I have the following tables
Payment
PayTypeId, Description
0 , Credit
1, Debit
2,Master
ActualPayment
Id,PayTypeId,Amount
1,1,10
Here is the output i am looking at
Id,PayTypeId,Amount
1,0,NULL
1,1,10
1,2,NULL
Basically I want all the records of ActualPayment including all payment types.
Here is the query i have used but am not getting any records
select
*
from #ActualPayments ap
left join #Payment p on ap.paytypeid = p.paytypeid
where p.paytypeid is null
If you want one record for each of the three PayTypeID values, then you need those three records on the left-hand side of the LEFT JOIN.
Equally, if you want the ActuallPaymentID on each output line, that value needs to be on the left hand side.
It's all leading you down the wrong avenue with the data that you have, and the tables that you have described.
With just those two tables in your question, I would use this layout instead...
SELECT
ap.ActualPaymentID,
p.PayTypeID,
SUM(CASE WHEN ap.PayTypeID = p.PayTypeID THEN ap.Amount END) AS Amount
FROM
ActualPayments AS ap
CROSS JOIN
Payment AS p
GROUP BY
ap.ActualPaymentID,
p.PayTypeID
You aren't receiving any records because you are filtering everything out with the WHERE clause p.paytypeid is null
Try running it without the WHERE clause.
Edit: The below SQL should return the correct information. I've used a CROSS JOIN to create an in-line view. This should remove the unwanted NULLs.
SELECT t1.id, t1.paytypeid, t2.amount
FROM (
SELECT id, payment.paytypeid
FROM #ActualPayments
CROSS JOIN #Payment
) t1
LEFT OUTER JOIN #ActualPayments t2
ON t1.paytypeid = t2.paytypeid
;
I think you want a FULL OUTER JOIN:
select
*
from #ActualPayments ap
full outer join #Payment p
on ap.paytypeid = p.paytypeid
;
This will return all rows from the ActualPayments table along with their corresponding values from Payment - if there is any. Additional it will return all rows from Payment for which no ActualPayments exist.
Please note: The where clause of your sample query must not be used!
I'm confused why you would want to do this, but here's one way
select ap.Id, pt.PayTypeId, ap2.Amount
from #ActualPayments ap
cross join #PaymentTypes pt
left join #ActualPayments ap2
on pt.PayTypeId = ap2.PayTypeId
and ap.Id = ap2.id
Related
SELECT
supplies.id,
supplierId,
supplies.date,
supplies.commodity,
supplier_payments.date AS paymentDate,
FROM
supplies
INNER JOIN suppliers ON suppliers.id = supplies.supplierId
LEFT JOIN supplier_payments ON supplier_payments.supplyId = supplies.id
WHERE supplier_payments.isDeleted = 0 AND supplierId = 1
What I am trying is to get all records from supplies table and related records from supplier_payments but the supplier_payments.isDeleted should be equal to 0. What happens now that I only get records from supplies that have at least one supplier payment because of the condition. Is there a way to get all supply records and supply payments with condition?
Consider moving the condition on the LEFT JOINed table to the ON clause of the JOIN:
SELECT
sr.id,
se.supplierId,
se.date,
se.commodity,
sp.date AS paymentDate,
FROM supplies se
INNER JOIN suppliers sr ON sr.id = se.supplierId
LEFT JOIN supplier_payments sp
ON sp.supplyId = se.id
AND sp.isDeleted = 0
WHERE se.supplierId = 1
Side notes:
in a multi-table query, always qualify each column with the table it belongs to, to make the query easier to follow and avoid ambiguity
table aliases make the query easier to read and write
I have to make a list of customer who do not have any invoice but have paid an invoice … maybe twice.
But with my code (stated below) it contains everything from the left join. However I only need the lines highlighted with green.
How should I make a table with only the 2 highlights?
Select paymentsfrombank.invoicenumber,paymentsfrombank.customer,paymentsfrombank.value
FROM paymentsfrombank
LEFT OUTER JOIN debtors
ON debtors.value = paymentsfrombank.value
You only want to select columns from paymentsfrombank. So why do you even join?
select invoice_number, customer, value from paymentsfrombank
except
select invoice_number, customer, value from debtors;
(This requires exact matches as in your example, i.e. same amount for the invoice/customer).
There are two issues in your SQL. First, you need to join on Invoice number, not on value, as joining on value is pointless. Second, you need to only pick those payments where there are no corresponding debts, i.e. when you left-join, the table on the right has "null" in the joining column. The SQL would be something like this:
SELECT paymentsfrombank.invoicenumber,paymentsfrombank.customer,paymentsfrombank.value
FROM paymentsfrombank
LEFT OUTER JOIN debtors
ON debtors.InvoiceNumber = paymentsfrombank.InvoiceNumber
WHERE debtors.InvoiceNumber is NULL
in mysql we usually have this way to flip the relation and extract the rows that dosen't have relation.
Select paymentsfrombank.invoicenumber,paymentsfrombank.customer,paymentsfrombank.value
FROM paymentsfrombank
LEFT OUTER JOIN debtors
ON debtors.value = paymentsfrombank.value where debtors.value is null
You can use NOT EXISTS :
SELECT p.*
FROM paymentsfrombank p
WHERE NOT EXISTS (SELECT 1 FROM debtors d WHERE d.invoice_number = p.invoice_number);
However, the LEFT OUTER JOIN would also work if you add filtered with WHERE Clause to filtered out only missing customers that haven't any invoice information :
SELECT p.invoicenumber, p.customer, p.value
FROM paymentsfrombank P LEFT OUTER JOIN
debtors d
ON d.InvoiceNumber = p.InvoiceNumber
WHERE d.InvoiceNumber IS NULL;
Note : I have used table alias (p & d) that makes query to easier read & write.
Original query is joining customer table and contract table and Extra Service History, this all works.
However I'm having trouble adding 4th table which should apply some further criteria.
Current working query (no changes needed) :
select b.*
from SubscribersFIN b
inner join (select Id, Account_Number, ContractNumber, BackendId
from Contract) e on b.c_id='FI_' + e.Account_Number
left join (select Contract
from Extra_Service_History
where Service_Name='debit_plan') d on e.Id=d.Contract
where COUNTRY='fi'
and NO_SMS = 0
and d.Contract is null
Goal is to filter the set that came from the big query that only records that had Paid status in Invoice to show.
right join (select Contract
from Invoice
where Status = 'PAID') i on e.Id=i.Contract
This one does not seem to do the trick, so I'm not able to figure out what sort of a join-type or logic is required here.
You have a few options:
INNER JOIN
Depending on the particular type of outer join, they return rows where no match is found (either left, right, or both sides of the join). Based on your description this is not what you want. Simply use:
inner join (select Contract
from Invoice
where Status = 'PAID') i on e.Id=i.Contract
It shouldn't matter where this occurs in the FROM clause; provided the join between these 2 tables is INNER. The query engine is free to rearrange for performance provided it doesn't change semantics. (But personally I find it tidier to put INNER JOINs at the top.)
IN filter
What you've described is a filter.
Goal is to filter the set that came from the big query that only records that had Paid status in Invoice to show.
So it's clearer to implement this as a filter in the WHERE clause. E.g.
where e.Id in (select Contract
from Invoice
where Status = 'PAID')
and ...
EXISTS filter
Similar to the above, but using an EXISTS subquery instead.
where exists (select *
from Invoice i
where Status = 'PAID'
and i.Contract = e.Id)
and ...
Rather than mixing LEFT and RIGHT joins, just place it as an INNER join higher up in your query:
select b.*
from SubscribersFIN b
inner join (select Id, Account_Number, ContractNumber, BackendId
from Contract) e on b.c_id='FI_' + e.Account_Number
inner join (select Contract
from Invoice
where Status = 'PAID') i on e.Id=i.Contract
left join (select Contract
from Extra_Service_History
where Service_Name='debit_plan') d on e.Id=d.Contract
where COUNTRY='fi'
and NO_SMS = 0
and d.Contract is null
Based on my understanding i just re arranged the query. Try this. If your where condition columns are coming from any of the LEFT JOIN tables, join them at the on clause.
select b.* from SubscribersFIN b
inner join Contract e on b.c_id='FI_' + e.Account_Number
left join Extra_Service_History d on e.Id=d.Contract and d.Service_Name='debit_plan' and d.Contract is null
left join invoice i on e.Id=i.Contract and i.Status = 'PAID'
where COUNTRY='fi' and NO_SMS = 0
I have been using sql for a long time, but I am now working in Databricks and I am getting a very strange result. I have a table called block_durations with a set of ids (called block_ts), and I have another table called mergetable, which I want to left join to that table. Mergetable is indexed by acct_id and block_ts, so it has many different records for each block_ts. I want to keep the rows in block_durations that don't match, and if there are multiple matches in mergetable I want there to be multiple corresponding entries in the resulting join, as you would expect from a left join.
But this is not happening. In order to demonstrate this, I am showing the result of joining mergetable, after filtering for a single acct_id so that there is at most one match per block_ts.
select count(*) from mergetable where acct_id = '0xfbb1b73c4f0bda4f67dca266ce6ef42f520fbb98'
16579
select count(*) from block_durations
82817
select count(*) from
(
SELECT
mt.*,
bd.block_duration
FROM
block_durations bd
left outer JOIN mergetable mt
ON mt.block_ts = bd.block_ts
where acct_id='0xfbb1b73c4f0bda4f67dca266ce6ef42f520fbb98'
) countTable
16579
As you can see, even though there are >80000 records in block_durations, most of them are getting lost in the left join. Why is this happening? I thought the whole point of a left join is that the non-matching rows of the left table are kept. This is exactly the behavior I would expect from an inner join -- and indeed when I switch to an inner join nothing changes.
Could someone please help me figure out what's going on?
-Paul
All rows from left side of the join are preserved, but later on you run WHERE ... condition on that which removed rows not matching the condition.
Merge your WHERE condition into JOIN condition:
SELECT
mt.*,
bd.block_duration
FROM
block_durations bd
left outer JOIN mergetable mt
ON mt.block_ts = bd.block_ts AND acct_id='0xfbb1b73c4f0bda4f67dca266ce6ef42f520fbb98'
You can also filter mergetable before you run JOIN on the results:
SELECT
mt.*,
bd.block_duration
FROM
block_durations bd
left outer JOIN (SELECT * FROM mergetable WHERE acct_id='0xfbb1b73c4f0bda4f67dca266ce6ef42f520fbb98') mt
ON mt.block_ts = bd.block_ts
I have this query:
SELECT
EnrollmentID, MarketID
FROM
Contracts AS CO
LEFT JOIN
Customers AS C ON C.EnrollmentID = CO.BatchID AND MarketID = 'AB'
WHERE
C.EnrollmentID IS NULL
Here, I have a question that in this query is it possible that the query will verify data for MarketID = 'AB' in left join because as per WHERE condition?
I am getting result of EnrollmentIDs and MarketIDs are all NULL.
Note: The LEFT JOIN keyword returns all the rows from the left table (Contracts ), even if there are no matches in the right table (Customers ).
Now, if you want to select right table column and there are no matching data in the right table ,like.
SELECT CO.EnrollmentID, CO.MarketID ,C.Some_col
FROM Contracts AS CO
LEFT JOIN Customers AS C ON C.EnrollmentID = CO.BatchID
so, C.Some_col column will get all the null value for no matching rows in the right table.i think this is the reason why you are getting the null value for
MarketIDs and EnrollmentIDs.
hope, this help you.