For the visual folks:
And at line 61:
Everything I'm finding on the web is one of 3 solutions for the problem:
The user is trying to use an interop assembly without Excel installed. I have M$ office pro 2010 installed. So that's not the issue.
I'm not typing it out but you can look here
Users are running the interop assembly in 64-bit, I'm on a 32 bit machine. So that's unrelated. But I did try compiling as 32bit only instead of Any CPU. Didn't help.
Basically fix #2 is for those running this code on a server and their code is executing under the ASP user account, in my case its a desktop app so this should be unrelated but in desperation I added "Everyone" to the permissions and gave them all privileges. Didn't work.
So now I'm turning to here. Any questions, comments, concerns?
Related
An amateur programmer has made a nice little program that works through VBA on top of a MS-Access2010 database. We are asked to make an installer for this database+VBA project. The code runs fine on any computer with Office installed, but on computers without Office we get the error above. On computers without office we install the MS-Access2010 Runtime, which is free, in order to be able to open the .accde file at all. But this does not prevent the VBA error.
I did some research on the issue but did not find anything related to this specific scenario. How can this be troubleshooted?
The problem was a version mismatch between the .accde file (sp1) and the installed ms access 2010 runtime (original) After upgrading the runtime to sp1 all was fine.
I'm not an experienced vba programmer and working with access is not my cup of tea. I've been asked to fix some errors in an MS Access 2010 VB application. The sole user previously ran the application on a 32-bit platform but now has migrated to 64-bit. This caused the aplication to break. I have made some progress but every issue I resolve another seems to appear.
The following piece of code
DoCmd.OutputTo acOutputReport, "rptQLDExport", acFormatRTF, frm.txtDirectory.Value + "\QLD\All\QDATA.DOC"
is causing a runtime error 2587: Microsoft Access can't complete the Output operation
I have seached on the net for an answer but to no avail.
My development environment is Windows 7 SP1 (64-bit) and the application is running in Access 2010 (vba7, 64-bit). I'm willing answer questions to provide more information. Any suggestion will be appreciated.
This forum post suggests it is related to runtime versus full versions of Access (or Office). The suggested solution is to Copy the file UTILITY.ACCDA from the ACCWIZ directory to the same directory as MSACCESS.EXE
You would need to check licensing before distributing the file in your application installer, obviously.
Update: On a machine that fails, copy over ProcessMonitor (from technet; no install required). Filter to your application. Repeat the process and get it to fail. Examine the files that your application is trying to access and why they fail.
I am creating an application using vb.net and access 2007. My OS is in 64bit, windows 7. I already change my TargetFlatform in to x86. But when I run the program error occured "The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine". I tried to search with google for a solution but no luck.
any help would greatly appreciated.
Thanks in advance
you must install Access Database Engine, see the following link
http://www.microsoft.com/download/en/details.aspx?id=13255
Regards.
There is a problem with Microsoft.ACE.OLEDB.12 when AccessDatabaseEngine x86 or x64 2010 is installed.
I have long attempted to use the SSMS (2005-2008-2008R2-2012) Export Wizards to export large tables onto Excel and I needed the AccessDatabaseEngine installed to be able to do that.
However, regardless of the MS Office version (2010, x86 or x64, or whatever it is), the 2010 version of AccessDatabaseEngine will not work towards registering the provider.
The solution is to download and install the previous one which is none other than the 2007 x86 one.
This one will work even if Office or SQL Server or VS are x64.
Download it from here http://www.microsoft.com/en-us/download/confirmation.aspx?id=23734
Now, any other propagated issues revolving around the notorious failure to register "the provider" on the local machine for the Microsoft.ACE.OLEDB.12 should be resolved by the above.
Feel free to paste me your experiences on this matter.
My company has a VB6 application using Crystal Reports 7 which a client has asked to be installed on Windows 7 32 bit. It is currently installed on Windows XP 32bit SP2 machines at the client. Connection to the DB is done via ODBC to SQL Server 2000 instance on another server.
On Windows 7, the installation works fine, however when you try to open the application, the error is given.
I have looked at the following:
Registering all the dll's and ocx files using regsvr32. Some will not register as they either are registered already or the following message is given "Make sure that "[name].dll" is valid DLL or OCX file and then try again." I read this forum thread regarding this: http://social.msdn.microsoft.com/forums/en-US/vblanguage/thread/0653f685-4526-45d9-89f3-8c479a6b4c62
Monitored the opening of the application using a ProcessMonitor application to try and spot if there is a missing dll or ocx file - this does not seem to be the case.
Reviewed the application according to this list and nothing seems to be against these guidelines
I've noticed two items in the knowledge base that relate to this
http://support.microsoft.com/kb/281848 - the comdlg32.ocx bundled with the application is version 6.0.81.69 and the one in the system32 folder on the dev machine (WinXP 32 bit) is 6.1.97.82. However if this was the issue then surely it would not work currently?
http://support.microsoft.com/kb/184898 - I'm not sure how to confirm that this is the issue
Finally, due to complexities, I am not allowed to make code changes to this application. Even if I was, I'm not a VB6 programmer, just the guy who got the terribly support project! If code changes are required, then I'll have to investigate using WinXP mode.
Update: I get the same error in XP Mode. That's a Win XP with SP3 VM. This runs on a Win XP SP2 VM, is there potentially something in SP3 that would have caused this to occur? Or is it just a fact of it being XP Mode?
I got the same error but I solved by using regsvr32.exe in C:\Windows\SysWOW64.
Because we use x64 system. So if your machine is also x64, the ocx/dll must registered also with regsvr32 x64 version
The file msrdo20.dll is missing from the installation.
According to the Support Statement for Visual Basic 6.0 on Windows Vista, Windows Server 2008 and Windows 7 this file should be distributed with the application.
I'm not sure why it isn't, but my solution is to place the file somewhere on the machine, and register it using regsvr32 in the command line, eg:
regsvr32 c:\windows\system32\msrdo20.dll
In an ideal world you would package this up with the redistributable.
This download fixed my VB6 EXE and Access 2016 (using ACEDAO.DLL) run-time error 429. Took me 2 long days to get it resolved because there are so many causes of 429.
http://www.microsoft.com/en-ca/download/details.aspx?id=13255
QUOTE from link:
"This download will install a set of components that can be used to facilitate transfer of data between 2010 Microsoft Office System files and non-Microsoft Office applications"
You say it works once you install the VB6 IDE so the problem is likely to be that the components you are trying to use depend on the VB6 runtime being installed.
The VB6 runtime isn't installed on Windows by default.
Installing the IDE is one way to get the runtime. For non-developer machines, a "redistributable" installer package from Microsoft should be used instead.
Here is one VB6 runtime installer from Microsoft. I'm not sure if it will be the right version for your components:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7b9ba261-7a9c-43e7-9117-f673077ffb3c
i get a HRESULT 0x80131047 exception in Microsoft Visual Basic 2008 express when debug my application. this happens whenever i click "start debugging" and it doesn't matter what application i load. this is a brand new vista x64 bit machine with a fresh install of VB2008 express.
This MSDN forum post says that you need to take "special" characters such as slashes, commas, or apostrophes out of your assembly name to avoid that error.
If that doesn't fix it, another suggestion there is to uncheck "Enable the Visual Studio Hosting Process" in the Debug tab.
It may not necessarily be special character as in my case...
This was a hard issue to troubleshoot as there may be many variables leading non-functioning assemblies.
So I was working on an Outlook Add-In 2010 targeting the 32-bit version of Office. Everything was working fine until one day out of the blues, the add-in wouldn't load anymore and I was presented with error "HRESULT: 0x80131047". After searching almost half-a-day I found a nice article:
http://blogs.msdn.com/b/astebner/archive/2007/05/06/2457576.aspx
I tried adding the assembly to the global cache but was unable to. Luckily, I had an almost identical project which ran just fine and I had already done comparison checks but all references and settings were the same, but on this pass I found something different ... as it turned out the platform target CPU was set to 64-bit so I changed it to "Any" and voila'! - problem fixed!
I was then able to run the project in Debug mode, Outlook launched and loaded with Add-in without a hitch.