Does anyone have clues about how to do this? I'm basically trying to replace the strategy for "Connect With Google" from OpenID to OAuth. The challenge is identifying an old user (user on Google open ID) when a user signs in under the new OAuth scheme.
I have a working implementation which relies on email address as the primary key, as the open ID strategy captures that. The problem is, I don't want to ask for email in the OAuth flow. The ideal value is simply Google user ID, but the Open ID strategy doesn't seem to capture that.
So I have open ID tokens like https://www.google.com/accounts/o8/id?id=AfSCwGQ4PUaidXSQddJugXKLqU5V0MrXFhJM6UHybPw and trying to understand if I could get a Google ID from that.
UPDATE: I explained here how I ended up doing this migration - http://softwareas.com/migrating-user-accounts-from-google-openid-to-google-oauth-to-google-plus
We don't have a strategy ready today that avoids the user seeing another approval page.
However, rather than attempt to do an OAuth1 based hybrid flow and have to add all that legacy code to your server, I'd suggest you simply correlate on email address and move to OAuth2 login. I'm assuming you're like the majority of sites that end up asking for email address because they usually want it for account recovery. Just make sure you get the email address from OpenId as one of the signed parameters.
Then use the userinfo.email scope and OAuth2 https://developers.google.com/accounts/docs/OAuth2Login and you should be able to migrate with less developer pain.
In addition, we're in the process of adding support for OpenIDConnect and it supports a parameter of login_hint so you'd add &login_hint=bob#gmail.com to your authorization URL and it will steer the approval to the right account. This is not documented right now but it may be useful for you to try it. The user's browser could be logged into Google with a number of accounts and you want to try to get the right one. Always check the email you get from the OAuth2 flow to make sure it matches since this is just a 'hint'.
Users will still have to re-authorize for OAuth2, but we have plans to skip this reauthorization in the future. The main point is to plan on using OAuth2 and we hope to deliver a seamless migration soon and you'll be on a supported protocol.
Google uses directed identifiers for OpenID that are unique per relying party and are explicitly designed to conceal any correlatable identifier for the user. So the short answer is, no there's no way to get a Google ID that corresponds with a given Google OpenID.
One option, however, might be to use Google's OpenID+OAuth Hybrid flow. This allows you to get an OAuth token as part of a normal OpenID flow, which could then be used to get the user's ID from the OAuth2 Login API, which you can then associate with their existing account. Once you've done that for all of your existing users, then switch to using the OAuth2 Login directly.
The trick, of course, with this approach is getting all of your users to login again so that you can send them through the new flow. That will come down to how long you're willing to wait to migrate accounts, and whether you're willing to prod existing users by emailing them and asking them to login again (similar to a forced password reset).
Related
This is an API related question that applies to the APIs that I'm working on and would like to know the standard way of doing this.
say a user1 has created accounts so he can access it by
GET /accounts
but when he accesses transactions for a particular account
GET /accounts/acct1/transactions
how would this API know that the acct1 actually belongs to that user1 and is not the case where user2 is accessing user1's accounts.
This api is accessed via a Mobile app using Oauth 2.0 tokens. So while the access token control the access to API endpoints, how do we control access to only specific user's data at that endpoint. (using scopes?)
I've been looking at Spotify's apis and they seem to be doing this via v1/me end point.. Still reading...
I'm a noob at this and it looks to me that this should be documented somewhere in a standard manner in some RFC, but I couldn't find it and would appreciate direction
Can you provide more details on your use case? Why are you using OAuth?
It sounds like you need an authentication protocol - i.e. a protocol to let your server know who is accessing a particular API.
To quote the OAuth website:
OAuth 2.0 is not an authentication protocol
OAuth's main use-case is letting one application perform operations on behalf of a user of another application.
As an example, if your server wants to post a message on Facebook on behalf of a user, you will use OAuth to obtain a token from Facebook which lets you post messages on behalf of the user. Note that, in the most general case, your application does not know which user is represented by the token. Indeed, the user may not even be a (registered) user of your application - they only have to be a user of Facebook.
Practically speaking, you often can use the token you have to query Facebook for the identity of the user. So your server would extract the OAuth token from the request headers and use it to issue a query to Facebook's Graph API to obtain the user ID.
Note that the user is a Facebook user rather than a user of your app, so you will need to somehow map the Facebook user ID to your own users and permission system - i.e. check your database to ensure that the user has permissions to do what they asked to do.
This is the mechanism that is typically used when using OAuth like an authentication protocol (which, as quoted above, it is not).
I should add that if your app obtains an OAuth token and passes it to your server for the purposes of authentication, then this flow is not 100% secure, as discussed for example here, so make sure you do proper risk analysis for your case. In a nutshell, a determined attacker can theoretically impersonate your app and obtain tokens representing other users.
I'm trying to create a website to authenticate users through the use of a throwaway password where the assumption is that the user might not use the website again (basically a one time access).
I have done my research on OTP and various solutions to authentication but these don't seem to fit my requirements, most of them seem to rely on users having login credentials to the website whereas my system would allow them access without the need for registering.
The implementation of passwordless authentication by Auth0 seems to fit what you're describing. Even if you were not considering a third-party provider it may be useful to go through the documentation.
Basically, a user can login to a site without any need for a sign-up process. They can do so just by requesting that a one time code is delivered to them, for example, either by email or SMS.
This way, they can get quick access without having to setup a user and in the event that they do come back your application can recognize this because they will most likely be using the same mechanism, that is, you can use the email or mobile phone as the unique identifier.
Disclosure: I'm an Auth0 engineer.
If you do not require your users to register, why do you need authentication at all?
Why not just set a cookie with an unique identifier on the first visit? You can store data at the server side associated with that identifier. Keep track of when you last saw the user, and if they do not return within a certain period, you can delete any data you stored for that user.
I'm using Firebase for an Atlassian Connect AddOn. I want to use Firebase users to secure the data.
The users will be identified by a clientKey provided by Atlassian (probably after I fudge it a bit) - NOT BY EMAIL.
Ideally, I don't want to have to do my own authentication here, as the Firebase.createUser method would suffice entirely if I could provide something other than an email to it, but I can't find anything like that in the documentation.
Is there a way I can create Firebase users WITHOUT AN EMAIL (just an ID and password), without going to all the way into oAuth and all that jargon to create my own custom authentication?
A Firebase user must have an email. If that is a problem then we can't use a Firebase "user", but instead a "token" (which must have a UID as part of it's payload and hence behaves the same way in terms of security once it reaches their datastore).
If you don't need a password, then "instead of double-authenticating and duct taping" as #Kato kindly pointed out, you can generate your own Firebase tokens and serve them to the client.
If you require the user to provide a password then you'd have to implement your own verification before you generate the token and serve it to the client. Since there's no Firebase user involved anymore, but rather a token your privileged server can arbitrarily create and serve, it's your responsibility to ensure you're doing that at the right time (i.e. when a user has provided your server with an adequate ID and password).
Read more about Custom Authentication here and tokens.
I'm working on an internal website for the company I work for. The website will be only available to company staff. We use Google Apps for Business, so we would like authentication to be done using our google accounts.
I've gone through 'google sign in' samples from here: https://developers.google.com/+/
It works, but the problem we run into is that it requires the user to sign up to Google+. This is a speed bump we would prefer not to have.
Are there any ways around this? Thanks.
It shouldn't be too hard to roll your own sign in using the lower levels of Oauth, eg 'email' scope. It's hard to give a more specific answer because it depends on your architecture (eg. are you predominantly server-side or client-side) and what kind of session do you want to create by the sign in process. For example, if you are client/REST based, you probably don't want any session at all as REST encourages statelessness. On the other hand, if you are more web based, serving static pages, you will want a session.
In simple terms, you will be doing something that generates an access token, and then processing that access token to determine the email address (or Google ID) of the person who created it. You will then establish some sort of session (eg. using session cookies) that identifies future requests from that user.
Feel free to add some more detail to your architecture and I'll try to finesse the answer.
For simple http servlet sessions, it will be something like.
User requests a protected page
servlet detects that there is no session and/or session has no authenticated user
servlet redirects to an Oauth page to request an access code. something like
https://accounts.google.com/o/oauth2/auth?redirect_uri=xxx&response_type=code&client_id=zz&approval_prompt=auto&scope=email
NB research the exact URL, don't rely on this to be exact
If the user isn't logged on, he'll be prompted; if he has multiple logins, he'll be prompted; if he hasn't yet granted email access, he'll be prompted. If none of these conditions are met (the normal case) he won't see anything.
Browser will redirect to the redirect_uri, carrying an access token (or an auth code if this is the first time the user has used the app)
Post the token to the Google userinfo endpoint, and you will receive a decode containing the email address
Store the email into a session object (or retrieve your own user object and store that)
redirect back to the originally requested page. You can use the OAuth state parameter to pass that around
et voila. all future page requests from that user will be within a session containing some user identification.
NB This is just an outline and I may even have missed a step. You will still need to do your own OAuth research.
Apparently not:
(..) if a Google user who has not upgraded to a Google+ account clicks
on the Sign in with Google+ button, the same consent dialog that opens
will take the user into an account upgrade flow.
Weirdly the docs for OAuth2 states:
Google+ Sign-In works for all users with a Google account, whether or
not they have upgraded to Google+.
Is it possible to limit the users who can sign in with open id on my site. I have clients that I want to give access to a client area on my website. I don't want anyone with a open id to be able to login just my clients. Is this possible?
One way to do this would be to create a "sign up" form to validate the user. Part of the sign up process would be to associate your OpenID. You can then leave the newly created account in a "pending" mode to be approved by an admin. (note: if you have a different way of adding the clients, you would use that method.)
Basically you would create a profile for a user the same way you would in any other application, except you would replace the UserName / Password portion with OpenID.
OpenID is made for authentification, not for authorization. I am sure, you could make it work (*), however you must keep in mind that OpenID has not been made for this sort of task.
If you want to do it, you must probably restrict the set of allowed OpenID providers to prevent a malicious provider to hand faked/bogus identity URLs to your application (consumer).
(*) how, depends on where you want to enforce the restriction (web server, web framework, etc.)