I have a problem here.
DB: oracle 9i
I want to save data changes after I execute UPDATE script on my table,
in that log I want to compare old values with new values.
How can i do this.
thanks for helping me :)
write simple trigger, by using :OLD and :NEW you can get the value of both new and old value of the table
create or replace
trigger tg_name
after UPDATE ON table_name
for each row
BEGIN
IF :NEW.column1 = :OLD.column1 THEN
-- any statement
END IF;
-- you can log the old and new value by inserting into log table's too..
END;
You can do a trigger on after update and you can use :old and :new values for each field you want.
In case, if you need only updated values you can use RETURNING clause.
like
UPDATE <table> SET (c1) = (v1), (c2) = (v2), (cn) = (vn)
WHERE <condition>
RETURNING <expression> INTO <variables>
http://psoug.org/definition/RETURNING.htm
Related
I am trying to make an upsert trigger on ORACLE via PL/SQL by checking some examples, i am doing fine, i think it is the last step i should only configure. My requirement is that :
A system that will insert to that field will remain one column always null, so i will read column value from another table, then upsert it with inclusion of that value.
d2c_region_locale_config holds d2c_is_active value, so i firstly read that value regarding to locale condition then trigger inserts or updates to table with addition of this value on active_for_d2c column.(for update i am using locale and country columns as it is shown on where clause, they are not PK but has not null condition)
So i've created this trigger:
CREATE OR REPLACE TRIGGER BL_PIM_LOCALE_COUNTRY
BEFORE INSERT OR UPDATE ON PIM_LOCALE_COUNTRY REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
l_active_for_d2c INTEGER;
BEGIN
if :NEW.active_for_d2c is null then
DELETE from pim_locale_country where active_for_d2c is null;
select distinct(d2c_isactive) into l_active_for_d2c from d2c_region_locale_config where d2c_locale= :NEW.locale;
UPDATE pim_locale_country
SET locale = :NEW.locale, locale_name = :NEW.locale_name,
country = :NEW.country, country_name = :NEW.country_name, isdummy = :NEW.isdummy,
active_for_d2c = l_active_for_d2c, itextpos = :NEW.itextpos, locale_charset = :NEW.locale_charset,
fallback_locale = :NEW.fallback_locale, default_for_lang = :NEW.default_for_lang, opeclang = :NEW.opeclang
where locale = :NEW.locale and country = :NEW.country;
IF ( sql%notfound ) THEN
INSERT INTO PIM_LOCALE_COUNTRY (locale,locale_name,country,country_name,isdummy,active_for_d2c,itextpos,locale_charset,fallback_locale,default_for_lang,opeclang)
VALUES (:NEW.locale, :NEW.locale_name,:NEW.country,:NEW.country_name,:NEW.isdummy,l_active_for_d2c,:NEW.itextpos,:NEW.locale_charset,:NEW.fallback_locale,:NEW.default_for_lang,:NEW.opeclang);
END IF;
end if;
END;
It currently does the job, reads value and inserts or updates the existing locale-country couple for other values. But critical thing is that, table always has one "null" value(Please check screenshot), even that i run delete statement at the beginning on my trigger. So my question would be how to delete, or how to make this approach on trigger side ?
Many thanks for answers!
Trigger before insert doesn't block insert itself, so you insert that record twice. That is, once your trigger done its work (inserted or updated record), oracle will proceed with insert (or update) using values that stand in NEW record of your trigger. If trigger modifies NEW., it will be stored as you changed it, but if trigger inserts something itself, you can get more records.
You can use instead of insert or update triggers, and then oracle will not run its own inserts/updates after trigger finishes.
But more common way for 1-record triggers is to modify fields in NEW, for this case field NEW.d2c_is_active.
It looks like this (possible typos, please check)
CREATE OR REPLACE TRIGGER BL_PIM_LOCALE_COUNTRY
BEFORE INSERT OR UPDATE ON PIM_LOCALE_COUNTRY REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
if :NEW.active_for_d2c is null then
select d2c_isactive
into :NEW.active_for_d2c
from d2c_region_locale_config
where d2c_locale= :NEW.locale and rownum<=1;
end if;
END;
I'm developing a small library database and I don't want to allow someone to update someone's ID. But I need to use AFTER UPDATE and FOR EACH STATEMENT (which I'm told is Oracle's default). So, basically, if someone updates the customer info and alter his/her ID or mistypes it, the trigger will automatically update it again to the old value. The problem is that Oracle won't let me use :NEW and :OLD when using FOR EACH STATEMENT. Are there any workarounds to this issue?
CREATE OR REPLACE TRIGGER alter_id_trigger
AFTER UPDATE ON CUSTOMER
BEGIN
UPDATE CUSTOMER SET ID = :OLD.ID
WHERE ID = :NEW.ID;
END;
Thank you!
Use the below code for trigger.
Changes done:
Using BEFORE UPDATE instead of AFTER UPDATE.
Setting the value of ID to what it was previously. (The ID Field would never be modified)
CREATE OR REPLACE TRIGGER ALTER_ID_TRIGGER
BEFORE UPDATE ON CUSTOMER
BEGIN
SET :NEW.ID = :OLD.ID
END;
Note: With BEFORE UPDATE:
You can not create a BEFORE trigger on a view.
You can update the :NEW values.
You can not update the :OLD values.
I think you want a before update trigger:
CREATE OR REPLACE TRIGGER alter_id_trigger
BEFORE UPDATE ON CUSTOMER
BEGIN
SET :NEW.ID = :OLD.ID
END;
You could test to see if the value is being changed, but that seems unnecessary.
I've created a trigger as follows:
create or replace trigger "PASSENGERS_BACKUP_T1"
after
insert or update or delete on "PASSENGERS"
for each row
begin
if :NEW."P_ID" is NOT null then
INSERT INTO PASSENGERS_BACKUP(
PB_ID,
PB_FIRST_NAME,
PB_LAST_NAME,
PB_STREET_ADDRESS1,
PB_STREET_ADDRESS2,
PB_CITY,
PB_STATE,
PB_POSTAL_CODE,
PB_EMAIL,
PB_PHONE_NUMBER1,
PB_PHONE_NUMBER2,
PB_URL,
PB_CREDIT_LIMIT,
PB_TAGS)
VALUES (
:new.P_ID,
:new.P_FIRST_NAME,
:new.P_LAST_NAME,
:new.P_STREET_ADDRESS1,
:new.P_STREET_ADDRESS2,
:new.P_CITY,
:new.P_STATE,
:new.P_POSTAL_CODE,
:new.P_EMAIL,
:new.PHONE_NUMBER1,
:new.PHONE_NUMBER1,
:new.URL,
:new.CREDIT_LIMIT,
:new.TAGS);
end if;
end;
now, when I update​ an existing row in "passengers" table as per the above trigger another new row is getting added in "passengers_backup" table instead I would like to update the existing row whenever an update is done in "passengers" table rows. As, well If I delete a row in "Passengers" table, if that row exists in 'Passengers_backup' table it should also get deleted. How can I acheive this?
Thanks in advance.
For solving your problem you need to use trigger with corresponding SQL statement for each action: insert, update, delete. As variant you can use something like this (Note, I left only two columns from your example for readability, so modify your trigger as you need):
create or replace trigger "PASSENGERS_BACKUP_TIUD"
after insert or update or delete on "PASSENGER"
for each row
begin
if inserting then
insert into "PASSENGER_BACKUP" (pb_id, pb_first_name)
values (:NEW.pb_id, :NEW.pb_first_name);
elsif updating then
update "PASSENGER_BACKUP"
set pb_id=:NEW.pb_id, pb_first_name=:NEW.pb_first_name
where pb_id=:NEW.pb_id;
elsif deleting then
delete from "PASSENGER_BACKUP"
where pb_id=:OLD.pb_id;
end if;
end;
Also you can see work of this trigger in action on SQL Fiddle.
I am writing an INSTEAD OF UPDATE trigger and I want to identify what columns has been given to the WHERE clause of the UPDATE statement that triggers the trigger.
For example,
Let's say that we have the table below
table_name
--COL1
--COL2
--COL3
--COL4
I want, when an update is performed
e.g.UPDATE table_name SET COL1=VAL1,COL2=VAL2 WHERE COL3=VAL3
to be able to say in my trigger
CREATE or replace TRIGGER DEVICES_VIEW_TR
INSTEAD OF UPDATE ON DEVICES_VW
BEGIN
IF (COL3 has been given in the where clause) THEN
variable=getValueOf(COL3);
ELSEIF (COL4 has been given in the where clause) THEN
variable=getValueOf(COL4);
END IF;
END;
/
Can this be done?
Thanks
You can use the UPDATING('column name') in your trigger:
-- in INSTEAD OF trigger body:
IF updating('COL1') THEN
-- some operation
END IF;
Check this for an example: Example of using UPDATING
You could use the NEW and OLD pseudorecords and run a comparison of the values
if :NEW.COL3 <> :OLD.COL3 THEN ...
Triggers don't know anything about the statement that invoked them, so you'll have to use some kind of out-of-band signalling, e.g. change your application to set some globals in a database package, or use an application context.
I have table A and there is a column name COL_A.
I want that if someone change the value, lets say from 1 to 'X' (not costant) that the trigger will change it back from 'X' to 1.
SQLite does not support changing the new column values.
The only way to change a column in a trigger would be to run an UPDATE command,
but that would run the trigger again.
What you can do is to prevent changing the column in the first place:
CREATE TRIGGER IF NOT EXISTS prevent_col_a_change
BEFORE UPDATE OF col_a ON a
BEGIN
SELECT RAISE(ABORT, 'COL_A must not be changed');
END;
UPDATE trigger is a good solution for your case. Just set old value to the new value, that will lead to behaviour you want.
For example:
CREATE OR REPLACE TRIGGER orders_before_update
BEFORE UPDATE
ON orders
FOR EACH ROW
BEGIN
:new.CreatedAt:= :old.CreatedAt;
END;