I have right now this in a script and want to have it in a msbuild instead.
msbuild /t:Build;PipelinePreDeployCopyAllFilesToOneFolder XXXXX\XXXX.XXX.xxx\XXXXX.XXXX.XXXXX1.csproj /p:Configuration="Release";_PackageTempDir=....\Deploy\XXXX1
msbuild /t:Build;PipelinePreDeployCopyAllFilesToOneFolder XXXXX\XXXX.XXX.xxx\XXXXX.XXXX.XXXXX2.csproj /p:Configuration="Release";_PackageTempDir=....\Deploy\XXXX2
How would this be written in a msbuild script? I only have managed to do it with one build but to create diffrent folders in the Deploy folder I havent been able to do.
Could someone teach me?
You can specify OutDir (new projects) or OutputPath (some old project types) as Properties when you call msbuild task to build your project. Or whatever property you want, like your "_PackageTempDir"
Something like this:
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="BatchMyProjects" ToolsVersion="4.0">
<ItemGroup>
<BuildMyProjects Include="XXXX-Project-1" />
<BuildMyProjects Include="XXXX-Project-2" />
</ItemGroup>
<Target Name="BatchMyProjects" >
<ItemGroup>
<ProjectsToBuild Condition="Exists('SomeSourcePath\%(BuildMyProjects.Identity)/%(BuildMyProjects.Identity).csproj')">
<ProjectName>SomeSourcePath/%(BuildMyProjects.Identity)/%(BuildMyProjects.Identity).csproj</ProjectName>
<PublishSubFolder>%(BuildMyProjects.Identity)</PublishSubFolder>
</ProjectsToBuild>
</ItemGroup>
<MSBuild Projects="%(ProjectsToBuild.ProjectName)" Targets="Build;PipelinePreDeployCopyAllFilesToOneFolder"
Properties="Configuration=Release;
OutDir=SomePathToDeploy/Deploy/%(ProjectsToBuild.PublishSubFolder)/;
OutputPath= SomePathToDeploy/Deploy/%(ProjectsToBuild.PublishSubFolder)/;
_PackageTempDir=SomePathToDeploy/Deploy/%(ProjectsToBuild.PublishSubFolder)/
" />
</Target>
</Project>
Also I created gist for this same example
This do work but that seems abit strange. I rateher have it to work as you mentioned
<Target Name="testar" >
<MSBuild Projects="..\xxxxxx\xxxxxx1.csproj" Targets="Build;PipelinePreDeployCopyAllFilesToOneFolder" Properties="Configuration=Release;_PackageTempDir=../../Deploy/xxx1/"/>
<MSBuild Projects="..\xxxx\xxxxxx2.csproj" Targets="Build;PipelinePreDeployCopyAllFilesToOneFolder" Properties="Configuration=Release;_PackageTempDir=../../Deploy/xxx2/"/>
</Target>
Related
We have several repositories and each one has its own .editorconfig. Obviously, these are not synced, which is why I would like to distribute the .editorconfig from our framework solution (along with other files) via NuGet package to all our repositories/solutions and copy it via a simple Copy build Task to the solution directory.
I attempted to do the following:
Create a project "EditorConfigDistribution", which is supposed to contain the master .editorconfig file.
<Project Sdk="Microsoft.NET.Sdk">
...
<PropertyGroup>
<TargetFramework>netstandard2.0</TargetFramework>
<NoDefaultExcludes>true</NoDefaultExcludes>
</PropertyGroup>
<ItemGroup>
<Content Include=".editorconfig">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<Pack>true</Pack>
<PackageCopyToOutput>false</PackageCopyToOutput>
<PackagePath>contentFiles\any\any\content</PackagePath>
</Content>
</ItemGroup>
</Project>
This all works as expected and I do get the desired .editorconfig file in my project from the other solutions and it is referenced as shortcut in a folder content/.editorconfig (see EditorConfigConsumer Project Structure).
The file is only a reference to C:\Users\<user>\.nuget\packages\editorconfigdistribution\1.0.0\contentFiles\any\any\content\.editorconfig.
Now, I want to copy that .editorconfig file via build task:
<Project Sdk="Microsoft.NET.Sdk">
...
<ItemGroup>
<PackageReference Include="EditorConfigDistribution" Version="1.0.0">
</PackageReference>
</ItemGroup>
<Target Name="CopyEditorConfig" BeforeTargets="BeforeBuild">
<ItemGroup>
<EditorConfigFileToCopy Include="$(MSBuildProjectDirectory)\content\.editorconfig" />
</ItemGroup>
<Copy SourceFiles="#(EditorConfigFileToCopy)" DestinationFolder="$(MSBuildProjectDirectory)\.." SkipUnchangedFiles="true" UseHardlinksIfPossible="false" />
</Target>
</Project>
However, I do get the following error:
Error MSB3030: Could not copy the file "C:\Users\weberma9\source\repos\<some_path>\EditorConfigConsumer\content\.editorconfig" because it was not found. (20, 5)
I can understand that the file (since it is a shortcut) cannot be found, but I just cannot figure out a way to reference that shortcut correctly in my build task.
What do I need to change in that line <EditorConfigFileToCopy Include="$(MSBuildProjectDirectory)\content\.editorconfig" />?
Of course, if you have better approaches to my general problem - I'm glad to hear about it.
I was able to find a solution for my problem:
I not only provide the .editorconfig, but also the Copy-Build task via my EditorConfigDistribution project, which looks like this now:
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<TargetFramework>netstandard2.0</TargetFramework>
<NoDefaultExcludes>true</NoDefaultExcludes>
</PropertyGroup>
<ItemGroup>
<None Include="..\..\.editorconfig">
<Link>Rules\.editorconfig</Link>
<Pack>true</Pack>
<PackageCopyToOutput>false</PackageCopyToOutput>
<PackagePath>Rules\</PackagePath>
</None>
</ItemGroup>
<ItemGroup>
<None Include="build\**">
<Pack>true</Pack>
<PackageCopyToOutput>false</PackageCopyToOutput>
<PackagePath>build\</PackagePath>
</None>
</ItemGroup>
</Project>
The .props file is straightforward and due to the convention that <package_id>.props and <package_id>.target are added to projects that consume the package (see Include MSBuild props and targets in a package), it will always be executed before 'BeforeBuild'.
EditorConfigDistribution.props (placed in build folder):
<Project>
<Target Name="CopyEditorConfig" BeforeTargets="BeforeBuild">
<ItemGroup>
<EditorConfigFilesToCopy Include="$(MSBuildThisFileDirectory)..\Rules\.editorconfig" />
</ItemGroup>
<Copy SourceFiles="#(EditorConfigFilesToCopy)" DestinationFolder="$(SolutionDir).." SkipUnchangedFiles="true" UseHardlinksIfPossible="false" />
</Target>
</Project>
How to specify additional assembly reference paths for the MSBuild tasks?
I have following script so far, but can't figure out how to specify additional search paths.
<ItemGroup>
<ProjectsToBuild Include="..\Main\Main.sln" />
</ItemGroup>
<!-- The follwing paths should be added to reference search paths for the build tasks -->
<ItemGroup>
<MyAddRefPath Include="$(MSBuildProjectDirectory)\..\..\Build\Lib1" />
<MyAddRefPath Include="$(MSBuildProjectDirectory)\..\..\Build\Lib2" />
</ItemGroup>
<MSBuild
Projects="#(ProjectsToBuild)"
Properties="Configuration=Debug;OutputPath=$(BuildOutputPath)">
</MSBuild>
UPDATE:
Please show one complete working script which invokes original project, such as an SLN with multiple additional reference paths.
No suggestions on how to improve the project structure please.
I know how to build a good structure, but now it's the task of building an existing piece of crap.
I have finaly figured out how to do it:
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<ItemGroup>
<ProjectsToBuild Include="ConsoleApplication1\ConsoleApplication1.csproj" />
</ItemGroup>
<ItemGroup>
<AdditionalReferencePaths Include="..\Build\ClassLibrary1" />
<AdditionalReferencePaths Include="..\Build\ClassLibrary2" />
</ItemGroup>
<PropertyGroup>
<BuildOutputPath>..\Build\ConsoleApplication1</BuildOutputPath>
</PropertyGroup>
<Target Name="MainBuild">
<PropertyGroup>
<AdditionalReferencePathsProp>#(AdditionalReferencePaths)</AdditionalReferencePathsProp>
</PropertyGroup>
<MSBuild
Projects="ConsoleApplication1\ConsoleApplication1.csproj"
Properties="ReferencePath=$(AdditionalReferencePathsProp);OutputPath=$(BuildOutputPath)"
>
</MSBuild>
</Target>
The property you want to modify is AssemblySearchPaths. See the ResolveAssemblyReference task more information.
<Target Name="AddToSearchPaths">
<CreateProperty Value="x:\path\to\assemblies;$(AssemblySearchPaths)">
<Output PropertyName="AssemblySearchPaths" TaskParameter="Value" />
</CreateProperty>
</Target>
Making use of item groups, as in your example, it would look like:
<Target Name="AddToSearchPaths">
<CreateProperty Value="#(MyAddRefPath);$(AssemblySearchPaths)">
<Output PropertyName="AssemblySearchPaths" TaskParameter="Value" />
</CreateProperty>
</Target>
Looking in %WINDIR%\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets, you can see that the ResolveAssemblyReference Task is executed as part of the ResolveAssemblyReferences target. Thus, you want the newly added target to modify the AssemblySearchPaths property before ResolveAssemblyReferences is executed.
You've stated that you want to be able to modify the assembly search paths without modifying the project files directly. In order to accomplish that requirement you need to set an environment variable that will override the AssemblySearchPaths. With this technique you will need to provide every assembly reference path used by all the projects in the solutions. (Modifying the projects or copies of the projects would be easier. See final comments.)
One technique is to create a batch file that runs your script at sets the environment variable:
set AssemblySearchPaths="C:\Tacos;C:\Burritos;C:\Chalupas"
msbuild whatever.msbuild
Another way is to define a PropertyGroup in your custom msbuild file (otherwise known as the "hook" needed to make this work):
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<ItemGroup>
<ProjectsToBuild Include="..\Main\Main.sln" />
</ItemGroup>
<PropertyGroup>
<AssemblySearchPaths>$(MSBuildProjectDirectory)\..\..\Build\Lib1;$(MSBuildProjectDirectory)\..\..\Build\Lib2</AssemblySearchPaths>
</PropertyGroup>
<Target Name="Build">
<MSBuild Projects="#(ProjectsToBuild)" Properties="AssemblySearchPaths=$(AssemblySearchPaths);Configuration=Debug;OutputPath=$(OutputPath)" />
</Target>
</Project>
Now if it were me, and for whatever unexplained reason I couldn't modify the project files to include the updated references that I am going to build with, I would make copies of the project files, load them into the IDE, and correct the references in my copies. Synching the projects becomes a simple diff/merge operation which is automatic with modern tools like mercurial (heck I'm sure clearcase could manage it too).
...and remember that you don't need to use a target for this, you can use project-scoped properties or items, as...
<ItemGroup>
<MyAddRefPath Include="$(MSBuildProjectDirectory)\..\..\Build\Lib1" />
<MyAddRefPath Include="$(MSBuildProjectDirectory)\..\..\Build\Lib2" />
</ItemGroup>
<PropertyGroup>
<MyAddRefPath>$(MSBuildProjectDirectory)\..\..\Build\Lib3</MyAddRefPath>
<!-- add in the property path -->
<AssemblySearchPaths>$(MyAddRefPath);$(AssemblySearchPaths)</AssemblySearchPaths>
<!-- add in the item paths -->
<AssemblySearchPaths>#(MyAddRefPath);$(AssemblySearchPaths)</AssemblySearchPaths>
</PropertyGroup>
...and if you do need to do this in a target to pick up paths from a dynamically populated item group, use inline properties, not the CreateProperty task (if you are not stuck in v2.0)
<Target Name="AddToSearchPaths">
<PropertyGroup>
<!-- add in the item paths -->
<AssemblySearchPaths>#(MyDynamicAddRefPath);$(AssemblySearchPaths)</AssemblySearchPaths>
</PropertyGroup>
</Target>
In MSBuild v4 one can use functions (like string.replace) on Properties. But how can I use functions on Metadata?
I'd like to use the string.replace function as below:
<Target Name="Build">
<Message Text="#(Files->'%(Filename).Replace(".config","")')" />
</Target>
Unfortunately this outputs as (not quite what I was going for):
log4net.Replace(".config","");ajaxPro.Replace(".config","");appSettings.Replace(".config","");cachingConfiguration20.Replace(".config","");cmsSiteConfiguration.Replace(".config","");dataProductsGraphConfiguration.Replace(".config","");ajaxPro.Replace(".config","");appSettings.Replace(".config","");cachingConfiguration20.Replace(".config","");cmsSiteConfiguration
Any thoughts?
You can do this with a little bit of trickery:
$([System.String]::Copy('%(Filename)').Replace('config',''))
Basically, we call the static method 'Copy' to create a new string (for some reason it doesn't like it if you just try $('%(Filename)'.Replace('.config',''))), then call the replace function on the string.
The full text should look like this:
<Target Name="Build">
<Message Text="#(Files->'$([System.String]::Copy("%(Filename)").Replace(".config",""))')" />
</Target>
Edit: MSBuild 12.0 seems to have broken the above method. As an alternative, we can add a new metadata entry to all existing Files items. We perform the replace while defining the metadata item, then we can access the modified value like any other metadata item.
e.g.
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<ItemGroup>
<Files Include="Alice.jpg"/>
<Files Include="Bob.not-config.gif"/>
<Files Include="Charlie.config.txt"/>
</ItemGroup>
<Target Name="Build">
<ItemGroup>
<!--
Modify all existing 'Files' items so that they contain an entry where we have done our replace.
Note: This needs to be done WITHIN the '<Target>' (it's a requirment for modifying existing items like this
-->
<Files>
<FilenameWithoutConfig>$([System.String]::Copy('%(Filename)').Replace('.config', ''))</FilenameWithoutConfig>
</Files>
</ItemGroup>
<Message Text="#(Files->'%(FilenameWithoutConfig)')" Importance="high" />
</Target>
</Project>
Result:
D:\temp>"c:\Program Files (x86)\MSBuild\12.0\Bin\MSBuild.exe" /nologo test.xml
Build started 2015/02/11 11:19:10 AM.
Project "D:\temp\test.xml" on node 1 (default targets).
Build:
Alice;Bob.not-config;Charlie
Done Building Project "D:\temp\test.xml" (default targets).
I needed to do something similar, the following worked for me.
<Target Name="Build">
<Message Text="#(Files->'%(Filename)'->Replace('.config', ''))" />
</Target>
Those functions works in properties only (as I know). So create target which will perform operation throw batching:
<Target Name="Build"
DependsOnTargets="ProcessFile" />
<Target Name="ProcessFile"
Outputs="%(Files.Identity)">
<PropertyGroup>
<OriginalFileName>%(Files.Filename)</OriginalFileName>
<ModifiedFileName>$(OriginalFileName.Replace(".config",""))</ModifiedFileName>
</PropertyGroup>
<Message Text="$(ModifiedFileName)" Importance="High"/>
</Target>
Do you really need in your example such kind of task? I mean there exists MSBuild Well-known Item Metadata
EDIT: I should specify that this task processes all items in #(Files).
i dont think you can use functions directly with itemgroups and metadata (that would be easy)
However you can use batching:
Taking the ideas from this post:
array-iteration
I was trying to trim an itemgroup to send to a commandline tool (i needed to lose .server off the filename)
<Target Name="ProcessFile" DependsOnTargets="FullPaths">
<ItemGroup>
<Environments Include="$(TemplateFolder)\$(Branch)\*.server.xml"/>
</ItemGroup>
<MSBuild Projects=".\Configure.msbuild"
Properties="CurrentXmlFile=%(Environments.Filename)"
Targets="Configure"/>
</Target>
<Target Name="Configure" DependsOnTargets="FullPaths">
<PropertyGroup>
<Trimmed>$(CurrentXmlFile.Replace('.server',''))</Trimmed>
</PropertyGroup>
<Message Text="Trimmed: $(Trimmed)"/>
<Exec Command="ConfigCmd $(Trimmed)"/>
</Target>
For MSBuild 12.0, here's an alternative.
<Target Name="Build">
<Message Text="$([System.String]::Copy("%(Files.Filename)").Replace(".config",""))" />
</Target>
Got the same problem (except with MakeRelative), so I passed with another solution : Using good old CreateItem that take a string and transform to Item :)
<ItemGroup>
<_ToUploadFTP Include="$(PublishDir)**\*.*"></_ToUploadFTP>
</ItemGroup>
<CreateItem Include="$([MSBuild]::MakeRelative('c:\$(PublishDir)','c:\%(relativedir)%(filename)%(_ToUploadFTP.extension)'))">
<Output ItemName="_ToUploadFTPRelative" TaskParameter="Include"/>
</CreateItem>
<FtpUpload Username="$(UserName)"
Password="$(UserPassword)"
RemoteUri="$(FtpHost)"
LocalFiles="#(_ToUploadFTP)"
RemoteFiles="#(_ToUploadFTPRelative->'$(FtpSitePath)/%(relativedir)%(filename)%(extension)')"
UsePassive="$(FtpPassiveMode)" ></FtpUpload>
I am trying to create a msbuild script that will compile and place a test app into a folder on my desktop. I do not want this app published to IIS. I have followed several blgos and looked through hashimi's book but I still cannot figure this out. Below is my script. Thank you very much!
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="Clean">
<ItemGroup>
<BinFiles Include="bin\*.*" />
</ItemGroup>
<Delete Files="#(BinFiles)" />
</Target>
<Target Name="Compile" DependsOnTargets="Clean">
<MSBuild Projects="test.vbproj"/>
</Target>
<Target Name="Publish" DependsOnTargets="Compile">
<RemoveDir Directories="$(OutputFolder)"
ContinueOnError="true"/>
<MSBuild Projects="test.vbproj"
targets="ResolveReferences;_CopyWebApplication"
Properties="WebProjectOutputdir=$(OutputFolder; OutDir=$WebProjectOutputDir)\"/>
</Target>
</Target>
</Project>
Your script is a bit awkward (you redefined the clean target to do the same as the the basic clean target).
I'm pretty sure your problem comes from the CopyWebApplication which does lots of stuff according to the properties set in your project file and pass by command line.
Can you try the following script :
<Project DefaultTargets="Compile" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="Compile">
<MSBuild
Projects="test.vbproj"
Targets="Clean;Build"
Properties="OutputPath=C:\tmp"/>
</Target>
</Project>
if your test project is a website then the build target should create it on the folder specified in the OutputPath/OutDir property
I have an MSBuild script which compiles my existing solution but I'd like to change some properties of one of the projects within the solution at compile-time, including but not limited to AssemblyProduct and AssemblyTitle.
Here's a snippet of my build script:
<Target Name="Compile" >
<MSBuild Projects="..\MySolution.sln"
Properties="Configuration=MyReleaseConfig;Platform=x86" />
</Target>
I've got one main executable and several DLLs that are compiled. I am aware of the MSBuild Extension Pack and I suspect it might help me to get to where I need to be, although I'm not sure how to proceed.
Can I selectively change AssemblyInfo properties at build time?
You're on the right track with the MSBuild Extension Pack.
I find the easiest way to conditionally generate the assembly details at build time is to add an "AssemblyVersion" target directly to my .csproj file(s) that require an updated AssemblyInfo file. You can add the target directly to each csproj file that requires an updated AssemblyInfo file, or as I prefer to do it, create a custom targets file with the AssemblyVersion target and have each csproj file include your custom targets file.
Either way you likely want to use the MSBuild Extension Pack or the MSBuild Community Tasks to use their respective AssemblyInfo task.
Here's some code from our build scripts:
<!-- Import the AssemblyInfo task -->
<Import Project="$(MSBuildCommunityTasksPath)\MSBuild.Community.Tasks.Targets"/>
<!-- Overriding the Microsoft.CSharp.targets target dependency chain -->
<!-- Call our custom AssemblyVersion target before build, even from VS -->
<PropertyGroup>
<BuildDependsOn>
AssemblyVersion;
$(BuildDependsOn)
</BuildDependsOn>
</PropertyGroup>
<ItemGroup>
<AssemblyVersionFiles Include="$(MSBuildProjectDirectory)\Properties\AssemblyInfo.cs"/>
</ItemGroup>
<Target Name="AssemblyVersion"
Inputs="#(AssemblyVersionFiles)"
Outputs="UpdatedAssemblyVersionFiles">
<Attrib Files="%(AssemblyVersionFiles.FullPath)"
Normal="true"/>
<AssemblyInfo
CodeLanguage="CS"
OutputFile="%(AssemblyVersionFiles.FullPath)"
AssemblyCompany="$(CompanyName)"
AssemblyCopyright="Copyright $(CompanyName), All rights reserved."
AssemblyVersion="$(Version)"
AssemblyFileVersion="$(Version)">
<Output TaskParameter="OutputFile"
ItemName="UpdatedAssemblyVersionFiles"/>
</AssemblyInfo>
</Target>
Sneal's answer was very helpful, but I'd like to show what I actually ended up doing. Instead of editing csproj files (there are several) I instead added tasks to my build script. Here's a snippet:
<PropertyGroup>
<ProductName>MyApp</ProductName>
<CompanyName>MyCompany</CompanyName>
<Major>1</Major>
<Minor>0</Minor>
<Build>0</Build>
<Revision>0</Revision>
</PropertyGroup>
<ItemGroup>
<AssemblyVersionFiles Include="..\MyMainProject\Properties\AssemblyInfo.cs"/>
</ItemGroup>
<Target Name="AssemblyVersionMAIN" Inputs="#(AssemblyVersionFiles)" Outputs="UpdatedAssemblyVersionFiles">
<Attrib Files="%(AssemblyVersionFiles.FullPath)" Normal="true"/>
<AssemblyInfo
CodeLanguage="CS"
OutputFile="%(AssemblyVersionFiles.FullPath)"
AssemblyProduct="$(ProductName)"
AssemblyTitle="$(ProductName)"
AssemblyCompany="$(CompanyName)"
AssemblyCopyright="© $(CompanyName) 2010"
AssemblyVersion="$(Major).$(Minor).$(Build).$(Revision)"
AssemblyFileVersion="$(Major).$(Minor).$(Build).$(Revision)"
AssemblyInformationalVersion="$(Major).$(Minor).$(Build).$(Revision)">
<Output TaskParameter="OutputFile" ItemName="UpdatedAssemblyVersionFiles"/>
</AssemblyInfo>
</Target>
<Target Name="Compile" DependsOnTargets="AssemblyVersionMAIN">
<MSBuild Projects="..\MySolution.sln"
Properties="Configuration=Release;Platform=x86;Optimize=true" />
</Target>
Then, I can override my variables from the command line, or a batch script, like so:
set MAJ=1
set MIN=2
set BLD=3
set REV=4
msbuild buildScript.xml /t:Compile /p:Major=%MAJ% /p:Minor=%MIN% /p:Build=%BLD% /p:Revision=%REV%
<Target Name="SetVersion">
<ItemGroup>
<AssemblyInfoFiles Include="$(TargetDir)\**\AssemblyInfo.cs"/>
</ItemGroup>
<Message Text="change the Version number for:"/>
<Message Text="%(AssemblyInfoFiles.FullPath)"/>
<MSbuild.ExtensionPack.Framework.AssemblyInfo
AssemblyInfoFiles="#(AssemblyInfoFiles)"
AssemblyTitle="newTitle"
AssemblyMajorVersion="2"
AssemblyMinorVersion="0"/>
</Target>