not even the same ballpark. Getting into a page as an admin to let local users in versus the highest level God user not getting in is not the same.
Everything in this answer is true but don't reinstall all of SSRS thats nonsense...
Windows 8
Disable UAC
Enable Administrator Account (You can go to Control Panel > Computer Management > Users)
Restart PC
Run IE ad Administrator when prompted login with your local Administrator account you enabled.
You will need to adjust site settings security and folder settings security. Easy fast fix just add "Everyone" in both of those with full rights.
Problem solved!
I ran into the same issue myself but with Windows 7 and SQL Server 2008. I resolved the issue following the instructions from Suresh Kumar's blog post at http://skamie.wordpress.com/2010/06/24/ssrs-and-uac/
In a nutshell here are the steps you need to take to resolve this issue:
Start your browser using 'run as Administrator'.
Navigate to the report manager and under Site Settings -> Security assign your account or the local administrators group to the System Administration role.
Then navigate to the home folder and under the security settings assign your account or the local administrators group to the Browser, Conent Manager, My Reports, Publisher and Report Builder roles.
Now you should be able to run your browser as normal and access SSRS without any issues.
Okay this is really annoying what needed to be done but here goes.
From what I kept reading Windows 8 does not by default enable the default administrator account.
I usually don't use this account but in this case I was desperate as my account could not get in.
I understand ONCE YOU ARE IN you can set the site settings, that does not help if you cannot even see the site's main landing page to see that setting.
The steps I took to finally resolve were;
Uninstall SSRS Node COMPLETELY by going to control panel>SQL Server 2008>Remove>Check Reporting Services
Enable default admin account: command prompt>run as administrator>net user administrator p#ssw0rD, hit enter.
New line: net user administrator /active:yes
Reboot
Reinstall SSRS from disc with logging in as default administrator
Install SP3 as administrator
Go to IE.exe DIRECTLY in Windows 8: C:\Program Files\Internet Explorer\iexplore.exe>Run as administrator.
Go to http:// (servername)/Reports
You SHOULD now be able to finally see site settings. NOW YOU CAN FOLLOW everyone's directions of adding YOUR USER under site settings. Also go to folder permissions and add the user as a default here as well.
(optional) For safety I would hide the default admin account now by using step 2 but substitute /active:no in.
If your main admin can't open the door, no one is getting in. That was the main issue I was having. My default admin could not get in. Now everything is working fine and dandy like it should with deploying from BIDS as well.
I had the same problem on my Windows 8 system (32 bit) with SQL Server 2008R2. When I started IE using 'run as Administrator' it still asked for a user name and password and resulted in "user does not have permissions"-error when I entered my user name and password. This is what fixed it for me:
I disabled UAC in the registry (Set HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\EnableLUA to 0). I first set notify-level under Control Panel | System and Security | Change User Account Control to the lowest level but that didn't make any difference.
After reboot I started IE using 'run as Administrator'. Went to Report Manager | Site Settings | Security: added my account as System administrator.
Still in Report Manager I went to Home | Folder Settings and added my account with role Content Manager.
I enabled UAC through Control Panel | System and Security | Change User Account Control settings by setting it to default level again. (Reboot required)
When I run IE as Administrator now and supply my user name and password it does show the homepage of the report manager.
Run Internet Explorer as administrator (right click on the Taskbar icon)
Step 1 :: Add your local username to the Site Settings security roles page. (Security - System Administrator)
Step 2 :: Add your local username to the Folder Settings on the home page. (Select Content Manager)
Close the Administrator IE session.
Open IE in normal mode under your user account.
Windows 8.1
I resolved this with help from the answer by Austin McLaughlin posted earlier. In my case I had been logged in with a local account that had administrator privileges, but attempting to http://127.0.0.1/Reports (hearinafter referred to as "the Reporting Services Manager") produced the error reported by the OP.
The key for me was that the Administrator account was disabled by default in my Windows 8.1 laptop. Note that I did not originally have Windows 8.1 Pro, so there was no "Local Users and Groups" under "Computer Management". Thus, I had to purchase the Windows 8.1 Pro Pack online from MS for $100.
In Windows Explorer, right click on the Computer node and select "Manage".
Navigate to Local Users and Groups > Users
Right click on Administrator and select Properties
De-select "Account is disabled"
Restart PC
Log in to the PC as Administrator (I did not have to enter a password for the Administrator account on first login.)
From the desktop, run IE. No need to run as Administrator, of course, since you logged in as Administrator.
Navigate to the Reporting Services Manager.
At this point you should be logged in to the Report Administrator and on the Home screen. I had not been able to get this far before.
On the Home screen, click "New Role Assignment"
In "Group or user name", enter the local administrator account you use for development; i.e.: [yourmachine]\[username]
Select all the checkboxes (shortcut is to click the checkbox to the left of "Role") and click OK.
In the upper right hand side of the page, click Site Settings.
On the left side of the page, click Security.
Click "New Role Assignment"
In "Group or user name" enter the same account as in step 10
Check "System Administrator" checkbox and click OK
As a precaution, disable the Administrator account that you enabled in step 4.
Log out, then back in with your local account from step 10.
In IE, browse to the Reporting Services Manager. Note: It was not necessary for me to start IE as Administrator.
At this point you should be able to access Reporting Services Manager page, and configure reporting services further.
Change service account type as "Network Service" in service account tab then stop and start service and run IE as Administrator.
From Reporting Services Configuration Manager you can get to the node Report Manager Url. The URL works from this screen. Now you can use the Folder Settings to add yourself as a Content Manager, etc... Now the url will work for your user.
In IE, just add Add the reporting services website to "Local intranet" sites.
That's it.
Just open IE as Run As Administrator and just type URL as http://localhost/reports
So here's a bit of context for the horror story:
Win 2003 SP2 64bit running on a VM exposed to outside world for web access.
SQL Server 2008 Std SP2 64bit with Reporting Services (RS) installed for native mode (i.e. not sharepoint mode).
IIS 6 .NET 3.5 web site app written to use the web services from RS. The site has been set to use Windows Authentication and nothing else.
To save writting custom authentication since I don't need it for this demo I have set-up a local account in Win 2003, i.e. servername\myDemoUser, effectively allow fake Windows Authentication.
Default.aspx lists folders on RS and the reports from each folder. It also has a link to the Report Builder 2 on the server.
The rsreportserver.config has been changed so that the only <AuthenticationType> is <RSWindowsNTLM> since <RSWindowsNegoiate> can't work since it's across the internet and users will not be on the same network (hence the local account myDemoUser).
The web site app has url of the form: http://mysite.mydomain.co.uk/ and the link on it to the Report Builder is of the form: http://mysite.mydomain.co.uk/services/reportbuilder/reportbuilder_2_0_0_0.application, in this case RS has been configured so the Web services virtual directory is "services".
The web.config for the website app has been set to <identity impersonate="true /> for <locations> for the ASPX pages that access the RS webservice. I even added a <location path="services/reportbuilder"> with the same thing and also to allow anonymous users.
So after all the above I go to the site from a machine that isn't on the network, I get prompted by IE8 for username/password and I enter servername\myDemoUser and the correct password. The homepage is displayed and correctly shows the list of folders and reports from RS. HOWEVER if I click the RS report builder link I get the pop window saying it's doing it's clickonce verfication stuff but after a couple of seconds it shows simple message box saying there was an authentication error. The details button then shows a text file with a bunch of stacktrace stuff in which eventually says that the server returned 401 while accessing the .application file mentioned above.
I turned on failure auditing for logins on the Win 2003 VM and I can see that when the clickonce fails it is trying to use the local machine account I logged into on the external (to my network) machine instead of the credentials I entered into the browser on that machine when testing it.
Much Googling and granting of permissions to Network service, everyone etc... on various folders involved later nothing the Report Builder bit just won't install via clickonce due to permissions or the incorrect use there of.
I'm looking into maybe changing something in the RS to try and grant permissions to the report builder to anonymous but at this point I'm pretty pessimistic that I'll actually find anything. The annoying thing about this is that this a test that doesn't represent the final thing (we'll be using custom authentication in RS) but unfortunately I have to do it, 8(.
Any ideas would be most appreciated.
It turns out that when using fake Windows authentication in this way when the machine you are accessing the site from a machine where you have not logged into the domain then clickOnce won't work because it won't pass the details you enter into the browser as found.
So the solution is to:
1) Log into a (any) domain on the machine that is going to access the clickonce link on your site.
2) In Control Panel go to User Accounts (XP)/Store Users and Passwords (Win 2003), and manage the network passwords for a user (XP) and add in the URL, username and password.
Whenever clickonce fires up for this URL it will pass the username/password specified as opposed to the local machine account.
Either of the above will solve this problem.