Can I install VB6 over VS 2010? - vb.net

I have already using Visual Studio 2010 for my project. Now I have to work with a Visual Basic 2006 legacy application. Can I install VB 2006 Enterprise Edition on my system?
Will this affect Visual Studio 2010?

Yes. Visual Studio 2010 and Visual Studio 6 will happily install side-by-side.

You can run multiple versions of Visual Studio on the same machine. I currently have VS2003, VS2005, VS2008 and VS2010 installed and am using all of them.
Where you may get into problems is with something like hooking up the older ones to TFS. This can be done, as I have VS2003 and VS2008 connected to TFS2010, but my VS2005 won't work as it whinges about the provider for some reason.
Another area to watch out for is IIS. As you have already installed VS2010, IIS may be defaulting to .Net 4.0 so if you start deploying .Net 2.0 apps then the websites may not work without some adjustment of things like app pools.
But if you are just using them independently of each other then you should be fine. If you're really paranoid, consider creating a VM and installing the old VS on it.
EDIT
I see from your edited post that you were talking about VB6. This also can be installed alongside any of the later versions of Visual Studio.

Related

How do I force Visual Studio to make this project compatible with VS 2022?

I installed VS 2022 Community and am trying to work on a project that was developed on VS 2008 Pro. VS is giving me this report:
How do I force VS to make whatever upgrades it needs in order to run this program? I can provide more info if needed.
MS in their wisdom, dropped support for the Setup & Deployment project, can't remember when exactly, then after a bit of an uproar re-instated it through the Visual Studio marketplace https://marketplace.visualstudio.com/items?itemName=VisualStudioClient.MicrosoftVisualStudio2017InstallerProjects
Since your project has a file .vddproj, it might be a Smart Device CAB project.
It is not supported by later versions of visual studio.
It is recommended that you open it with VS2008.

Universal Windows App Visual Studio 2015 Community no designer, no controls in toolbox, no properties

I am using Visual Studio Community 2015 to create Universal Windows App.
I am facing following problems-
1. No designer view.
2. No controls in toolbox.
3. Property window don't show any properties of control.
4. No phone emulators are shown after installing EmulatorSetup.exe
Visual Studio Installed Components are as follows
Microsoft Visual Studio Community 2015
Version 14.0.24720.00 Update 1
Microsoft .NET Framework
Version 4.6.01055
Installed Version: Community
Visual Basic 2015 00322-20000-00000-AA136
Visual C# 2015 00322-20000-00000-AA136
Visual C++ 2015 00322-20000-00000-AA136
Application Insights Tools for Visual Studio Package 4.2.60128.3
ASP.NET and Web Tools 2015.1 (Beta8) 14.1.11106.0
ASP.NET Web Frameworks and Tools 2012.2 4.1.41102.0
ASP.NET Web Frameworks and Tools 2013 5.2.30624.0
Common Azure Tools 1.5
JetBrains ReSharper Ultimate 10.0.2 Build 104.0.20151218.120627
JSLint.NET for Visual Studio 2.2.0
Microsoft Azure Mobile Services Tools 1.4
NuGet Package Manager 3.3.0
PreEmptive Analytics Visualizer 1.2
SQL Server Data Tools 14.0.50616.0
TypeScript 1.7.6.0
Visual Studio Tools for Universal Windows Apps 14.0.24720.00
Web Essentials 2015.1 1.0.209
I have had the same problem and the only way I have got the designer to work is (and this should work if build 10240 is acceptable for your development):
Open your project
Go under "Project" to "Properties"
Select "Application" on the left and change BOTH the target version and the min version to "Windows 10 (10.0; Build 10240)
Once you do that the XAML designer will start working again. I've had to do this on 4 different workstations and it's worked everytime.
As to why build 10568 doesn't work? Got me, agile development, will be fixed in a patch? :p
I had the same problem and could not change BOTH versions to Build 10240 as the Application listbox only showed 10586 in Properties/Application. I thought I could arrange that by editing the .csproj file, which is XML after all, but any change there makes all files in the Solution Explorer immediately unavailable. Then I noticed (running Winver.exe) that my W10 still shows build 10240 despite regularly (but not automatically) running Windows updates. Despite multiple solutions tried, this didn't change. I finally used the MediaCreation Tool to download a new Windows 10 on a USB stick and reinstalled Windows 10, preserving apps and data. And now I am really on 10586 ...and the Design mode shows again when I open my project.
I hope this helps a few!
If you are looking for the SSIS toolbox, click SSIS tab, then SSIS Toolbox.

Add Visual Studio Web to Visual Studio Desktop

I just wanted to start learing WCF and could not find the WCF Service Library in my Visual Studio 2012 Windows Desktop. After reading and searching I found out that I need the VS Web to get access to it. Since I try to avoid installing two versions of VS I wat to ask if it is possible to add VS Web to VS Desktop.

Board Support Package

Currently our BSP is built using Visual Studio 2005. I would like to update this to use VS 2010 at the very least, preferably 2012. I have not been able to find anything that will allow me to do this. I tried to upgrade the project to VS 2008, but it failed to load the project. I was wondering if anybody had some ideas or could at least point me in the right direction.
Visual Studio 2008 does support the Platformbuilder Plugin and creating Applications for Win CE, however the import wizard is not perfect, you may need to change some settings by hand.
Visual Studio 2010 does not support creating BSPs or applications for Win CE.
Visual Studio 2012 will support creating of BSPs and applications for Windows Embedded Compact 2013.
It also includes a new faster version of the .Net Compact Framework.
http://blogs.msdn.com/b/windows-embedded/archive/2012/11/14/windows-embedded-compact-v-next-uncovered.aspx
http://channel9.msdn.com/Events/Visual-Studio/Visual-Studio-2012-Virtual-Launch/Visual-Studio-2012-support-for-Windows-Embedded-Compact

Upgraded WinForms project from VS2005 to VS2012. Now my ReportViewer DLLs are missing

I got a copy of a Visual Studio 2005 project from a friend. The project referenced the DLLs Microsoft.ReportViewer.Common and Microsoft.ReportViewer.WinForms. On my machine I have Visual Studio 2012. I upgraded the project. The references to these DLLs are broken, understandably, because they are Windows locations, not in the VS project. So, I want to delete the references and re-create, but I cannot find the DLLs on my machine. Do they not get installed with Visual Studio 2012? Can I download them?
I got a copy of a Visual Studio 2005 project from a friend
Which explains the problem, the target .NET version of your project is 2.0. The ReportViewer included with VS2012 requires at least 3.5.
Fix it with Project + Properties, Application tab, Target Framework combobox. You'll then find the ReportViewer control back under the "Reporting" header in the toolbox.
These have been replaced by Report Server. Though if you'd copy them over from your VS2005 machine you should still be able to use them as binary references in your solution. You can download the binaries from the MSDN Download site.
Though there should be binaries for Visual Studio 2012 as well. I suspect they will get installed when you install the SQL Server Development tools, which include the SQL Server Reporting Server components.
You can try to use the Redistributable package for Visual Studio 2010.