Related
I am seeking to create a procedure that I can pass a one column table, and the procedure will output the median. Right now I have a procedure that will determine the median; however, I am getting errors that my #table table variable has not been declared and that the stored procedure could not be found.
My median procedure:
CREATE OR ALTER PROCEDURE dbo.median
(#table NUMERIC,
#median FLOAT OUTPUT)
AS
DECLARE #size AS NUMERIC
SET #size = (SELECT COUNT(*) FROM #table)
SET #median = (SELECT AVG(1) FROM (SELECT *, ROW_NUMBER() OVER(ORDER BY 1) AS ROW FROM #table) AS subquery
WHERE subquery.ROW = ROUND(#size / 2, 0) OR subquery.ROW = ROUND(#size / 2, 0, 1))
RETURN
GO
Calling the procedure:
DECLARE #Arsenic TABLE(Ar FLOAT)
INSERT INTO #Arsenic SELECT Arsenic from dbo.HubspotWaterTestAverages
EXEC dbo.median (SELECT Arsenic FROM dbo.HubspotWaterTestAverages)
NOTE: Arsenic represents the Arsenic level results from water tests, and the values range from null to 10
The working procedure is expected to just return the median value for the column, and later on I am planning on cross joining that to a master table. Thank you for any help!
This may help. Except table variable have to use Table Type.
CREATE TABLE Employee
(
EmpId int NOT NULL,
EmployeeName nvarchar(MAX),
)
GO
CREATE TYPE EmployeeType AS TABLE
(
EmpId int NOT NULL,
EmployeeName nvarchar(MAX)
)
GO
CREATE PROCEDURE PassTableTypeIntoProcedure(#EmployeeType EmployeeType READONLY)
AS
BEGIN
INSERT INTO Employee
SELECT * FROM #EmployeeType
END
GO
DECLARE #EmployeeTypeVariable AS EmployeeType
INSERT INTO #EmployeeTypeVariable VALUES
(1,'A'),
( 2,'B')
EXEC PassTableTypeIntoProcedure #EmployeeTypeVariable
GO
SELECT * FROM Employee
Don't quite understand IN statement. First variant works fine:
select manufacturers.id
from manufacturers
where manufacturers.id in (select manufacturerId
from pcs group by manufacturerId
having count(manufacturerId) > 1)
But when I make subquery a procedure:
CREATE PROCEDURE [dbo].Get_manufacturers #productType varchar(50)
as
begin
declare #query varchar(500)
set #query='select manufacturerId from ' + QuoteName(#productType) + '
group by manufacturerId having count(manufacturerId) > 1'
declare #t table (manufacturerId int)
insert into #t exec(#query)
select manufacturerId from #t;
end
select manufacturers.id
from manufacturers
where manufacturers.id in (Get_manufacturers 'pcs')
I get an error: Msg 102, Level 15, State 1, Line 4
Incorrect syntax near 'pcs'
Get_manufacturers 'pcs' works properly. Where am I wrong?
Don't quite understand IN statement
...
Get_manufacturers 'pcs' works properly - it returns a table
You misunderstand both stored procedures and IN condition.
From IN (Transact-SQL):
test_expression [ NOT ] IN
( subquery | expression [ ,...n ]
)
What the stored procedure returns is not a subquery, neither it's an expression.
Here is a link to understand what subquery is Using a Subquery in a T-SQL Statement
A subquery is a SELECT statement that is nested within another T-SQL
statement
So stored procedure is not a subquery, it's just not a SELECT statement.
But even when you say that stored procedures returns a table it's wrong: you can JOIN a table to another table but you cannot join the result of stored procedure.
And even if you "see" the result set returned by a procedure as a "table" it's not a table.
Based on Rokuto and Gordon Linoff suggestions, Alter the procedure by omitting the table declaration:
ALTER PROCEDURE [dbo].Get_manufacturers #productType nvarchar(50)
as
begin
declare #query nvarchar(500)
set #query= N'select manufacturerId from ' + QuoteName(#productType) + '
group by manufacturerId having count(manufacturerId) > 1'
---declare #t table (manufacturerId int)
---insert into #t exec(#query)
---select manufacturerId from #t;
exec(#query)
end
GO
Then, Use a temporary table to fill in the results of the stored procedure.
IF(OBJECT_ID('tempdb..#tmp_manufacturers') IS NOT NULL)
BEGIN
DROP TABLE #tmp_manufacturers
END
CREATE TABLE #tmp_manufacturers
(
manufacturerId int
)
INSERT INTO #tmp_manufacturers (manufacturerId)
EXEC dbo.Get_manufacturers 'pcs'
lastly, add it to your IN condition.
select m.id
from manufacturers M
where m.id IN (select t.manufacturerId From #tmp_manufacturers T)
As #Gordon Linoff said, procedures does not return tables.
But, if you want to store output data from stored procedures, you need to put it into table e. g.:
DECLARE #manufactures TABLE (Id int)
INSERT INTO #manufactures
exec Get_manufacturers 'pcs'
select manufacturers.id
from manufacturers
where manufacturers.id IN (SELECT Id FROM #manufactures)
Instead of table variable, you can use temporary table.
I have a stored procedure that takes in two parameters. I can execute it successfully in Server Management Studio. It shows me the results which are as I expect. However it also returns a Return Value.
It has added this line,
SELECT 'Return Value' = #return_value
I would like the stored procedure to return the table it shows me in the results not the return value as I am calling this stored procedure from MATLAB and all it returns is true or false.
Do I need to specify in my stored procedure what it should return? If so how do I specify a table of 4 columns (varchar(10), float, float, float)?
A procedure can't return a table as such. However you can select from a table in a procedure and direct it into a table (or table variable) like this:
create procedure p_x
as
begin
declare #t table(col1 varchar(10), col2 float, col3 float, col4 float)
insert #t values('a', 1,1,1)
insert #t values('b', 2,2,2)
select * from #t
end
go
declare #t table(col1 varchar(10), col2 float, col3 float, col4 float)
insert #t
exec p_x
select * from #t
I do this frequently using Table Types to ensure more consistency and simplify code. You can't technically return "a table", but you can return a result set and using INSERT INTO .. EXEC ... syntax, you can clearly call a PROC and store the results into a table type. In the following example I'm actually passing a table into a PROC along with another param I need to add logic, then I'm effectively "returning a table" and can then work with that as a table variable.
/****** Check if my table type and/or proc exists and drop them ******/
IF EXISTS (SELECT * FROM sys.objects WHERE type = 'P' AND name = 'returnTableTypeData')
DROP PROCEDURE returnTableTypeData
GO
IF EXISTS (SELECT * FROM sys.types WHERE is_table_type = 1 AND name = 'myTableType')
DROP TYPE myTableType
GO
/****** Create the type that I'll pass into the proc and return from it ******/
CREATE TYPE [dbo].[myTableType] AS TABLE(
[someInt] [int] NULL,
[somenVarChar] [nvarchar](100) NULL
)
GO
CREATE PROC returnTableTypeData
#someInputInt INT,
#myInputTable myTableType READONLY --Must be readonly because
AS
BEGIN
--Return the subset of data consistent with the type
SELECT
*
FROM
#myInputTable
WHERE
someInt < #someInputInt
END
GO
DECLARE #myInputTableOrig myTableType
DECLARE #myUpdatedTable myTableType
INSERT INTO #myInputTableOrig ( someInt,somenVarChar )
VALUES ( 0, N'Value 0' ), ( 1, N'Value 1' ), ( 2, N'Value 2' )
INSERT INTO #myUpdatedTable EXEC returnTableTypeData #someInputInt=1, #myInputTable=#myInputTableOrig
SELECT * FROM #myUpdatedTable
DROP PROCEDURE returnTableTypeData
GO
DROP TYPE myTableType
GO
Consider creating a function which can return a table and be used in a query.
https://msdn.microsoft.com/en-us/library/ms186755.aspx
The main difference between a function and a procedure is that a function makes no changes to any table. It only returns a value.
In this example I'm creating a query to give me the counts of all the columns in a given table which aren't null or empty.
There are probably many ways to clean this up. But it illustrates a function well.
USE Northwind
CREATE FUNCTION usp_listFields(#schema VARCHAR(50), #table VARCHAR(50))
RETURNS #query TABLE (
FieldName VARCHAR(255)
)
BEGIN
INSERT #query
SELECT
'SELECT ''' + #table+'~'+RTRIM(COLUMN_NAME)+'~''+CONVERT(VARCHAR, COUNT(*)) '+
'FROM '+#schema+'.'+#table+' '+
' WHERE isnull("'+RTRIM(COLUMN_NAME)+'",'''')<>'''' UNION'
FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = #table and TABLE_SCHEMA = #schema
RETURN
END
Then executing the function with
SELECT * FROM usp_listFields('Employees')
produces a number of rows like:
SELECT 'Employees~EmployeeID~'+CONVERT(VARCHAR, COUNT(*)) FROM dbo.Employees WHERE isnull("EmployeeID",'')<>'' UNION
SELECT 'Employees~LastName~'+CONVERT(VARCHAR, COUNT(*)) FROM dbo.Employees WHERE isnull("LastName",'')<>'' UNION
SELECT 'Employees~FirstName~'+CONVERT(VARCHAR, COUNT(*)) FROM dbo.Employees WHERE isnull("FirstName",'')<>'' UNION
You can use an out parameter instead of the return value if you want both a result set and a return value
CREATE PROCEDURE proc_name
#param int out
AS
BEGIN
SET #param = value
SELECT ... FROM [Table] WHERE Condition
END
GO
I had a similar situation and solved by using a temp table inside the procedure, with the same fields being returned by the original Stored Procedure:
CREATE PROCEDURE mynewstoredprocedure
AS
BEGIN
INSERT INTO temptable (field1, field2)
EXEC mystoredprocedure #param1, #param2
select field1, field2 from temptable
-- (mystoredprocedure returns field1, field2)
END
The Status Value being returned by a Stored Procedure can only be an INT datatype. You cannot return other datatypes in the RETURN statement.
From Lesson 2: Designing Stored Procedures:
Every stored procedure can return an integer value known as the
execution status value or return code.
If you still want a table returned from the SP, you'll either have to work the record set returned from a SELECT within the SP or tie into an OUTPUT variable that passes an XML datatype.
HTH,
John
Though this question is very old but as a new in Software Development I can't stop my self to share what I have learnt :D
Creation of Stored Procedure:
CREATE PROC usp_ValidateUSer
(
#UserName nVARCHAR(50),
#Password nVARCHAR(50)
)
AS
BEGIN
IF EXISTS(SELECT '#' FROM Users WHERE Username=#UserName AND Password=#Password)
BEGIN
SELECT u.UserId, u.Username, r.UserRole
FROM Users u
INNER JOIN UserRoles r
ON u.UserRoleId=r.UserRoleId
END
END
Execution of Stored Procedure:
(If you want to test the execution of Stored Procedure in SQL)
EXEC usp_ValidateUSer #UserName='admin', #Password='admin'
The Output:
create procedure PSaleCForms
as
begin
declare
#b varchar(9),
#c nvarchar(500),
#q nvarchar(max)
declare #T table(FY nvarchar(9),Qtr int,title nvarchar (max),invoicenumber nvarchar(max),invoicedate datetime,sp decimal 18,2),grandtotal decimal(18,2))
declare #data cursor
set #data= Cursor
forward_only static
for
select x.DBTitle,y.CurrentFinancialYear from [Accounts Manager].dbo.DBManager x inner join [Accounts Manager].dbo.Accounts y on y.DBID=x.DBID where x.cfy=1
open #data
fetch next from #data
into #c,#b
while ##FETCH_STATUS=0
begin
set #q=N'Select '''+#b+''' [fy], case cast(month(i.invoicedate)/3.1 as int) when 0 then 4 else cast(month(i.invoicedate)/3.1 as int) end [Qtr], l.title,i.invoicenumber,i.invoicedate,i.sp,i.grandtotal from ['+#c+'].dbo.invoicemain i inner join ['+#c+'].dbo.ledgermain l on l.ledgerid=i.ledgerid where (sp=0 or stocktype=''x'') and invoicetype=''DS'''
insert into #T exec [master].dbo.sp_executesql #q
fetch next from #data
into #c,#b
end
close #data
deallocate #data
select * from #T
return
end
Here's an example of a SP that both returns a table and a return value. I don't know if you need the return the "Return Value" and I have no idea about MATLAB and what it requires.
CREATE PROCEDURE test
AS
BEGIN
SELECT * FROM sys.databases
RETURN 27
END
--Use this to test
DECLARE #returnval int
EXEC #returnval = test
SELECT #returnval
I have a very complicated table I'd like to take a temporary backup of whilst I make some changes. Normally, I'd just do the following:
SELECT *
INTO temp_User
FROM dbo.[User] AS u
Unfortunately I'm using Azure, and it appears this isn't supported:
Msg 40510, Level 16, State 1, Line 2 Statement 'SELECT INTO' is not
supported in this version of SQL Server.
Is there a way to re-create this feature into a function, potentially? I could do this by scripting the table, creating it and then inserting data using a select statement but given how frequently I use Azure, and how many databases I need to work on in this area this is very unwieldy.
Azure requires a clustered index on all tables, therefore SELECT INTO is not supported.
You'll have to:
CREATE TABLE temp_User () --fill in table structure
INSERT INTO temp_User
SELECT *
FROM dbo.[User]
To script table easily you can write your own or use one of the answers to this question:
Script CREATE Table SQL Server
Update: As Jordan B pointed out, V12 will include support for heaps (no clustered index requirement) which means SELECT INTO will work. At the moment V12 Preview is available, Microsoft of course only recommends upgrading with test databases.
The new Azure DB Update preview has this problem resolved:
The V12 preview enables you to create a table that has no clustered
index. This feature is especially helpful for its support of the T-SQL
SELECT...INTO statement which creates a table from a query result.
http://azure.microsoft.com/en-us/documentation/articles/sql-database-preview-whats-new/
Unfortunately it cant be done. Here is how I worked around it:
Open SQL Server Management Studio
Right click on the table
Select Script as ... Create Table
Edit the generated script to change the table name to what you specified in your query
Execute your query
INSERT INTO temp_User
SELECT * FROM dbo.[User]
You can try the above. It's basically a select that is applied to an insert statement
http://blog.sqlauthority.com/2011/08/10/sql-server-use-insert-into-select-instead-of-cursor/
Lets assume you have a table with Id, Column1 and Column2. Then this could be your solution
CREATE TABLE YourTableName_TMP ....
GO
SET IDENTITY_INSERT YourTableName_TMP ON
GO
INSERT INTO YourTableName_TMP
([Id] ,[Column1] ,[Column2])
SELECT [Id] ,[Column1] ,[Column2]
FROM
(
SELECT *
FROM
(
SELECT [Id] ,[Column1] ,[Column2] ROW_NUMBER() OVER(ORDER BY ID DESC) AS RowNum
FROM YourTableName
)
WHERE RowNum BETWEEN 0 AND 500000
)
GO
SET IDENTITY_INSERT YourTableName_TMP OFF
GO
First you create a temporary table and then you insert rows windowed. It's a mess, I know. My experiences are, that executing this using SQL Server Management Studio from a client makes approximately 200.000 rows a minute.
As wrote above - you need to rewrite your query from using select into to create table like
It is my sample. Was :
select emrID, displayName --select into
into #tTable
from emrs
declare #emrid int
declare #counter int = 1
declare #displayName nvarchar(max)
while exists (select * from #tTable)
begin
-- some business logic
select top 1 #displayName = displayname
from #tTable
group by displayname
update emrs set groupId = #counter where #displayName = displayname
delete #tTable
where #displayName = displayname
set #counter = #counter + 1
end
drop table #tTable
Modified :
CREATE TABLE #tTable ([displayName] nvarchar(max)) --create table
INSERT INTO #tTable -- insert to next select :
select displayName
from emrs
declare #emrid int
declare #counter int = 1
declare #displayName nvarchar(max)
while exists (select * from #tTable)
begin
-- some business logic
select top 1 #displayName = t.displayName
from #tTable as t
group by t.displayname
update emrs set groupId = #counter where #displayName = displayname
delete #tTable
where #displayName = displayname
set #counter = #counter + 1
end
drop table #tTable
Do not forget to drop your temp table.
Also, you can find more simple example with description here :
http://www.dnnsoftware.com/wiki/statement-select-into-is-not-supported-in-this-version-of-sql-server
I'd like to pass a table as a parameter into a scaler UDF.
I'd also prefer to restrict the parameter to tables with only one column. (optional)
Is this possible?
EDIT
I don't want to pass a table name, I'd like to pass the table of data (as a reference I presume)
EDIT
I would want my Scaler UDF to basically take a table of values and return a CSV list of the rows.
IE
col1
"My First Value"
"My Second Value"
...
"My nth Value"
would return
"My First Value, My Second Value,... My nth Value"
I'd like to do some filtering on the table though, IE ensuring that there are no nulls and to ensure there are no duplicates. I was expecting something along the lines of:
SELECT dbo.MyFunction(SELECT DISTINCT myDate FROM myTable WHERE myDate IS NOT NULL)
You can, however no any table. From documentation:
For Transact-SQL functions, all data
types, including CLR user-defined
types and user-defined table types,
are allowed except the timestamp data
type.
You can use user-defined table types.
Example of user-defined table type:
CREATE TYPE TableType
AS TABLE (LocationName VARCHAR(50))
GO
DECLARE #myTable TableType
INSERT INTO #myTable(LocationName) VALUES('aaa')
SELECT * FROM #myTable
So what you can do is to define your table type, for example TableType and define the function which takes the parameter of this type. An example function:
CREATE FUNCTION Example( #TableName TableType READONLY)
RETURNS VARCHAR(50)
AS
BEGIN
DECLARE #name VARCHAR(50)
SELECT TOP 1 #name = LocationName FROM #TableName
RETURN #name
END
The parameter has to be READONLY. And example usage:
DECLARE #myTable TableType
INSERT INTO #myTable(LocationName) VALUES('aaa')
SELECT * FROM #myTable
SELECT dbo.Example(#myTable)
Depending on what you want achieve you can modify this code.
EDIT:
If you have a data in a table you may create a variable:
DECLARE #myTable TableType
And take data from your table to the variable
INSERT INTO #myTable(field_name)
SELECT field_name_2 FROM my_other_table
Unfortunately, there is no simple way in SQL Server 2005. Lukasz' answer is correct for SQL Server 2008 though and the feature is long overdue
Any solution would involve temp tables, or passing in xml/CSV and parsing in the UDF. Example: change to xml, parse in udf
DECLARE #psuedotable xml
SELECT
#psuedotable = ...
FROM
...
FOR XML ...
SELECT ... dbo.MyUDF (#psuedotable)
What do you want to do in the bigger picture though? There may be another way to do this...
Edit: Why not pass in the query as a string and use a stored proc with output parameter
Note: this is an untested bit of code, and you'd need to think about SQL injection etc. However, it also satisfies your "one column" requirement and should help you along
CREATE PROC dbo.ToCSV (
#MyQuery varchar(2000),
#CSVOut varchar(max)
)
AS
SET NOCOUNT ON
CREATE TABLE #foo (bar varchar(max))
INSERT #foo
EXEC (#MyQuery)
SELECT
#CSVOut = SUBSTRING(buzz, 2, 2000000000)
FROM
(
SELECT
bar -- maybe CAST(bar AS varchar(max))??
FROM
#foo
FOR XML PATH (',')
) fizz(buzz)
GO
Step 1: Create a Type as Table with name TableType that will accept a table having one varchar column
create type TableType
as table ([value] varchar(100) null)
Step 2: Create a function that will accept above declared TableType as Table-Valued Parameter and String Value as Separator
create function dbo.fn_get_string_with_delimeter (#table TableType readonly,#Separator varchar(5))
returns varchar(500)
As
begin
declare #return varchar(500)
set #return = stuff((select #Separator + value from #table for xml path('')),1,1,'')
return #return
end
Step 3: Pass table with one varchar column to the user-defined type TableType and ',' as separator in the function
select dbo.fn_get_string_with_delimeter(#tab, ',')
Cutting to the bottom line, you want a query like SELECT x FROM y to be passed into a function that returns the values as a comma separated string.
As has already been explained you can do this by creating a table type and passing a UDT into the function, but this needs a multi-line statement.
You can pass XML around without declaring a typed table, but this seems to need a xml variable which is still a multi-line statement i.e.
DECLARE #MyXML XML = (SELECT x FROM y FOR XML RAW);
SELECT Dbo.CreateCSV(#MyXml);
The "FOR XML RAW" makes the SQL give you it's result set as some xml.
But you can bypass the variable using Cast(... AS XML). Then it's just a matter of some XQuery and a little concatenation trick:
CREATE FUNCTION CreateCSV (#MyXML XML)
RETURNS VARCHAR(MAX)
BEGIN
DECLARE #listStr VARCHAR(MAX);
SELECT
#listStr =
COALESCE(#listStr+',' ,'') +
c.value('#Value[1]','nvarchar(max)')
FROM #myxml.nodes('/row') as T(c)
RETURN #listStr
END
GO
-- And you call it like this:
SELECT Dbo.CreateCSV(CAST(( SELECT x FROM y FOR XML RAW) AS XML));
-- Or a working example
SELECT Dbo.CreateCSV(CAST((
SELECT DISTINCT number AS Value
FROM master..spt_values
WHERE type = 'P'
AND number <= 20
FOR XML RAW) AS XML));
As long as you use FOR XML RAW all you need do is alias the column you want as Value, as this is hard coded in the function.
PASSING TABLE AS PARAMETER IN STORED PROCEDURE
Step 1:
CREATE TABLE [DBO].T_EMPLOYEES_DETAILS
(
Id int,
Name nvarchar(50),
Gender nvarchar(10),
Salary int
)
Step 2:
CREATE TYPE EmpInsertType AS TABLE
(
Id int,
Name nvarchar(50),
Gender nvarchar(10),
Salary int
)
Step 3:
/* Must add READONLY keyword at end of the variable */
CREATE PROC PRC_EmpInsertType
#EmployeeInsertType EmpInsertType READONLY
AS
BEGIN
INSERT INTO [DBO].T_EMPLOYEES_DETAILS
SELECT * FROM #EmployeeInsertType
END
Step 4:
DECLARE #EmployeeInsertType EmpInsertType
INSERT INTO #EmployeeInsertType VALUES(1,'John','Male',50000)
INSERT INTO #EmployeeInsertType VALUES(2,'Praveen','Male',60000)
INSERT INTO #EmployeeInsertType VALUES(3,'Chitra','Female',45000)
INSERT INTO #EmployeeInsertType VALUES(4,'Mathy','Female',6600)
INSERT INTO #EmployeeInsertType VALUES(5,'Sam','Male',50000)
EXEC PRC_EmpInsertType #EmployeeInsertType
=======================================
SELECT * FROM T_EMPLOYEES_DETAILS
OUTPUT
1 John Male 50000
2 Praveen Male 60000
3 Chitra Female 45000
4 Mathy Female 6600
5 Sam Male 50000
I've been dealing with a very similar problem and have been able to achieve what I was looking for, even though I'm using SQL Server 2000. I know it is an old question, but think its valid to post here the solution since there should be others like me that use old versions and still need help.
Here's the trick: SQL Server won't accept passing a table to a UDF, nor you can pass a T-SQL query so the function creates a temp table or even calls a stored procedure to do that. So, instead, I've created a reserved table, which I called xtList. This will hold the list of values (1 column, as needed) to work with.
CREATE TABLE [dbo].[xtList](
[List] [varchar](1000) NULL
) ON [PRIMARY]
Then, a stored procedure to populate the list. This is not strictly necessary, but I think is very usefull and best practice.
-- =============================================
-- Author: Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE PROCEDURE [dbo].[xpCreateList]
#ListQuery varchar(2000)
AS
BEGIN
SET NOCOUNT ON;
DELETE FROM xtList
INSERT INTO xtList
EXEC(#ListQuery)
END
Now, just deal with the list in any way you want, using the xtList. You can use in a procedure (for executing several T-SQL commands), scalar functions (for retrieving several strings) or multi-statement table-valued functions (retrieves the strings but like it was inside a table, 1 string per row). For any of that, you'll need cursors:
DECLARE #Item varchar(100)
DECLARE cList CURSOR DYNAMIC
FOR (SELECT * FROM xtList WHERE List is not NULL)
OPEN cList
FETCH FIRST FROM cList INTO #Item
WHILE ##FETCH_STATUS = 0 BEGIN
<< desired action with values >>
FETCH NEXT FROM cList INTO #Item
END
CLOSE cList
DEALLOCATE cList
The desired action would be as follows, depending on which type of object created:
Stored procedures
-- =============================================
-- Author: Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE PROCEDURE [dbo].[xpProcreateExec]
(
#Cmd varchar(8000),
#ReplaceWith varchar(1000)
)
AS
BEGIN
DECLARE #Query varchar(8000)
<< cursor start >>
SET #Query = REPLACE(#Cmd,#ReplaceWith,#Item)
EXEC(#Query)
<< cursor end >>
END
/* EXAMPLES
(List A,B,C)
Query = 'SELECT x FROM table'
with EXEC xpProcreateExec(Query,'x') turns into
SELECT A FROM table
SELECT B FROM table
SELECT C FROM table
Cmd = 'EXEC procedure ''arg''' --whatchout for wrong quotes, since it executes as dynamic SQL
with EXEC xpProcreateExec(Cmd,'arg') turns into
EXEC procedure 'A'
EXEC procedure 'B'
EXEC procedure 'C'
*/
Scalar functions
-- =============================================
-- Author: Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE FUNCTION [dbo].[xfProcreateStr]
(
#OriginalText varchar(8000),
#ReplaceWith varchar(1000)
)
RETURNS varchar(8000)
AS
BEGIN
DECLARE #Result varchar(8000)
SET #Result = ''
<< cursor start >>
SET #Result = #Result + REPLACE(#OriginalText,#ReplaceWith,#Item) + char(13) + char(10)
<< cursor end >>
RETURN #Result
END
/* EXAMPLE
(List A,B,C)
Text = 'Access provided for user x'
with "SELECT dbo.xfProcreateStr(Text,'x')" turns into
'Access provided for user A
Access provided for user B
Access provided for user C'
*/
Multi-statement table-valued functions
-- =============================================
-- Author: Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE FUNCTION [dbo].[xfProcreateInRows]
(
#OriginalText varchar(8000),
#ReplaceWith varchar(1000)
)
RETURNS
#Texts TABLE
(
Text varchar(2000)
)
AS
BEGIN
<< cursor start >>
INSERT INTO #Texts VALUES(REPLACE(#OriginalText,#ReplaceWith,#Item))
<< cursor end >>
END
/* EXAMPLE
(List A,B,C)
Text = 'Access provided for user x'
with "SELECT * FROM dbo.xfProcreateInRow(Text,'x')" returns rows
'Access provided for user A'
'Access provided for user B'
'Access provided for user C'
*/
To obtain the column count on a table, use this:
select count(id) from syscolumns where id = object_id('tablename')
and to pass a table to a function, try XML as show here:
create function dbo.ReadXml (#xmlMatrix xml)
returns table
as
return
( select
t.value('./#Salary', 'integer') as Salary,
t.value('./#Age', 'integer') as Age
from #xmlMatrix.nodes('//row') x(t)
)
go
declare #source table
( Salary integer,
age tinyint
)
insert into #source
select 10000, 25 union all
select 15000, 27 union all
select 12000, 18 union all
select 15000, 36 union all
select 16000, 57 union all
select 17000, 44 union all
select 18000, 32 union all
select 19000, 56 union all
select 25000, 34 union all
select 7500, 29
--select * from #source
declare #functionArgument xml
select #functionArgument =
( select
Salary as [row/#Salary],
Age as [row/#Age]
from #source
for xml path('')
)
--select #functionArgument as [#functionArgument]
select * from readXml(#functionArgument)
/* -------- Sample Output: --------
Salary Age
----------- -----------
10000 25
15000 27
12000 18
15000 36
16000 57
17000 44
18000 32
19000 56
25000 34
7500 29
*/
create table Project (ProjectId int, Description varchar(50));
insert into Project values (1, 'Chase tail, change directions');
insert into Project values (2, 'ping-pong ball in clothes dryer');
create table ProjectResource (ProjectId int, ResourceId int, Name varchar(15));
insert into ProjectResource values (1, 1, 'Adam');
insert into ProjectResource values (1, 2, 'Kerry');
insert into ProjectResource values (1, 3, 'Tom');
insert into ProjectResource values (2, 4, 'David');
insert into ProjectResource values (2, 5, 'Jeff');
SELECT *,
(SELECT Name + ' ' AS [text()]
FROM ProjectResource pr
WHERE pr.ProjectId = p.ProjectId
FOR XML PATH (''))
AS ResourceList
FROM Project p
-- ProjectId Description ResourceList
-- 1 Chase tail, change directions Adam Kerry Tom
-- 2 ping-pong ball in clothes dryer David Jeff
The following will enable you to quickly remove the duplicate,null values and return only the valid one as list.
CREATE TABLE DuplicateTable (Col1 INT)
INSERT INTO DuplicateTable
SELECT 8
UNION ALL
SELECT 1--duplicate
UNION ALL
SELECT 2 --duplicate
UNION ALL
SELECT 1
UNION ALL
SELECT 3
UNION ALL
SELECT 4
UNION ALL
SELECT 5
UNION
SELECT NULL
GO
WITH CTE (COl1,DuplicateCount)
AS
(
SELECT COl1,
ROW_NUMBER() OVER(PARTITION BY COl1 ORDER BY Col1) AS DuplicateCount
FROM DuplicateTable
WHERE (col1 IS NOT NULL)
)
SELECT COl1
FROM CTE
WHERE DuplicateCount =1
GO
CTE are valid in SQL 2005 , you could then store the values in a temp table and use it with your function.
you can do something like this
/* CREATE USER DEFINED TABLE TYPE */
CREATE TYPE StateMaster AS TABLE
(
StateCode VARCHAR(2),
StateDescp VARCHAR(250)
)
GO
/*CREATE FUNCTION WHICH TAKES TABLE AS A PARAMETER */
CREATE FUNCTION TableValuedParameterExample(#TmpTable StateMaster READONLY)
RETURNS VARCHAR(250)
AS
BEGIN
DECLARE #StateDescp VARCHAR(250)
SELECT #StateDescp = StateDescp FROM #TmpTable
RETURN #StateDescp
END
GO
/*CREATE STORED PROCEDURE WHICH TAKES TABLE AS A PARAMETER */
CREATE PROCEDURE TableValuedParameterExample_SP
(
#TmpTable StateMaster READONLY
)
AS
BEGIN
INSERT INTO StateMst
SELECT * FROM #TmpTable
END
GO
BEGIN
/* DECLARE VARIABLE OF TABLE USER DEFINED TYPE */
DECLARE #MyTable StateMaster
/* INSERT DATA INTO TABLE TYPE */
INSERT INTO #MyTable VALUES('11','AndhraPradesh')
INSERT INTO #MyTable VALUES('12','Assam')
/* EXECUTE STORED PROCEDURE */
EXEC TableValuedParameterExample_SP #MyTable
GO
For more details check this link: http://sailajareddy-technical.blogspot.in/2012/09/passing-table-valued-parameter-to.html