Closed. This question is off-topic. It is not currently accepting answers.
Want to improve this question? Update the question so it's on-topic for Stack Overflow.
Closed 10 years ago.
Improve this question
We get the below error during FIP installation, any idea why?
InstallerUtil v1.2, incorporating fip v1.3 launchpad=ITStagingLaunchpad, type=test
Indexing destination...
ERROR: tooltwist.fip.FipException Unknown response from FIP server: 500
Exception: tooltwist.fip.FipException: tooltwist.fip.FipException: Unknown response from FIP server: 500
The '500' is an HTTP status code. Looking at wikipedia...
500 Internal Server Error A generic error message, given when no more
specific message is suitable.[2]
FIP doesn't return any error information that might help someone hack or crack it's operation, so you'll need to look at the output of fipserver on the destination machine.
If you started fipserver using nohup so it wouldn't hang up when you log off, using
nohup ./fipserver 39393 &
then the output will be in a file named nohup.out, in the same directory.
Related
Closed. This question is not about programming or software development. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 10 days ago.
Improve this question
I removing other versions from cert-manager. After that i install the new version with helm using.
Installation works fine.
but when i use the command:
$ kubectl get orders,challenges,clusterissuers
Error from server: request to convert CR from an invalid group/version: acme.cert-manager.io/v1alpha2
Error from server: request to convert CR from an invalid group/version: acme.cert-manager.io/v1alpha2
Error from server: request to convert CR from an invalid group/version: cert-manager.io/v1alpha2
The CRDs:
Name: orders.acme.cert-manager.io
Namespace:
Labels: app=cert-manager
app.kubernetes.io/instance=cert-manager
app.kubernetes.io/managed-by=Helm
app.kubernetes.io/name=cert-manager
app.kubernetes.io/version=v1.8.2
helm.sh/chart=cert-manager-v1.8.2
Annotations: cert-manager.io/inject-ca-from-secret: cert-manager/cert-manager-webhook-ca
meta.helm.sh/release-name: cert-manager
meta.helm.sh/release-namespace: cert-manager
API Version: apiextensions.k8s.io/v1
Kind: CustomResourceDefinition
....
Last Transition Time: 2022-06-24T15:25:23Z
Message: no conflicts found
Reason: NoConflicts
Status: True
Type: NamesAccepted
Last Transition Time: 2022-06-24T15:25:23Z
Message: the initial names have been accepted
Reason: InitialNamesAccepted
Status: True
Type: Established
Stored Versions:
v1
i dont found the CR where still using cert-manager.io/v1alpha2 and acme.cert-manager.io/v1alpha2
First of all, suggest to backup all your objects (certs, orders, issuer, clusterissuer, etc. with velero for example) !
Cert-manger documentation suggests using the cert-manager cli as:
cmctl upgrade migrate-api-version
You may need --skip-stored-version-check if you already tried to fix CRD api manually (like described in this issue):
cmctl upgrade migrate-api-version --skip-stored-version-check
Finally, if it's failing with the same message, install the 1.6.3 (if CRD is manually installed, upgrade CRD with 1.6.3) and repeat the command cmctl upgrade migrate-api-version. At last, you can upgrade minor version one by one (1.7, 1.8, etc.) as recommended
This question already has answers here:
Trying to GET one topic http://localhost:8080/topics?id=1 in POSTMAN. Got the following error
(2 answers)
Closed 2 years ago.
In my Springboot 2.3.0 application, I'm getting this WARNING in the log file intermittently and would like to stop logging them.
I understand that this is just a warning and can be ignored. But Is there a property that I can add to application.properties and stop logging this in the log file.
To enforce a read only connection, set the read-only data source or connection property. ERRORCODE=4474, SQLSTATE=01000 ```
As this is just a WARNING, I enabled ERROR log level for this particular package, so that WARNINGS are not shown in the log.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 4 years ago.
Improve this question
Below is my OpenLDAP structure :
+--> dc=test,dc=com (3)
---> cn=admin
+--> ou=groups (3) | ---> cn=admin | ---> cn=irc | ---> cn=users | ---> Create new entry here
+--> ou=users (4) | ---> cn=user1 | ---> cn=user2 | ---> cn=user3 | ---> cn=user4
The setttings in Openfire :
Step 1 :
Port : 389
Base DN : ou=users,dc=test,dc=com
Administrator DN: cn=admin,dc=test,dc=com
Step 2 :User Mapping :
Username Field:uid
Step 3: Group Mapping
Group Field:cn
Member Field:uniqueMember
Description Field: description
For the next window when I am clicking on Save and Continue, I get following exception :
HTTP ERROR 500
Problem accessing /setup/setup-admin-settings.jsp. Reason:
Server Error
Caused by:
java.lang.NullPointerException
at org.jivesoftware.openfire.admin.setup.setup_002dadmin_002dsettings_jsp._jspService(setup_002dadmin_002dsettings_jsp.java:99)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:547)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1359)
at com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(PageFilter.java:118)
at com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter.java:52)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1330)
at org.jivesoftware.util.LocaleFilter.doFilter(LocaleFilter.java:74)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1330)
at org.jivesoftware.util.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:50)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1330)
at org.jivesoftware.admin.PluginFilter.doFilter(PluginFilter.java:78)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1330)
at org.jivesoftware.admin.AuthCheckFilter.doFilter(AuthCheckFilter.java:164)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1330)
at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:478)
at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:119)
at org.eclipse.jetty.security.SecurityHandler.handle(SecurityHandler.java:520)
at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:227)
at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:941)
at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:409)
at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:186)
at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:875)
at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:117)
at org.eclipse.jetty.server.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:250)
at org.eclipse.jetty.server.handler.HandlerCollection.handle(HandlerCollection.java:149)
at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:110)
at org.eclipse.jetty.server.Server.handle(Server.java:349)
at org.eclipse.jetty.server.HttpConnection.handleRequest(HttpConnection.java:441)
at org.eclipse.jetty.server.HttpConnection$RequestHandler.headerComplete(HttpConnection.java:919)
at org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:582)
at org.eclipse.jetty.http.HttpParser.parseAvailable(HttpParser.java:218)
at org.eclipse.jetty.server.AsyncHttpConnection.handle(AsyncHttpConnection.java:51)
at org.eclipse.jetty.io.nio.SelectChannelEndPoint.handle(SelectChannelEndPoint.java:586)
at org.eclipse.jetty.io.nio.SelectChannelEndPoint$1.run(SelectChannelEndPoint.java:44)
at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:598)
at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:533)
at java.lang.Thread.run(Thread.java:701)
Also I did some changes and I was able to see the Add Administrator screen but I was not able to add any of my existing LDAP users here. It was throws following error :
"No username was provided or the specified username was not found."
I restarted the server and since then NullPointerException started coming back again.- (well that deserves another discussion, once I get through this)
Where am I going wrong?
FYI, both the servers, openfire and OpenLdap, are running on same virtual machines.
Thanks in adv.
I could proceed to the next screen by changing advanced settings in user mapping section. My changes are : Posix Mode: No Group Filter : (objectClass=Group)
Surprisingly, once I reached to the Add Administrator screen, after coming back I reset these fields and it was still working fine. I wonder if after restarting the server it will work or not.
Also in the Step 1, make sure in the hostname you provide the ip address of your machine. With localhost it dint work for me.
Thanks,
Hope it helps anyways!
For the other query I had, I could add administrators by modifying my Base DN to "Base DN : dc=test,dc=com"
With specifying ou, it seems I was restricting the users. :)
If you have that problem even all the test were successfull (by clicking the "Test" buttons you have next to the "Save and continue" button), it is because it took you too long to finalize the setup and the session somehow expired.
Restart the openfire service, reload the web page and go through the setup process again, in one go.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
Closed 5 years ago.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Improve this question
not able to login into server through ssh. so logged in with rsh and when trying to ssh host itself getting error :
no common kex alg: client 'diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1', server 'gss-group1-sha1-toWM5Slw5Ew8Mqkay+al2g=='
I found this log in /var/svc/log/network-ssh:default.log
[ May 14 21:23:13 Rereading configuration. ]
[ May 14 21:23:13 Executing refresh method ("/lib/svc/method/sshd restart") ]
[ May 14 21:23:13 Method "refresh" exited with status 0 ]
[ May 14 21:30:25 Stopping because service disabled. ]
[ May 14 21:30:25 Executing stop method (:kill) ]
[ May 14 21:33:08 Enabled. ]
[ May 14 21:33:08 Executing start method ("/lib/svc/method/sshd start") ]
Could not load host key: /.ssh/id_dsa
Could not load host key: /.ssh/identity
Disabling protocol version 1. Could not load host key
[ May 14 21:33:08 Method "start" exited with status 0 ]
thanks in advance.
Looks like the server and client don’t find a common authentication method.
I just got that with a sun cluster here: It only supports diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1, but my Gentoo GNU/Linux ssh server seems to have dropped the group1 algo.
Fixed by changing /etc/ssh/sshd_config on the ssh server to include
KexAlgorithms curve25519-sha256#libssh.org,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha1,diffie-hellman-group-exchange-sha256,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521
I fear, though, that there was a reason for removing the group1 algorithm from the default. I would not do this on a publicly accessible box.
For reference also see https://security.stackexchange.com/questions/25662/openssh-default-preferred-ciphers-hash-etc-for-ssh2
Turn on verbose ssh which will hopefully show where the issue is.
E.g.
ssh -v host
If that doesn't give enough info, you can try
ssh -vv host
or even
ssh -vvv host
Look for the first error in the output which will hopefully give you clues as to where the issue lies.
This question is unlikely to help any future visitors; it is only relevant to a small geographic area, a specific moment in time, or an extraordinarily narrow situation that is not generally applicable to the worldwide audience of the internet. For help making this question more broadly applicable, visit the help center.
Closed 10 years ago.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, gcadmin#pair.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
This has something to do with any htcaccess file or something?
This page works perfectly in my localhost, but when I upload it here: http://globalcolleague.com/test/ it throws the error.
Most common issue for 500 internal server error on servers with CPanel installed is that you are trying to CHMOD files to 777 permissions when the max the server will safely allow for is 755. Easy fix is to make sure no .php files have 777 permissions, as the server's security will kick in with the 500 error if this is the case.