I am using the Java Visual VM command line to open remote JMX connections. I use it like this:
jvisualvm.exe --userdir "user-config" --openjmx hostname:port
This works perfectly fine. But the connection name in the view shows as hostname:port. Is there any way I can pass a logical name to this connection? I can rename the connection from the view, but it doesn't stick when I reopen. I have about 10 connections from the same hostname, so wanted to logically separate out the individual connections.
Any ideas? It would even work if can just have the names stick in the user-config.
You can start your application with -Dvisualvm.display.name="Your_name" and your application will be named "Your_name" in VisualVM. See this and this feature requests for details. Note that you have to use VisualVM 1.3.4+ or Java VisualVM from JDK 7 Update 6 or newer.
Related
I created a simple project using ATG 10.2 .I want to know how to deploy it in weblogic. Please provide detailed procedure with screenshots,if possible.
To provide a 'detailed' procedure is beyond the scope of what StackOverflow is trying to provide. That said, if you have an understanding of the Weblogic Management Console you should be able to follow these steps to setup your initial deployment:
Create a Server
1.1 Specify a server name (eg. commerce) and the port number this server will run on (eg. 8180). Select it as a 'Stand-alone server'.
1.2 Once created go to Configuration > Server Start for the newly created server and modify the 'Arguments' block and include the following setings (assuming you are running windows, for Unix update your own paths)
-Datg.dynamo.data-dir=c:\ATG-Data -Datg.dynamo.server.name=commerce -d64 -XX:ParallelGCThreads=8 -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Xms1152m -Xmx2048m -XX:NewSize=128m -XX:MaxNewSize=256m -XX:PermSize=128m -XX:MaxPermSize=256m
1.3 Save your Server
Create DataSources
2.1 In the Console click on 'Services > Data Sources'
2.2 Create 'New' datasources for each of your connections. As a minimum you will need connections for ATGSwitchingDS_A, ATGSwitchingDS_B (Assuming you are doing switching datasources) and ATGProductionDS. These names should match your JNDI names in your property files. Remember to specify the 'commerce' server as the target for each of the datasources.
Create Deployment
3.1 Assuming you've already built your EAR (eg. ATGProduction.ear) and it is available in c:\deployments you need to create a deployment in Weblogic. You need to create the deployment in the console and specify the target as 'commerce'. Once done you need to also 'start serving requests' on the deployment.
Start Server
You should now be able to see your server running on port 8180 with the log files being written to c:\ATG-Data\servers\commerce\logs.
If after this things aren't running, post specific questions about your issues and someone here might be able to help you.
We have a Windows Server 2012 64bit + Weblogic 12c setup. The AdminServer requires a higher PermSize when being used with a 64bit OS, thus we need to modify the "setDomainEnv.cmd" (as described in other questions here on stackoverflow).
When starting the AdminServer through the usual "startWeblogic.cmd" script, it uses the settings in "setDomainEnv.cmd" that sets the PermSize etc. successfully, but when using NodeManager "startServer()" command, it does not.
I read something in the documentation about the fact that one can control the parameters that are loaded on startup of a managed server (with NodeManager), but I did not find the right way to do it.
I would hope that we can achieve a consistent behaviour when starting a managed server (and the AdminServer) through NodeManager or manually.
Any ideas?
UPDATE:
I checked what's going on when starting managed server and(!) in comparison what's going on when starting the AdminServer. Result: the AdminServer process (it starts a 'javaw.exe' instance in contrast to a 'java.exe' instance for a managed server) never get's passed ANY parameters set in the setDomainEnv.cmd script.. it's basically full of Oracle internal parameters.
To me all this looks completely messed up and inconsistent. In addition to this I found an issue reported by Oracle that mystically talks about setting environment variables when running on a 64bit OS (see headline "Developer ZIP Distribution Fails on Windows 64-bit and Linux 64-bit"):
https://docs.oracle.com/cd/E24329_01/doc.1211/e26593/issues.htm#WLSRN238
I have idea if this applies to my version or not, since the version I downloaded does not say "developer" version, it basically was the primary weblogic download for the latest release.
The question that comes to my mind is this: what is the expected way of starting the AdminServer if not using "startServer"? Is there a bug that nobody cares about, since it is usually done differently? I am really disappointed to how confusing this rather simple topic evolves when starting to read Oracle documentation: it simply does not say anything about it at all.
Command line that is triggered when starting the AdminServer through "startServer()" command:
C:\PROGRA~1\Java\JDK17~1.0_6\jre\bin\javaw.exe -classpath "C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\rt.jar;C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\i18n.jar;C:\PROGRA~1\Java\JDK17~1.0_6\lib\tools.jar;D:\Oracle\Middleware\wlserver\server\lib\weblogic_sp.jar;D:\Oracle\Middleware\wlserver\server\lib\weblogic.jar;D:\Oracle\Middleware\oracle_common\modules\net.sf.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar;D:\Oracle\Middleware\wlserver\modules\features\oracle.wls.common.nodemanager_2.0.0.0.jar;D:\Oracle\Middleware\oracle_common\modules\com.oracle.cie.config-wls-online_8.1.0.0.jar;D:\Oracle\Middleware\wlserver\common\derby\lib\derbyclient.jar;D:\Oracle\Middleware\wlserver\common\derby\lib\derby.jar;D:\Oracle\Middleware\wlserver\server\lib\xqrl.jar" "-Djava.runtime.name=Java(TM) SE Runtime Environment" -Dpython.cachedir=C:\Users\ADMINI~1\AppData\Local\Temp\2\wlstTempAdministrator -Djava.protocol.handler.pkgs=weblogic.utils|weblogic.utils|weblogic.utils -Djava.vm.version=24.65-b04 "-Djava.vm.vendor=Oracle Corporation" -Djava.vendor.url=http://java.oracle.com/ -Dpath.separator=; "-Djava.vm.name=Java HotSpot(TM) 64-Bit Server VM" -Dweblogic.RootDirectory=D:\Oracle\Middleware\user_projects\domains\test1234\. "-Djava.vm.specification.name=Java Virtual Machine Specification" -Djava.runtime.version=1.7.0_67-b01 -Djavax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl -Djava.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment -Djava.endorsed.dirs=C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\endorsed -Dos.arch=amd64 -Djava.io.tmpdir=C:\Users\ADMINI~1\AppData\Local\Temp\2\ -Dline.separator=
"-Djava.vm.specification.vendor=Oracle Corporation" -Djava.naming.factory.url.pkgs=weblogic.jndi.factories:weblogic.corba.j2ee.naming.url "-Dos.name=Windows Server 2012 R2" -Dprod.props.file=D:\Oracle\Middleware\wlserver\.product.properties -Dorg.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB -Djava.library.path=C:\PROGRA~1\Java\JDK17~1.0_6\jre\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;;D:\Oracle\Middleware\wlserver\server\native\win\x64;D:\Oracle\Middleware\wlserver\server\bin;D:\Oracle\Middleware\oracle_common\modules\org.apache.ant_1.9.2\bin;C:\PROGRA~1\Java\JDK17~1.0_6\jre\bin;C:\PROGRA~1\Java\JDK17~1.0_6\bin;D:\Oracle\product\12.1.0\dbhome_1\BIN;C:\Windows\System32;C:\Windows;C:\Windows\System32\wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~2\VISUAL~1\bin;C:\PROGRA~1\doxygen\bin;C:\PROGRA~1\TORTOI~1\bin;C:\PROGRA~2\WINDOW~4\8.0\WINDOW~1\;C:\PROGRA~1\MICROS~1\110\Tools\Binn\;D:\Oracle\Middleware\wlserver\server\native\win\x64\oci920_8;. "-Djava.specification.name=Java Platform API Specification" -Djava.class.version=51.0 -Dorg.omg.CORBA.ORBClass=weblogic.corba.orb.ORB -Dos.version=6.3 -Djavax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl -Djava.awt.printerjob=sun.awt.windows.WPrinterJob -Djava.specification.version=1.7 -Djava.class.path=C:\PROGRA~1\Java\JDK17~1.0_6\lib\tools.jar;D:\Oracle\Middleware\wlserver\server\lib\weblogic_sp.jar;D:\Oracle\Middleware\wlserver\server\lib\weblogic.jar;D:\Oracle\Middleware\oracle_common\modules\net.sf.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar;D:\Oracle\Middleware\wlserver\modules\features\oracle.wls.common.nodemanager_2.0.0.0.jar;D:\Oracle\Middleware\oracle_common\modules\com.oracle.cie.config-wls-online_8.1.0.0.jar;D:\Oracle\Middleware\wlserver\common\derby\lib\derbyclient.jar;D:\Oracle\Middleware\wlserver\common\derby\lib\derby.jar;D:\Oracle\Middleware\wlserver\server\lib\xqrl.jar -Djava.vm.specification.version=1.7 -Dweblogic.management.GenerateDefaultConfig=false -Djava.home=C:\PROGRA~1\Java\JDK17~1.0_6\jre "-Djava.specification.vendor=Oracle Corporation" -Dawt.toolkit=sun.awt.windows.WToolkit "-Djava.vm.info=mixed mode" -Djava.version=1.7.0_67 -Djava.ext.dirs=C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\ext;C:\Windows\Sun\Java\lib\ext "-Djava.vendor=Oracle Corporation" -Djava.vendor.url.bug=http://bugreport.sun.com/bugreport/ -Dweblogic.store.DisableDiskScheduler=true -Dpython.verbose=warning weblogic.Server
UPDATE 2:
Start the AdminServer through node manager (nmStart('AdminServer')) creates a usual "java.exe" process and starts up the AdminServer with correct memory settings. But this is even more confusing: why is "startServer()" creating a separate process (javaw.exe) with entirely different settings? Why are my settings now totally different for AdminServer? What is the "correct" way of starting the AdminServer (development/production?). Two thumbs down on this environment.
UPDATE 3:
After repeating further tests the solution of getting "startServer()" to work is basically as follows: do not worry about the node manager settings at all, edit the "startWeblogic" script directly by adding additional java options inside of it (as usual by adding -D start parameters). The reason for all this is basically that the global settings (as used by node manager) are ignored completely, see my pasted command line output.
Check the nodemanager.properties file in your Oracle install ( e.g. /opt/ora/mw/wlserver_10.3/common/nodemanager/nodemanager.properties ) and verify that these options are set:
StartScriptName=startManagedWebLogic.sh
StartScriptEnabled=true
so the nodemanager is starting your servers with the appropriate scripts. You also have to option of setting server specific start attributes via the admin console - go to:
Servers -> Server Name -> Server Start tab -> Arguments
You can fill in server specific JVM args, like -XX:MaxPermSize=4096m in this field that will be used by the nodemanager. This may be a better/easier idea than hard coding it in the setDomainEnv script.
UPDATE
Attempt issuing an nmStart() command rather than a startServer() command for the AdminServer.
startServer allows you to start a server WITHOUT the nodemanager. It uses javaw.exe to effectively background the process
nmStart allows you to start the server WITH the nodemanager - which is why you get the correct memory settings. Because the process is started via a service, it is more or less automatically backgrounded, which is why you see the normal java.exe
I created two sepaerate directories in which I installed the Standalone Mule ESB server:
/ee/mmc-distribution-mule-console-bundle-3.5.2-HF1
/ee2/mmc-distribution-mule-console-bundle-3.5.2-HF1
I start up the first server, and below is the status:
[root#x240perf2 mmc-distribution-mule-console-bundle-3.5.2-HF1]# ./status.sh
MMC is running as PID=1998.
Mule Enterprise Edition is running as PID=2619.
Then I try to start the second instance:
[root#x240perf2 mmc-distribution-mule-console-bundle-3.5.2-HF1]# ./startup.sh
Port 8585 is in use, please make it available and try again.
So apparently the port 8585 is being used by the original instnace
So I stop the first instnace, and start the second istance, which comes up successfully, as follows:
./startup.sh
Please enter the desired port for Mule [Default 7777]:
Starting MMC, please wait...
class com.sun.jersey.multipart.impl.MultiPartConfigProvider
class com.sun.jersey.multipart.impl.MultiPartReader
class com.sun.jersey.multipart.impl.MultiPartWriter
[11-13 16:49:19] WARN HttpSessionSecurityContextRepository [http-bio-8585-exec-1]: Failed to create a session, as response has been committed. Unable to store SecurityContext.
[11-13 16:49:32] WARN HttpMethodBase [http-bio-8585-exec-12]: Going to buffer response body of large or unknown size. Using getResponseBodyAsStream instead is recommended.
[11-13 16:49:38] WARN HttpSessionSecurityContextRepository [http-bio-8585-exec-12]: Failed to create a session, as response has been committed. Unable to store SecurityContext.
Nov 13, 2014 4:49:50 PM org.apache.catalina.core.StandardServer await
INFO: A valid shutdown command was received via the shutdown port. Stopping the Server instance.
Nov 13, 2014 4:49:50 PM org.apache.coyote.AbstractProtocol pause
INFO: Pausing ProtocolHandler ["http-bio-8585"]
But notice it seems to be using 8585 for tomcat (of which I know little about, except it some sort of app server, never used it)
I examined this site:
http://www.mulesoft.org/documentation/display/33X/Running+Multiple+Mule+Instances
but it does nto discuss the issue., and the page it points do does not seem current. Did I misunderstand something
Is it possible to run two separate instances of Mule ESB at the same time
and if so, how ? (how would I change the port its using, what file should I modify)
Thanks
Edit: my second post in response to answer:
(BTW: I am using Mule ESB standalone Enterprise Edition 3.5.2)
To make sure I did not have any apps that were running
on port 8585, I shutdown my original instance, and created two new instances, and made sure no apps were deployed to either instance.
I brought up the first instance without issue, but the second instance I brought up still gives me the port 8585 in use error (from startup.sh)
This site says that the MMC default port is 7777, but the tomcat default port on which it runs is 8585
http://www.mulesoft.org/documentation/display/current/Setting+Up+MMC-Mule+ESB+Communications
I used the following command to find all files within my second instance of por t 8585
find . -type f |xargs grep "8585
Other than log files I got two hits
startup.sh
and
/mmc-3.5.2-HF1/apache-tomcat-7.0.52/conf/server.xml
I did NOT find in either instance the $MULE_HOME/apps/mmc/mule-config.xml (probably because I have no apps deployed)
In the server.xml, the MMC apparently uses tomcat to
handle the MMC applicaiton, and server.xml contains
the following:
<Connector port="8585" protocol="HTTP/1.1"
So I guess I could change 8585 to 8586 at this point, but ...
The startup.sh has serveral (about 9 or 10) hardcode dreferences to 8585 to check that the MMC is running and take action if it is or is not running
So do I actually have to change the entire startup.sh to replace 8585 with 8586 i the second instance as well as change the server.xml port 8585 reference ?
Thanks
You can run as many instances as you want, as long they don't use the same ports. Looks like you are deploying something in port 8585, so in the second instance you have to select a different port.
Is that port being used in any application that you developed and deployed in the Mule runtime?
Also, if you are using the Mule runtime with the MMC agent activated, you also have to change the port for the agent in the second instance. I think you can do that in the /conf/wrapper.conf or by passing to the startup script the following parameter:
-Dmule.mmc.bind.port=7778
(or any port that is free).
You can run as many as you want.
In MMC we can able to deploy and run many applications each applications has its own instance
I m using eclipse indigo and i installed the Jboss Server earlier.i though that every thing is fine;
But when i make a right clik on a JSP page for exemple ,there is no "Deploy" ,and if i what to deploy the whole project..the same thing i can't do it because the is no "Deploy" option.
iand if i ighone all that and do a "Run As" --> "Run on a server" i get a http 404 error saying the requested ressource is not available.
i have Jboss in my eclipse ,is there any why to know that Jboss is well insatlled??
Thank you
The easiest way to check whether JBoss 7 is running is to access native management interface.
Usually it's bound to 9999 port.
In order to verify the port look for port attribute of management native interface socket binding in standalone.xml (standalone-full.xml or whatever configuration you are using)
For localhost it would be:
http://localhost:9999
Another way to check JBoss 7 status is to use management console.
Usually it's bound to 9990 port.
In order to verify the port look for port attribute of management HTTP interface socket binding in standalone.xml (standalone-full.xml or whatever configuration you are using).
For localhost it would be:
http://localhost:9999
Additionally, you can check the so called marker files.
Just go to deployments directory and look for .deployed file (if the file exists it means that your application is successfully deployed).
You can read more about deployment descriptors at:
https://docs.jboss.org/author/display/AS7/Application+deployment
I've been hacking and googling for a while now, and I've found several statck overflow threads that seemed like they were written for older versions of intellij, with various application servers. Usually they tell you to enter
java -Xdebug -Xrunjdwp:transport=dt_socket,address=51887,suspend=n,server=y
One answer suggests using something like
-agentlib:jdwp:transport=dt_socket,address=51887,suspend=n,server=y
But then I get this:
Error occurred during initialization of VM
Could not find agent library: libjdwp:transport.jnilib (searched /Library/Java/JavaVirtualMachines/1.6.0_37-b06-434.jdk/Contents/Libraries:/System/Library/Java/Extensions:/Library/Java/Extensions:.)
Then after one or the other of the above they tell you something like "Edit Configurations> jetty > remote and enter localhost, 51887" (the port number varies)
However in 12, the page you land on after you select remote has a plethora of options, and is asking for JNDI ports, not jdwp ports on another tab it actually suggests the jdwp parameters above.
Researching the JNDI port bit, generally yields instructions to add args like this to your command line...
-Dcom.sun.management.jmxremote= \
-Dcom.sun.management.jmxremote.port=1099 \
-Dcom.sun.management.jmxremote.ssl=false \
-Dcom.sun.management.jmxremote.authenticate=false\
I've done that too and I can see port 1099 held by java (using lsof) and I can telnet to 1099, so I know the JVM is listening. (We'll try not to worry about the fact that that appears to say, open up a port by which anyone install arbitrary java code over the network to your computer without a password)
However, in Intellij whenever I try to deploy and debug it gives me the following message:
I can see java RMI communications over 1099 when I snoop port 1099 with wireshark (but they are illegible). Evidently, the communications are not satisfactory for Intellij, so I'm wondering if there's something I need to do to Jetty to get it to play nice. Note that changing the Jetty version is not presently an option, so let's not go there :).
I've also tried removing the artifact, disabling make, and trying to just connect the debugger, but it still gives me the same red baloon and error message, so evidently the JNDI (port 1099) part is required.
Does anyone see something I'm doing wrong, or know of something else I should do to get this to work?
(I'm wondering if it is something similar to this: http://youtrack.jetbrains.com/issue/IDEA-65746 jboss issue)
Edit: Thanks to this google groups post I've discovered that it is possible to get the debugger connected if you don't specify Edit Configurations> + > jetty > remote, but instead choose Edit Configurations > + > remote, but debug and deploy is what I'm after so that's only a half solution.
Jetty remote configuration requires several manual steps which are performed automatically when you start Jetty directly from IDEA using the local configuration instead.
If you absolutely must use the remote configuration, try the following steps:
In the Remote staging section of the Server tab of the IDEA Jetty remote run configuration:
specify Same file system for Type and Host
specify path to the <Jetty home>/contexts folder in the Local path field of the contexts section
(settings will differ if you have Jetty running on another machine than IDEA, but I assume it's the same machine in your case)
Pass the following VM parameters to the Jetty process:
-Dcom.sun.management.jmxremote=
-Dcom.sun.management.jmxremote.port=<JNDI port>
-Dcom.sun.management.jmxremote.authenticate=false
-Dcom.sun.management.jmxremote.ssl=false
-DOPTIONS=jmx
<JNDI port> value should be the same as specified in the JNDI port field of the IDEA Jetty run configuration
Pass the following configuration files to the Jetty process (in the command line):
etc/jetty-jmx.xml
etc/jetty.xml
If you need to debug, you should also pass to Jetty process VM parameters taken from IDEA Jetty run configuration: Startup/Connection tab, select Debug list item under the To debug remote server JVM ...
Here is the sample command line to start Jetty process with all the required options:
java -Xdebug -Xrunjdwp:transport=dt_socket,address=60208,suspend=n,server=y -DSTOP.PORT=0 -Dcom.sun.management.jmxremote= -Dcom.sun.management.jmxremote.port=1099 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -DOPTIONS=jmx -Dfile.encoding=UTF-8 -classpath start.jar etc/jetty-jmx.xml etc/jetty.xml