I create a table and sequence in order to replace identity in the table I use SQL Server 2012 Express but I get this error while I tried to insert data to the table
Msg 11719, Level 15, State 1, Line 2
NEXT VALUE FOR function is not allowed in check constraints, default objects, computed columns,
views, user-defined functions, user-defined aggregates, user-defined
table types, sub-queries, common table expressions, or derived
tables.
T-SQL code:
insert into Job_Update_Log(log_id, update_reason, jobid)
values((select next value for Job_Log_Update_SEQ),'grammer fixing',39);
This is my table:
create table Job_Update_Log
(
log_id int primary key ,
update_reason nvarchar(100) ,
update_date date default getdate(),
jobid bigint not null,
foreign key(jobid) references jobslist(jobid)
);
and this is my sequence:
CREATE SEQUENCE [dbo].[Job_Log_Update_SEQ]
AS [int]
START WITH 1
INCREMENT BY 1
NO CACHE
GO
Just get rid of the subselect in the VALUES section, like this:
insert into Job_Update_Log(log_id,update_reason,jobid)
values (next value for Job_Log_Update_SEQ,'grammer fixing',39);
Reference: http://msdn.microsoft.com/en-us/library/hh272694%28v=vs.103%29.aspx
Your insert syntax appears to be wrong. You are attempting to use a SELECT statement inside of the VALUES section of your query. If you want to use SELECT then you will use:
insert into Job_Update_Log(log_id,update_reason,jobid)
select next value for Job_Log_Update_SEQ,'grammer fixing',39;
See SQL Fiddle with Demo
I changed the syntax from INSERT INTO VALUES to INSERT INTO ... SELECT. I used this because you are selecting the next value of the sequence.
However, if you want to use the INSERT INTO.. VALUES, you will have to remove the SELECT from the query:
insert into Job_Update_Log(log_id,update_reason,jobid)
values(next value for Job_Log_Update_SEQ,'grammer fixing',39);
See SQL Fiddle with Demo
Both of these will INSERT the record into the table.
Try this one:
–With a table
create sequence idsequence
start with 1 increment by 3
create table Products_ext
(
id int,
Name varchar(50)
);
INSERT dbo.Products_ext (Id, Name)
VALUES (NEXT VALUE FOR dbo.idsequence, ‘ProductItem’);
select * from Products_ext;
/* If you run the above statement two types, you will get the following:-
1 ProductItem
4 ProductItem
*/
drop table Products_ext;
drop sequence idsequence;
------------------------------
Related
Code below using sample data.
INSERT INTO ClientSeller VALUES
(1,'John Smith',88,1,'a',1),
(2,'Joe Smith',12,2,'b',2),
(3,'Warren ',15,2,'c',3),
(4,'Karen',69,6,'d',5),
(5,'Bob',45,6,'e',55),
(6,'Owen',65,6,'f',4),
(7,'Steve',25,5,'g',8),
(8,'Peter',24,55,'a',88),
(9,'Zoe',245,8,'b',8),
(10,'Jacky',244,2,'c',8);
and displays :
ORA-00933: SQL command not properly ended
Can any explain why this does not execute?
Based on your example, I created the following table.
Create table ClientSeller (
identity number(2),
name varchar2(50),
employeno number(2),
otherno number(1),
letter char(1),
otherotherno number(1)
)
Then using the code below I can insert two of your sample rows into the table. Oracle has a very clunky syntax for inserting values into a table. You absolutely need the Insert All with separate INTO tablename VALUES xxxxx for each values set and then at the end you MUST add the select 1 from DUAL. See this example for more details.
Also, do not end your statements with the semicolon. In none of the example code provided here will you find such a character.
INSERT ALL
INTO ClientSeller VALUES (1,'John Smith',88,1,'a',1)
INTO ClientSeller VALUES (2,'Joe Smith',12,2,'b',2)
SELECT 1 from DUAL
This may be a very basic question, but I have been struggling with this.
I have a SSMS query that I'll be using multiple times for a large set of client Ids. Its quite cumbersome to have to amend the parameters in all the where clauses every time I want to run it.
For simplicity, I want to convert a query like the one below:
SELECT
ID,
Description
From TestDb
Where ID in ('1-234908','1-345678','1-12345')
to a query of the format below so that I only need to change my variable field once and it can be applied across my query:
USE TestDb
DECLARE #ixns NVARCHAR(100)
SET #ixns = '''1-234908'',''1-345678'',''1-12345'''
SELECT
ID,
Description
From TestDb
Where ID IN #ixns
However, the above format doesn't work. Can anyone help me on how I can use a varchar/string variable in my "where" clause for my query so that I can query multiple IDs at the same time and only have to adjust/set my variable once?
Thanks in advance :D
The most appropriate solution would be to use a table variable:
DECLARE #ixns TABLE (id NVARCHAR(100));
INSERT INTO #ixns(id) VALUES
('1-234908'),
('1-345678'),
('1-12345');
SELECT ID, Description
FROM TestDb
WHERE ID IN (SELECT id FROM #ixns);
You can load ids to temp table use that in where condition
USE TestDb
DECLARE #tmpIDs TABLE
(
id VARCHAR(50)
)
insert into #tmpIDs values ('1-234908')
insert into #tmpIDs values ('1-345678')
insert into #tmpIDs values ('1-12345')
SELECT
ID,
Description
From TestDb
Where ID IN (select id from #tmpIDs)
The most appropriate way is to create a table type because it is possible to pass this type as parameters.
1) Creating the table type with the ID column.
create type MyListID as table
(
Id int not null
)
go
2) Creating the procedure that receives this type as a parameter.
create procedure MyProcedure
(
#MyListID as MyListID readonly
)
as
select
column1,
column2
...
from
MyTable
where
Id in (select Id from #MyListID)
3) In this example you can see how to fill this type through your application ..: https://stackoverflow.com/a/25871046/8286724
I have a bigint PK column which is NOT an identity column, because I create the number in a function using different numbers. Anyway, I am trying to save this bigint number in a parameter #InvID, then use this parameter later in the procedure.
ScopeIdentity() is not working for me, it saved Null to #InvID, I think because the column is not an identity column. Is there anyway to select the record that was just inserted by the procedure without adding an extra ID column to the table?
It would save me a lot of effort and work if there is a direct way to select this record and not adding an id column.
insert into Lab_Invoice(iID, iDate, iTotal, iIsPaid, iSource, iCreator, iShiftID, iBalanceAfter, iFileNo, iType)
values (dbo.Get_RI_ID('True'), GETDATE(),
(select FilePrice from LabSettings), 'False', #source, #user, #shiftID, #b, #fid, 'Open File Invoice');
set #invID = CAST(scope_identity() AS bigint);
P.S. dbo.Get_RI_ID('True') a function returns a bigint.
Why don't you use?
set #invId=dbo.Get_RI_ID('True');
insert into Lab_Invoice(iID,iDate,iTotal,iIsPaid,iSource,iCreator,iShiftID,iBalanceAfter,iFileNo,iType)
values(#invId,GETDATE(),(select FilePrice from LabSettings),'False',#source,#user,#shiftID,#b,#fid,'Open File Invoice');
You already know that big id value. Get it before your insert statement then use it later.
one way to get inserted statement value..it is not clear which value you are trying to get,so created some example with dummy data
create table #test
(
id int
)
declare #id table
(
id int
)
insert into #test
output inserted.id into #id
select 1
select #invID=id from #id
I have written a stored procedure for inserting data into my table. These are my table's columns with their datatype:
Ad nvarchar(150),
Yazar nvarchar(150),
SayfaSayisi smallint,
KategoriId int
Gmc datetime,
HostName nvarchar(150)
The problem is that Gmc and HostName have their own default values. So I can't use these two in the stored procedure.
Gmc ---> GetDate() (to get insert date)
HostName --> Host_Name( )
So when I execute the query I am getting this error.
There are more columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement
This is the query
Create proc Kitap_Insert
#Ad nvarchar(150),
#Yazar nvarchar(150),
#SayfaSayisi smallint,
#KategoriId int
Gmc datetime,
HostName nvarchar(150)
as
Insert into Kitap(Id, Ad, Yazar, SayfaSayisi, KategoriId)
values(#Ad, #Yazar, #SayfaSayisi, #KategoriId)
What is the proper way of doing this?
You need remove ID from insert list
Insert into Kitap(Ad,Yazar,SayfaSayisi,KategoriId)
values(#Ad,#Yazar,#SayfaSayisi,#KategoriId)
or add a value for it as below
Insert into Kitap(Id,Ad,Yazar,SayfaSayisi,KategoriId)
values(#ID, #Ad,#Yazar,#SayfaSayisi,#KategoriId)
Instead of :
Insert into Kitap(Id,Ad,Yazar,SayfaSayisi,KategoriId)
values(#Ad,#Yazar,#SayfaSayisi,#KategoriId)
Use:
INSERT INTO Kitap(Ad,Yazar,SayfaSayisi,KategoriId)
VALUES (#Ad,#Yazar,#SayfaSayisi,#KategoriId)
You are asking SQL engine that you will provide id (an additional field) as well (field that doesn't exist in the table or is an auto increment field) and you are not providing the value for the same and hence your error here are more columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement
So remove additional Id from your insert query.
The error you are getting because you tried to insert value into more column names than specified in Values Clause.
If you have ID column as Auto-increment field in table so you dont have to include that ID column in so your insert query will be like this:-
Insert into Kitap
(Ad,Yazar,SayfaSayisi,KategoriId)
values
(#Ad,#Yazar,#SayfaSayisi,#KategoriId)
If you don't have ID column as Auto-increment field in table so you provide value to that id column also in Value Clause so your insert query will be like this:-
NOTE:-
You have to calculate and Set Value to #Id variable before using it in Insert Query
Declare #Id as INT
SET #ID = ---- set here with some value which will become Primary key(I think)
Insert into Kitap
(Id,Ad,Yazar,SayfaSayisi,KategoriId)
values
(#Id, #Ad,#Yazar,#SayfaSayisi,#KategoriId)
I'm new to firebird and I have verious issues. I want to insert various lines into a table selected from another table.
Here's the code:
/*CREATE GENERATOR POS; */
SET GENERATOR POS TO 1;
SET TERM ^;
create trigger BAS_pkassign
for MATERIAL
active before insert position 66
EXECUTE BLOCK
AS
declare posid bigint;
select gen_id(POS, 1)
from RDB$DATABASE
into :posid;
BEGIN
END
SET TERM ; ^
INSERT INTO MATERIAL ( /*ID */ LOCATION, POSID, ARTID, ARTIDCONT, QUANTITY )
SELECT 1000, ':posid', 309, BAS_ART.ID, 1
FROM BAS_ART
WHERE BAS_ART.ARTCATEGORY LIKE '%MyWord%'
The ID should autoincrement from 66 on. The posid should autoincrement from 1 on.
Actually it is not inserting anything.
I'm using Firebird Maestro and have just opened the SQL Script Editor (which doesnt throw any error message on executing the script).
Can anybody help me?
Thanks!
Additional information:
The trigger should autoincrement the column "ID" - but I dont know how exactly I can change it so it works.. The ':posid' throws an error using it :posid but like this theres no error (I guess its interpretated as a string). But how do I use it right?
I dont get errors when I execute it. The table structure is easy. I have 2 tables:
1.
Material (
ID (INTEGER),
Location (INTEGER),
POSID (INTEGER),
ARTID (INTEGER),
ARTIDCONT (INTEGER),
QUANTITY (INTEGER),
OTHERCOLUMN (INTEGER))
and the 2. other table
BAS_ART (ID (INTEGER), ARTCATEGORY (VARCHAR255))
-> I want to insert all entries from the table BAS_ART which contain "MyWord" in the column ARTCATEGORY into the MATERIAL table.
I don't understand why you need the trigger at all.
This problem:
I want to insert all entries from the table BAS_ART which contain "MyWord" into the MATERIAL table
Can be solved with a single insert ... select statement.
insert into material (id, location, posid, artid, quantity)
select next value for seq_mat_id, 1000, next value for seq_pos, id, 1
from bas_art
where artcategory = 'My Word';
This assumes that there is a second sequence (aka "generator") that is named seq_mat_id that provides the new id for the column material.id
For most of my answer I will assume a very simple table:
CREATE TABLE MyTable (
ID BIGINT PRIMARY KEY,
SomeValue VARCHAR(255),
posid INTEGER
)
Auto-increment identifier
Firebird (up to version 2.5) does not have an identity column type (this will be added in Firebird 3), instead you need to use a sequence (aka generator) and a trigger to get this.
Sequence
First you need to create a sequence using CREATE SEQUENCE:
CREATE SEQUENCE seqMyTable
A sequence is atomic which means interleaving transactions/connections will not get duplicate values, it is also outside transaction control, which means that a ROLLBACK will not revert to the previous value. In most uses a sequences should always increase, so the value reset you do at the start of your question is wrong for almost all purposes; for example another connection could reset the sequence as well midway in your execution leaving you with unintended duplicates of POSID.
Trigger
To generate a value for an auto-increment identifier, you need to use a BEFORE INSERT TRIGGER that assigns a generated value to the - in this example - ID column.
CREATE TRIGGER trgMyTableAutoIncrement FOR MyTable
ACTIVE BEFORE INSERT POSITION 0
AS
BEGIN
NEW.ID = NEXT VALUE FOR seqMyTable;
END
In this example I always assign a generated value, other examples assign a generated value only when the ID is NULL.
Getting the value
To get the generated value you can use the RETURNING-clause of the INSERT-statement:
INSERT INTO MyTable (SomeValue) VALUES ('abc') RETURNING ID
INSERT INTO ... SELECT
Using INSERT INTO ... SELECT you can select rows from one table and insert them into others. The reason it doesn't work for you is because you are trying to assign the string value ':pos' to a column of type INTEGER, and that is not allowed.
Assuming I have another table MyOtherTable with a similar structure as MyTable I can transfer values using:
INSERT INTO MyTable (SomeValue)
SELECT SomeOtherValue
FROM MyOtherTable
Using INSERT INTO ... SELECT it is not possible to obtain the generated values unless only a single row was inserted.
Guesswork with regard to POSID
It is not clear to me what POSID is supposed to be, and what values it should have. It looks like you want to have an increasing value starting at 1 for a single INSERT INTO ... SELECT. In versions of Firebird up to 2.5 that is not possible in this way (in Firebird 3 you would be able to use ROW_NUMBER() for this).
If my guess is right, then you will need to use an EXECUTE BLOCK (or a stored procedure) to assign and increase the value for every row to be inserted.
The execute block would be something like:
EXECUTE BLOCK
AS
DECLARE posid INTEGER = 1;
DECLARE someothervalue VARCHAR(255);
BEGIN
FOR SELECT SomeOtherValue FROM MyOtherTable INTO :someothervalue DO
BEGIN
INSERT INTO MyTable (SomeValue, posid) VALUES (:someothervalue, :posid);
posid = posid + 1;
END
END
Without an ORDER BY with the SELECT the value of posid is essentially meaningless, because there is no guaranteed order.