1) i have a ashx file that pass to this file my parameters, for example :
Edit
now, i want use it as follows:
Edit
2) how to convert ASHX file to dll file and how to use that??!!
tanx!
The iis7 rewrite rules should work for you
http://www.iis.net/learn/extensions/url-rewrite-module/creating-rewrite-rules-for-the-url-rewrite-module
<rewrite>
<rules>
<rule name="Rewrite">
<match url="^handler/uc=(.*)&Method=(.*)" />
<action type="Rewrite" url="usecasehandler.ashx?uc={R:1}&method={R:2}" />
</rule>
</rules>
</rewrite>
Related
concerning IIS Rewrites.
I want to change this url on my local IIS Instance
http://localhost/MySite/health?key=BczI5MyulpRLxI2kiJmIXwLOm78r3qr8z2gwcsYTGR4=&c
to redirect to this url:
http://localhost/MySite/Health.svc/BczI5MyulpRLxI2kiJmIXwLOm78r3qr8z2gwcsYTGR4=/c
As you can see I don't want the incoming request to use
Health.svc/BczI5MyulpRLxI2kiJmIXwLOm78r3qr8z2gwcsYTGR4=/c
instead to use
health?key=BczI5MyulpRLxI2kiJmIXwLOm78r3qr8z2gwcsYTGR4=&c
The Health.svc is the WCF endpoint name, so I just want /health with the key and filter parameter at the end as shown.
Whatever I put in my web config rewrite it still doesn't work. I am rather confused what bit of the url to put in, as the regex seems to be valid as I can test it in IIS and online regex validators.
<rewrite>
<rules>
<rule name="HealthRewrite" stopProcessing="true" enabled="true">
<match url="MySite\/health\?key=([0-9a-zA-Z=]+)&([a-z])" />
<action type="Rewrite" url="MySite/Health.svc/{R:1}/{R:2}" appendQueryString="false" />
</rule>
</rules>
</rewrite>
How can I get this to work? I have got the rewrite module installed as can see it in IIS an also can see the dll is registered.
If you want to match the value of the query string in IIS, you need to use {QUERY_STRING}. Here is a demo:
<rewrite>
<rules>
<rule name="Test">
<match url="(Service1)" />
<conditions>
<add input="{QUERY_STRING}" pattern="(key)=(.*)" />
</conditions>
<action type="Rewrite" url="Service1.svc/{C:2}" />
</rule>
</rules>
</rewrite>
This is my web.config.
This URL:
http://localhost/Service1?key=getdata
will redirect to this url:
http://localhost/Service1.svc/GetData
For your last question, why add the MySite prefix? This is because the URL in the Rewrite URL will be used as the redirect URL. Notice that it uses back-references to preserve and rearrange the original URL pieces captured during pattern match. For Rewrite, all prefixes other than localhost must be provided in the Rewrite URL.
I managed to get it working with going to all sorts of sites as its not obvious at all.
They key seemed to put the conditions in and then a {QUERY_STRING} with regex which can then create the {C:1} and {C:2} groups that are pushed into the new rewrite
<rewrite>
<rules>
<rule name="HealthRewrite" stopProcessing="true" enabled="true">
<match url="^health" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{QUERY_STRING}" pattern="key=([0-9a-zA-Z=]+)&([a-z])" />
</conditions>
<action type="Rewrite" url="/MySite/Health.svc/{C:1}/{C:2}" appendQueryString="false"/>
</rule>
</rules>
</rewrite>
I found it confusing knowing what url to match but with a few simplified tests of just ^health I could see more easily and play around with getting the query string parameters. I had to provide the Rewrite with the /MySite/ prefix which is confusing as the match didn't need that!
I have the following setup in web.config file to remove the server headers:
<rewrite>
<outboundRules>
<rule name="Rename server headers" patternSyntax="Wildcard">
<match serverVariable="RESPONSE_SERVER" pattern="*" />
<action type="Rewrite" value="TestServer" />
</rule>
</outboundRules>
</rewrite>
But on validating with HTTP Verb: TRACE, I am still seeing the Server and Mime-Version headers in the response.
Can anyone help me here to fix this issue?
Akamai can remove the header using a behavior called 'Modify-Outgoing-Response'.
I am currently trying to set up various Jetbrains services for use via https by using an IIS reverse proxy. The complete intended setup should looks somewhat like this:
TeamCity: https://server.company.com -> http://server.company.com
YouTrack: https://server.company.com/youtrack/ -> http://server.company.com:1234/issues/
Hub: https://server.company.com/hub/ -> http://server.company.com:5678/hub/
UpSource: https://server.company.com/upsource/ -> http://server.company.com:9876
I have already gotten this to work, with some difficulty, for TeamCity and YouTrack by using the following configuration:
In IIS, I have a TeamCity website that serves as a redirect. The web.config of that site currently looks as follows:
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.webServer>
<rewrite>
<rules>
<clear />
<rule name="Reverse Proxy to TeamCity" stopProcessing="true">
<match url="^teamcity/(.*)" />
<action type="Rewrite" url="http://server.company.com/{R:1}" />
</rule>
<rule name="Reverse Proxy to YouTrack" stopProcessing="true">
<match url="^youtrack/(.*)" />
<action type="Rewrite" url="http://server.company.com:8080/issues/{R:1}" />
</rule>
<rule name="Reverse Proxy to Hub" stopProcessing="true">
<match url="^hub/(.*)" />
<action type="Rewrite" url="http://server.company.com:8082/hub/{R:1}" />
</rule>
<rule name="Reverse Proxy to UpSource" stopProcessing="true">
<match url="^upsource/(.*)" />
<action type="Rewrite" url="http://server.company.com:8081/{R:1}" />
</rule>
<rule name="Reverse Proxy to Collaboration General" stopProcessing="true">
<match url="(.*)" />
<action type="Rewrite" url="http://server.company.com/{R:1}" />
</rule>
</rules>
</rewrite>
</system.webServer>
</configuration>
In addition, I have configured the following server variables as described in the documentation:
HTTP_X_FORWARDED_HOST
HTTP_X_FORWARDED_SCHEME
HTTP_X_FORWARDED_PROTO
However, when trying to access UpSource via https://server.company.com/upsource/, all I get is an empty page titled "Upsource". No error message. Not even a Fav Icon. Accessing UpSource via http://server.company.com:8081/ still works as normal though.
I have also already tried running the following chain of commands:
upsource.bat stop
upsource.bat configure --listen-port 8081 --base-url https://server.company.com:443/upsource/
upsource.bat start --J-Dbundle.websocket.compression.enabled=false
However, that did just caused the problem to change to:
HTTP ERROR: 404
Problem accessing /bundle/starting. Reason:
Not Found
Powered by Jetty:// 9.3.20.v20170531
How can I set up UpSource to work like TeamCity and Hub are already doing?
Any help on this would be greatly appreciated.
With some help of a YouTrack support employee helping with a related YouTrack error, I was able to figure out the reason behind this issue.
The reason is this: When accessing UpSource via https using a path for the redirect, the path needs to be the same in both the http and https variants.
In short, this will not work:
https://server.company.com/upsource -> http://server.company.com:9876
But this will:
https://server.company.com/upsource -> http://server.company.com:9876/upsource
I got this to work by running the following configurational command on the upsource.bat in [InstDir]/bin:
upsource.bat configure --listen-port 9876 --base-url http://server.company.com:9876/upsource
Now I can at the very least connect to and log in to UpSource via https. There's still a problem, but since it's unrelated to the topic of this question, I will create a separate question for it.
Note: on IIS 8.5 set HTTP1.1 at ARR PROXY-Settings. Otherwise the websocket connects, but there's no communication.
upsource v. upsource-2018.2.1291
https://www.jetbrains.com/help/upsource/proxy-configuration.html#IISreverseProxy
I am trying to convert from using web.config on IIS to .htaccess on apache.
Although, i've got everything working, but got stuck on one thing.
<rule name="Imported Rule 2">
<match url="^blog/([a-zA-Z0-9_-]+)(|/)$" ignoreCase="false" />
<action type="Rewrite" url="index.php?url=blog&id={R:1}" appendQueryString="false" />
</rule>
I am trying to convert the above code into .htaccess.
If anybody could help, it would be gratefully appreciated.
Try to add this config to .htaccess
RewriteEngine on
RewriteRule ^blog/([a-zA-Z0-9_-]+)(|/)$ index.php?url=blog&id=$1
I am pretty sure that I have my WCF URL Rewrite Rule coded correctly in my Web.config file:
<rewrite>
<rules>
<rule name="RemoveSVC" stopProcessing="true">
<match url="MyWebSvc/([a-zA-Z]+)-svc/(.*)" />
<action type="Rewrite" url="MyWebSvc/{R:1}.svc/{R:2}" appendQueryString="true" logRewrittenUrl="true" />
</rule>
</rules>
</rewrite>
The rewrite rule seems to be working in the "Test pattern..." widget. For instance:
http://localhost/MyWebSvc/thinga-svc/majigs
gets correctly mapped to:
{R-1} thinga
{R-2} majigs
And I would like the URL to be re-written to:
http://localhost/MyWebSvc/thinga.svc/majigs
Seems simple enough, however, when I try to test the URL from a browser:
http://localhost/MyWebSvc/thinga.svc/majigs
works, but
http://localhost/MyWebSvc/thinga-svc/majigs
does not appear to be re-written, and I get a 404 response code. Do I have to configure the rule to be triggered with some other setting?